My Tow Truck Isn't Just For Towing......

[@matthewkatz2411]

Recovering from surgery and not feeling well. Then the best thing today, a new Robby Layton video!!!! Awesome!!

[@davestevens4263]

And it's his was a good one that releaved pain , not made it worse. Lol

[@scuzzjumper]

Hang in there! After 9 orthopedic surgeries and dozens of broken bones, I feel your pain. Try to stay positive on your road to recovery and good luck!

[@bob3485]

Don't get me wrong. I'm crazy about Matt's channel. Roy's channel and Paul's channel.. but you and the boss. and Hillbilly. Just make this the best channel ever. And thanks for all you do, my friend. Nothing decent to watch on TV anymore. Thanks for putting out those videos. Gives me something to do. Thanks again.

[@rhllnm]

Don't forget the little boss with her jokes.

[@NANKEL1]

Totally agree. All I watch is KZbin from mechanical for enjoyment to recipe for my meal at night

[@justingould7348]

In all honesty you should use your OnX elite membership and buy a Warn front winch bumper for a ‘17 Superduty. They look sick on an OBS. 😬

[@schwartzenheimer1]

Robby, you're an artist! Being able to make that mangled fender look new again just blows my mind...also, the design and bending of that fairlead mount was pretty impressive. Great video!

[@loose-arrow-garage]

Robbie, I'm the part of the internet that doesn't care if you cut up that grill! Just keep doing what you do. I like how that bumper is looking!!

[@jeffclark2725]

Well said , He makes it we watch it

[@AFloridaSon]

I seen the wrecker in action on Owen's channel. Good job, but it really needs lockers. Good to see you do some bodywork. That's where you truly shine.

[@joepitts3638]

Robby check out swag off-road for your press brake. It fits into your harbor freight press

[@jacquestubeetvous4981]

Hey Robby, you can make press brake dies that work on your press. You essentially make 2 “v” that fit into each other then bolt them to the press.

[@denniswatkins4666]

As Hillbilly was trying to tell him.😅

[@kawrider750]

Beat me to the punch....use what you have, hydraulic press

[@peterbockholm3176]

You forgot that Robby have a tool problem, he wants at least one of everything. Just like Jay Leno and cars and bikes.

[@alexpearson8538]

I came here to say this too! And to see the MoClamps in action!

[@allenintexas]

even without a brake, you could have bent that a bit easier. Heat??? three little spots. But it turned out ok. Keep on truckin

[@garyfox33]

Definitely liked the old school bumper on the wrecker. I'd honestly add a brush guard around the headlights and corners of the front since you guys do a lot of off road recoveries in the woods.

[@codystepanian9558]

Being honest, those little project like the fender on the tractor are fun to watch. Something a common watcher may need to do on a home project.

[@funk7875]

It's nice to see you do repairs the right way. I've never been afraid of a hammer and dolly either.

[@williamr.kirkland6317]

Thanks. Like watching a skilled sculptor or artist engaged in rendering a private creation that comes from the heart.

[@jesseleesamples]

I actually really enjoyed the entire process of fixing the tractor fender. That’s a good example of something an average do-it-yourself-er could try to fix at home. I wouldn’t wanna attempt to fix a nice muscle car or a G-Wagon like you professionals, but id try a tractor fender, so watching the process for a repair like that is actually interesting and very helpful to me. I’d love to see more body fixes like that, where the end result doesn’t need to be perfect. It’d be awesome if you did a project where you teach how to do body work and paint on something at home that an average person can do. Like don’t use your best tools or your paint booth, just use stuff that most people can get or can afford. Keep makin the awesome videos though, love watchin you guys and appreciate the long hours and long videos you’ve been puttin out

[@cucina57]

What you did to that tractor was nothing short of amazing!!!

[@57WillysCJ]

Harbor Freight sells a 30 inch brake roller combo, so does Grizzly and Certiflat sells a small DIY that you weld together and add a bottle jack. Eastwood sells one that you use with your shop press.

[@rogerbrown91]

I'm impressed how well robbie has adopted the ford being the chevy guy he is

[@kimetherington2252]

The bumper is looking good! Robby you are a professional who knows his craft! Your body work is what everyone wants in an accident and wants it fixed like it came from the factory. Til next time, take care, and we'll see you on the next. 😊

[@m1cxf]

The more I watch your videos, the more I like them. You have your moment of fun and then you switch almost instantly to teacher mode, and you are so good at that. You manage to explain things in a manner which is both interesting without becoming boring to the more experienced, an incredibly difficult balance to achieve. On a slightly different angle. Have you ever tried lead filling? That would make an interesting presentation.

[@GuyChapman]

Ignore the haters: this bumper echoes the design cues of the front of the truck. Very cool!

[@jackrichards1863]

I don't know why a painter gets powder coating done? That stuff is soft for two to three years, flaking or scraping off pretty easy in those preceding years while its fitted. It doesn't "fall off", that's not what i'm meaning. Anyway. You do the steadiest straightest cuts freehand with a plasma that I ever have seen Robbie.

[@DieselKevcop]

I could watch Robby videos daily. Always look forward to his new drops. 💙💛💙

[@tmacie2]

SWAG Offroad for your small brake needs!

[@genejones7124]

Enjoy the detailed filming. So many sites fast forward through interesting procedures

[@JRs-Garage]

Fred’s looking awesome,keep doing what you’re doing we love it !

[@saintracheljarodm.holy-kay2560]

That works, have a good day and count your blessings amen.

[@larryfisher5796]

It is great to see someone do body work .I'm 79 my Dad and I did body work back in the 50s good job 👍

[@drunkchicken8636]

I really enjoyed the tractor body work. Also, you do so much more than others realize when fixing cars, Yo have to know so much extra and pull motors and put everything back. We the customer think you just pull parts off and fix, repaint, but that other stuff we seem to forget. Awesome job!

[@MikeBaxterABC]

15:25 Just for the record :) ... the "Mo-Clamp Deep Hook" is Forged out of Alloy Steel for maximum strength and durability!

[@808SSCamaro]

That's a lot of work for a tractor! It must be a show tractor 😀 With as much cutting of the wrecker bumper, you might as well have started off from scratch 😀 Thanks Brothers for sharing! Take care! Eddie

[@terrymitchell7714]

You guys are like the A-TEAM, I love it when a plan comes together. Nice bumper

[@scuzzjumper]

Tools I need for Auto body repair: EVERYTHING.

[@clipper1083]

You say that your not that good with the plasma table but you do awesome work with it and have impressed me with the work you have done on it over the last 6 or 7 months that i have been subbed to you. Also I seen the video from Owen Barlow (it came up in my feed due to your name in title) where you used King Fred to recover that rolled over crawler for that guy and I think you should do a video Collab with that Owen Barlow where you show him how to use a body puller to help straighten some of the bad parts of that crawler. Videos where you show how to do body work are some of my favourite 👍

[@maxironpaw]

Good variety here. Fab and body work. Nice.

[@donwilliams3626]

That tractor is going to look as good as new . . . Oh, it is new!

[@esbyota]

swag offroad press brake! When you’re at it send me one too please!

[@Wholistichillsfarmandbeyond]

I’ll take on too while you’re at it!

[@chiliman321lb]

you got Madd Skills bro...can't wait to see what you do to that 57!! Thank you for sharing...

[@xxBlazinBobxx]

Liking the new sleeker front bumper! I'm sure better for off-road use. So much cool fabrication on King Fred! Maybe your channel should be "Robby Layton Fabrication Nation." 😁

[@michaelchaney5631]

Robby, you leave that emblem and grill alone. Chevy guy here and props must sometimes, and only sometimes be given. She's (the truck) earned it at her age. Tell all those haters to pound sand. Work horses live up to the standards.

[@gonzalez7805]

Omg , the them orange tractor wheels would be awesome on the treker....

[@mattc.310]

The tow truck grille and bumper mods look awesome. That winch fits like a glove. Can't wait to see what else you are planning for the bumper. Nice work on the Kubota. Hopefully, the shipper foots the bill for the repairs so the dealer doesn't have to eat it.

[@arte9855]

You got me 😊 I no sooner finished typing and Hillbilly said it outloud...Use that press in the background as your press brake.

[@johnkranz4004]

The bumper is looking very good Robby Nice job on the tractor Guys

[@TheOldaz1]

Fred's front is starting to come together nicely and nice job on the tractor. Thanks guys.

[@tomhendricksen1805]

Robby, you do have a press brake. It is right behind you in the video where you are asking if anyone knows of a press brake. With a couple of accessories, the press behind you can be set up to fold thicker steel. If you put little nicks in the CAD drawing you will be able to align your bends easilly.

[@catdog8641]

Great Job 👍❤. Can't wait to see what else you are going to do with King Fred. One ton wrecker look so nice 😅. And like the testing of things it's helps us out greatly. 😊 Thank You 😊

[@gonzalez7805]

These have to be the most entertaining body work tutorials available..... great show guys...

[@kimwatchman644]

Welding trick, those cotton cowboy gloves. Wear them inside your welding gloves for insulation to protect your hands from the burning heat.

[@psg6314]

Great video and I replaced the grill on my 96 f250 with a tube grill after a deer strike and stay safe and God bless from GA

[@randallparker8477]

As you were talking about needing a press break we could see your hyd press behind you, you just need some big v blocks of different angles.

[@jeremyjoyce8637]

Appreciate the shot of the Wonderbread car in the background.

[@opendstudio7141]

Curious Mo-Clamp test; stuff used in the hidden world of metal manipulation. Might be interesting to see some of the tools in that kit demonstrated. Like what situation the corner tools would be considered for frame work.

[@CorvetteBill364]

I will tell you what If I needed for work to be done on my cars it would be you Robby Layton. You are a Artist !😊

[@w0qnx598]

Wants a small brake. @1:29 you see that thing setting right over your shoulders???? V blocks and a push block you got a small brake press.

[@brianconn2727]

Swag offroad for the press break. 19 inch and works with harbor freight press. I switched my jack on press to a hf pneumatic jack. This set-up works great.

[@kencrouch668]

The body work on the tractor was interesting!

[@swimmer6890]

SWAG off road makes a press and a finger press that fits the HF press you had right behind you when you said that. I like mine. Actually used it to make my winch bumper as well.

[@wrtrmike]

When you make those long straight cuts, use a piece of flat strap clamped or tacked as a guide to run your plasma cutter along.

[@jon_craftingo.o4686]

Thanks for another nice video without scripted plugs! Earned a like and a comment from me!

[@berlynreed4253]

I bet with some scrap metal and a bottle jack, you could build your own press brake! My ex brother in law and I built a roll around portable frame straightener out of an old engine hoist! Worked great for back in the 70s!!

[@SchysCraftCo.]

This project is coming along very well there. Can't wait to see more updates an projects and many more videos soon my friends. Keep up the great craftsmanship and hard work my friends. Fab On. Weld On. Keep Making. God bless.

[@RobbyLayton]

Thank you!

[@douglasrdeaton]

You guys are my favorite tools, 😂😅😊 Thanks for sharing ❤

[@rhondasweeney7271]

Time will come. Thanks again for sharing 😊

[@artyart31]

I usually click on Fabrats videos first then Matts of road (depending on their content ill finish the video) and Robby's, but today Its Robby's first because I see wrecker content.

[@damienm2333]

Robbie, you are a brilliant tradesman. Great video

[@1944chevytruck]

GOOD JOB!

[@MagentaRV]

1:15 Use the press that's right behind you. LOL

[@stephenprosser2621]

U have a press break right behind you. Your harbor freight press build some removable brackets to put on it and BAM press break!

[@K3NnY_G]

1:15 - Check out the Swag Off-road finger brake. Think it's exactly what you're looking for right now.

[@paulrivers7248]

20:50 i was thinking the same exact thing "dont give hillbilly any ideas"😂 then Robby said it lol

[@donmadere4237]

Swag offroad sells a great press brake kit that works on your existing press. I’ve had one for years works great

[@MikeBaxterABC]

The old grill looks GREAT .. I would have notched it the same myself! :)

[@lonhoschar1943]

Nice job on the bumper!! It's looking a lot more "modern"!!!

[@tontogibson]

You have a shop press, look up make and model ya can usually buy brake fittings for it! Or a few pieces of angle and some time and make it!

[@UncleGo67]

You should put a Quick Disconnect for Jumper Cables…? Love the Old to New Projects…😎👍✅

[@abelvalle6188]

Metals easier to shape when its hot. Great vid thank you

[@wiliberty4x4]

I would like to see king fred get painted! You guys are inspiring! good work

[@cfs176]

Robbie, try using a straight edge with your plasma torch, it will make your cuts look amazing.

[@UncleManuel]

Oh you're getting straight lines mit a straight edge? What a shocking surprise! 😁😁😜😜🤘🤘

[@guypehaim1080]

With some angle iron, you could use your hydraulic press behind you to bend some light stuff(3/8").

[@DavidTollison]

Swagg Offroad sells a great small heavy duty press break. I bend 1/4" mild steel on a reg basis

[@davestevens4263]

For some reason relieving metal & working back into shape is rewarding. It's a form of artwork! I do miss that part of auto body work . & I was good at it .

[@ItsVisionsYT]

show more painting!!! paint kitchen & paint booth stuff!!💯 keep up the good work love your videos man

[@jw2218]

Great video Robby. It was cool watching you fix the tractor fender, I know if I was a customer I would be disgusted to see my tractor like that.

[@timparker7885]

SWAG Offroad makes a DIY finger brake kit that fits in the HF 20 Ton press, so it will bend anything that fits between the uprights of the press.

[@northjohnston8642]

Even tho it was kinda bulky. That big bumper woulda been nice too stand on if ya had too work on something. Also coulda made some tool holder on it as well. Or corners could have been boxes. For ropes and all that.

[@davidcolesr.8628]

Young Man, You are Living the Good Life, Steve & I Share in the Wisdom Dept. But you are Wise beyond your Years in my opinion. Quite an Empire the Boss is Building 😂, I know who wears the Pants Layton! I’ll catch you on the next one, Keep it Safe Out There Sir

[@TrevorDennis100]

I'm so impressed with Robby's panel beating skills. He made it look easy but it really isn't.

[@goatskullrebellion4800]

This channel just gets better and better. Keep up the great work! 🤘👍💪

[@MartinRodriguez-yr4gf]

for that heavy grinding, get a 9 inch grinder. The best being a black and decker wildcat

[@noonehere1793]

GREAT JOB CUTTING UP THE FORD GRILL!👍👍👍👍👍👍building something out of nothing is a true art….and when you start with a ford you are pretty much starting with nothing ….

[@matthale571]

Great work on the bumper

[@anthonylee2099]

Love your metal fender work video, old school style. Great job Robby and Hillbilly 🤙😎

[@COM70]

Man you are really quite good free hand with that plasma cutter ❤

[@tjsr.6053]

Since you have easier access to the headlights, either get halos or clear headlights with LED light bulbs since y'all got the high amp alternator

[@paulrivers7248]

At 18:00 it would be cool to see yall do more of these kind of tests lol

[@sim2do]

You have a bering press now 2 bits of angle iron and whalaaaaaaa a press brake

[@bryduhbikeguy]

>'Electric Lockers'

[@uoobwatcher]

Trekker tires! Tell him Demri.

[@guypehaim1080]

You can go on line and get plans for a pree brake and build your own.

[@jonnieters2306]

I like all the videos you post the bumper on the Ford cutting it and putting the winch in looks good 👍