RTH2410B HONEYWELL THERMOSTAT HOW TO INSTALL, CONFIGURE AND SETUP SCHEDULE

PROGRAMMABLE THERMOSTAT
RTH2410B1019/E1
how to install this Honeywell home thermostat. wiring for heat, cool & heat pumps systems plus thermostat initial setup and schedule setup.
#thermostat #d2dnyac

[@rudedias]

This was just the perfect amount of instructions to help get the job done. Thanks.....

[@D2DNYAC]

Thanks 🙏 for stopping by

[@d3l1a2704]

I purchased 2 of these units probably 6+ months ago now, and they are really good units. kzbin.infoUgkxcr5WULFU6yC9UUKc_cdNJT9jGa6VxO1l They are great for 3d printer plastic dry boxes, freezers, vehicles, gun safes, and more. The unit in the picture was pulled from my deep freezer and moved into my truck center console (monitoring humidity for water leak). It took a few hours to thaw and normalize temp and humidity reading going from those extremes, as expected, but it handled it well and is still running great.

[@D2DNYAC]

Thanks for watching

[@user-xw5sm4uy7w]

*Works well in my home **Fastly.Cool*

[@D2DNYAC]

Thank you for stopping

[@mega23slots]

Thank you so much for showing your paper instructions because I lost mine in a truly help me set my system up with your step-by-step even though I have a heat pump. Great video

[@D2DNYAC]

Thanks for stopping by

[@dilcia3984]

DUDE!! Thank you so much 🥰. Your tutorial helped me a lot. I've never done this and watching you made me feel better about installing the thermostat by myself. Thank you so much!

[@D2DNYAC]

Thanks for watching

[@garysingleton4615]

Nice video I have a Honeywell thermostat just like you when I put it on cool it blows hot air in the o terminal

[@megasagi19]

Hi, how do you update your current time before setting a schedule for each day? It’s 7:15 PM East time zone and the thermostat shows it’s 1:30 AM. Thank you

[@LauraGarcia-kd1dh]

Hey 👋 I Have the Same Thermostat But Why Does It Stays In 85 And Doesn't Go Up Or Down ? A Little Help Please 🥺

[@D2DNYAC]

What mode is the thermostat in? Cool / heat or off!

[@D2DNYAC]

If cooling what temperature is it set to?

[@y0ungxrist505]

mine is stuck at 84 too :/ it’s so hot and i have the hold button on 55 i’m so confused i just want it to blow cold air until i say so ://

[@refrigerationconfidential4376]

👍Nice Video

[@marshallandroxy]

Thank you for the video - I have a problem - When running my upstairs air conditioner, the induction fan cycles up and runs for a minute, then turns off - repeats a few minutes later until a/c turns off. From what I've read induction fan shouldn't be turning on if the a/c is running (it doesn't on my downstairs unit). Unit is running fine otherwise, red light on circuit board is solid (no errors). Ideas as to why the induction fan cycles off/on when running a/c?

[@D2DNYAC]

More than likely, wiring issues!! What happens when you turn on heat?

[@PriyaMomma]

My fan works when on “Auto” but it does nothing when I put the fan to “On”. Any ideas?

[@D2DNYAC]

There’s a number of possibilities, tell me more!

[@indyjones6708]

Thank you for your video. Very helpful. After installing the thermostat, the compressor doesn't start. Is it programming issue?

[@D2DNYAC]

@indy Jones there is a default 5 min time delay before compressor starts in thermostat!

[@indyjones6708]

Thank you so much! big help!@@D2DNYAC

[@lalolazcano90]

Tank you so much

[@D2DNYAC]

Thank you for stopping by

[@renecuevas4128]

Honeywell is a great Thermostat but for Average people is hard to do the SETTINGS

[@D2DNYAC]

Agreed

[@renecuevas4128]

Tnks 4 showing this but when u are on the Field u need excellent Wi fi to see it Also if lost the paper work is difficult to set for Average people ....I m a serv tech.

[@D2DNYAC]

Thanks for watching

[@pell557]

I have a orange wire hooked up to O/B on the old thermostat , so where do i connect it now. I also hava a blue wire so where do I connect that one

[@D2DNYAC]

Depending on geographic location if you are down south like say Florida most likely it will be B terminal and if you are in the north say New York O terminal most likely and then go into setup menu and set option 1 to 1

[@D2DNYAC]

@Pell 557 what terminal on the old thermostat did the blue wire came from

[@nnavigater1]

@@D2DNYAC on my old thermostat blue was to common (c) terminal I was told to do away with it

[@bills6946]

The only thermostat I install is the Honeywell TH 8321R. Covers every installation and is RedLink. Installer screen is locked so the homeowner can’t tinker and cause a callback. Never had one fail on me yet

[@D2DNYAC]

Good information

[@trubygaldamez8115]

what happends with the c wire?

[@D2DNYAC]

Thermostat is battery operated requires no C wire

[@alfredhines505]

The colors of the wires should matter when connecting the thermostat.

[@D2DNYAC]

Whats important is that the thermostat wire connections is matching that inside the A/C or HVAC equipment. Meaning Y at the thermostat goes to Y inside the HVAC equipment R to R etc.

[@ChildofGods123]

I can't get my honey well heater to work and I don't have the instructions

[@D2DNYAC]

hello everything you need is in the video, thermostat has to be setup for heat for it to control the heater

[@craftypassions1754]

I'm having problems in setting mind will you help thanks

[@D2DNYAC]

What problem are you having?

[@craftypassions1754]

@@D2DNYAC I'm not able to set to heat it keeps blowing cold air

[@D2DNYAC]

@crafty passions what type of heating system do you have? Is this a new thermostat installation? Is the thermostat set and calling for heat?

[@noahchristopher7461]

@@craftypassions1754 how did you fix it?

[@suedavis5512]

How to take off Temporary and just use as a regular thermostat. Can’t manage the settings. It got messed up when I had to change batteries

[@D2DNYAC]

Do you mean use schedule?

[@D2DNYAC]

Just press run to use schedule or press hold to maintain current temperature set point indefinitely! Or forever 😂

[@edwardrao8651]

Does not show how to rewire. Does not show how to remove the connector between R and Rc

[@D2DNYAC]

Call a professional

[@megasagi19]

Hi, how do you update your current time before setting a schedule for each day? It’s 7:15 PM East time zone and the thermostat shows it’s 1:30 AM. Thank you

[@D2DNYAC]

@ynes Castillo @ 17: 30 I set the time or clock in the video