Ruler Marking Gauge with adjustment function 調整機能付きマーキングゲージ

[@jisakukobo]

I hope you will share my videos with your friends!

[@MrDaneBrammage]

I don't think my Super Nintendo System has that function.

[@housekeeptech5504]

@@MrDaneBrammage 7uuûjy

[@mrmjspencer]

Why don't you use an old steel ruler as the bushings - same metal much longer before adjustment needed or wear?

[@grimsworld]

@@mrmjspencer so the replaceable part is the part that wears not the ruler

[@cackleberryfarm4598]

If I had friends, I WOULD!!! 😁

[@tomhofmann5277]

Early morning in Argentina and the sheer pleasure of seeing you work, whatever it is you are making, puts a smile on my face and sets the tone for the day to come! Thank you sir.

[@digitalbaka7722]

I love that you are so often revisiting your designs and improving them. Clearly what you are making has purpose and is used instead of being left to gather dust after only a few uses. Great work as always!

[@stephmo371]

JSK's work is one of the few things that gives me full satisfaction of a project well done. Outstanding work as always 👏🏼👏🏼👏🏼

[@cyrilnorrie8450]

Fantastic! Every tool or jig that you make is extremely accurate! I know that every project that you build would be of the same standard. Thanks for sharing.

[@reygannery3457]

i subscribed just recently and already made your channel as a foundation of my guidelines in terms of accuracy, simplicity and neatness.

[@jackyzhang5400]

Most beautiful and clean work I have seen on youtube. Master pieces!

[@DanKoning777]

*どうもありがとう* for all the time/effort you put into your videos that we get to enjoy.

[@arturlend2297]

Najlepszy w tym wszystkim, to jest ten "celownik" do punktowania 😁. Ale ogólnie to ładna robota 😎

[@stewartmcmanus3991]

Morning in south west Australia. Cup of tea and watching the birth of a beautiful and very practical tool.

[@walterspreiter]

Das ist eine von den Besten Bastel-Seiten im You Tube, alles so ruhig und Genau

[@ebarboni226]

Excelent video as allways... as a teacher, i tend to share the slider ruler with my students, and what i see is that they forguet to unscrew the fixing screw. i sugest you to add a material on the screw-ruller interface such as a bronce strip to avoid tearing off the numbers. Best regards!

[@ВасилийБредюк-с3ъ]

Очень аккуратно и красиво сделано! Всё показано чётко и ясное.Качество на высоте.Спасибо за ролик!

[@maitanikazu]

最近よく使われてるポンチ、JSK工房さんの美しい仕事を見ていると欲しくなります。こんな緻密な仕事はとても出来ないのに（笑）素晴らしいです。

[@jisakukobo]

このポンチはもう7年以上使っている愛用品です。 仕事じゃないですし、時間をかけて丁寧に仕上げたいときに使っています。 送料別で40ドルでした。

[@USER-q8y7k]

I like your work's precision, and your simple ideas !!! Good luck with more videos !

[@denisdesmarais5792]

Hello JSK, Suggestion : If it's possible , just please enumerate the brand of the tools that you use it your video. It helps people that want to do the same. I'm talking in all your videos ! Thanks, you do very precise/clean works! 🙂

[@homemadetools]

Nice work as always. We shared this video on our homemade tools forum this week 😎

[@jaimevidalteller7265]

Disfruto mucho viendo sus creaciones y la pulcritud con las que las realiza, gracias maestro

[@antitheist9976]

Absolutely captivating watching you work. Stunning device. I would love to see a blooper or gag reel one day, that is if you even make mistakes 🙂

[@alknis]

Как и всегда отличная идея и прекрасная работа. Спасибо за идею. 👍

[@wood4me]

At 0:50 only one of the brass strips needs to be movable. The other piece is fixed square. And therefore you only need one screw in the middle of the moveable brass piece. 3 adjustments no longer required.

[@Brian18741]

Exceptional attention to details as always 👌👍

[@александрбубнов-б8е]

Здравствуйте! Я восхищаюсь вашей работой! Дай БОГ Вам Здоровья и успехов на Вашем поприще!!!

[@jisakukobo]

Thanks for your comment. I hope the video helps.

[@Marcelo-56]

Herramienta muy útil y práctica, construcción de calidad, trabajo muy refinado. Saludos desde Argentina 🏳️‍⚧️👍

[@dallinostler4794]

I wish I could be as calmed and relaxed as you while working with wood.

[@CarlosHenrique-li4vf]

JSK! Vc é incrível, o melhor de todos no yt em caprichos, os trabalhos ,as limpezas. Parabéns!!!

[@santopino756]

Well done, next upgrade, a small cutout to see the numbers better and add a blade for the arrow across the cutout to help align. Further upgrade, you're always using a marker, insert the marker in the instrument.

[@dimanemalzev6165]

それはあなたのきちんとした仕事を見てうれしいです！

[@dimanemalzev6165]

@@CScarsten Jede Sprache ist gut. Und all diese elektronischen Übersetzer vereinfachen die Aufgabe.)))

[@harmonicentropy2720]

Love the design. If you were selling this product I would definitely buy it from you.

[@MCsCreations]

Beautiful work, dude! Really fantastic design! 😃 Stay safe there with your family! 🖖😊

[@LouisBeleos-ou1oq]

Thanks!

[@jisakukobo]

arigato!!!

[@georgefingall9447]

Facinating! You guys are so fortunate to have all those little accessories at hand to add to your dexterity of craftman ship. Anyway, those male and female screws what is the right name and where can they be otained. Thanks.

[@wood4me]

Just a light hearted comment - If I made the marking gauge, I would firmly fix one strip of metal and use the other piece to connect against the ruler. Cheers.

[@stefanpaprotny7292]

Świetny patent. Super pomysł i wykonanie. Pozdrawiam.

[@nilsonprestes1982]

Muito bom. Parabéns pela construção da ferramenta. Muito útil e obrigado por compartilhar suas ideias. Abç. "Brasil".👏👏👏👏

[@José.AZampieron]

Esras muy proficiona , expetacular . Parabéns👋👋👋👋👋👋👋👋

[@jimw544]

As always, wonderful work and another piece of art.

[@antfactory_kit]

Wow.. your making video is always awesome.👍 Thank you for sharing a nice video😊

[@viorsa8200]

Excelente proyecto muy bien desarrollado y mejor ejecutado, como siempre un trabajo fino e impecablemente terminado, gracias por compartir sus conocimientos y experiencias, con los pobres mortales, un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🔝 🤓

[@joewhitney4097]

Enjoy your videos so much. You are a great craftsman with great ideas. Thank you so much for sharing.😊

[@jisakukobo]

Thank you. I will continue to make many meaningful videos. By all means, I would be happy if you could introduce the video to your friends and SNS.

[@BoB-Dobbs_leaning-left]

So it's like a compound square? Excellent looking job and an attractive design.

[@bobshepard4423]

What is the "sight glass" you used at about 12:53 in the video?

[@Slemi]

Great update. I would grind a little of the corner of adjustable brass parts where you insert ruller for easier insertion.

[@ironwood3201]

Thank you for solving this problem by very nice and easy way, good luck

[@valick1977]

Как всегда великооепно!!! Не могу найти видео по изготовлению керна в виде шахматной фигуры с прицелом.

[@RodrigoDoBrasil]

“Ruler Marking Gauge with adjustment fonction” or “The Art of making something that was already perfect even more perfect". For once, I have stopped my work to look at yours. Normally, I use to go to bed with your video. You have to stop being so dame good because I running out of compliments. Domo Arigato.

[@cleilsonsoares6181]

Um dos melhores do mundo. Meus cumprimentos aqui do Brasil.

[@geronimoodorizzi6304]

Top parabéns 👏👏👏onde posso conseguir esses manípulos ?

[@JoeMcLutz]

I do love your works! 👍🏻

[@jisakukobo]

ありがとう

[@billyblackie9417]

That's a great idea with metal guides at the sides to prevent widening? Great I see this now before I make my own based on your template thanks

[@Andy-Jeon]

Пересматриваю уже наверное в 5й раз, и теперь буду делать себе такую штуку )

[@Douglas-hw8is]

Beautiful and elegant 👍

[@jcd8851]

French: Bonjour Merci pour vos splendides vidéos de grandes qualitées. Une petite idée afin de ne pas marquer la règle j'utilise soit une vis en nylon soit un petit embout de nylon entre la vis laiton et la règle. Un abonné qui vous suit depuis la France

[@chrisg7938]

J'allais faire la même remarque ! Merci 😉

[@patho279]

Moi je l'ai fait en mettant un bout de caoutchouc de chambre à air de mon vélo entre vis et règle? C'est parfait et s'il faut le changer ben pas de problème. la règle métallique aussi propre qu'au début !

[@522EMEL]

“There are eleven of us in the family, I’m the most nervous” 🤣

[@gachu_]

amazing attention to detail! 12:55 can someone tell me what tool is that?

[@siamaklighvani3951]

I think it is a good idea to fix a pad under the tightening knob , so that it is not scratching the as ruler.

[@mihaildmitriev3423]

Hi! Your channal is the most useful in KZbin. Thank you for your high skill and lessons. I've learned a lot from you ..

[@j.guteDinge]

Professionelle Arbeit.👍😉

[@belkhirbenhalitem5909]

Excellente travail et belle règle 📏 merci

[@rodolfoabreu9586]

Hello friend. I've been following your videos for a few days and I'm enchanted by each project. And I'm also enchanted by your tools and the care you show with each one of them. Could you tell me where I can purchase the center marker punch you use? This one has a kind of magnifying glass that helps you visualize the line. Thank you very much.

[@raphprobably]

I had to search it up too. They're called optical center punches. Pretty pricey for a center finder, but after seeing it being used I'm going to need to add this to my list of things I want but will wait to spend a gift card on.

[@martindornhofer1591]

Beautiful Tool!👍😊 I want some….🤗

[@владимиркравченко-ж5м]

На душе стало немного тоскливо.Да здравствует Кувалдометр!

[@ScottMattes]

Does the screw that holds the ruler, the screw on top center, not scuff the numbers from tightening?

[@jisakukobo]

No problem at all.

[@javirodify]

man you are good! I just wish that you share the tools you used as well as the supplies, like the pencils, double sided tape ( I have asked for this before).

[@DellyFurtado]

I second wanting to know at least what type of double sided tape JSK uses!!

[@patho279]

@deltonthompson5448 He never answers our questions.... Very bad and annoying!!!

[@sergeychubarev3724]

A very beautiful thing. You will not find such high quality in the store.

[@thomasgibbons353]

What is the tool for locating dead center on the brass plates for drilling?

[@bluesky6327]

I enjoy your videos so much! There’s always something thoughtful to learn from your designs and your skills. Where could I find one of the angle guides you frequently use?

[@jisakukobo]

Could you tell me the timeline of the video?

[@husseinasemy8204]

شغل رائع ودقيق --سر النجاح الاتقان في العمل

[@darkfactory8082]

Damn, I get goosebumps every single time I watch you build something, for various reasons and your kanal is one of my absolute favorite. Outstanding as always, still admiring the level of precision you obtain with wood and aluminum. Keep on, exquisite content! 🤐😁

[@darkfactory8082]

@@CScarsten Possibly, that means when your skin hair gets standing and you feel cold in your back... =) 🤐 Bzzzz....

[@rizu7042]

他の動画で使われてるのを拝見してとても気になって探しました。でも、作るのにも色々道具が必要なので我が家では無理😢商品として販売はされて無いのでしょうか。

[@jisakukobo]

道具のいらない作り方も過去に紹介しています。 kzbin.info/www/bejne/i5S5oXyqrtSWo9U 後半はすごい道具が登場しますが・・・・

[@rizu7042]

後半すごいですね🤩前半の方法で少しデコってみようと思います。ありがとうございます😊

[@jimw544]

do the plans include a source for the hardware?

[@lesbricolesajo9456]

Hello, good job. Where did you buy this magnifying punch please ? Do you have a link ?

[@glittalogik]

It's called an Optical Center Punch, there are heaps out there :) www.google.com/search?q=optical+center+punch

[@daifeichu]

Lee Valley had one made by Veritas here in Canada but it seems they don't carry it anymore.

[@randomsandwichian]

This would work so well if it has 2 functions, one to measure at right angle, and another to get perfect circles. No more compasses necessary.

[@gigsplace]

A ruler with a center slot. Two different tightening screws to make both designs work maybe?

[@ashraf61]

Excellent and Perfect Job. Thanks for sharing. ;-)❤

[@NWMT]

Do you ever give product links? I am looking for the marking rule as shown in the video. I've seen it used elsewhere in your work, too. BTW: Thank you for your content.

[@bnic5776]

Shinwa

forgive me if I am wrong, maybe some kind of grease would make friction as low as possible. and options of adjustment is very convenient. love your work vey much.

[@davidmiddleton3511]

Great workmanship.

[@T.S.Beez01]

the "see through" brass & glass? Centre punch with crosshairs. is this something you made or a purchased item? if a purchased item could I please have a link so that I too may purchase?

[@paperboardtv]

For the upper (light) part, make a ruler clip, in the form of a brass plate. Otherwise, the ruler screw will scrape the ruler and destroy the markings. This will make the plate slide over the marking.

[@phlippretorius8644]

Where to get that double sided tape?

[@pedro.federici]

This lens punching hole locator.... What is this? Is this for sale? I just loved it. I developed a few technics to locate screw rivets, threaded inserts and somethigs like this. But I just want this one. Less mistakes in just one tool.

[@pedro.federici]

I've saw a lot of your videos using this tool. I just loved. Really. It's a very nice way to make precise marking hole

[@pedro.federici]

At 13:00 minutes

[@jisakukobo]

This is a tool called an optical center punch. It is commercially available.

[@sergeychubarev3724]

Great job - great result!

[@amtiensinh8416]

Very nice, exactly and creative 👍

Excelente sugerencia. Gracias por compartir. Saludos cordiales de Gustavo.:.

[@TTAJ]

영상 잘 봤습니다 또 오겠습니다!

[@HOUSEVIDEOP]

JSK, Parabéns ficou ótimo

[@mafr3552]

did enjoy as always!

[@МихаилМихаил-х5ц]

Greetings! At 12:58 there is an interesting device. What it is? Thank you.

[@edmc755]

WHAT BRAND OF DOUBLE SIDE TAPE DID YOU USE ????

[@kpoxacblp]

Лайк за видео! И особенно за керно! Интересно где такое взять?

[@MaratAbdikaliev]

Блииин. Теперь мне нужен такой прецизионный кернер. Зачем я посмотрел? 😅

[@roncooper6302]

Brilliant, as always. Best regards.

[@АлександрШарапов-з5ь]

ЕЩЁ РАЗ ПРОИЗНЕСУ: - «ВЕЛИКОЛЕПНО!» ТО ЕСТЬ, КАК ВСЕГДА!

[@jozefysiak7644]

You MASTER🙏👍💪

[@heavenseye55]

What’s is centre tool it’s?

[@vinigun]

Veritas optical center punch

[@goliat17120]

Good job 💪💪💪

[@allynmcfarlin2074]

It seems like this should just be for measuring and not for squaring. You will always be fighting the play in an adjustable device you use to square. Just my 2 cents....

[@lamaseth]

Very nice, just put an "Iron Maiden" on this apron...please! 😊😊

[@billyblackie9417]

Beautiful I do that when fixing bolts or screws I screw down in opposite diagonal corners and then I tighten each one fully it keeps the item straight and flush

[@davidsuarezvidal356]

Gracia por su enseñansa esta muy perfecto mil gracia