Roosa Master DBG Injection Pump

Disassembly of a Roosa Master DBG injection pump for my IH D282 powered Galion crane

[@henrymichaelwilson8107]

It's so nice to have a little dog.

[@henrymichaelwilson8107]

Hello Jeff. We have a guy that repairs diesel pumps of any sort. He is magic. We don't know how he does it. There's only him and his son and he's magga busy.

[@noshsreqd]

Harbor Freight has a nice ultrasonic cleaner with a built in heater that might be good for cleaning stuff like that. I'm planning on buying one to try it out. Back in the day when GM came out with the 5.7 olds diesel they had Roosa Master pumps and those flexible drive rings were always the first thing to fail. Usually around 25,000 miles, that and all the other issues they had left a lot of people with ill feelings over owning a diesel powered vehicle. My dad and I changed a lot of injection pumps at our shop back in the 80's. I still have his '79 Tornado diesel which I drive every summer.

[@scrotiemcboogerballs1981]

I’d have thrown it against the floor and opened my wallet for a replacement lol you are better then me buddy hope you get it back together and can get those parts fairly quickly and cheap thanks for sharing have a great thanksgiving

[@richardlincoln8438]

Thanks for the roosa tutorial Jeff. Wishing a Happy Thanksgiving to everyone at Anderson Construction.

[@corythomas4427]

10+ years ago I bought a toaster oven for those situations where you've gotta heat something that the Mrs. doesn't want in the household oven.

[@douglasmayherjr.5733]

Another Great Video, Jeff. I have a forklift that needs the pump rebuilt as well. Hopefully you and your family had a Happy Thanksgiving.

[@robdixon945]

Thanks for the show Jeff 🍻 🇦🇺

[@richardhoneywell7411]

Great video Jeff thanks for sharing your Roosa Master pump teardown and cleaning. Looking forward to your next video stay safe Jeff.

[@matkremzar5474]

Roosa started here in ct .. good job jeff

[@Blazefork]

I've used a BBQ grill for a bearing oven occasionally...... works great. The old school berrymans does a great job, the new stuff is pretty much garbage. You'd have never gotten out of a pump shop for $1400, you saved yourself some nickels.

[@michaelbrown6241]

Hytrack final drive hubs dont have a problem with loose segments, the problem they have is people who do not have a clue how to salvage the hub segment flange coectly, when new or reclamed corectly the segment bolts will never be loaded in shear. If the segment flange bolt holes are worn that is a symptom of another fault. The bolt hole sleeves you reference are for the original D10 84W hub which is the only hub that has a tight fit between the bolt shank and the segment flange hole. Weding any hytrack final drive hub is also a no go, if the flange is cracked or to thin it is scrap.👍

[@Jpaydirt]

it seems I'm always seeing high drives with issues, when you put all the torque on a few bolts your bound to have some issues

[@jefftheaussie2225]

Jeff, It looks like there has been some water find its way into that pump. That is why the plungers were stuck. There may have been a comment about this already. Pumps don’t like water, the tolerances are so close that a very small amount of moisture causes them to jam up. Just touching the plungers before they go in will be enough to do it. A very good TAFE (Technical And Further Education) teacher taught us that but I have never had one apart, you are fearless when it comes to stuff like this. Jeff

[@Jpaydirt]

Fearless and without any sense LOL

[@CRUZER1800]

Another very interesting video, Jeff.. I like seeing inside of gadgets to see what makes them tick. Brian Block is quite an interesting man... an incredible source of knowledge on all things mechanical. Have been watching him for many years... since the "barn shop" days. The array of Monster lathes and milling machines he has is impressive. Looking forward to seeing you put it all back together. Wishing you and Mrs. Paydirt all the best.... Russ

[@robertmichel4924]

Thanks for your time.

[@michaelweatherhead9470]

Well done Jeffrey 👍👏❤❤❤ awesome job 👍. You win great work. Take care of yourself and family and Griffery and be Blessed ❤️.

[@granterickson9294]

Jpaydirt, the new and improved Julia child! 😂

[@dennisholst4322]

Without a stiff neck

[@glenngosline1710]

You are a great wrench

[@billyhorton5779]

Be sure and blow out the return line to the tank as those tiny broken pieces will restrict or stop the return flow of fuel to the tank. The return line comes out of the cover on the top of pump housing. There should be a spring loaded glass check ball in the fitting that screws into the top housing, make sure it is installed and no debris is blocking it.

[@colinkennedy8730]

Good video Jeff

[@kenuber4014]

I've seen Frank tear a fuel pump down once. He was able to make it work. So if you need help I'm sure he can give you a hand!! Lol

[@Digginok]

I have done some dbs, never had one this stuck. Jeff is fully justified! 😂

[@kenuber4014]

@@Digginok Aw Frank...We could have had some fun with that pony!! Lol

[@Digginok]

@@kenuber4014don’t kick a man when he is down, he’ll that’s two tanks of fuel and the cost of Texas Roadhouse to boot? This man is hurting 😂

[@kenuber4014]

@@Digginok OK!

[@Jpaydirt]

Go ahead Frank , Kick me....kick me hard LOL

[@michaelmcclure8673]

Mr Paydirt, that's one fancy paper weight right there. 😊

[@mfc4591]

Mr Griffy been hiding his bones in the injector pump housing😂

[@bugeyedwillypetfarm9625]

Solid drive plate

[@johnfry9010]

I got bills to pay , I got mouths to feed , and there ain't nothin in this world for free !

[@shisholy7828]

Might want to give that nice looking Weber a good 500* cook off with nothing in it so you don’t get residual contamination of some sort. I want to see you making more videos for along time to come.😜

[@shopdave7489]

I thought I was the only one who spent money like that on repairs. 🙄 Stuff happens. Nice calendar. 😁

[@JD-zm4eh]

Amazing to see the guts a device that makes a system function. Don't you have to pull it out while it's hot or would that be rude. They used space age glue. Your calendar is a modern socially adjusted date stamp, looks hilarious. I miss the good old calendars us real men owned. Keep warm and dry Jeff.

[@ohhpaul7364]

I got nothing to help you on this one, Jeff, but I did enjoy the video. Happy Thanksgiving.

[@Jpaydirt]

A bottle of the good stuff may have made me feel better and possibly loosened the valve LOL

[@sharonfieber6458]

Tech school instructor said is very fine wire in water drain hole, water grabs on, drains off water. Water drop will not go through the whole.

[@curtisharlan9230]

Good morning Jeff

[@KG-yn9qi]

Hey Jeff. Think should of just sent it to them they have a machine to test run it and set it for proper delivery!!! Be clocked timed etc! They paint and everything. Just bolt on and go !

[@Jpaydirt]

That's to simple, plus there's no video

[@KG-yn9qi]

@@Jpaydirt Yep Better With “ Jeff Wins” Boom! 😂😂😂.

[@timothyreed6054]

Mrs.Paydirt "Jeff my steak tastes funny."

[@mfreund15448]

I like Cookie’s BBQ with my Rosa Master pumps!

[@billmoran3812]

I made up my mind years ago it just wasn’t worth it to mess with injection pumps. I just take them off, and either get it rebuilt or swap it for a reman. If it’s an engine that has sat for many years or had water in the fuel, I do the same with the injectors.

[@craigadavies7963]

G'day Jeff, Allen Millyard a British motorcycle genius uses the BBQ with great success, to release all his tolerance and glue fittings. 24 hr epoxy is great for holding fittings ,but it's also possible to use varnish to glue surfaces, just as they do to hold ships propellers on. Just check that adhesive compounds aren't devolved by solvents before using in hydrocarbon situation s/applications. Respect...!

[@Jpaydirt]

Using JB weld for metal, says its no affected by petro products and has a heat rating to 550 F

[@craigadavies7963]

@Jpaydirt Hi Jeff. JB WELD. Is a great product,I've used it in many repairs including hydrocarbon/fuel repairs . Mainly used it for its overall strength. As for heat ,I've found a few other products that are recommended for higher temps than JB WELD ,particularly for use in manifolds, blocks and head repairs . For the fuel pump situation ,JB will offer an almost permanent repair . Jeff wins again ..! Respect

[@mischef18]

Have you a good side salad to go with BBQ injection pump bro. Great video by the way. Safe travels. Ken.

[@corywillbanks6348]

Since it’s already broken I’d be curious to see what the delivery valve really looks like. I’ve rebuilt a few of these, the first one is a bit scary but they’re really not bad to do. Hopefully whoever you’re dealing with can provide your roller dimensions for setting your fuel rate since you have to change the head.

[@Jpaydirt]

I can't get it out I've tried everything, and I even ruined it so it doesn't matter anymore, my book tells me the roller to roller dimension and since it's in a crane I'm not worried about overfueling it

[@doublediamondgarage3031]

Doesn't matter what it costs, that machine is worth fixing. You'll get lots of use out of that crane

[@russellsmith3825]

Those governor drive bands were made from polyurethane, the update is a welded steel cage, if the drive band breaks, the engine will not run faster than an idle.

[@_Ben4810]

Ken at Boise West Equipment still has that nice Cat telehandler for sale...!?! 😁

[@VinniePepperoni]

Man sorry to see that issue Jeff, maybe cut that thing in half with a band saw or chop saw to take a look see better so you can feel a little more better on that money drop. After all your work I’d rig a water separator on that great job after you get her running

[@Jpaydirt]

water separator is on it, but you have to clean it occasionally LOL

[@matkremzar5474]

Looks like a race pump now . They say you learn the best when your paying ... but I'm not so sure (I'm in for tens of thousands) . Happy holidays Anderson construction!

[@kimmolnar8841]

I Use A Old Toaster Oven Nancy Hasnt Missed It Yet

[@jasonmorris2813]

No doubt in u at all

[@waynetharp]

Have a Happy Thanksgiving, Jpaydirt n Family! Please don't cook the turkey at 550°!🦃🦃

[@phillipbonner5215]

Yep

[@billbooth4147]

Looks like new money

[@andyfields3248]

I didn't know you had the problem till too late but . . . If you could pump grease into that with a grease gun it'd come out. If you couldn't plumb it you could have sent it to me, I'd have machined an adapter. I owe you one anyway.

[@Jpaydirt]

well i put 200 psi to it, if it's that stuck the bore is probably dickerd also

[@andyfields3248]

@Jpaydirt Yes probably not a good bore anymore but I'd have got the stubborn sucker out.

[@d6c10k4]

Local injection pump expert used to clean housings with fine glass beads.

[@jimcrowl6925]

Great job on the clean up. What's the inside of the fuel tank look like?

[@Jpaydirt]

dark..........black to be more accurate, in the last crane video we drained the tank

[@jefftheaussie2225]

Black as the inside of a cow?

[@rossnolan2883]

😊😊😊😊

[@user-tn1hk6zm2f]

A link to the website where you get the parts would be nice.

[@chrischeney4384]

If you don't hear from area, signature fuel in Billings sent me a kit, bushing and everything in 2 days to rexburg.

[@Jpaydirt]

guess I should of asked about fuel shops before I made this video, thanks for the heads up on signature

[@chrischeney4384]

@@Jpaydirt Jeff wins in the end!

[@DavidCinelli7815]

Griffeys ready for barbecued pump housing lol.

[@culturaldivide6817]

Was an outfit in New York called Jobbers Inc that deals with pumps and rotary pumps I have delt with before have a website

[@matkremzar5474]

... wow Jeff these steaks are great ! What's your secret?!

[@tonymidkiff2108]

Jeff will win in the end

[@bombardier3qtrlbpsi]

My ultrasonic cleaner.... DIY pot your wife doesn't use or don't tell her.😅 Pow-R-Clean + Dawn Dish soap in the pot on my wood stove heat it up. Or what ever cleaner you want to use.

[@12Georgia83]

🍺

[@robertquast9684]

At least you know it will be right.

[@buttheadsmith7012]

Have you tried Kroil to break loose the frozen parts?

[@Jpaydirt]

I'd try whisky if'n I had it

[@petepeeff5807]

I looked at the videos didn't see any other crane videos.I'm betting that is IH d282 . If so you are a CAT guy and are going to be very frustrated with it. Couple tips if you don't know. Glow Plugs,Glow Plugs,Glow Plugs they have to work or it won't start. Crank the engine holding the Glow plug button and keep holding it till the engine runs smooth and the injectors clean up. Those Injectors have a very low cracking pressure and don't atomize very well.Keep the starting fluid in the truck and away from it. I know it's tempting but dont. Most D282 died decades ago from the juice. Hope it helps someone you probably already know this.

[@Jpaydirt]

kzbin.info/www/bejne/n3emmp6Zbqp4ldk

[@jaymehann5820]

there is a tool to get the deliver valve out. it’s very very common

[@Jpaydirt]

can't imagine what it is, 200 psi wouldn't spit it out

[@jaymehann5820]

delivery valve remover. use it every day

[@gullreefclub]

Get a cheap toaster oven to cook the housing in

[@clydeacor1911]

All you had to do was drive Kenny to Rigby and grab my Grove RT 25 ton crane. 😉

[@Jpaydirt]

I may still need to Clyde

[@Digginok]

Carb cleaner before the bbq Jeffery 🤦‍♂️read the cookbook

[@stevewesley8187]

Yeah , but think of all the fun you've had .............

[@cew995]

Snyder’s in Paul Idaho rebuilds those and has parts. They have a pump stand to calibrate them also. Talk to Randy Snyder.

[@cew995]

What did you use to get the cam ring stud out? That is where I usually ruin the stud and turn it into junk.

[@Jpaydirt]

@@cew995 just a allen wrench, now you tell me about snyders............balls

[@hanshaw1974]

Cheaper to send to the pros, and do a video deal.

[@bombardier3qtrlbpsi]

And I unseized a lot of things in boiling water

[@dennisholst4322]

Who likes itty bitty now

[@dennisholst4322]

Mello Yello

[@Jpaydirt]

pee on it?

[@brycegisselbeck6548]

Bore the bushing out

[@larrytomb3896]

Use a cheap toaster oven

[@carl4043]

Pumps all over eBay for $200 - 800. Rebuilding service for $400-500. $1400 in parts and untold hours...Jeff wins? 🙄

[@Jpaydirt]

Can't rebuild one if the delivery valve is stuck in the rotor, still going to have to replace the rotor and head, you can't just buy any 200 dollar pump and slap it on