In this video Ruger shows you how to properly disassemble, clean and reassemble your SR22®.
Пікірлер: 89
@teddyruxbin77694 жыл бұрын
This thing is a tac driver. Honestly one of the most accurate 22 I've ever shot. Very impressive grouping. Using cci mini mags, performed flawless. Excellent work on this pistol
@lbaker3602001 Жыл бұрын
I carry my .22 as my conceal carry, my Ruger 9mm sits in my truck, & my Ruger 10/22 Takedown sits near my back porch fully loaded.
@TimeToBeKind3 жыл бұрын
YOU WILL BE IMPRESSED WITH what I’m about to tell you: Five days ago I got this gun on a trade because the gun was slowly feeding, “shooting all over the place” and the magazine would sometimes fall off while shooting. I looked at the gun and I immediately knew why, so I asked the man 3 simple questions: when did you buy it? How many rounds have you put through it? How often did you clean it? His answers: “a few years ago and I shot it over 10,000 rounds... and I never cleaned it because I don’t know how.” I took it all apart, the barrel was oval, with 82grns of lead buildup. Yes, I actually weighed it because when I looked in the barrel, the riffling was covered in lead for about 3” out of the 3.5” BTW, if my name sounds familiar, I was always picking up guns for the shop at your Wayne facility on Rt 23 in NJ. I’m now in AZ. since 2001... Small world. I need a barrel kit for this, when will you have them in stock? I’m keeping the gun, I want the longer barrel. Thank you
@MegaBait1616 Жыл бұрын
I don't think that place in Wayne NJ is there anymore..... Bought a house in NC and got out of commie NJ. be well..
@JeepBoiFL7 жыл бұрын
Hey Ruger Guy Darren, THANK YOU!!!!! I love my SR22, best handgun ever...............
@timlange5317 жыл бұрын
Please redo with the camera much closer with the gun filling the frame.
@darwinstem89674 жыл бұрын
@Officer Murphy wwaw
@zacharyc88064 жыл бұрын
It’s nice to see a video for Ruger from Ruger. I was a little uneasy just watching some guy (the other videos) who was willing to make a video not knowing their experience.
@crankybuzzard68676 жыл бұрын
Thanks for the video.... I have two SR22s.... and even my daughter has her own. They work!
@thetrain57857 жыл бұрын
Ive clocked 6000 rounds thro mine no issues rugers customer service is still old school they take awsome care of there people anyone who says otherwise has never called them!!!
@lordmasterization9 жыл бұрын
Only the slide needs oil? Nope. The slide release gets jammed up with junk after 2 range trips. It will get to the point where you have to pull the slide back and release. 22 lr is dirty, very dirty.
@LoCoZoMbiEKiLleR9 жыл бұрын
Maybe this should be titled takedown and cleaning not "tech tips"....just sayin
@Redpill_to_MGTOW8 жыл бұрын
thank you Ruger for the video. Helped a lot.
@charlesbowen70095 жыл бұрын
What a fantastic .22! This gun has become my favorite! The functionality is top notch and the accuracy is spot on! Comfortable to shoot and the sights are easy to use. This is the best Ruger since the 10-22.
@jdontcare85202 жыл бұрын
Better than the GP100? I would disagree. Awesome firearm though!
@CScav2438 ай бұрын
@@jdontcare8520I have one of the first GP-100’s. 4” bbl, stainless, adjustable rear sights, And it is very very accurate. I think I got it in 1986 but can’t remember. Great comment
@jh83386 жыл бұрын
Use NON-chlorinated degreaser/cleaner only!
@Frank-uf2vn6 жыл бұрын
Its nice to see Gary Busey working again !
@timmygilbert13713 жыл бұрын
lol , yep .
@perspicator5779 Жыл бұрын
Too funny!🤣
@datdudenosense5 ай бұрын
I thought I was the only one😂😂😂😂
@johngrunwell24125 жыл бұрын
Only one point not mentioned here is to keep the SAFETY OFF, disengaged while disassembly and re-assembly.
@gabydiy87162 жыл бұрын
Why? I just got one and I am curious
@johngrunwell24122 жыл бұрын
@@gabydiy8716 The hammer needs to be fully to the rear (cocked) in order to smoothly bring the slide back and up. You my still feel some hammer resistance. When in the safe-position it makes this action very difficult both removing and reinstalling the slide.
@gabydiy87162 жыл бұрын
Huh I wonder if that's why I was having some trouble
@garla58517 жыл бұрын
Ruger ,, might want to get a little closer with the camera in the future. Cheers 🍻
@davidtheodore10597 жыл бұрын
Gar La
@genemaysonet35582 жыл бұрын
Just bought one and I love it only one thing why not have a captured spring it's so much easier other than that I give it a 99.9 Thank you my 2nd Ruger .
@justinhamrick24496 жыл бұрын
Scratch my barrel putting my slide on real hard to get back on at first
@drifter94259 ай бұрын
NOTE Take off grips before spraying solvent or they may become soft gummy or damaged
@pantheraonca83415 жыл бұрын
I'd love to see an sr 380
@larrygerlach48369 жыл бұрын
Do you also have a similar video for your model 10/22? I recently got one and love it. It does, however, get extremely dirty. Obviously I can clean it, but I'm sure there's a "better way"! Thanks.
@kenmoist Жыл бұрын
Why did you design the safety to operate backwards from every other gun? Geez
@daffydill58076 жыл бұрын
It needs a metal take down lever.
@NLINE75 жыл бұрын
I agree there needs to be a safety recall for the SR22 because of the plastic take down lever.
@edmiksis5660 Жыл бұрын
I was just wondering did you call the bomb squad 2 in case something blows up
@maximus1234ification4 жыл бұрын
Mine's a POS!! Just bought it and im stovepiping every available brand of 22lr.
@cthulhux63613 жыл бұрын
You may have to file away a little lip right at the end of the feed ramp left there from the machining process and making rounds get hanged up in it. ( I had to do it to mines; its a few tutorials on youtube kzbin.info/www/bejne/iH-4g5ekZdaYlck after i did that mines eat anything. Another thing to check is that the recoil spring is inserted the right way like he showed with the big part touching the edge of the slide. But most problems is on the feed ramp. Hope it helps
@williampiergiovanni522724 күн бұрын
Very friendly / professional demonstration….
@allenmills94493 жыл бұрын
Here’s a tech tip for you, the safety is backwards
@pedrorosales598 жыл бұрын
I like this gun!
@puschmannn4 ай бұрын
this gun with higher mag capacity, come on , pls ^^
@WhatkindofAmerican6 ай бұрын
Any tips or tricks for a bulged barrel?
@nerdyolddude49242 жыл бұрын
I love my SR22! It fits my hand like it grew there, no feeding problems. Hides well. My perfect "James Bond gun"!
@Steve-yz1eb Жыл бұрын
I call mine a "Bond Gun" too. Goes from wetsuit to tuxedo simply by changing grips. LOL
@datdudenosense5 ай бұрын
Yeah, no solvent on the polymer ty.......
@luckybassturd72609 жыл бұрын
why is the 'safety' on the sr~22 opposite to almost every other (Ruger) gun ever made? It is by far the best 22 pistol, with one real big training problem!?
@tc96z15 жыл бұрын
robert h the safety also doubles as a decocker. I love the pistol so I gave it my adult daughter because she can rack it comfortably. I carry a p938 Sig 9mm or Colt 1911 10mm Both SAO. I looking to replace it with a SAO Colt 22LR so I’m not Training ‘backwards’. It’s a great gun but SR 22 but it’s just not going to work for what you want.
@buddycarroll96413 жыл бұрын
Lucky Bass Turd. I have a problem with the backward safety also. It's a crazy setup and hard to operate.
@jimeckenrode12713 жыл бұрын
actually it is the way it should be all the others are wrong
@thepistolguy859 Жыл бұрын
I have a Taurus pistol with a decocker and it still works like a safety should up safe down ready and push down again it's decocker
@perspicator5779 Жыл бұрын
Why do I continue to have FTF's, or "light strikes" with differet .22 ammo? Love the gun though! Fantastic ergonomics! Accurate too!
@retiredelevenbravo8565 Жыл бұрын
Bought one for my wife, (purple) a few Tandemkross upgrades and a CT laser. Never had one single issue, handy little pistol, accurate and fun.
@mainely80073 жыл бұрын
When you designed this gun wtf were you thinking with that magazine safety lever that seems to be a growing problem? Just got my new SR22c and it's already got problems based on a bad design. Yeah sure I can fix it but a brand new firearm that requires me to do repairs before I can fire a round?
@mikecondoluci532 жыл бұрын
HI DARREN I JUST BOUGHT THE SR22, WHY DID THEY CHEAP OUT ON THE RECOIL ROD, SHOULD BE STEEL NOT PLASTIC .......................... SAVED A NICKLE I GUESS, OTHER THAN THAT NOT A BAD LITTLE GUN
@600miles Жыл бұрын
2:14 Air Duster in a can works great when there's no compressed air handy.
@rickrivers29092 жыл бұрын
do a video for the mk1 mk2 mk3 22. Many people get frustrated disassemble and reassemble.
@MrTrollHunter4 жыл бұрын
Awesome little gun, but why the heck did you have to make such a crappy trigger on an otherwise awesome gun.
@zemo2332 Жыл бұрын
Can you make a video for 10/22 tactical rifle 22 LR?
@MrPlecemanvpd Жыл бұрын
Mine has light primer strikes with each mag. Already been back for a safety recall.
@maryc35903 жыл бұрын
The camera is too far from the gun. Cannot see the detail as compared to other videos of same subject.
@CScav2438 ай бұрын
Thanks Darren
@anythingiron697 жыл бұрын
Hey Ruger guy, trying to change out the clip bottoms of my 22 with the longer ones that come with the gun. The plastic projection on the lower spring follower will not engage the longer bottom plate. I have checked the hole for flash and the right size, what gives?
@stevebillieroberts95824 жыл бұрын
Hello when cleaning this gun ,is there any problem areas hat you should look out for
@joereidoutdoorsman.31363 жыл бұрын
How do i get the guide rod spring out if its stuck.
@karinevans7547 жыл бұрын
Is there a way to lighten the trigger? I am having trouble pulling it.
@AEtherimp7 жыл бұрын
I want to know this as well. I've heard bad things about the trigger pull, and want to purchase one of these for my girlfriend. I've "heard" there is an easy fix, but would prefer to hear from the manufacturer what they recommend.
@karinevans7547 жыл бұрын
AEtherimp I called the gun shop where I purchased it & they have a gun Smith that said he can lighten it for 80 bucks.
@shaggycar16 жыл бұрын
ya right??? bullshit
@therugbee6 жыл бұрын
This cleaning, lubing procedure works
@briansmith28195 жыл бұрын
i bought a new ruger( my first gun) 2 months ago. took it to the range ... day one double feed , failure to eject. took it home cleaned tried new ammo cci . took it to range same issue . i am very disappointed with ruger . i think it is dangerous to shoot. the gunsmith sent it off for me , he said something is wrong with it. now i have no gun ., it has been 2 weeks now.
@Fredthehead23 жыл бұрын
Great video ty love the sr 22
@francheskaexists36546 жыл бұрын
Darren , will you marry me . 😂😂😛😛
@AlCapone100032 жыл бұрын
Gary Busey!
@michaelchesny6562 жыл бұрын
Thank you.
@briansmith28195 жыл бұрын
it is a sr22
@Jerry-Parker6 жыл бұрын
Good video 5⭐
@767dag8 жыл бұрын
The take down leaver broke , and very hard to talk to ruger...
@SeamusMacMattain6 жыл бұрын
mine came with a bent extractor, Ruger had me handled, fixed nd shooting in about 8 days total
@arthursmith6437 жыл бұрын
You get what you pay for. Have some fun with this gun. There only a few hundred bucks. When it breaks down with wear see if you can trade it in and get some bucks for it towards something else.
@drifter942510 ай бұрын
You unfortunately designed it with WAY to hard a trigger so now gotta spend money and time sending it out for a proper 2.5 pull very disappointing
@benjaminluera48267 жыл бұрын
Where did you get that long bore cleaning tool?
@tosh.0es4564 жыл бұрын
My take down lever will not come down how do I fix that?
@gabydiy87162 жыл бұрын
I used a flathead screwdriver because I have longer nails at the moment. I do wish it were metal to because I'm worried about damaging it
@scarakus8 жыл бұрын
So I bought one of these... I own several Rugar's (6 to be exact), unfortunately this SR22 is a lemon (L E M O N)! I cant believe Rugar let a whole run of these get past QC? 1. The barrel is out of round (maybe too much feed rate when drilled) is my best guess... 2. The firing pin SUCKS, it's not the rounds, maybe a weak spring? maybe a malformed firing pin? Unlike Hickok45 and 22Plinkster, I am unafraid to speak bad about it... "What a piece of crap!"
@SeamusMacMattain6 жыл бұрын
sucks yours is bad, mine had 1 issue which Ruger promptly fixed (bent extractor) and otherwise has functioned flawlessly within the limits of 22lr ammo
@thomaskennedy6786 жыл бұрын
what a piece of crap just bought one new it has never shot a round and it never will cuz it didn't work brand new won't fire a round SMH ruger I have lost respect and lowered my expectation for the Future weapon from ruger