Subaru Impreza GC8 WRX Complete Transformation Part 4

It's Alive!!!!! Its been a long time in the making but part 4 is finally here and the Subaru is back in one piece and ready for action! :)
So in this episode i go through all the processes of fitting a v5 STi intercooler to my v3 WRX in the quest for more power. If you have watched my previous videos you will know that the engine has been completely rebuilt and forged and now that i have fitted a bigger intercooler its time to turn up the boost and fuel and see how much power the Scooby can make.
Along with fitting the upgraded intercooler i also refit the air intake system ans cooling system, Unfortunately i wasn't able to reinstate the air conditioning just yet but i can always get that at a later date.
Once all the mechanical work was complete i set about repairing and repainting the front bumper as it was a bit battle scarred from years of abuse. once cured i fitted all of the front end panels and got the car back into one piece.
I then took a quick test drive (on my private road) to make sure everything was ok mechanically before making a start on the next episode which will be brake and suspension focused.
So i hope you enjoy this long awaited episode and i will see you again soon in the next video.
-------------------------------------------------------------------------------------------------------------------
A little History
The project in question is the engine bay in my 94 Subaru Impreza WRX. As i can be heard saying in the intro of this video i love impreza's and i wanted a rust free one as all the UK ones suffer from lots of rust issues so in 2004 i imported this car from Japan and it was totally rust free when it arrived all those years ago. It has a couple of blisters here and there now but thats to be expected when living in Scotland.
Anyway im getting off track, I was having lots of fun driving the car at full boost everywhere until 2014 when the thought popped into my head " lets go for more power" so i took the engine out and begun the process of having it all upgraded, better gaskets, race bearings, forged pistons, con rods etc etc then life got in the way and the engine was put to the side and the car was stored in a shed for the past 5 years.
The initial condition of the car looks horrifying but its only a thick layer of dust and crud on it and there is a good layer of carnuaba wax separating all the crud from the paint so a quick pressure wash and she'll be looking good again but for now the focus is on the engine bay and engine.
-------------------------------------------------------------------------------------------------------------------
A new addition to my videos from now on will be a water mark and my channel name popping up in random places throughout the video as im getting rather tired of people re-uploading my content as their own i hope you guys understand.
If you like what you see and have any ideas for the channel or would even like to donate something to restore to the channel please get in touch. :)
And as usual if you liked the video please like share and subscribe and help the channel grow.
Previous Impreza videos - • Subaru Stuff
If you would like to help support the channel i have a Patreon account - / rrcrestoration
#Restoration #Subaru#Engine Rebuild
Really Random Channel
Subaru Impreza GC8 WRX Complete Transformation Part 4

[@RRCRestoration]

Hey Guys, As you have probably noticed already i have updated the channel name and logo. The channel is no longer Really Random Channel it is now RRC Restoration. Just incase you were wondering why the water marks in the video still say Really Random Channel. Enjoy.

[@limfk7]

Do you do your restoration your rear driveshaft as well mine is the gc8 wrx sti v3 part number rear were Rear right 28021FA161 Rear left 28021FA171 (sadly oem stop productions already) The 1 short inner shaft at the left and the longer shaft in the right. Do your know where can i source the after market which same like mine car

[@UltimatumDemon]

I need someone to take care of me this good

[@mod.ts76]

Damn that’s a vibe

[@TheFunkyKettle]

Ha ha ha, yes dude, if only eh?

[@geoffwilson6975]

I have owned two wrx one sti and a p1 regret selling the p1. Never got fed up of the sound🔊 great program. Cheers Geoff.

[@HECSON23]

I like how everything is pretty straight forward! Not too much talking and more doing! Not like other channels they just talk a lot. Loving the restoration RRC!!! Keep it upppp

[@RRCRestoration]

Thank you so much for your kind comment :)

[@kungfusing1]

So satisfying seeing someone who takes so much time and pride in their work. Really enjoy this series.

[@RRCRestoration]

Thank you very much :)

[@michaelskinner896]

Wow, I kinda forgot about this one, and now I realize just how much I missed seeing your work! It's literally like watching a great movie. It just transports me to another place and time.

[@RRCRestoration]

Thank you so much for your kind comment :)

[@RedneckIrishman]

And..... Breathe! Woohoo! I love to see fabrication using the old-school techniques! Looking awesome brother! 👍👍👍👍

[@RRCRestoration]

Thank you! Cheers! :)

[@fr.mcgreer8349]

CAD Cardboard Aided Design

[@SNEEPER1980]

Stumbled on this channel and now I’m hooked! Love watching the start to finish and seeing the transformation of all the projects! Love it!

[@RRCRestoration]

Thank you so much glad you enjoy my work :)

[@BabaG]

wonderful to see it all go together. All bolts/nuts/wire connectors etc all seem to not give you any problems. I wish it was like that for me as well... As always wonderful to watch. Thank you for sharing.

[@jeremybell5543]

Being waiting for a new video from you to help get through lockdown. Many thanks and keep up the fantastic work.👍👍👍

[@RRCRestoration]

Thank you, Im glad you enjoyed it :) More coming soon ;)

[@sneakyfoz3692]

A lot of people don’t realise these older WRX were and still are great drivers cars, so much fun to drive, none of the BS gadgetry and driving aids like on the newer ones that sedate the experience. Always nice to see one lovingly restored to its former glory.

[@RRCRestoration]

Thank you for leaving a comment :) Your spot on these old Subarus are brilliant to drive even by modern standards, although ABS and an airbag would be nice haha

[@jasond7555]

Started watching Really Random Channel when I tore my Achilles last year. I’m up and around now, and I still can’t get enough of this channel!! Keep up the great work!!

[@RRCRestoration]

Hi, Really sorry to hear that it sounds painful hope your all good now though. Really glad to have you along for the ride plenty more random videos to come :)

[@BradyBegeman]

Really Random Channel hopefully one of those random videos is a rally stage in your kitted out Subie 😁

[@raoulraoulsen4716]

19:46 such careful work, all that equipment from angle grinder to sand blaster and even a painting cabin... and yet you're missing a funnel or even a rolled up newspaper to keep the coolant from spilling all over the place... ;-) Just kidding. Most impressive work again (so as not to say as usual, because I don't get used to it) and your video editing skills also are on a great level. Those self made brackets look just as they came stock. Absolutely awesome!

[@RRCRestoration]

Haha love the comment :) You know whats its like you can never find a funnel when you need one . Really glad you enjoyed the video and i hope to see you again soon in the next episode :)

[@silesianix]

big respect for how you take care of all details. This is a really very good quality job. not fast US standard "restoration"

[@barthanes1]

I like that you put the wheels under the frame while you had them off. So it falls on the rims instead of crushing you. Nice trick.

[@RRCRestoration]

Thanks 👍

[@georgestewart1325]

Stunning attention to detail love how your channel is all about your skills. You have a very interesting channel that’s a joy to watch.

[@RRCRestoration]

Thank you so much for your kind comment :)

[@DmitrySerbin]

Waiting for the next episode. That is amazing job done. Thanks for sharing!

[@RRCRestoration]

Already working on it ;)

[@cjr6564]

Great to see some content after quite a wait. Well done, it is coming along nicely.

[@RRCRestoration]

Thank you, Its good to be back :)

[@alistairdavidson9836]

Been waiting Patiently for this an you have not disappointed lad, great work as always, can’t wait for the next video 👌🏻

[@RRCRestoration]

Nice to see you again. Really glad you enjoyed the video, I promise there wont be such a long wait for the next episode ;)

[@waynetrain8033]

I forgot about this project. Thanks for taking me back to your shop🤙🤙

[@RRCRestoration]

No worries ;)

[@playboyflameboy]

You're like my spirit animal when you fix stuff. My gf thinks I'm mental but you keep my OCD in check. I also bet that filming and editing also must take a great deal of your time. Amazing stuff. Keep it up and thank you for taking the time to post.

[@justinturner4850]

What a stunning example of one of my favorite cars of all time!

[@hcolin4165]

Just what I needed...relaxing straight up build, No fluff just tool noise N a SUBIE!!! Nice;)

[@125sm3]

👏👏 Wow what a fantastic result, starting to take shape nicely

[@RRCRestoration]

Thank you very much :)

[@American_Jeeper]

She looks smashing, mate, a real work of art. Well done!

[@RRCRestoration]

Thank you :)

[@jimmycav369]

Great Video and good to see you back in the workshop. 350-400 HP will certainly be enjoyable when it's ready

[@RRCRestoration]

Thank you very much, Its good to be back :) Yeah it was really fun driving it with 260/270 hp i imagine 400 in a car as light as this with no ABS or airbags will be terrifying haha :)

[@piggymito]

That was a dinner break well spent, top work as always dude!

[@RRCRestoration]

Thank you so much, Glad you enjoyed it :)

[@petermclelland7869]

That red 🤩 ❤️. Great work as always 👏👏👏👏

[@RRCRestoration]

Thank you! Cheers!

[@joseph4285]

Love the car cant wait to see it all finished

[@alexmartin8839]

Loving these Impreza videos! Keep up the good work

[@RRCRestoration]

Thank you ,Glad you like them :)

[@boners4zinfandel]

love the wrx series, thanks for uploading

[@RRCRestoration]

Thanks for watching :)

[@YouSuckAtTag]

A good wash and detail is in order I think too! Love the car content!

[@RRCRestoration]

Yup that will be saved for the end when all the dirty jobs on the car are finished ;)

[@littletimmy4108]

I was waiting for the crunch when he reversed back in 😂

[@PaulHarkey44]

Very nice work! You make it look easy!

[@RRCRestoration]

Thank you very much :)

[@colinfiggins3372]

This is the nicest engine bay I've seen! Well done man!

[@RRCRestoration]

Thank you very much :)

[@StuartMaginnis]

Great to have you back!

[@RRCRestoration]

Thank you its good to be back :)

[@YammyCookiez]

Me and the wife love your channel. We have seen every vid and the waiting for the next one is murder. We love your work. Keep it up bud.

[@RRCRestoration]

Thank you to you and your wife, Im so glad you find my videos interesting and enjoyable :) , Next video will be here soon i promise.

[@RoadPatina]

Great work! Inspiring me to finish my GC8 build, or whatever we call them stateside.

[@dixonqwerty]

Every time I hear your accent, I am THIS close to buying a one way ticket to Scotland to settle there forever. Excellent video as always mate!

[@RRCRestoration]

we would love to have you, But could you handle the constant wind and rain? thats the question haha. Glad you enjoyed the video :)

[@dixonqwerty]

@@RRCRestoration I live on the Swedish west coast. We have plenty of wind and rain too, but not the Scottish accent to make it worth it :( LOL

[@fullboost]

Looking great :)

[@RRCRestoration]

Thanks very much :) Awesome to hear from you guys, love your channel! :)

[@Shinysideup]

Fantastic work as always.

[@RRCRestoration]

Thank you very much, Always a pleasure to see you.

[@myturkishlife1777]

Very satisfying video, nice methodical work 👍

[@RRCRestoration]

Thank you! Cheers! :)

[@cg9542]

Great job as always, keep up the good work 👍

[@RRCRestoration]

Thank you :)

[@TheMpuppy]

You've done an amazing job!!

[@MadMathMike]

Really great work! Thanks for posting! 😁

[@RRCRestoration]

Thank you for watching :)

[@TheFunkyKettle]

I enjoy watching this sourcery.

[@sofaramike8500]

Nice job bro it's another level of mechanic

[@e46turbomalina]

Dobrze sie to ogląda. Super robota

[@shaneweightman]

Glad I only owned and drove hard two wrx sti subarus , long before they needed any restoration, I haven’t got the patience or skills required for that part of vehicles , just riding and driving fast was my passion, cheers shane uk 🇬🇧

[@samcoote9653]

Oh yes! Im keen for this one! Makes me want to work on my forester lol

[@averagecarguy420]

YESSSS ANOTHER IMPREZA VIDEO

[@nosaint01]

love watching all your videos. the Subie was great.

[@RRCRestoration]

Thanks so much :)

[@jings_plus_us4407]

Beautiful engine sound

[@thomaspotemciano]

Just subbed. Also a first gen Impreza owner from the states. Keep up the good work

[@RRCRestoration]

Thank you so much watching and subscribing it means a lot :)

[@TheGCJourney]

I love this build!!! 😍

[@Alaa_Bino]

Perfect mate well done

[@simonwoodrow9572]

As always fantastic video 👍

[@RRCRestoration]

Thank you! Cheers!

[@pauloverbinski7418]

Wow! Magnific!!

[@Area51Corsair]

You did, as usual, a great job !!!!!!!!!

[@RRCRestoration]

Thank you! Cheers!

[@savage_han]

Awesome man!! Please make more vids like this!!

[@theoutlaw2213]

I'm a Really Random average fan, i hit the like button before the start of the video and at the end i'm simply stunning!😍

[@RRCRestoration]

Thank you so much :)

[@Zombie_Longwinger]

That engine looks top class Scoobys were everywhere when I was a lad they sound awesome not the prettiest of engine bays but yours looks great.

[@RRCRestoration]

I have to agree with you, A scooby engine bay is a very tough thing to make look pretty haha

[@6AL-4V]

A long time ago there was a great invention. It was called a funnel and it worked very well. You still can get them today at a good price!

[@6AL-4V]

Update: I like your channel and I am subscribed.

[@RRCRestoration]

Haha, Yeah i vastly overestimated how good my aim was :( Really glad you enjoy my videos and thank you for subscribing it means a lot :)

[@deanoloughlin6129]

Never clicked so fast .waited a while for this one ❤❤

[@RRCRestoration]

Sorry about the long wait between episodes i promise you wont need to wait as long for the next one ;)

[@deanoloughlin6129]

@@RRCRestoration awesome pal

[@soeren72]

As usual impressive work, there is a bookcase on the trunk :-)

[@ezequielsilva2709]

Carro lindo, parabéns!👏👏

[@roamin_ronin]

The voice overs are back! Your commitment to hand tools is admirable, I would have had an electric drill out after the 3rd fastener. Looking good. Rex's are my favorite car. I keep saying I am going to own one before I'm too old. Well done!

[@RRCRestoration]

Nice to see you , Yeah i like to do a bit of narration now and again just helps everyone to understand whats going on.... well that is when they can understand my thick accent haha. Glad your enjoying the videos :)

[@roamin_ronin]

Really Random Channel I’m from Texas, we have our own thick accents, so I’m used to it. Keep it up

[@habakanaba]

Its looking good!!💪🏼💪🏼

[@RRCRestoration]

Thank you :)

[@ericn7698]

Woohoo, content on the Subaru! Gonna make me a cuppa before I watch this one.

[@RRCRestoration]

Enjoy :)

[@HeIsTheHighlander]

Congratulations!

[@RRCRestoration]

Thank you!

[@ragemydream]

great work mate!

[@RRCRestoration]

Thank you :)

[@ruudmobile6726]

Top job man... love your vids

[@RRCRestoration]

Thank you, Glad you like them :)

[@cesartabaso6110]

How wonderful, an excellent job. I could use that red sleeve that you cut at admission 😂😂. It was great, like all your works like all your video. Congratulations.

[@RRCRestoration]

Thank you! 😊

[@supershifter4836]

This is going to be a 70k car if you continue renovating it this way! Good work so far.

[@RRCRestoration]

That would be nice :)

[@trabantfreak2370]

you just earned a new subscriber because i realy like you videos.

[@jasonphillips3865]

Nice work, great editing and content, too good for KZbin. 👍🏻

[@jasonphillips3865]

@STtyrone .Criticize criticize blah blah blah. You sound just like my ex wife and nobody liked her either.

[@RRCRestoration]

Thank you very much :) Always a pleasure to see you in the comment section.

[@keithspencersr.6806]

Outstanding

[@plageran]

Looking good dude 👍👍

[@RRCRestoration]

Thank you! Cheers!

[@rolandoramos8692]

Excelente trabajo!!!!

[@scottperezfox]

@19:48 I'm sitting here "please use a funnel!"

[@RRCRestoration]

Haha i like to live dangerously

[@user-dx6pt9oo6h]

Hi my friend 👋👋👋 good to see you 🤝🤝🤝 the engine compartment looks great, and the car itself is fire 🔥, you have golden hands 👍👍👍👌🏽✌🏻🇷🇺

[@RRCRestoration]

Nice to see you again, Thank you for your comment and im glad you liked the video and car :)

[@st3althyone]

Really nice “CAD template” there buddy! 🤣🤣🤣

[@RRCRestoration]

haha just my way of giving a nod off appreciation to the boys over at Bad Obsession :)

[@acvn-hg9gy]

looking good!!!

[@RRCRestoration]

Thank you :)

[@INtangiblesoluciones]

Great job !

[@RRCRestoration]

Thank you :)

[@aaronrowe7637]

love the content mate

[@RRCRestoration]

Thank you very much :)

[@josuecastillon5897]

Outstanding!🍻

[@RRCRestoration]

Thank you :)

[@sezginozkul6817]

I'm waiting for my dear friend BonBini videos like a stranger to you than the turkey itself greetings😁

[@asparagusman4481]

Awesome work i hope to have my gc at this standard one day. However I would highly recommend not heat wrapping the headers on Subaru's as it is the perfect wick for oil leaks to soak into and cause a fire. Heat Sheilds or ceramic coating will help with heatsoak aswell as ceramic coat lets you see any cracks that develop without having to unwrap or remove heat Sheilds. Keep up the good work

[@zero-k7466]

Man I crashed my gc8 3 weeks ago I'm so happy to see that you are taking so much care of your be safe with her

[@RRCRestoration]

Oh no sorry to hear that, I hope your ok?

[@zero-k7466]

@@RRCRestoration yes don't worry everything is solved I'm getting a new one

[@fenessinen]

I'm big fun of these cars I hope get clean one someday :)

[@arekxp1]

Brilliant job 👏👍💪💪💪

[@RRCRestoration]

Thank you :)

[@Deadlysphinx]

Great video! You can get a tool for straightening the fins on radiators/intercoolers. If you used one on that intercooler to fix it up, would look even better without having all those bent fins when you open the bonnet

[@jahazielruelas9877]

Great Job!!!!!

[@RRCRestoration]

Thank you :)

[@GreenGc8]

Great video

[@RRCRestoration]

Thanks!

[@NickDenizhenko]

With all due respect, be sure to use a protective cover when using a angle grinder. It can cost a life, don't neglect it.

[@PabloDelafuria]

a finger's life*

[@diytutorialsandmore9804]

Never used one blades blow up into tiny fragments there designed to those fragments are nothing more than a rude shock

[@W333dm4n]

this is my dream car, and i want to restore it myself as well. got a new wrx, need an old one now

[@rcaxialscx10]

amazing !

[@hussainamin5145]

look like brand new engine nice

[@RRCRestoration]

Thank you :)

[@jacobroman3168]

I fucking love this channel... this guy is a FUCKING ENGINEERING MONSTER!!!!! Very relaxing watching him WORK😌🧐

[@RRCRestoration]

Thank you so so much for your kind comment :)

[@taosavant7790]

oh man... those welds thoo ahhhh!