The XPG Starker Review Build and Live PC Build Guide! | Robeytech

[@RafitoOoO]

That PSU is awesome. There's a channel here in Brazil that test PSUs and try to explode them, the Core Reactor passed with ease always turning off without damaging anything when they forced it beyond its limits. I bought one because of that.

[@tiggermcgee0476]

Amazing build! Its nice to see these case reviews, whether they are just ok, or maybe the best case ever. Keep up the great work!

[@RobeytechLive]

Thanks!

[@TheFeintNASS]

Not gonna lie. This XPG stuff looks so sick.

[@hrbomber594]

Honestly is a nice case, the front panel does give it a nice lil look, kinda cool that it is magnetic if you just wanna take it off. Overall not too shabby and just enough room to fit that GPU lol... Great Vid as always!

[@StupidLuck]

So I bought a 3 fan 3060ti and a 360m liquid cooler. Do you think I’ll have spacing for that?

[@Xpr0fi]

Can u put a 360mm kraken z73 AIO in this case????????

[@roadczar]

@Robeytech Question... will MSI 3090 SuprimX (336mm) and 280mm AIO (top mounted) fit with front fans mounded?

[@SR-vz9nq]

What a great form factor!

[@dodaal8069]

is the led on the front side of the case controllable?

[@pezzleyy9300]

btw 3070 are in stock in amazon rn

[@chimichanga6123]

Please help me is the glass display on the right or left?

[@eliasvirus2011]

damnnn that was fire brooo👹

[@RobeytechLive]

Appreciate it!

[@farmerpandasyoutube4800]

i am living in mx and looking at a cheap case and this one looks like a really good option, theres also some by Ocelot like the "Ocelot Gaming Gabinete OGEC02." but i cant say i am familiar with that brand. would you say this case is a good investment still or would you recommend another model? @@RobeytechLive

[@yashovardhangupta6000]

i have the same case but i am unable to get the led lights given on either sides of the front panel to light up ... there is a 3 pin cable labeled VG OUT hanging loose... wat do i do help please :(

[@2011amrish1]

Same problem i m facing with this case...still i m not sure how to light up these strip led lights..

[@Camromulus]

If only the guy making the build video explained it. Ya know, like any reputable PC Builder on KZbin does. By chance did you ever figure it out?

[@labm4098]

HI, I would like to ask if you can send the recommendation of this Table, the one you can adjust the Height, thanks!

[@josearmandopalmasuarez5077]

I have a 6750 xt of 32.3 cm long, do you think it would fit in that case? That build looks sick

[@leodaking]

How are you getting graphics card, I am building my first pc at the moment and man I can't find a 3080 anywhere.... Makes me sad

[@jrrrodney2048]

I almost got scammed for a GPU, the amazon third-party company was going to send me a picture of the GPU. Not the GPU itself. Make sure to read the abstracts at the bottom of the page if you consider any online purchases. Happy Hunting

[@RobeytechLive]

I reuse cards a lot

[@nirhawk]

the 3.5" hdd cage drive at the bottom of the case is removeable ?

[@95RaJPuT24x7]

why quad channel ram? when it supports only dual channel

[@doskeko]

Glub Glub Glub! lol Love te review, very good!

[@xperia7065]

Great video thank you

[@807-David]

What's the best Motherboard for a Ryzen 5950x

[@adryanpatrciotrevino7785]

how do i install the top fans?

[@mrbabygaming]

Amazing video beautiful build love him

[@RobeytechLive]

Thank you!

[@munishkumarawasthi8248]

Bro can upload on video of xpg cables connection

[@pizzapuntthomas]

can you please do a build with 3060ti founders in the be quiet pure base 500dx (black edition) case and maybe some more be quiet components like psu and cooler

[@igotwaffles5947]

May wanna check thermals, everything is running red, that might mean it's 🔥. Nice build.

[@RobeytechLive]

Lol

[@tajuki5714]

Yo how can you get these cards man. I have been trying to get GeForce rtx 3070 aorus master for so long now

[@ChiLL4Future]

Nice Review, thanks a lot, clear most question .. but after the review one question left :P it's possible to change color of front by connect with mainboard or is fixed with frontpanel and button? best regards from Germany :D

[@caiobemacedo]

I have the same question. I bought the starker air version and even though the 5v is connected to the motherboard I can't use the asus software to change color. Only pressing the button. (I could if connecting by other means)

[@evelingiglio3984]

​@@caiobemacedo press the button until ligth blink and now you can control the light with softwares.

[@Justin_80]

XPG/Adata make really good quality stuff imho.

[@RobeytechLive]

Yeah it’s a good case, you just need to be into the look!

[@menamesframerate9136]

How do you get all the 30 series cards for like every build?

[@RobeytechLive]

I reuse them.

[@xkramer9072]

I pressed the RGB button on the case for about 3 second and it stopped working (the case/fan rgb lights)

[@xkramer9072]

Just had to disconnect it from the current and it worked again

[@evelingiglio3984]

When you do that, you can control rgb with software like Aurasync

[@yaita.lizcanor.7624]

@@evelingiglio3984 Do you know how long I looked for how to do it? You’re the best.

[@Glass.authority]

How do I get ahold of u to have a computer build?

[@TimLongson]

I have a suggestion for a video: Full Tower vs Mid Tower - have full tower case manufacturers lost the plot? There are a huge number of"mid tower" cases which can fit three or more 360mm radiators at the same time. But if you look at "full tower" cases, which are supposed to be bigger, nearly all of those are designed for only 360mm radiators as well - at most they seem to offer one 420mm radiator slot, and even if they say they have multiple slots for 420mm radiators, when you check, they DON'T have the room to have more than one installed at a time! If mid towers are 120mm fan based, going up to 360mm radiators, then surely, by logic, the reason to pay the extra to go to full tower is to switch to quieter and more efficient 140mm fan based systems which can hold three 420mm radiators at the same time? If full tower doesn’t give full 140mm fan and multiple simultaneous 420mm radiator support (at least 3 at the same time), in the same way that mid towers already give full 120mm fan and multiple 360mm radiator support, then what’s the point in them even existing? Why would anyone buy them? Is it that much of an ask for get case manufacturers to add a couple more centimetres of room to fit these in so enthusiasts can have a zero thermal throttling solution to their overclocking top end thread ripper CPU and GPU custom water loops?

[@tharuka8130]

Im living in srilanka.i want to know why newegg stopped shipping goods to our country. do u know about it Robbie 😢.im waiting for a good reply

[@moodlessninja1386]

How to have pc?

[@shadirwayssaty3962]

how much did it cosy

[@RobeytechLive]

Parts list is in the description.

[@pezzleyy9300]

Can you please do a pc build with these part because I'm going to be building my first pc and these are the parts.

[@pezzleyy9300]

EVGA RTX 2060 EVGA 100-BR-500-K1 500 BR, 80 bronze 500 watt XPG Starker NZXT Kraken x53 Rob 240mm samsung 970 evo 1tb ssd Seagate BarraCuda 2tb internal hard drive B450 tomahawk max RYZEN 5 3600x Crosair vengeance RGB PRO 32gb (4x8gb) DDR4 3200Mhz C16 desktop memory white

[@caidenhodor5137]

Does anyone know a graphics card that would be good for this build? Or any changes l should make my budget is $1500 Case - Corsair icue 220t rgb airflow $104.99 Motherboard - Msi x570 - a pro $159.99 Processor - Ryzen 7 3700x $329.99 Ram - Corsair vengeance rgb pro 16gb $96.99 Ssd - Samsung 860 evo 1tb $109.99 Ssd - Samsung 970 evo 1tb $144.99 Power supply - cooler master MWE gold 550 v1 $89.99 Fans - Corsair icue sp 120 pro rgb 3 pack $72.99

[@hungrymonkey2478]

Sometimes I like watching people build there dream pc and Pretend that’s me 😔

[@breakingmad2645]

we’ll get one soon bro

[@shadirwayssaty3962]

cost

[@BuzzKiller23]

I thought it was the Birfenix Enso for a second

[@darkraven656]

Jk keep up the good work

[@RobeytechLive]

Thanks!

[@siddiqjamaludin991]

Day 2 asking for this King for a pc 🥺

[@bhanukamaddumage3802]

AIAIO 😀

[@skysinful]

You should make X pattern with the thermal paste - proven to be the best way - google it.

[@RobeytechLive]

Actually even spread of the Thermalpaste is actually best for heat transfer. The X is just a way to do it, but usually results in to much thermalpaste. You need just enough to transfer between the plate and the IHS. We tested it 😀

[@PACNM]

STARKER

[@RobeytechLive]

Sigh we had a massive autocorrect issue. We are fixing it thank you.

[@akra9530]

Wooooooooooo

[@carterrrrr4137]

Hey !!!!

[@Adedoyin1]

heyo

[@monkey_4202]

Real or scripted from companies

[@samyr.6216]

hi bye

[@adrianamorenoramos1668]

HELLOOOOOOO

[@Lbwato]

Hi

[@monkey_4202]

Do u buy or get shit free

[@Camromulus]

I'm sorry, but if you're gonna do a build video, you shouldn't be just blazing right through everything and not explain what goes where. I watched this whole video and still don't know what the damn GDV cable does or where it goes and what that weird two pin IO cable is and where it goes.

[@DeanGAshley]

The old McDonald AIAIO thing is infuriating.. this could be such a good channel if it didn't have dumb things like that in EVERY video.

[@bobtheblobfish9943]

stop malding🤣