How to install RPM SxS Can-Am X3 Catch Can

▼▼Buy it direct from RPM SxS HERE! ▼▼
rpmsxs.com/col...
The RPM SxS Catch Can is all aluminum, anodized, and fully chambered oil catch can built to provide the absolute best performance! Designed to mount directly to the chassis and use the factory ¾” crankcase breather hose to allow for a simple and quick install! A pre filter is included to keep dust and debris free from the crankcase breather filter as well. The use of our 12-AN fitting makes installation clean, and allows for easy removal for maintenance later on. Our o-ring sealed drain valve makes emptying the catch can easy and leak free during operation.
Time Stamps:
Tools Needed: 1:13
Catch Can overview: 1:30
Install: 2:25
Mounting the catch can: 6:20
Catch Can operation: 7:16
Check out our website! : rpmsxs.com
Check out our Instagram! : / rpm_powersports
Don't forget to hit that like and subscribe button. New videos every week.
#RPMSxS #CanAmX3 #CanAm

[@STOKED2SHRED2]

As always, amazing quality products coming from RPM! Definitely picking up one of these for my ProXP to add to arsenal of awesome race proven RPM products that are already on the car now. Thanks Jason and the team at RPM!!

[@bigb6548]

I installed one soon as I got the buggy home. Works like it should

[@Coyote.five.0]

i have this catch can in my x3 and compared to the evp i really like this is a one pice unit and comes with a sponge on the inside so it dosent splash back to the filter, i usually clean it more often during the winter but on summer i hardly get any blow by thanks to the rpm bov as well. the only thing im missing from my bolt on built is the cut out exhaust and im done with upgrades. thanks rpm for cool products made with pride.

[@traildawgsoffroad5156]

Are the screws stainless steel?

[@joshc63111]

Wouldn't it be better to have a sealed catch can, dosnt having vacuum inside the crank case help the ring seal?

[@RPMPowersports]

It does not help ring seal. If it weren’t for emissions standards the OE’s would vent straight to atmosphere like they did years ago.

[@joseavitia2762]

I have this same product and i saw while i was idling for about 5mins smoke was coming out from the filter im not sure if its normal ? Cant seem to find anything , need help !

[@RPMPowersports]

This is normal. It's just condensation on start up. Now you know what your motor has been sucking in!

[@mandytuning]

Any close loop catch can for us the guys that run under water and mud? I believe removing the filter and adding a fitting to hose up to the intake should work

[@RPMPowersports]

We mount the cans up higher on the frame rail.

[@traildawgsoffroad5156]

Also, seen guys run a extended hose to relocate the air filter higher up on the top cages

[@timeloop7983]

So i have same smoke from catch can this normal?

[@cboutdoorfun9955]

What is the little tube of blue liquid I got with mine? Loc-tite or lube?

[@RPMPowersports]

Loctite yes