Rustoleum Tub and Tile Refinishing Kit/DIY How to Paint Your Tub and Shower/ Tub/Shower Refinishing

[@AliciaLynnYT]

Rustoleum Tub and Tile Refinishing Kit: amzn.to/3qR3INb UPDATE‼ check out our 6 month update on how it is holding up! kzbin.info/www/bejne/iYillYN9npakrdk

[@annroda2868]

So I have heard. If I decide to go through with it, I have every intention as putting a box fan in the window so that the fumes are pushed out. I have definitely heard some nightmares about it.

[@isafrongia7259]

Alicia......ur the best. 😉 1) for calling the company (same time demonstrated the company's responsibility to this type of situation) 2) for giving better knowledge on the use of this. U were a teacher!!

[@Kapone27]

Thank you for posting about doing this and the issues so that people know what is correct.

[@chanproperties]

Wow. Love it! Both you and your husband has the patient to apply multiple coats and called the Company for help. I am also very much impress with the way the Company stands behind its product. My Dad would have called and started yelling, Sh*t hits the Fan...all bad. LOL.

[@AliciaLynnYT]

I was impressed with the company as well! Thanks for watching!

[@sf9145]

I just watched a video a lady did using the spray can method of this same product. She had the same problem of needing, in her case, 3 x the amount of product it said was required for the job. She also complained of the fumes and making her feel not well. At the end she said she wishes she had done the roll on application as you did, and I would agree because she had major dust issues with the spray cans. At the end she gave it a 2.5 at most 3 star rating. Your end result looks much better. Thank you for sharing!

[@AliciaLynnYT]

I have seen the spray can method and thought that would have to be even worse when it came to the fumes, this way was bad enough! Lol Thanks, we are really happy with the results and would definitely do it again!

[@MiamiSunrise]

About to refinish our tub and the information especially about what happens if more than 2 coats is needed is very helpful. That is not something I believe I would have heard anywhere else so I'm glad you guys were able to talk to the company. I wrote down that special note about that. Haven't done the job yet and already thankful for that information. Like others I would like to hear an update in 6 months and then an update in a year to see how things are working out if you have time :-) Thank you AliciaLynn!

[@AliciaLynnYT]

I'm glad you found the information helpful! I wanted to make sure and point the things out that we found out after talking to the company in case anyone else found themselves in a similar position where they needed to do more coats. I will definitely do an update but so far it is holding up great and I am really happy I did it. Thanks for watching!

[@bestbitesforever]

Wow! That ended up looking brand new. It took a lot of coats though LOL. I’m glad that you got such great customer service when you had to call the company. I have been thinking about doing my bathtub. After this video I think I will give it a try.

[@AliciaLynnYT]

It did take a lot of coats but it ended up looking great so it was worth it! I was really happy with the customer service too, now to see how it holds up! Thanks for watching!

[@matthewmace989]

To anyone doing this, I would strongly recommend using a respirator!

[@AliciaLynnYT]

Great idea! I wish I would have!

[@johnnycoolguy9554]

I want to add onto this. Not only should you use a respirator, you should use organic vapor cartridges, rather than the standard pink filters. Both the standard respirator filters and N95 masks will NOT protect you from the harmful vapors of the paint. N95 is designed to protect from airborne particles and infectious materials, and standard respirator filters only protect against particulate like dust or fiberglass insulation. Also, VENTILATE your work space. Do not forget this. Use a fan to push air out, and make sure there's both an inlet and an outlet for air. Don't keep your bathroom door closed and expect the fan to be able to move the air from the furthest point away. Bathroom fans will not provide adequate ventilation, do not rely on them. I made this mistake this past weekend. You might be able to get away with poor ventilation if you have the proper respirator and vice versa. But if you have extremely poor ventilation, and you have the wrong respirator, you will be inhaling a very unhealthy and harmful amount of chemical vapor that will give you respiratory irritation. Especially when you have to paint the floor of the tub. The vapors are heavier than air and will stay there until properly ventilated. I developed a cough, burning in my chest, and difficulty breathing almost immediately after I was done with the second coat. It's easily preventable, though. I was just underinformed.

[@AliciaLynnYT]

@@johnnycoolguy9554 Great information, Nathan! Thanks for sharing!

[@symone9301]

Thanks! I have one and will use it!

[@Scratchingforcash]

I’m using my OSHA approved shirt pulled up over the mouth & nose respirator.

[@symone9301]

Thanks! The information your husband was able to provide was very helpful. I know you have to sand in between with a 220 for cabinets but the information with the tub was helpful. I'm going to start with my shower first and then do the other bathroom tile and tub.

[@AliciaLynnYT]

I'm glad the information was helpful!

[@Lucy-h7x1g]

Thanks for the information,i might do my own home ❤the only one who really explained well. Thanks again ❤

[@AliciaLynnYT]

You’re welcome 😊

[@michellescozyhome6290]

Hi, Alicia! The end result looked great. I almost did something like this in our last house. But, then we moved so it saved me the trouble.😁 That is great that the customer service was so helpful. Once you started talking about the smell, I was out on every trying it. I have to be very careful with smells. It can set my migraines off so easily. Thank you for this wonderful share. This was very informative. I hope you are feeling better after applying that stuff on. Happy Tuesday my sweet friend. Many blessings to you. Have a beautiful day sweetie. Hugs! 🥰❤️❤️🌻🌻

[@AliciaLynnYT]

Hi Michelle! I am so happy with how this turned out. This is a guest/my son's bath so I was happy to just do this facelift and not have to replace the entire shower! The smell was really bad though and it gave me a headache so I can't imagine using it if you are prone to migraines! It took me a couple of days to feel better but I am now, thanks! I hope you are having a great week, sweet friend, hugs🤗💕🥰

[@jennbenninghoff1143]

THANK YOU! THANK YOU! This video helped me so greatly! Using the same product and have had the same issues. You just saved me so much time! I wasn’t sure how to proceed. Covering a hideous brown bathtub and surround and two coats we’re definitely not enough. Same problem with it being very thin. Now I know exactly what to do!

[@AliciaLynnYT]

Glad it helped!

[@jeanniewatson6820]

It looks beautiful!

[@MAGAMAN]

To improve the look, do a few more coats, then wet sand with working your way up through the grits using a wet/dry sandpaper. Finally buff it out using a rubbing compound and you should be able to get a very nice final finish without the roller marks.

[@AliciaLynnYT]

I can see how that would help! Thanks for watching!

[@nanaymalosvlogmaryrose9899]

Oh that's look amazing and very clean to .. thank you guys for your sharing

[@AliciaLynnYT]

Thanks! We are really happy with how it turned out! Thanks for watching!

[@kinglouie724]

With my experience with these kits and 2 part epoxies in general if you put the product on as thick as possible without runs or sags it will do exactly what the box says and will self level perfectly

[@avantsautomotive6022]

I ma doing the same thing this weekend and am having the same issues you did. I will buy more tomorrow and let it sit at least 24 hours o more and do a light sand before the third and 4th coats. Thank you for your research !

[@AliciaLynnYT]

No problem! Hope yours turns out great!

[@avantsautomotive6022]

I think it will i AM HAPPY SO FAR JUST NEED TO COVER BETTER. TK U @@AliciaLynnYT

[@dannaandstevenbuerger8081]

Great video!! Thank you. I am going to try it tomorrow!

[@michelleweatherspoon8087]

Thank you for making this video, it was very helpful to me.

[@AliciaLynnYT]

Glad it was helpful! Thanks for watching!

[@GlamQueenDIY]

Great job Alicia... I did mines also. I didn't use the kit I just purchased Rustoleum Paint..... It did take shot if work... Your end results was so pretty...

[@AliciaLynnYT]

Thank you, we are really happy with it so far!

[@zestygirl]

Thank you for sharing this information with me. This is very important, and i will be definitely getting onto this.

[@AliciaLynnYT]

Glad it was helpful!

[@ABitefLife]

It turned out great! This sounds like a much better idea then tearing the shower and tub out. It does look like it’s brand new. Yeah those fumes are super strong on Rustoleum products. I remember that from my dad using their products when I was growing up. At least the company was honest with you and helpful when you called them. I hate when you can’t get a hold of anyone at a company for questions. Let us know how it holds up after a year of use! Like 29 🌟

[@AliciaLynnYT]

Hi Ryan, it did turn out pretty nice! The fumes about took me out though! Lol The company was great though so that was nice and the results were great! I will definitely do an update, I'm crossing my fingers it holds up as well as it looks🤞 Thanks for watching, hope your week is going well!

[@GlamQueenDIY]

And I will try that kit on my nephews bathtub... 💜💜💜💜

[@AliciaLynnYT]

I hope it works well for you too, thanks for watching!

[@sagecreates470]

Thank you so much for sharing your info on this product, so helpful for me!!

[@AliciaLynnYT]

I'm glad it was helpful!

[@gloriousmediocrity985]

Jarrett toes! But seriously you read my mind. I've been doing research on this to do both of the bathrooms. It looks great. Can't wait to see it with the shower curtain up.

[@AliciaLynnYT]

I am loving how it turned out and it is going to look great with the shower curtain!😁

[@gloriousmediocrity985]

@@AliciaLynnYT Keep me updated on how it the rustoleum treatment lasts.

[@KimchiAndBeansVideos]

This is good information guys. That sucks that you had to do multiple coats and sand the surface, but glad that the company was responsive and gave you a refund. It is, however, looking very good. We've been wanting to do the same with ours.

[@AliciaLynnYT]

It did suck that we had to do multiple coats but the company was great and so was the result so it was worth it! Now to see how it holds up!

[@toddhubbard1991]

Just realized this is a thing!!! I'm glad I did before I started to cut out our tub. Our tub is exactly like yours. I just ordered two kits from amazon and will start this next week. I am curious if anyone has tried it with a sprayer?? Thanks again to you and your husband for a very informative video!!

[@AliciaLynnYT]

We are really happy with it so far, I just uploaded a 6 month update on it! I hope you are as happy with your outcome and I would be curious to know about trying it with a sprayer too. Thanks for watching, Todd!

[@toddhubbard1991]

Just finished painting our’s!! Not perfect but not bad either! Took two kits to complete.

[@Sunshine-bh8ki]

My daughter has a bathroom that need updating to much money to rip that tub like ur so this help a lot thank u I have save ur video and share it with my daughter.

[@AliciaLynnYT]

I'm glad it helped, thanks for watching!

[@laxmibhat2730]

Is their different colour

[@nlewis-calloway6192]

Thank you so much. Very informative.

[@AliciaLynnYT]

You are so welcome!

[@Scratchingforcash]

Getting ready to do mine! Great video by the way, very informative!! Thanks for sharing and your bathroom turned out great!!

[@AliciaLynnYT]

Thanks for watching and I hope you enjoy yours as much as we do ours!

[@Scratchingforcash]

@@AliciaLynnYT how long do you expect this transformation to last? 5 years maybe?

[@AliciaLynnYT]

@@Scratchingforcash I'm hoping to get about that out of it, yes.

[@adamromano89]

Great video Thank you!

[@MsHunne62]

Thanks for doing this video it should help me a lot.

[@AliciaLynnYT]

No problem! Thanks for watching!

[@haroldharris7080]

Good job guys

[@AliciaLynnYT]

Thank you!

[@crystalkardulis9182]

I know it may sound crazy however I would suggest send it down again and do another two coats that means buying another kit that way you won't see the imperfections and hopefully it'll last a little bit longer but it does look beautiful thank you for sharing that information because I'm looking into using the Rust-Oleum kit also for my rental and I'm really nervous about doing that thank you so much for sharing and good luck to you looking forward to a future video how it held up maybe a year later or six months later much love and peace to you and your family and thanks again for sharing ❣️

[@AliciaLynnYT]

Hi Crystal, I had thought about doing more coats but decided it looked good enough because I was tired of dealing with the fumes! It would probably look better the more coats you do but I'm pretty happy with the results and so far it is holding up great! I will definitely do an update video on it around 6 months or so. Thanks for watching and have a great weekend!

[@christinamorman7220]

Very thorough instructions, thank you ♥

[@AliciaLynnYT]

You are so welcome, Christina!

[@mvppainters911]

Thanks for taking the time and effort to create and share your thoughts on the process! How has it held up after 2 years?

[@AliciaLynnYT]

It has held up great, I definitely am glad we did it!

[@mvppainters911]

@@AliciaLynnYT Thank you? :)

[@Thesmallerhalf]

Great video Alicia!! You did a really good job explaining all the prep that is involved!! Turned out great!

[@AliciaLynnYT]

Thanks! I love how it turned out, now I just hope it holds up!🤞

[@sivyeshimunova4338]

I will try and than i will live my feedback. Thank you.

[@AliciaLynnYT]

Please do!

[@holylabs]

Hi. Thanks for all the info. Seen this video was done about a year ago. How is everything holding up?

[@AliciaLynnYT]

It's still holding up great!

[@daniellehenderson28]

Great job. Is it holding up well?

[@AliciaLynnYT]

We moved about 6 months ago, but it held up great for the 2 plus years that we were there!

[@eligiendomidestinoenmoto]

Hola como estas? Felicitaciones y gracias por compartir el video y los tips! Consulta tema globos, poros, al aplicar se disolvieron o autonivelaron? En nuestro caso lo aplicamos y no, quedaron las micro burbujas, puntos o poros. Coincidimos en 3 o mas manos. Y consulta extra, como resultó en el tiempo?

[@suvallejo]

Amazing video!!! I loved it! thank you for sharing this experience with us!

[@AliciaLynnYT]

Glad you enjoyed it, thanks for watching!

[@ireneou8228]

Thank you for the video! I used the Rust-Oleum spray paint on my sink, but unfortunately, it failed as the finishing texture feels gritty like sandpaper. I'm seeking an alternative solution. Could you please let me know if this paint provides a smooth finish? Thank you!

[@AliciaLynnYT]

It is smooth, yes!

[@ireneou8228]

@@AliciaLynnYT Thank you!

[@thegraylatte1638]

Wow I didn't know they sold something like this, you done so well showing all the steps, anxious to see your update on how it held up! This would be a lot cheaper than replacing with a new tub! Great you got a refund, it's too bad they didn't put that on the instructions like you husband said, looks great after 4 coats, it does look brand new! Great job & thank you for sharing! Xx Karen

[@AliciaLynnYT]

Hi Karen! We were really impressed with how well this turned out, even if it did take 4 coats! It is definitely a lot cheaper and less work than replacing it with a new tub! Fingers crossed it holds up🤞Thanks for watching and Happy Monday!💕

[@tresadrienne8724]

Once the paint is mixed, can you use it later? I am wanting to paint a bathroom sink and will probably have some leftover and would like to paint a tub too. What did you clean the roller and brushes with?

[@AliciaLynnYT]

The paint has to be used within 6 hours of mixing. I kept my roller in a ziplock bag in the fridge between coats then threw it away after I was done with the project.

[@meirenoya2833]

Great video. Could you tell me how to clean a bathtub so that the paint doesn't come off? Grateful.

[@AliciaLynnYT]

Stay away from anything abrasive, like comet. I used Dawn dish soap and water and a soft sponge. It worked great.

[@meirenoya2833]

Thanks. You're very attention. ❤

[@lorenjennings1127]

Well done video with lots of good tips and insight. I'm curious as to how well this epoxy paint self levels. Is it smooth or does it show some roller and brush evidence? Thank you!

[@AliciaLynnYT]

It does have some self leveling properties to it, so it does do a decent job of self leveling. That being said, the roller did produce the best result as far as not showing marks. I did notice a little bit of brush marks where I had to use a brush. Thanks for watching, Loren!

[@gracebyseven]

Hi, thanks for the video. Also be sure to mix it thoroughly. As a professional painter, we often think we have, but we then go in further as the catalyst, if not mixed absolutely through, will lead to some of the issues you had. God bless.

[@AliciaLynnYT]

Great tip! Thanks and God bless.

[@Redjools78]

We used a similar kit from a different brand...it turned out nice, but WOW, THE FUMES. I was worried for a bit that I had Covid because it knocked my smell all out of whack!

[@AliciaLynnYT]

They fumes were so bad on this, it sounds like the kit you used had the same issue. I didn't lose my sense of smell afterwards but I sure didn't feel very well! Hopefully it was worth it and this lasts! Thanks for watching, Julie!

[@Nathan-wf1pr]

@@AliciaLynnYT get a real respirator, not a dust mask. 25$ on amazon, paint respirator, many uses, 6200 filter for example, huge huge huge difference vs not wearing one or wearing a dust mask, you will love it I promise. You can get them at most hardware stores, too. 3m is a common brand.

[@AliciaLynnYT]

@@Nathan-wf1pr I totally agree, Nathan, you need a real respirator for this stuff!! I definitely should have used something like that and it would have helped a lot!

[@johnmatarazzo276]

I started this product and finished my first 2 coats. Its been a few days now with multiple fans going. And the fumes are still very strong. How long does it take to ease up? I mean WOW. This is some strong stuff.

[@AliciaLynnYT]

It was probably around a week for ours to let up, that stuff has some seriously strong fumes!

[@isabellavision]

I am not surprised it's strong smelling-- when dry it's expected to hold up to years of daily baths/showers, regular cleaning, etc. My question is whether -after it's dry and looking great- whether there is something you can put on like a 'clear coat' or a wax product like they put on school floors and strip off/reapply every summer. If I could protect this new finish and then only have to re-wax every few years, that would be great. @AliciaLynn I am looking forward to your six-month update, must be about due anytime??

[@AliciaLynnYT]

@@isabellavision great question about a protective finish, I haven't come across anything like that myself in researching the product but that would be nice! Yes, I will do an update on this soon!

[@RockyTuxedoFBI]

Excellent video. I don't think I am capable of taking off the spout. I am renting and if I mess it up.. well. Do you think with a brush it would work if taped really well around that area? I am also not the best at painting. Thanks in advance. Loved how it turned out. Take care.

[@AliciaLynnYT]

You could definitely just tape off the spout and it should work fine!

[@2fat2furious1]

Ok that was a lot to get to the final result but all in all it was worth it because it looks really good.

[@AliciaLynnYT]

It was a lot of prep work for sure! We are loving the results though! Thanks for watching and Happy Monday!

[@MAGAMAN]

Even if you end up spending a few hundred dollars on this stuff to do multiple coats, it's still going to be better than buying a new tub, considering everything is garbage made in china these days. In fact, when renovating it might be best to buy a real cast iron tub and refinish it with this product. Using a sprayer will get you the best finish if you know what you are doing and have the right equipment.

[@stephanieL]

Great video! I had no idea they sold kits like that. Love the end result!💜

[@AliciaLynnYT]

I was really impressed with how well this turned out. I am curious to see how well it lasts now!

[@mannycontreras5266]

Alicia how much was each box worth. I'm going to do my tub cause I liked the end result. And thanks for explaining the 1hour waiting time between 1and 2coat and then wait 24 before applying 3coats and an additional 1hour between coats 3and 4. Greatly appreciate your time to explain to us the viewer in detail down to the pin on the diy.

[@AliciaLynnYT]

Hi Manny, I'm not sure if you mean cost or how many coats so I will give you both. The kits cost just under $30 each and we used 2 kits total for the tub and shower. It was a great transformation for $60! Thanks so much for watching!

[@mannycontreras5266]

Alicia you just answered my question. 30dollars per box. I will be only doing the bottom part of tub and that box covers 2 coats to be precise. Ofcoarse all these info I was aware because of ur testimony. Which you and ur husband the best mrs. Alicia.

[@dianep3162]

Thinking of doing this, love your final result. but just curious. I've watched another video of the process and he mentioned not rinsing after sanding only use the tack cloth to remove the dust from sanding. Could that be why you didn't get the results you were hoping for after your first and second coat. I know the box directions say rinse but I see you didn't mention rinse when you sanded again before your third coat and liked the result better. Could you please let me know your opinion I would love to avoid extra sanding and coating if I can.

[@AliciaLynnYT]

Hi Diane, I personally think rinsing the surface that first time is really important to get the surface as clean as possible and therefore ready to take the product better. The less debris on the surface, the better the adherence of the paint. Rinsing the surface does the best job of that. I would have rinsed each time between coats if I could, but the paint has to cure before having water on it. Plus, I am just a stickler for following the instructions, I guess. Lol I have seen people on here do some interesting things with this product that I am sure Rustoleum would not recommend for best, long term results. I think if you follow Rustoleum's instructions, the product works great! I honestly just think the first box we used was defective in some way. I definitely noticed a difference in the two in what they looked like and how they applied. I have a feeling that first box got frozen or something and it compromised it. I hope that helps!

[@gavinfoster9118]

What is the mix ratio of activator to the paint? Sometimes you only want to paint a small area and use the product again!

[@AliciaLynnYT]

These are kits that are designed for a one time use. There are no instructions for using only a small amount and therefore, no ratio...

[@jujubean11]

Hi there! I need to refinish my bathtub because the paint on the bottom of the tub is peeling off. Do you recommend to sand down the tub before painting and if so, which type/grit of sand paper would be best? Also, can I just paint the bottom of the tub, which is where the peeling is or do I need to paint the entire tub, including the outside of the tub. I'd assume I'd have to paint the entire tub because it wouldn't match if I only did the bottom? I've never done this before so please excuse me for the dumb questions. I'd like to do this myself since I don't want my landlord complaining about the peeling paint. Thank you for the helpful video! Looking forward to your reply.

[@AliciaLynnYT]

That sounds like the bottom would have to be completely stripped of paint first. Either by sanding or something else, like a chemical. And yes, you would want to do the whole tub so it matched. I'm not a professional and I didn't deal with peeling paint myself so I really don't know the best way to prep that. It depends on things like what your tub is made of etc. Rustoleum is really helpful when it comes to questions on the use of this product, I would recommend asking them what they would suggest.

[@MMS98765]

How has this product held up over time? Any flaking?

[@AliciaLynnYT]

We sold the house, but it held up great for the 2 plus years that we were there!

[@teaglet]

Could you use a spray gun when applying the final coats?

[@AliciaLynnYT]

You probably could but I would think it would be a pain to clean that epoxy out of a spray gun after!

[@isafrongia7259]

One more question pls... Does this product harden after the 6 hrs time frame. ? I read from a previous video that it is necessary to use it up within that time frame. If so, is it possible to mix only half and proceed with the other half, hence the second coat, on the following day? Pls let me know

[@AliciaLynnYT]

The product does start to harden after 6 hours because of the chemical reaction. Technically you could mix only half at a time, but the problem with that would be getting exactly half of each. One other thing to consider is that once it has been opened, I don't know whether or not the exposure to air affects it.

[@isafrongia7259]

Alicia. ​@@AliciaLynnYT

[@isafrongia7259]

I am grateful for your prompt response to my question earlier on. I will try, yes! I.ll take that step and divide the product in 2. I.ll b meticulous😊 .... I may change my mind at the time of this grand make over, we.ll c then. Thanku so much 4 yr helpful time. 💋

[@sultana7411]

Hello , I’m curious how your tub is holding up … any peeling or yellowing ?

[@AliciaLynnYT]

We sold the house, but it held up great for the 2 plus years that we were there! No peeling or yellowing.

[@Bridget82267]

question about the new cans the (3rd application) was the paint thicker?

[@AliciaLynnYT]

Yes, it was a little bit. It seemed to apply nicer too.

[@dinhchieunguyen684]

hi, did you have to rinse the roller between coats?

[@AliciaLynnYT]

I just put it in a ziplock bag in the fridge. It keeps rollers and brushes fresh between coats of paint!

[@caylarichey8184]

Did the roller you used shed? If not, could you link it?!

[@AliciaLynnYT]

They didn't shed, no. I got mine at Lowes www.lowes.com/pd/WHIZZ-Bath-and-Kitchen-2-Pack-4-in-x-1-4-in-Mini-Woven-Velour-Paint-Roller-Cover/3033707

[@edenrickett4976]

How many boxes total did it take? I have this exact old tub.

[@AliciaLynnYT]

2

[@niasayamuongbo6498]

I 💕 the video.so Amazing 🤩

[@AliciaLynnYT]

Thank you 🤗

[@JamesSmith-gk8sz]

A few notes for people who don't have the near perfect set up, time allotment, and resources that the folks in this video do: 1.) If your bathroom doesn't have an overhead fan, you *must* bring one in, add an air purifier, bring an air mover...something. The fumes from this product are as pungent as they are acrid and eye watering. Highly recommend using a breathing respirator as well with dual filtering cartridges. 2.) The prep side of this video is a must. The bleach, the sanding, the mildew remover, the scouring powder...it does make the difference between a wrinkle free finish and one with bumps and bruises. 3.) You don't need to remove all the fixtures to get a "close enough" covering. If this is for a client, ask them if that's what they want. Many people add a lining of water proof epoxy to the handle, faucet, shower head faucet to keep water from dripping into the walls. Just assuming you can yank it might cause serious damage and not even be what's needed. Just use standard painter's tape. 4.) For most people who have an already white bathtub, you don't need the rather extreme amount of coating shown in this video. I managed a single coat for an entire bathtub and shower enclosure just fine and it hid the majority of the peeled off spaces. If you have a tan or off white enclosure, you'll need to buy the larger volume refinishing package. 5.) If you're not experienced in using a paint roller with roller brush and are aware of your body's proximity to freshly applied epoxy, just spend the money to get "painting overalls" trying to bend and stand and kneel at all these odd angles to coat your bathtub, if you're a newbie, will inevitably lead to it contacting your clothes, shoes, skin, etc. Just get the overalls and gloves and you'll be happy. 6.) *If you don't have a free 2-3 hours to prep, tape, and apply this product, don't even bother. Once you start using said product, you *cannot* stop as it begins degrading in performance, becoming totally inert at 6 hours. You want to apply this as soon as you mix the two compounds together to get the best adhesion and finish.

[@sanduskyohiobro]

How has it held up

[@AliciaLynnYT]

great!

[@4637bigred]

Did you clean your roller in between the first and second coat ?

[@AliciaLynnYT]

No. I wrapped it in plastic and put it in the fridge. No reason to clean it when you are going to use it again so shortly.

[@L0ngstrip]

The trick is to apply thick coats. Don't brush or roll on it too hard after application. EG, first few rolls for coverage, then give it a last one or two light rolls to remain thick in each area. If you do that with the two separate coats, the last one should not be see-through.

[@jacksonstorm781]

Do you need to do a primer? And will it go in a spray gun ok? Or does it need to be thinned?

[@AliciaLynnYT]

No need for a primer, just do the prep steps in the instructions. As for a spray gun, I can't say since I've never tried it. I can see that working, though.

[@VincentStevenson]

How many cans did you go through to paint this whole tub with all the coats? Thanks

[@AliciaLynnYT]

2

[@christolpolson7369]

Did you sand between the second and third coat only or did you you sand after the third coat as well?

[@AliciaLynnYT]

Hi Christol, I sanded before the 1st coat and between the second and third. Nothing after.

[@tammythomas6679]

I am just wondering how the product held up over the months with cleaning and use. Thanks.

[@AliciaLynnYT]

I will be doing an update video on it soon!

[@meagandavis1790]

@@AliciaLynnYT hey did you do the update yet?

[@ms.shunte8323]

How long did it take to totally dry? How long did you wait before showering?

[@AliciaLynnYT]

It was dry after a couple hours but you are supposed to wait three days before getting any water on it or using it for showering.

[@ms.shunte8323]

@@AliciaLynnYT thank you

[@briandmillo1726]

How did it hold up after a year?

[@AliciaLynnYT]

It still looks great!

[@briandmillo1726]

Thanks Alicia. You're the bomb.

[@briandmillo1726]

Just curious. What state are you in? I ask because I'm an old contractor that has been in the business for 40 years and do repairs daily and was curious about doing what you do.

[@wulfclaw4921]

My question is can color be added to this system ?

[@AliciaLynnYT]

I don't know if that would affect it but it does come in other colors besides white.

[@yubi4291]

Good that you could do the job for free, good tactic to reach out to Rustoleum!

[@AliciaLynnYT]

We ended up buying an second box to finish the project so it wasn't free, but I think it was nice of Rustoleum to refund us for the first box. It is great when a company backs up their product.

[@auldzbuzz3374]

Before you do the third coat, you mentioned that you sanded it, what did you do after sanding it? How did you deal with the dust?

[@AliciaLynnYT]

I washed it off with water then took a tack cloth to it.

[@auldzbuzz3374]

@@AliciaLynnYT A ok. So water won't affect the stability of the material. I was thinking that it's a no-no to have it exposed before fully cured.

[@AliciaLynnYT]

@@auldzbuzz3374 I did the 3rd coat a couple of days after the 2nd so the paint had time to fully cure and was ready to get water on it.

[@auldzbuzz3374]

@@AliciaLynnYT that makes sense. Now the confusion is all cleared up. Thanks for the info.

[@AliciaLynnYT]

@@auldzbuzz3374 no problem!

[@colebyrnes7889]

Good video, very informational. Personally, I don't like products like this because after the cost of materials and tools needed, you are spending almost as much as tiling the shower yourself, which should take less time from backer to grout if you are at all handy. Anyway, just my two cents. Good video for the product though!

[@billyhawn]

Isn’t it that it covers 2 coats on a “standard tub”? Not a tub AND the walls. I would think that you would need a kit for each, the wall and the tub. Am I wrong?

[@AliciaLynnYT]

It should only cover 2 coats on a standard tub and walls but we got 2 coats. As I said in the video though, I think the paint was thinner than it was supposed to be.

[@VaraVannerSimpleLiving]

Very cool project Alicia; I don't think I would have the patience for that lol. How much did the paint cost? #FWBL

[@AliciaLynnYT]

Hi Vara! I am just glad it turned out so well and at the end of the day it was a lot less work than replacing it would be! Much cheaper too, each kit was $23.70 and it took two! Thanks as always for watching, my friend!💛

[@VaraVannerSimpleLiving]

@@AliciaLynnYT Dang that is a good deal and less work for sure!

[@Vita5772]

I just painted yesterday and my tub is shiny on some parts and mate on the bottom....what did I do wrong? Do I have to buy another kit and paint one more coat? Or do I have to strip everything again and redo? 😢 please someone help! Has this happened to anyone?

[@AliciaLynnYT]

I would recommend calling rustoleum customer service. We did when we had an issue and they were very helpful.

[@rage964]

I don’t think I’ve seen anyone get away with two coats. I’m about to try so we’ll see how this goes 😅

[@rage964]

So just finished my tile shower and tub and two coats (two boxes) was more than enough. I think you guys just had some bad product. Sorry you had to do three coats cause my gosh this stuff stinks 😂😂 great video and information though!

[@meghaarts420]

10 👍🏻 like Nice video👌👌👌👌

[@AliciaLynnYT]

Thanks for watching!

[@nms1508]

Any updates on longevity??

[@AliciaLynnYT]

I did a follow up video, link is pinned at top of comments.

[@nms1508]

@@AliciaLynnYT thank you!

[@ericasprunger399]

Did you rinse after sanding?

[@AliciaLynnYT]

6:01

[@ericasprunger399]

@@AliciaLynnYT thank you! Sorry, I must have missed that!

[@AliciaLynnYT]

@@ericasprunger399 no problem!

[@SheilaSpencer1]

@@AliciaLynnYT I thought she meant before the 3rd coat; that was the question I had; and you answered it on a different comment. Thanks!

[@AliciaLynnYT]

@@SheilaSpencer1 I think you're right!

[@nms1508]

Did the bubbles go away? Are there any roller marks?

[@AliciaLynnYT]

The bubbles do go away and the only marks I have are from the brush that I had to use in corners or other places I couldn't get the roller.

[@tc12345]

How long did the odor last until it went away completely? I used the Rustoleum spray epoxy on my countertops and its been 4 days with the bath vent on and it still smells awful. Debating if I want to do the shower or not. Its toxic!

[@AliciaLynnYT]

It was a good 2-3 days with the window fan going constantly. I definitely didn't like the fumes or how bad they probably are to breath in! But it is holding up great so far so I would probably do it again myself. Thanks for watching!

[@tc12345]

@@AliciaLynnYT Sadly there is no window in the bath either so Im very concerned. Thank you for the feedback!!

[@AliciaLynnYT]

@@tc12345 I don't blame you, that stuff is strong! You're welcome!

[@longshorejlepper2582]

I am not planning on doing this now, I will check the prices on new enclosures.

[@AliciaLynnYT]

The price and work involved in the demo of the old and installation of a new insert is what lead us to this option...I'm glad we went with this. Much less work and cost.

[@dallas_biscuits]

How many coats did the cans give you?

[@AliciaLynnYT]

2, per kit.

[@markbaugh4402]

It doesn't sound right that initial sanding was wet 600 grit and 3 coat was 220. I would think the heavier scratches would be needed on old finish rather than 3rd coat???

[@AliciaLynnYT]

The 600 was just to do a light surface sand to prep it for the paint. The tub is fiberglass so you don't want to do a heavy sand on it. 220 is common to use between coats of actual paint that need a little heavier sand than the fiberglass. Also, when it comes to what sand paper we used, and when, we followed specific instructions directly from Rustoleum themselves. It worked great!

[@teresabattien8734]

A LOT of work, but a beautiful result!

[@AliciaLynnYT]

Yes it was! But definitely worth it if it holds up!

[@niasayamuongbo6498]

Beautiful is work

[@darlenedobson7060]

Go Cougs!

[@AliciaLynnYT]

Yes!!!

[@billphil8235]

Thats a cigar roller, not a brush. Are you happy with the outcome?

[@AliciaLynnYT]

We were very happy with the outcome and it was still holding up well when we moved!

[@cindycyr4272]

Is this an epoxy product?

[@AliciaLynnYT]

Yes

[@abcjerilee]

WSU! Go Cougs!

[@AliciaLynnYT]

Go Cougs!! I miss hearing that now that I live on the other side of the country! Lol

[@yewonday]

nice video my new friend and like 23

[@AliciaLynnYT]

Thanks for stopping by!

[@geostrong3606]

U didn't sanddown b4 u put a coat on that's ur concerns

[@AliciaLynnYT]

5:48

[@Tlu2000]

It seems to me, that a primer should had came with that kit