Great Video Rob, been following your Viptela series hope to see more in-depth videos.
@floriancokl31423 жыл бұрын
Thank you very much Rob for this wonderful series - fantastic job
@dennissutphin5694 Жыл бұрын
great stuff glad i found your channel.
@creaakz3 жыл бұрын
Thanks for the vid man, amazing!!
@floriancokl31423 жыл бұрын
vSmart - is functioning comparable to the BGP-RR - fantastic conclusion. It's what popped into my mind - and then you spread the word. Thank you Rob
@borisavezov29893 жыл бұрын
Completed Lab 6, Thank you
@nab3609 Жыл бұрын
Thanks a lot Rob
@MinaAbiskhiroon2 жыл бұрын
Rob, Thaqnk you!, great content as usual. What is the screen notating program do you use please?
@RobRikerTechChannel2 жыл бұрын
Ink2go, it's paid app, like $20 USD for a life time license.
@MinaAbiskhiroon2 жыл бұрын
@@RobRikerTechChannel Thank you Rob!
@stevenwilliams77742 жыл бұрын
Is there a section on TLOC-Extension?
@ali_HA244 жыл бұрын
Another grea8 video. Please could you explain more as to how vSmart is receiving 4 routes from the peer 10.3.0.1 and sending 6 and receiving 2 routes from the peer 10.4.0.1 and sending 8 (video time at 29:45).
@RobRikerTechChannel4 жыл бұрын
For every TLOC created in VPN0, by default you will advertise all known connected/static routes by default via OMP to vSmart. If you have 4 routes to advertise, and 2 TLOCs to send those routes via, then the vSmart will learn in each route twice, so a total of 8 route advertisements, 4 routes out 2 TLOCs equals 8 total route advertisements.
@adrianmxmx4 жыл бұрын
Can you pipe the outputs via 'sh int | tab' to have the table output. You should be able to use '| tab' on most shows.
@yasinakn793 жыл бұрын
Thanks Rob.. I have already joined the membership, but I have accessed only MPLS,INET and DC-SW config in the google drive. Where are other devices' initial configs ?? thanks.
@RobRikerTechChannel3 жыл бұрын
That's all you get, you can mix and match to meet your lab needs.
@yasinakn793 жыл бұрын
@@RobRikerTechChannel I see during the video and I realized your sensible way. Thanks Rob !!
@joyantadebnath27972 жыл бұрын
hi rob, what is the name of the software you are using for on screen writing?
@RobRikerTechChannel2 жыл бұрын
Ink2Go.
@joyantadebnath27972 жыл бұрын
thanks a lot
@stevenwilliams77742 жыл бұрын
Should interfaces all be in their own VPN? What is the do's and dont's of putting multiple interfaces into a single VPN?
@RobRikerTechChannel2 жыл бұрын
In most cases all interfaces in a single VPN unless you need segmentation.
@stevenwilliams77742 жыл бұрын
@@RobRikerTechChannel Ah so like customer segmentation as we would do with VRFs and MPLS.
@stevenwilliams77742 жыл бұрын
vEdges seem to be sending omp routes but not receiving any? where do I need to look?
@RobRikerTechChannel2 жыл бұрын
I would start with vSmart.
@stevenwilliams77742 жыл бұрын
@@RobRikerTechChannel This was it. vSmart needed a reboot.
@johnsonjohn22644 жыл бұрын
Hi Rob, thank you for the great videos. Can you please share your eve-topology too?
@RobRikerTechChannel4 жыл бұрын
yeah, i will.
@johnsonjohn22644 жыл бұрын
@@RobRikerTechChannel Thank you
@saidt34684 жыл бұрын
Please Where??
@robinjacobk78294 жыл бұрын
@@RobRikerTechChannel Great video could you please share me this topology
@MMLAB4423 жыл бұрын
Rob, can you provide initial configs of switches and routers? I use your topology, but I prepare initial config by myself after every lab. Please share with me init configs.
@RobRikerTechChannel3 жыл бұрын
Become a member, then you'll have access to the topology and initial configs for INET, MPLS, the other devices are configured during the videos.
@MMLAB4423 жыл бұрын
@@RobRikerTechChannel I signed to your channel. I have access to the topology, but there is no init config.
@nabeehhn40903 жыл бұрын
@@MMLAB442 hey please mr have you got the config ??
@MMLAB4423 жыл бұрын
@@nabeehhn4090 I did initial config by view "show" command's outputs in every video
@shahidsouad4 жыл бұрын
sub-interfaces does not work on vEdge-cloud. However, it does work on ISR4000 Series with sdwan image. It is limitation of vedge-cloud. i.e vpn 1 , int ge0/2.13 -- will use dot1.q encapsulation of vlan 13
@adrianmxmx4 жыл бұрын
For sub interface to work, you would need to place the physical into VPN 0. Next you place the sub-interfaces into VPN 1-511.
@jonallan1214 жыл бұрын
10mins in , regarding subinterfaces... I vaguely remember having to put the main interface (of the service VPN sub interfaces) into VPN 0 before it allowed the subinterfaces to actually work. Give it a go. Let me know if that works for you.
@jonallan1214 жыл бұрын
The Dark Knight Yeah, I discussed it a little further with Rob on twitter and my experience was with an ISR and not a vEdge, I assumed they would have been the same but it doesn’t sound like it. :)
@joshuawang69533 жыл бұрын
Hi Rob, just a quick question, if I add connected/static route in VPN1 at vEdge1, the routes shows on vSmart as received but not sending, until I got another site's vEdgeX also got the same VPN1 build, is this because vSmart need to see the same VRF(VPNX) tunnel be established?
@RobRikerTechChannel3 жыл бұрын
Yep, if you need/want static routes, you'll need to configure all sites necessary for the propagation to happen.
@adrianmxmx4 жыл бұрын
For sub interface to work, you would need to place the physical into VPN 0. Next you place the sub-interfaces into VPN 1-511.
@marianomartinez5937 Жыл бұрын
Yup, I did the lab and it works, per documentation, I guess the sub-interface on "vpn 1" requires "mtu 1492"
@MMLAB4423 жыл бұрын
Please share init config of switches and routers in text format. Does anybody have?
@HaiderEdits3594 ай бұрын
please change backgrond in your next videos it is not good but this is informative series
@RobRikerTechChannel4 ай бұрын
This series was recorded years ago, nothing is gonna change.
@goharali93972 жыл бұрын
Hello Sir, How are you, I like you channel and recomend for every one its a very best channel for SDWAN learning, Sir if you don't mind could you shere this topology with me. thank you very much. CCIE # 47481 HCIE # 9339