rough country 5.5" lift block review for F150

[@nickwalsh5042]

I have the same thing but is you’re rear end lower than you’re front still mine is the front is 2 inches higher

[@MR1GATO3YT]

Thank you for making a video I almost purchased the wrong blocks . Thanks again ..

[@arm2storm]

What tire & wheel setup? Looks sharp!

[@Aespos295]

Stumbled upon your videos a few months ago and decided to try it! Did/do you have any issues? I just did the exact same conversion, but now my truck is vibrating and makes a weird noise when I'm accelerating around 35mph. And if I hit a decent bumb theres a clanging noise from the back. Can not figure it out for the life of me and its driving me insane!

[@chevsuz12]

I have not had any problems at all. Have you checked the torque on the bolts since they were originally installed? Perhaps something is loose?

[@Aespos295]

@@chevsuz12 I have an appointment set for Monday to check! Did you have to do anything to your driveshaft?

[@chevsuz12]

@@Aespos295 yes, when I installed my six inch lift kit, i installed the driveshaft spacer that was supplied with the lift.

[@Aespos295]

@@chevsuz12 that's where I messed up! I dont know if the 4 inch lift came with one or not. I had the kit professionally installed, and the RC page doesnt say anything about spacers on the "in the box" tab. I'll have to look in to that ASAP. Thank you so much for taking the time to reply!

[@chevsuz12]

@@Aespos295 You should have one. I actually installed the 4" RC kit then converted to 6". the 4" did come with the spacer. just look at you driveshaft and you should see the aluminum spacer installed.

[@Skiid.row.]

Dude where can i get these?? Ive been going crazy looking for them. Cant find em anywhere.

[@chevsuz12]

you will need to call Rough Country to purchase this part.

[@MR1GATO3YT]

Do you have the link to where you found those at ?

[@chevsuz12]

You will need to call Rough Country to order these.

[@MR1GATO3YT]

Did you have to change the rear shocks ?

[@chevsuz12]

the shocks were replaced when installing the 4" lift. They still work fine after replacing the rear block.

[@MR1GATO3YT]

Chevsuz 12 ok thanks