Finally a High Quality Affordable Cab - Curtis Advantage Cab on a 2038R John Deere

Finally a High Quality Affordable Cab - Curtis Advantage Cab on a 2038R John Deere
Check out this long term review on the cab
• Curtis Cab Long Term R...
and this full install video
• Curtis Advantage Cab F...
In this video I show the new Curtis advantage cab on my John Deere 2038R. It has removable steel doors, a removable back glass, venting front windshield, front and rear windshield wipers, heater, dome light, LED work lights, fuse box, control panel, and can also be ordered with different door options.
Please subscribe to our channel here: / rockhillfarmandhomes
Follow on Facebook at
/ rock-hill-farm-1020506...
visit our website at www.rockhillfarmandhomes.com
You can now support the channel by buying us a coffee at the following link:
www.buymeacoff...
outdoorgans, #outdoorgans
If you are interested in the camera equipment that we use in our videos here are the direct affiliate links.
Cameras: amzn.to/36oeTEr
On camera mic: amzn.to/38soixz
USB Mic: amzn.to/2JXkKcs
Tripod: amzn.to/3eN0XHR
You can also visit our website at www.rockhillfarmandhomes.com
At Rock Hill Farm and Homes we upload new videos at least 3 times per week, about our 20 Acre hobby farm, our John Deere 2038R compact tractor and other equipment, and the businesses that we run.
These businesses include a manufacturing operation, a Christmas tree farm, real estate investing, a lawn care business, and an online retail store. I demonstrate how I am able to use these ventures to earn a good living without a traditional job.
We have some cool toys and always think outside the box on our little homestead so come along for the ride.
You can expect new videos from us every other day, usually around 8 AM.
Thanks for watching and please subscribe!
/ rockhillfarmandhomes
Brock
We participate in the amazon affilitate program and other similar programs which may or may not compensate the channel when you click our links. This compensation is how we are able to continue producing this content

[@RockhillfarmYT]

Check out this long term review on the cab kzbin.info/www/bejne/d36pp3Spj9Ghb5Y and this full install video kzbin.info/www/bejne/fKmWoaGfmcyHiNk Thanks for watching

[@gilbertbissell5313]

Great video! I've had a Curtis cab on a John Deere 4300 for three years. Very well built, easy to install. Definitely get the optional lights and switch box. I snowblow a three mile road in NW Montana, it was -20 last week. The wind shifted and turned the tractor into a popsicle, the windshield stayed clear with the Curtis heater. I run with the heat on and door windows open and stay plenty warm. We remove the doors during the summer, I've never regretted not having AC. \

[@RockhillfarmYT]

Thanks for the feedback. I just finished the install yesterday so I don’t have much experience with it but Everything you said sounds right to me

[@mark-ew8hk]

like the cab glad to see you cleaned up the 2038

[@RockhillfarmYT]

Thanks

[@mark-ew8hk]

@@RockhillfarmYT I would like to see a view more out the cab looking down at the loader &front view.

[@RockhillfarmYT]

I’ll make sure to have that view in my next tractor video

[@xdude2x]

Have the premium cab on my BX, couldn’t imagine not having it. I have never once wished I had A/C. Thanks for the video

[@RockhillfarmYT]

Thanks for watching

[@RockhillfarmYT]

I agree

[@leokelly359]

I have a the same Curtis cab on my 1025 and I'm really happy with it

[@RockhillfarmYT]

Thanks for the feedback

[@MyClutteredGarage]

Looks great, Brock!

[@RockhillfarmYT]

Thanks Not as good as you ramping that old truck

[@MyClutteredGarage]

@@RockhillfarmYT haha!

[@watkinstreefarm6880]

Once again, pretty awesome!! That is quite the upgrade!!

[@RockhillfarmYT]

Thanks

[@ritterjon]

💥 Very nice Brock! I love how easily the doors come off. That will help keep the summer sun off you as well. Great vid 👍 *Keep on tractoring!*

[@RockhillfarmYT]

Thanks. Coming from the guy with the coolest cab on KZbin

[@jimhaugh6851]

Great its about time I had a metcab on a 4wd cub cadet and vinyl doors was great

[@RockhillfarmYT]

Yeah, I’ll be showing the other two door options on an upcoming video

[@leokelly359]

@@RockhillfarmYT do you have a video on your brush guard modification you did

[@RockhillfarmYT]

@@leokelly359 Yes sir. I have a friend who does fabrication and I went over to his shop and filmed the entire process of building it and installing it If you scroll through the channel that video is probably three or four weeks old

[@HardyBrothersOutdoors]

nice addition. When I was buying my 4052R I was debating a cab, just couldnt commit to the higher price. Maybe an add on is in my future....

[@RockhillfarmYT]

It’s definitely more budget friendly than the factory cabs

[@rodbagley1686]

Liking the cab.

[@RockhillfarmYT]

Yeah, I’ve been happy with it

[@rodbagley1686]

@@RockhillfarmYT I was out in the woods this afternoon. Working my way through the trees was kind of a challenge even without a cab. Sure like the idea of it in the winter time. Not do much for what I was just doing. Maybe a second tractor!!!!. I can dream!

[@RockhillfarmYT]

Watch the first part of this to see how I abuse the cab in the woods Brush Hogging In the Woods - I Really Needed a Bulldozer for This kzbin.info/www/bejne/eHisqWZ5qNiqnpY

[@FlatCreekOutdoors]

Doesn't look bad at all! Matches perfectly, too.

[@RockhillfarmYT]

Thanks. It’s going to take some getting use to driving a cab though

[@anthonyg6924]

Really nice!

[@RockhillfarmYT]

Thanks. I’m impressed with it

[@peterkober6758]

Brock we have a All steal Curtis cab on my BX 2370 cab is great we a little more glass on doors but no removal rear window beats the wind and snow in winter and off with doors in summer thanks God Bless All PaK

[@RockhillfarmYT]

Yeah, it would’ve been nice two weeks ago when the temperatures were brutal

[@leestarling2671]

Nicely done, great information. 👊

[@RockhillfarmYT]

Thanks

[@bikeman5]

I did not see this before buying my original cab from OCC. I only go 1200 into mine so it was good for my budget. however I got to remove it for backhoe use and for storage as I don't want to bang it up or rip it. I may have spring for 2300 option had I saw this before. Oh and I have the 1026R not sure if they make this for that model.

[@RockhillfarmYT]

I believe they do. I know they have it for the 1025

[@MXBmateo]

My grandad worked for Curtis

[@RockhillfarmYT]

Thanks for sharing My experiences with Curtis have been great

[@NRFA21309]

Can I get one of those for a 1025r? How hard was it to install? Great video thanks. When are you going to upload the install of the cab? Can't wait to see step x step on how to install the cab? I love the fact that the doors can be locked like a vehicle. Did you order it at the time you purchased it, or after? Where did you order the cab from?

[@travispohlman669]

Does this cab work if you have a single point hydraulic connector for your front end loader?

[@RockhillfarmYT]

I think so. Might want to verify with Curtis before putting in an order but I think it’s compatible.

[@rickvaughan8993]

Interesting video Thanks

[@RockhillfarmYT]

Thanks I’m really impressed with the cab

[@travispohlman669]

Great Video Brock. Say what is the height from the floor to the top of the Curtis cab? Can the ROPS still be lowered with the cab on? For my situation I cannot fit my tractor in through the garage door with the ROPS up, but if I could put it down and have a cab like this on it and it would fit that would be awesome. Thanks!

[@RockhillfarmYT]

The Rops go up and down the same way. It is not affected by the cab The top of the cab is 83 1/2 inches on mine. Your tires could affect that height if they are not R4 like mine Curtis states that it is 60 inches above your floorboard. My floorboard is 26 inches high so it actually seems like it came out a little lower than they state My garage doors are not standard. They’re actually quite short at 78 inches so mine will not go. I’ve never put my tractor in the garage so that didn’t matter to me. I have another building for it My truck only clears by 1 inch

[@travispohlman669]

@@RockhillfarmYT 60" off the floorboard. Thats probably a better measurement. Like you said, to many variables below that. Thanks Brock.

[@rodneyscrivner2504]

Boy thats a nice addition Brock, your going to get spoiled in that cab... Lol

[@RockhillfarmYT]

Yeah. It’s gonna take some getting used to. Just driving at this morning I am constantly worried about running over something in the blind spot even though I’ve got pretty good visibility

[@timatkins3125]

Are these cabs good for the "older" models? I have a 2014 2032R and have been wondering about cab options?

[@RockhillfarmYT]

Currently they only make their more premium cab for the older models. Thanks for watching curtisindustries.net/product/john-deere-2025-2032-2320-2520-2720-hard-side-cab/

[@1fastcamaro]

I would like to order a cab like this for my 2009 John Deere 4120 and install it myself, but do NOT want to go through a John Deere Dealership. They are terrible to work with on getting an order going for you and am having trouble getting one shipped to my HOME ADDRESS. We live out in the Country. I have forks for my tractor where I could unload the product. Any advice you have would help in how to pursue this?

[@RockhillfarmYT]

I got mine directly from Curtis Industries. Maybe call them about availability? I don’t know exactly what model say you have available

[@giovannipg3000]

Where can i buy the cabin heater ?

[@hartleyhomesteadmichigan6041]

Great looking cab! New subscriber here

[@RockhillfarmYT]

Thanks, and welcome to the channel

[@charlesmaxey9165]

Only for John deere tractor? Have other tractor cabs? I have a kioti.

[@RockhillfarmYT]

They have them for a few brands but I don’t remember exactly if they have kioti Mike check the Curtis cab website

[@wisoutdoorsman1862]

Do they make a cab for a 3025d? Thanks

[@RockhillfarmYT]

On the website for available models on John Deere it only shows 3E You could check with Cirtis industries though

[@albertclos]

Can you give a measurement from the ground to the top of the cab?

[@RockhillfarmYT]

According to Curtis the Top of the cab is 60 inches above the floorboard Specifically on my tractor the top of the cab is 83 1/2 inches at the highest point

[@danyoder3534]

Curtis is the only add on cab that offers air conditioning

[@danny6905]

Whats price?

[@RockhillfarmYT]

Between $2300-3500 depending on options Thanks for watching

[@carltrano1325]

I agree the Curtis cab is nice but the cost is to expensive, would have made more sense to purchase a cab model to begin with.

[@RockhillfarmYT]

John Deere does not offer a cab for my tractor. When they do offer a cab they normally cost around $10,000. This cab can be had as cheaply as $2500. That’s 25% of the cost. Huge difference.

[@paulmeyers5283]

I have a Curtis cab on my 19 1025R the front windshield gasket leaks keeps coming loose and has since new, doors gaskets leak and come off, bought Curtis Rounds lights they both leak h2o they are both shot now, not even 3 years old I talked to the dealer about this, but I was just outside the 1 year my bad, and now the rear wiper motor died first time plowing snow this year, and the mirrors vibrate and move on you every time you close the door and I did tighten up so they are a joke, did you notice his mirrors had moved, this CAB has been a Nightmare and it was installed by the John Deere dealer when I purchased the tractor new, poor engineering and they do not stand behind it!!! I emailed them about getting an upgraded roof that was not flat I got 1 reply and then nothing and frustrated customer.

[@RockhillfarmYT]

Thanks for sharing I’ve been really happy with mine

[@funtyes1970]

i dont know 90+ degrees temperature would be nice having air conditioning

[@RockhillfarmYT]

Definitely, but those air conditioned factory cabs have a big price tag with them and they rob a bit of little horsepower from the machine This cab is cooler than an open station because you have shade and a fan

[@funtyes1970]

@@RockhillfarmYT lol just saying that is all and you are right about them dealers . and having a cab with heat for the winter would be awesome especially if someone have a snowblower or snowplow on there tractor

[@RockhillfarmYT]

Yeah, I wasn’t disagreeing with you. I want to end up with a cab tractor that has air-conditioning Just mentioning that there are different factors for instance the 2038r doesn’t have a factory cab option

[@bucsanders7861]

Are you filming in 60 fps? The flicker makes the video unwatchable...

[@RockhillfarmYT]

Thanks for your feedback. I have a really nice camera but I just leave it in auto mode. I just re-watched it and I don’t Really notice flickering. If I’m looking for it maybe a little at the beginning of the video

[@RockhillfarmYT]

Are you watching it on your phone?

[@bucsanders7861]

@@RockhillfarmYT No my laptop...

[@bucsanders7861]

@@RockhillfarmYT Are you filming in 60fps?