VIDEO 2 of 3 ARRMA TYPHON GROM GETS MICRO MAMBA X2 COMBO BRUSHLESS CONVERSION

2 of 3 videos, quick vid of showing the brushless setup in each typhon grom
Had to do some modifications to get everything to fit under the bodies..
Blue Typhon setup:
-Castle 1010-5600kv motor with x2 esc
-Hot Racing 16t pinion
-HOT RACING cvd axles F/R
-HOT RACING wheelie bar
-Amazon shocks for 1/18 scale crawler
-Zeee 1500mah 3s battery 50c pack
-6channel spektrum avc receiver
-Traxxas 4tec slick wheels 12mm hex
-Granite grom front bumper
Red Typhon setup:
-Castle 1007-6350kv motor with x2 esc
-Hot Racing 17t pinion
-GPM F/R cvd axles
-GPM F/R hub carriers
-GPM rear differential cover
-Amazon shocks for 1/18 scale crawler
-Losi mini-t 2.0 front bumper
-Contact foam tires 38 shore 26mm wide
-Spektrum 3channel receiver
-Hoova 2200mah 3s 50c battery

[@richardbrown6762]

You build some nice cars i like the on road tires I'm running my hpi on road tires on my typhon grom 🙂👍

[@MrMeDos]

Nice 👍. thanks man

[@GNCRC]

Nice work bro!

[@MrMeDos]

Appreciate it!

[@richardbrown6762]

I want to put led lights on my typhon grom and run at night 😎👍

[@jaymitchrc]

Looking good bro

[@MrMeDos]

Appreciate it bro. Thx for watching.

[@jhawk1985]

Put a Reefs Micro 99 Servo in that little monster ! Sick little build. I might build me one. I have a Mini T 2.0 with a 8000kv TP power mini motor in it and Mamba Micro esc. Its a little rocket.

[@MrMeDos]

I bet.. these esc’s are powerful.. build you one or two.. 💪🏾💪🏾🤣

[@GNCRC]

Nice work!

[@MrMeDos]

Thanks!

[@notsotacdad1067]

Just in case you do another typhon from with the 1007 motor…. Instead of trimming that center brace, I removed the 3 screws holding the motor face on and turned it so that the wires from the motor are on the other side when I screw on the motor mount

[@MrMeDos]

yeah its a couple ways to skin it.. gota live an learn. thx for watching

[@WuDidit412]

Yo Dos them for the streets 👍🏿 Leggo

[@MrMeDos]

Yessir!!

[@nickhathaway4617]

Nice what tires on the granite also on the 6 and 5 thousand kv motors you run 2 or 3s? Thinking of one of those or the 4400kv combo for my 1/12 rlaarlo. Thinking 4400kv cus I got a adjustable motor mount up to 27 tooth pinion

[@MrMeDos]

im running 3s on all of them, 17t in 6350kv and 16t 5600kv. if you get the 4400kv you can run 4s. go with the 4400kv

[@Desauce512]

That’s exactly what I want to do on mine! It looks sick asl! Can you give me more information on what I have to cut in order to make the motor work? TIA :)

[@MrMeDos]

Honestly bro, its a trim to fit situation. Just take your drimmel tool and start to remove the plastic around the motor terminals until your able to close it completely. Depending on the length of your motor can, you will lose the center screw hole, but its okay, you have plenty of support on both ends where the majority of screws lock in. Or other option is to get a universal motor mount and that way, you may not have to shave the center cover. Since that motor mount will allow you to use different set holes on the motor to screw on the plate. therefore you can possibly rotate the motor more so it doesn't interfere with the cover.

[@Desauce512]

@@MrMeDos Thanks for the info!! So I guess a sliding motor mount would be my best bet in this case so I dont have to do much trimming.

[@MrMeDos]

@@Desauce512yessir. I didnt want to wait lol. The drive shaft cover cost the same as a sliding motor mount🤷🏾‍♂️ sooo… yeahh i chopped’em. Lol.

[@srk7268]

Awesome video. I have a 1007-6350 for my Typhon Grom with an 18T pinion. What motor mount did you use? I bought a GPM mount but can't get more than one screw to line up with the Castle motor....

[@MrMeDos]

I bought the motor mount pack and im running a 16T in mine with that motor. With the 5650kv motor im running a 17T pinion and my granite grom im running the 0808 -5300kv with a 18t pinion with factory mount. I bought the gpm mounts but didnt need them.

[@srk7268]

@@MrMeDos and you're able to line up two screws with a castle without having to mod the chassis? I'm not sure what I'm getting wrong!

[@Bobwa2008]

Question I got my Typhon Grom last week I don’t like the transmitter at all to small for my big hands will any brand 2.4 GHZ transmitter work with the stock spectrum receiver ? Thanks

[@MrMeDos]

Im unsure bro, never thought about keeping the stock electronics long enough to find out lol.

[@Bobwa2008]

@@MrMeDos thanks

[@christophergarcia8403]

You can get an SLT3. It's the standard transmitter size instead of the smaller sized SLT2

[@KnockOut457]

How did you get wheelie bar on

[@MrMeDos]

The four bolts at the bottom. Bolts right up. Hot racing wheelie bar. Fits granite and typhon grom

[@Matronicrc]

I put a kraton 6s bumper on my typhon 6s

[@MrMeDos]

Nice, hows that working for you?

[@Matronicrc]

@@MrMeDos great tbh

[@damaylaphoenix1155]

which typhon is the fastest?

[@MrMeDos]

To be honest bro, i havent been able to tell. Im still at 75% throttle and still cant pin the throttle down. The blue i got upto 47mph so far and that was maybe half throttle before it starts to veer to the right. Still working on throttle control and keeping them straight. Making something go fast that wasn’t designed to go fast is the tricky part.

[@damaylaphoenix1155]

@@MrMeDos try the spektrum avc receiver

[@MrMeDos]

I have it in 2 of them, one in the granite and one in the blue typhon. it helps the granite out a lot. the blue one you can tell as well. AVC definitely helps, now it just moves the issue to the next weakest point, the steering link flexing because its plastic. So its a work in progress.. We will get there eventually. If I can hit 70mph im happy. that my goal. thanks for watching.

[@AaronsRCs2]

My typhon grom is the fastest lol. Facts

[@MrMeDos]

🤣 man i hope so too.. enjoy it bro.. fun little cars to work on.. stay blessed… 🫡