Rough Country Black Series LED LIGHT BARS: '19 - '21 Silverado

[@tuglife4354]

Thank you for actually showing what it looks like at night so many reviews don’t

[@gilbertmarquez7819]

Bought some lights after I saw your video and installed them by myself just by watching your video, without reading any of instructions 😉 THANK YOU!!!!

[@yeahok115sure]

I have these and they are badass. Looks really good. Wired mine into the fog lights.

[@jeffbuffenmyer5641]

I’ve had mine installed on my ‘20 Trail Boss for about 4 months now, love the look. I used a remote controlled relay switch wired to power under the hood, took the remote and programmed the garage door opener switches to run the lights, no reason to try to run wires into the cab.

[@LonestarHawaiian]

I love that idea. This is the second comment telling me to use a remote switch... how in the world did I not think of that? Mahalo!

[@jeffbuffenmyer5641]

Here’s the switch that I used, it came with a relay but I used the one with the light kit. Nice thing is that the connectors matched the ones with the kit relay so no ugly butt connectors and tape to be seen. I just put the remote in the console just in case I would ever need to reprogram the garage door opener. www.amazon.com/gp/product/B01DOUV83K/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

[@arturorios7741]

How did you program the wireless remote to the garage opener button? i love the idea.

[@jeffbuffenmyer5641]

@@arturorios7741 just follow the instructions in the owners manual for programming a garage door opener

[@218KB]

​@@LonestarHawaiianhow'd you get the led in the switch to turn off?

[@krakadile]

This is one of the best videos I have ever seen. Outstanding job. Thank you so much for such an incredible video. 👍

[@jimmylittle4448]

This a great video...love how you showed the ups and downs about this process. I will definitely be doing this to my Silverado very soon. Thanks for doing this...look forward to your upcoming videos.

[@victorlong6979]

I purchased the wireless key fob and you can turn on lights with no switch. It works great. You attach the controller where the switch wire connects. Awesome.

[@victorlong6979]

I purchased here...www.amazon.com/gp/aw/d/B01M1FBSIL?psc=1&ref=ppx_pop_mob_b_asin_title. Rough Country also sells one. Wherever you can find it in stock.

[@tiimmyturner5301]

My lights only come on half way on both leds… I’ve got it connected to the wireless remote but not working fully

[@RyanBernard10]

Just picked up the GM upfitter aux switch kit. Gives a full harness and 5 switches along with a stock GM kicker panel that it mounts into below the steering wheel. Super clean and looks stock. Not bad for $250. Just ordered this kit and gonna use it for my ditch lights as well for the boss.

[@silverman001]

Just installed a lightbar on my 21 silverado . Was stumped on how to run the wire for the on/off , followed your video ... success

[@carlosfigueroa7616]

I had my first attempt to remove the grill today but I got really frustrated and I got scared that it was going to break from pulling too hard. But after seeing this I'll give it another try tomorrow, hopefully I'll make it work. Great video 👍

[@BERTO929]

Were you able to take it out without breaking anything?

[@carlosfigueroa7616]

Yes I did. Just need a quick pull, I mounted the lights and everything but yeah pulling that out was definitely the hardest part.

[@BERTO929]

@@carlosfigueroa7616 how long did the entire process take?

[@DetroitMikeVids]

Came across your site yesterday and you’re already one of my favorite auto KZbinrs! Great job!

[@LonestarHawaiian]

I appreciate it! Welcome 🤙🏽

[@coleheanu423]

Yessah my Bradah buggah is cherreh love the build Hawaiian keep it up

[@alexwright8072]

Love the way the integrate into the grill.

[@madmaxtv7224]

You should look at painting your calipers red, easy project and more content for the page! 👍👍👍

[@_riverlyfe_177]

Looks great. Had these in my cart for awhile. I think I may have to do it now. Thanks for the diy

[@cloudstriker3972]

OmG Trail boss upgrades! PLEASE KEEP THEM COMIN!!!

[@LonestarHawaiian]

Oh there is more coming! Thanks for the support!!

[@scumbub]

@@LonestarHawaiian Readylift SST +2🤙

[@repirts28]

Love mine. I had them on my F250, but now I literally just purchased the same midnight edition Silverado and want to install these same ones

[@LonestarHawaiian]

Right on!

[@craig4926]

FYI that light that stays on on the switch will never kill or drain the battery. i had one of the same and painted over the light and it was in my truck for 2 years with no issue. i agree they suck but worked just fine.

[@jasonfawson2559]

The I dont destroy my stuff and Mike's clip added in had me laughing , perfect and great vid.

[@ernestonevarez1276]

The truck just keeps looking meaner and meaner. It looks like it could be factory lights. Awesome video

[@samsidwilliams190]

I installed the same ones on my pickup! I measured liked 10 times to cut once and still took my time cutting it. They are amazing lights bro! You made a great choice! I cut that ugly push button to a blue toggle witch, which I mounted to the big square empty slots below the radio, lights up blue like the lights when lights on and double lights when I toggle the switch. Great addition man!💪🏻🤘🏻

[@paulhewitt2473]

Do you have a link for this switch?

[@DeltaDxE]

Love mine. They are stupid bright for the size they are. Glad to see you picked them up!

[@peppadsniper9920]

Just installed these and the wide spotlights from RC. I have not been able to test in total darkness or in a decent dark location due to being in a city. I'm taking my boys camping this weekend and cannot wait to see what they really look like. Either way, I am happy with how they look on the truck now. Adds a good look to an already sexy truck.

[@adrathemetaloutlaw754]

cool upgrade... have to admit, the best part.....the kiddo with the shades

[@LonestarHawaiian]

Right?!

[@dennisramirez3339]

Black Tie is definitely the way to go as far as names go

[@da9gsr91]

You need to find a switched 12v source, not a 12v constant, that way the light with only be on when the truck is on, all you done is kept power to the switch and removed the switch led ground, so it doesn’t light up red or green, still drains on the battery

[@Redfishdaddy]

I pulled my grill for the first time and it scared the ....... out of me, only broke one white clip. I need to buy some but have not looked for them. Cool install.

[@ScaleModelBuilder]

I would personally leave that little light on the switch. It looks like you tapped into a fuse, what you could do, so that light isn’t always on, is tap into a different fuse that only has power when the vehicle is on. Then you won’t have any battery draw, and you won’t be able to accidentally forget that you have your lights on and kill your battery.

[@bigkat776]

That's what I was thinking also, but I figured he must have thought about that already, with doing mods like this. 🤷‍♂️

[@luiscastillocampos5583]

How can I tap into a fuse I just wired up my led light bar and fog lamps that came with a rough country bumper but I have the red light on for the switches, definitely don’t wanna drain my battery

[@ericmelnyk4889]

Ive been running that switch 2 years no problem, even in extreme canadian winters and even after leaving car off for days… i doubt that light draws enough to hurt battery

[@akaKyubii]

Just found you today since im looking at buying one started with the classaction lawsuit video now im watching the whooe playlist on the trailboss love your videos so far!!!

[@TalalAlHarmi8778]

I was so excited for these led’s when I first saw on ebay, then I saw your video and got more excited from your review specially when you said for aaages, I replied that section many times to see the difference when you switch them on but it was just few seconds so couldn’t tell and made my decision based on your words, so I ordered them and got them installed (without breaking the clips on the grill)😂, but when I first turned them on I got disappointed😔 It’s not what I thought or hoped, but in all they are good, the beam is almost circle ⭕️ , its very sideway and wide up to the sky, & because I was expecting so I bought the RC hood spot led’s too, and that’s made the smile on my face😁, its a good combination, but these alone wasn’t satisfying, was planning to get the adapter for the side mirrors but these works instead, Don’t make me excited then break my heart 💔😂, remember I’m watching you👀 All the best bro…✌🏼😎

[@larrydeaton5452]

Lights look great. Midnight Rider for the Camaro!

[@wcarson0513]

You should look into the GM auxiliary switch panel that goes next to the park switch.

[@PureGarage]

Second this!

[@Hypedhitman]

Great video. Nice to see you get frustrated for once. You make everything look so easy !

[@christophershall84]

You will always be the bell of the ball with a BLACK TIE that is suitable for all events...

[@UntameableVeteran]

Notorious Z!!! That is fire!!

[@unixdoes]

oh man i FELT those "oh sh*t" moments...great vids keep 'em coming!

[@RedPeakFilm]

Just got mine installed. Looks great

[@wcsoblake85]

The title of the video starts at 4:12

[@sedoshi]

Man, I just removed my grill about 3 weeks back on 2021 Trail Boss, they are such a pain to remove. I was just about as frustrated as you were at first portion of the removal.

[@mikq8606]

So did you tap into the toggle switches under radio? I’m think of doing that but have no idea how to.

[@jasonworkman7912]

Question. Would these be able to get hooked up to an auxbeam 8 gang switch panel and be able to be turned on and off by that? Instead of using that little flimsy switch that comes with them

[@mikq8606]

We’re you able to tap into the stock switch panel? What button did you use for the fog lights?

[@eddietrujillo224]

Rc has the best light bars for the money and you cant beat the quality I've order 6 from them so far I do hate there switches thou I'll give you that the 52inch has a small oval one I like that super easy to hide

[@michaelisun]

Hi I was wondering how did you end up hooking up the power so the light in the cab wasn’t always on

[@brianstandley2394]

If you were going to add Rough Country ditch lights with the led grill kit would you use the black series spot/drl or the spectrum series pods?

[@paulhewitt2473]

Which wire did you cut from the switch to get ride of the green/red light and constant power?

[@busaman1444]

I put my exterior LED bars on a 4 port remote switch mounted next to the battery and obviously the remote inside with me, no ugly switches or running anything through the firewall. You should check out the Pulsar LT module that just came out for this generation GM truck, auto start-stop disable, DFM disable, governor disable, etc. By far the best thing I've done to my 2020 Sierra Elevation so far.

[@jarednifong5615]

hi, can you post a link to the 4 port remote switch?

[@erikmontoya2831]

FINALLY!!!! I have been looking for a review on these!!!

[@brandonthompson2311]

Boost Auto Parts sells a wire tap for a 6 high mod. Have it on my 2007.5 GMC Sierra 2500HD. Fog lights stay on when high beams come on. Side note: if fog lights and high beams are off with this mod, by only turning high beams on, fog lights will also turn on as well.

[@LonestarHawaiian]

I appreciate it! I'll take a look at the part!. This thing looks crazy.

[@alldey23]

Wish this fit my 2008 chevy silverado :] had to speed comment before I watch the video. Know its a banger!!

[@LonestarHawaiian]

I think you can retro-fit it with the separate brackets/hardware that is included. I don't believe the RC plates will work on the 08 grille

[@jacoobias]

I think Black-Tie would be the best name for the ZL1 as it is classy 😎 yet menacing. Love the vids, keep'm coming!

[@Butlerfishing707]

I know I am late to the naming of the Camaro. But just for fun God “Z” lla. Great videos and information. I am currently waiting on my first ever new car to be delivered and I chose a Trail Boss. After watching several of your videos I can’t wait for it to get here at the end of September.

[@LonestarHawaiian]

Right on! Congrats and great choice. Stoked for you 🤙🏽

[@jacobd8613]

How did you get your high spot to be tied into your high beams?! I need to know this!

[@Review-This]

I want to do the same on mine

[@rgman2858]

Rock auto makes a relay to have them on

[@aaronmartinez8531]

I want to get this for my TB but i dont understand how to connect it to the battery . (never hooked anything electrical up to the battery before)

[@carlos-uq1fb]

Good stuff bro !!

[@codypaterson9139]

Looks good! I can’t seem to find it in me to cut my RST. Knowing me I’ll f*** something up🤣

[@andreweich6906]

So how did you solve the constant power draw to the switch?

[@jafetalvarez1189]

How did you resolve the ON/OFF switch light staying ON on the OFF position ? does it. I'm in the process of installing the RC light bar.

[@alphaprojectracing9634]

I'm not sure if I missed it or not, but how did you get the light on the switch to not stay on all the time?

[@edtrumble7336]

I would like more info on the center consul switch bar. I have a SRT if you look on the steering wheel cruse control it has a dead area if you Change that cluster out you can get an active switch there. That is where I would like to wire my fog lights to but Chevy was no help when I asked them that question.

[@MrAngel7393]

Looks amazing!!

[@LonestarHawaiian]

Thanks for watching!

[@MrAngel7393]

@@LonestarHawaiian Thanks for making the videos. Lol

[@scottpowell190]

Pitch Black,what about the black stone " Onyx"

[@allendaleguitars.stpetersb4528]

Jack of Enthused already use that in his video of his one black truck. Onyx.

[@Capsaholic1]

Love that garage

[@LonestarHawaiian]

I appreciate it! Lots of work, but completely worth it.

[@TxGursk]

Do you have different LED headlights? I’m not a fan of the LED lights that my 2021 has.

[@JaredFMansfield]

You could name the Camaro "Cash" as in Johnny Cash, AKA the man in black.

[@mjareacts2731]

LONESTAR HAWAIIAN that's ironic, because we call our 2020 LT Trail Boss Big Z. And ours also has the midnight package. But the biggest difference on our Trail Boss is that it has the 6.2L, and the tailpipe tips are powder coated black.

[@Father_of_Tech]

My companies are all named Black Tie... The name just pops for people. And it looks like the car is dressed for a formal with the black bow tie. Go for it!

[@LonestarHawaiian]

Right on!

[@Father_of_Tech]

@@LonestarHawaiian and I just bought the same truck, 2021 Trail Boss Black. Love it. Doing some of the same mods on mine and following your videos religiously.

[@jacobweishaar4692]

How did you wire them to where it doesn’t have the light on the switch?

[@master451000]

How did you turn off the red light on the switch?

[@SG-bb8pq]

The night marcher would go sick with the channel.

[@Father_of_Tech]

Did you ever replace or upgrade the switch for this? I see those High Country Switch Panels are only $15-20 but was not sure of the complexity

[@HockeyRef14]

You are in Texas - Need to add Emergency Horns on it! I added (2) 2' Union Pacific's under the frame of truck and installed the tank and compressor in the back of the bed under my Retrax MX rolling compartment. Always fun to scare the sh!t out of people. also - no Putco 60" led light bar on the tailgate?! Appreciate some of the cool ideas you have given me thus far!

[@angelowalters6442]

Hi did u turn the light off that's on the switch

[@tobyley85]

Looks really cool! 👍 Black Tie is the one... 😎 And change this oldschool looking turnsignal bulbs to led. Just sayin 😉

[@etorrespt]

Million dollar question I can’t seem to find anywhere…. Does anyone know which wire to tap into to use the 1500 dim switch for an aux switch panel?

[@haydenlynch6965]

How did you end up making your switch light turn off?

[@PeachStateATV]

How come rough country says it won’t fit my 2020 trail boss lt

[@Necromaniac24]

My 07 sliverado lifter 8 went before I decided to work on fixing all the problems so I decided on a new 21 Silverado wt and slowly do upgrades on that instead and I just got new tires for the 07 now it’s rusting over the summer⚠️🤨

[@Leatherkid01]

Youre better that streetspeed.... 👍🏼 200% to me 🤙🏼

[@LonestarHawaiian]

Just different content 👌🏽. He does some great stuff on his channel

[@nicktundo5854]

I was just wondering if anyone knew where you could buy a LTZ or high Country auxiliary panel switches from

[@LonestarHawaiian]

404 Parts sells a kit. Search "Upfitter Switch Kit." there are. few options out there.

[@nicktundo5854]

Thanks man!! I’ve learned so much from your videos. Just ordered me the lasfit led combo package

[@jessemckay7224]

Where did you tap the power from for the lights? I have a similar harness and don’t want the power constant, want to have it tapped of of something that is only hot when the truck is running.

[@paramotorshane7491]

Just wanted to reach out and tell you thanks for all the awesome content. New subscriber here, and your videos have inspired me to go after my dream truck. I have a few questions for you. Do you still enjoy your truck? Do you still have your trail boss? Are there any regrets or major issues you’ve come across? I’m currently looking at a 2020 Lt trail boss as well and with all the awesome mods you’ve done… Well let’s just say I’m excited to see what the future holds. If you get time I’d highly enjoy your feedback. Keep up the great work! 🤙

[@alpha2047]

Did your harness come with a relay? Mine didn't

[@matthewedwards9818]

Awesome!! Been wanting to get these lights for my trail boss so now I guess it’s time!! Also for the auto stop check out Autostop Eliminator. It’s a plug and play that plugs up behind the switch and keeps the switch off but still allows you to turn it back on when you want it. 🤙

[@LonestarHawaiian]

I appreciate it! How difficult was it to get the that panel off?

[@matthewedwards9818]

@@LonestarHawaiian wasn’t terribly difficult. It was more nerve racking more than anything because of the thin plastic and metal clips. Truck Ownership: 101 has a good install video that helped a lot. Those nylon pry bars and tape help a lot though.

[@damianiverson3139]

Big Z! It has sentiment. You and your kid named it. BIG Z BIG Z BIG Z!!!!

[@Jagman2919]

All you need now is the illuminated bow tie in the front grille

[@LonestarHawaiian]

Love the idea (except the thought of removing the grille again lol)

[@andysanchez5457]

Were you ever able to get the switch for the light bar into your row of buttons

[@andysanchez5457]

Switch panel I mean

[@richardjohnson796]

Lone star, I have that red light constantly on also. What did you do to rid yourself of it? Will it drain my battery if I just leave it until I get a new switch set for my Silverado?

[@davidbradley2118]

LOVE YOUR CONTENT!

[@SubpowerProductions]

Are the side high mount lights oem?

[@string_flinger8563]

I would name the Camaro “Zorro”

[@adamjrburr]

Hey ma man, love the videos. I have a 2019 RST and wanted full LED. Was able to change out the plate and reverse lights without issue but can’t find the front signals. Any advice?

[@slikray]

How do you get your high spot lights to work while driving ?

[@ChuckC3]

Do they make these for 2017 Sierra slt?

[@morgancase476]

Maybe you already covered this but how did you get the high spot lights on the side mirrors to stay on while your driving

[@jaychandler8357]

FantaZ as in Phantom Z or Fantasy Z. I had Fanta-Z made out of wood like 2x6 for my White 1980 Hugger Z-28 in the 80’s and would always get comments on it hanging from the mirror 👍

[@LonestarHawaiian]

😂😂😂 I love "Fantaz" That's just epic.

[@jofritz]

So what did you end up doing about the always on red LED switch?

[@xpex3277]

If you don’t unplug the wire will it make the battery die faster or ?

[@LonestarHawaiian]

I doubt the little light would draw enough power to drain the battery. I just didn’t want the light to stay on when I wasn’t in the truck 👍🏽

[@2LOOKER]

Nice DIY project Bro. keep up the good work!!!

[@garlandgilliam1218]

Awesome add on