DID IT LAST?! We painted our TUB with MARINE PAINT **UPDATE** | Fiberglass Surround

[@DIYPowerCouple]

😀You can click the link to see 👀 how we painted our fiberglass tub with marine paint kzbin.info/www/bejne/eqTChJ2rZbKheLc Remember to LIKE and SUBSCRIBE!

[@rhonyvette]

Thank you!

[@zayover193]

Did the paint have a smell or dangerous odor I will appreciate some information ℹ️ please thanks 🙏 dyi ers.

[@bumblebee5271]

Thanks I did but mine is not fiberglass. 👍 Don't worry you got my view 🤣🤣🤣

[@ivanobar1]

Was yours cast iron. What did you use. I’m researching for my cast iron tub.

[@wadebrewer7212]

I want to do this....not because I like the idea....but because I am lazy and seems easier than replacing the whole surround just for the kids to destroy it (because that seems to be children's purpose in life....wear out snd destroy the things you have worked for). Thanks for sharing with us short cutters!

[@AndyMarr29]

I love the 2 year update video - it provides a lot of confidence in knowing it will be worthwhile!

[@DIYPowerCouple]

You can do it, Andy!!!

[@consciouswriter6531]

How adorable are YOU two?! If my husband and I had worked together as well as the two of you, we might not have ended up divorced. Lol! Thank you for this inspirational video. I'm glamping an old RV and the shower is horrid! So your sharing your experience is greatly appreciated.

[@DIYPowerCouple]

ConsciousWriter, we are so happy that you were inspired by this video. Choosing to fix up your shower will make it look "BETTER THAN BEFORE." That's how we feel when we do each of our projects. Please let us know how your RV turns out. You can also put up peel and stick flooring and backsplash to totally change up the look. Wishing you the best! -DIYPC 😃

[@sonmydful]

one thing id like to mention with the paint is that since it is oil based you can easily thin this using mineral spirits or an actual paint thinner, start ina small pint container and add a few drops of your thinner. mix until you have almost a silk like consistency and apply. Not only will it leave a nicer finish (imo), this makes the paint much easier to roll, stretches your product further so you get more out of a can (coverage) and does a better job hiding streaks when applied with a brush.

[@DIYPowerCouple]

Thanks for the tip 👍🏾

[@sonmydful]

@@DIYPowerCouple appreciate your video! Thank you

[@nicholem4831]

@@sonmydful ⁠​⁠I’m not disagreeing with you, but I read on another post pertaining specifically to this product that upon thinning it out with a bit of paint thinner, they experienced dry times triple that of when the product was applied as is. Is your suggestion to thin based off personal use of THIS specific product, or similar products in general? Are you aware of why this may be, or have you experienced increased dry times upon (lightly) thinning out oil based paints?

[@1Seriouslyserious]

You both have the most beautiful smiles!! ❤

[@DIYPowerCouple]

Thank you, Janet. 😀😊

[@RB-gt8bf]

Thank you! I stumbled across your fiberglass tub surround videos a few months ago. I told my painter about your ideas and he concurred. He normally used the kits from home depot. But today after putting on the final coat of marine paint he said this was better. He followed your suggestions. First he did the marine primer and let it dry for over 24 hours. Then applied the marine top coat. He liked the finish better. He will return in 3 days just to check and make sure the cure is good. Thank you again for your videos regarding this project!

[@frankreyna9281]

Thank You both, for your videos I prep my fiberglass tub and shower by cleaning and sanding and today I applied a coat of Topside Primer and it already looks like new in two days I will apply my top coat and can’t wait to see the outcome, I’ve watched many videos and decided to go with the Topside Marine Paint, I want to thank you both for encouraging me to go with this brand. AWESOME 👏

[@DIYPowerCouple]

Hi Frank! 😀 Glad you are seeing results after priming! You will love the final look!

[@tammyborders101]

Did the paint itself have strong fumes? They mentioned the primer did, but I’m curious about the paint.

[@TocAbOcaStarr87]

Hi guys! My sister works on yachts in south florida and about 5 years ago she also painted it with marine paint! It's the best thing she ever did! It lasted 5 years until she recently remodeled and she got a new tub! I do believe that she did a top coat once more after that. Geniuses to post this, it really really does work!! If anyone is curious and you need a quick update and trying to save some money, do it! But follow the directions just like you guys did so you get a good end result! 😊❤

[@DIYPowerCouple]

Hi Tiana! Thanks for sharing that story! 😃 It's definitely a process but works so well!!

[@thewhitefamily4020]

Just watched the original video. It's good to know how it's holding up. You two are so cute!!

[@DIYPowerCouple]

Great thing is that it has never cracked or flaked. It has faded a little over time, but that is to be expected. This is the kid's bathroom. We'll show how to restore it again. It's been several years now.

[@Blessings-b2x]

What a beautiful couple.

[@DIYPowerCouple]

Thank you. You're very kind.

[@visionray.]

I had the idea of doing this a few years ago! I’m so glad you guys put it to the test! I’m a professional painter , I’m thinking about using my spray rig for my application. I’ll record it and send you all the link!

[@DIYPowerCouple]

Please do...we'd love to see it done with a sprayer. That will be a nice video!!!!

[@robertmccully2792]

Nice to see a lovely couple working together to fix there home and save money doing it.

[@dannylaw7367]

Just wonderful nice articulate great people giving people some good info on saving money and still getting quality work.

[@DIYPowerCouple]

Much appreciated, Danny! Much appreciated 😊. DIYPC ✨

[@JESUSHELPUSHEisLORD]

Thank you for your time and sharing. You guys are so beautiful couple!

[@DIYPowerCouple]

Thank you so much!🤗

[@chordconfidence2392]

You guys are so incredibly engaged, and you communicate expertly (but you keep it very down to earth). You cover the information very adequately, and it's obvious that you did your research - to give the most info for your viewers. You look like you are very close to each other. I see the unity - beautiful - and I thank God for that!! Great, great video (s) [you have to watch the first one too!!] ------ 5 STARS!!

[@DIYPowerCouple]

Thank you for your very kind words, Chord Confidence! We appreciate the positive feedback. 🤗

[@powellpatterson4928]

Thx for the follow up.

[@renaelindstrom6791]

Great video. A friend of mine also recovered her chairs in marine fabric. She has pets and her furniture took a beating. You can literally wash with a hose or in the bathroom. Still looks great.

[@DIYPowerCouple]

That is awesome! Thanks for sharing!!!

[@plantedscorpio]

New subscriber! Single mom of two (and a teacher) needing to redo my bathroom. This will literally save me hundreds of dollars!!! Thank you so much!

[@DIYPowerCouple]

Welcome to the DIYPC Family Planted Scorpio! 🤗 Glad we can help you save some $$$.

[@RandyWade-ry8yc]

Awesome video. Well done with great and to the point info. Thank you very much.

[@DIYPowerCouple]

You're welcome, Randy. Thanks for watching our video...we appreciate it.

[@berserkerusmc7613]

Absolutely brilliant idea to use marine paint.

[@DIYPowerCouple]

Many thanks. We put 2 and 2 together. Fiberglass boats use fiberglass paint and we have a fiberglass tub 🛁. We're glad that you received something from our video! Hope to talk again soon. DIYPC ✨

[@berserkerusmc7613]

@@DIYPowerCouple Tub os metal, but the surround os fiberglass. Either way, I'm heading to Home Depot in the next week to get the paint you guys used. Thank you very much for taking the time to produce your diy tutorials.. I greatly appreciate it.

[@laurag3469]

Thank you so much for the update!

[@bobbyGnOly]

you two are awesome....so cute...and so smart...and such a great explanation for a novice like me...thanks

[@DIYPowerCouple]

Thank you soooo much. You are the reason why we do what we do!!!! Best -DIYPC 😃✨

[@thecaelireese]

Thank you guys so much for your videos! To a newly wed-first time home owner, you guys are amazing!!

[@DIYPowerCouple]

Thank you, Caeli. We're sooo glad that you are able to get value from our videos. We're always here if you have questions. Be encouraged...YOU CAN DIY TOO! -DIYPC 😃✨

[@joleneskuse7355]

U r adorable and ambitious and I'm doing my tub now, thank u for help this single lady.

[@brigitterice2007]

So creative! I was just wondering how my boats paint would work on the bathroom cheap plastic tile boards ! So grear to see a power team thinking outside the box!

[@Miriboheme]

this is such an amazing idea! i'm so pleased that i can make this change and not have to spend a fortune. thank you guys so much. akilah, your voice is beautiful.

[@Dumppump]

Marine paint idea was genius!

[@DIYPowerCouple]

Thank you, Colm 🤯. -DIYPC 😃✨

[@Bald2INFINITY]

Your review and opinion were just what I needed to hear needed a cost effective solution for a fiber glass shower stall renovation👍💥👍💥... Thank you .

[@DIYPowerCouple]

Glad this helped you, Terese! 😃

[@Bald2INFINITY]

👍👍

[@cewisham]

These videos for resurfacing your tub were very helpful. thanks

[@DIYPowerCouple]

You're welcomed, thanks for watching!

[@spruillgirl1458]

By far the best video and just what I needed. So much information out there and I didn't want to waste my money. I'm going with this because I did the same with the polyurethane on my hardwood floors before--I used marine grade polyurethane and nothing is better than that on your hardwood floors. Because of the chemicals, I mioght forego the marine primer and see how it turns out. Thanks so much for this video!

[@DIYPowerCouple]

Thanks for watching. Please let us know how your project turns out. We think that forgoing the primer is ok, but the original color will show up again much faster.

[@monicaceraso2388]

You guys did a great job on this. I've read comments that the prep is important. Thank you for posting these videos.

[@texaswildflower7715]

I'm so excited to see this video!!!

[@DIYPowerCouple]

Thank you so much 😊!

[@wa13601]

LOVE the way you presented the information! You two are an adorable couple! Thank you SO much for the info!

[@DIYPowerCouple]

You're welcome 🤗🤗

[@dolospirit]

Thank you. Liked your Initial video and results. This helps a lot. The update sold me.

[@bobbarker5884]

Thank you guys so much!!!

[@FunLifeTransform]

Thank you for this video! I cannot afford to replace the tub and purchased the paint you recommended. It is my weekend plan.

[@DIYPowerCouple]

Please let us know how it works for you.

[@billst.1044]

I'm very impressed with the job you did. Thank you. I watched the original video and this one, and have several questions. I have a shower stall that needs to be repainted. I believe it's fiberglass, could be plastic not sure have to check it out. Anyway my questions are; 1 will this paint work on plastic? 2. Is it slippery when wet and if so can anything like sand be added to it to put on the base?

[@DIYPowerCouple]

Great questions: 1. We are 💯 percent sure it works on fiberglass and 0 percent sure that it works on plastic, but we are the kind of people who would try it anyway ( but that's us) 2. It is not slippery when wet. We let it cure for several days before using the tub.

[@billst.1044]

@DIYPowerCouple Thanks for the info. I found the enclosure is fiberglass, so I'm going to try what you did on it. More importantly, thanks for the feedback on "slippery when wet."

[@charityclark7910]

Excellent! I'm going to try this.

[@DIYPowerCouple]

Please let us know how it turns out for you. Others shared that they also had good success after seeing our video. 😊

[@aliwil8612]

You guys are my favorite DIY couple! Thanks for this update.

[@DIYPowerCouple]

Thanks Ali for your kind words! 😀

[@mr.mediabomber2358]

Just the information I needed. I would not have thought of using marine paint.

[@nowyouknow-fu9hc]

Thank you. I will try this I have pretty much the same beige Tub. Costs a lot less than a new tub to shower replacement project. ❤

[@DIYPowerCouple]

Yes, it costs much less🤑.

[@denniswiley8686]

Great video. I remodel homes, and I will be using this paint in the near future. I am doing a shower today, but the customer bought the refinishing kit. We shall see.

[@DIYPowerCouple]

Dennis, you will be pleasantly surprised with the results from the marine paint. Only thing is...if you use the primer, residents must be away from the home for a few days. It's very strong. Please stay in contact and let us know how it works for you. Best, DIYPC ✨

[@mickclark4647]

Very good-these reviews on the longevity of products and procedures are absolutely essential. Who wants to invest time, money and effort into all this without any sort of reassurance there will be a lasting result? Thank you!

[@heidismith6148]

Can this be used on ceramic tubs?

[@danielcmore5863]

Thanks for updating

[@O.C.Stiggs]

Excellent, very well presented video.

[@staceydickinson8021]

I have a 1980 manufactured home home and The guest bath shower tub combo is almond color but it's kind of textured it's not a smooth finish. I'm not quite sure if it's some type of just plastic or if it is fiberglass. If it's fiberglass and would it being textured do you think your process and products would work in this situation?

[@VictoriaGates]

This is awesome 👍 Thanks for the update.

[@forumicebreaker]

This is great to see updates and longer term results! Great presentation! I really enjoy the answers to questions and descriptions of the process work, very helpful!

[@DIYPowerCouple]

Thanks Forumicebreaker!

[@xjcrossx]

You guys are cute lol great job. I am rehabbing an apartment building. I was planning on getting all new showers. Mainly because they are hideous. I had a buddy recommend this process instead of replacing the showers and this video solidified that idea. I like you two and what you do. Keep it up and I will keep watching! Subbed.

[@DIYPowerCouple]

Appreciate you! Welcome to the DIYPC Family 🤗

[@francesreed28]

Hi, I really enjoyed your DIY, however my tub is porcelain that I painted 2018. I now have chips and peeling. Will this work for me Thanks in advance

[@SifuBang]

I did this 5 days ago thanks for the update you guys are great!

[@DIYPowerCouple]

Thank you very much!!!! 🤗

[@danielleday9856]

Absolutely genius!! Thank you so much for sharing!!

[@reidrepairs5837]

Thanks for this informative video. You have answered so many of the questions I've had. I feel much more prepared now to tackle a job I've been putting off for months. Thank you!

[@DIYPowerCouple]

You got this!👍🏾

[@TheBlackRoze10]

Hello! I'm a new subbie! I was sitting here thinking again about "updating" my bathtub. I of course came to you tube and found you two beautiful people. After I saw your tub, I immediately subscribed. Other than the smell, I'm so excited to do this. Thank you for sharing your DIY passion with us. I look forward to watching all of your videos. Take care.

[@DIYPowerCouple]

Welcome to the DIYPC Family! 🤗

[@dino0228]

Thanks for the warning about the primer fumes! I might opt to do this only in the bathroom that has a window and do something else for the one without. 👍

[@DIYPowerCouple]

It was worth it...you will be happy with the results.

[@williamstreit7116]

Thank you for your great video. It gave me the confidence to do my green 40yr old Kohler fiberglass shower tub. It was in perfect shape but wrong color. My wife loves the new glossly white look of the Rustoleum top coat now. There are a few things I learned. Sand with 220 at start and between all coats. We could see some scratching in finished product from the 150 grit I used initially. It took 4 coats to completely hide the green and the sanding marks. The $30 quart can ran out after the 3rd coat. Don't use the cheap $1 foam roller kit from the dollar store. The tray worked great but the foam expanded and kept falling off the roller. I then purchased a high quality foam roller and it worked great for the following 3 coats. I was able to reuse the same roller by keeping it in a baggie over night. Use a foam brush to do the detail work. The horse hair brush I used didn't work well at all. I was hoping for a better looking result when all finished. The self leveling properties of the paint didn't smooth out the over lapping from the roller. Not real noticable unless the light reflects off the surface at an angle which happens with a window or light fixture. It took me 2hrs to remove the old glass sliding shower door. Took lots of elbow greese and goof off to remove adhesive and silicone caulking. It took another 8 hrs to finish sanding and painting. It is still quite smelly in the bathroom after a week. Smells like vineger. If I had to do it over I would use appliance white spray paint (not the epoxy) for the areas above the water line in the tub. I used this on a fridge and it looked very professional. This would have been a lot cheaper, faster, less smelly and better looking. Not sure how it would hold up to every day shower use but it would be easy to respray if needed. If anybody does this let me know how it turned out. Hope this helps someone.

[@DIYPowerCouple]

We appreciate you and thank you for sharing your experience! 🤗

[@cheryljones3507]

this was good information I never thought about using marine paint for a fiberglass 🛀!! love you guys 💋fla

[@DIYPowerCouple]

Cheryl, awe...thank you! We appreciate the love 💕. -DIYPC 😃 kzbin.info/www/bejne/eqTChJ2rZbKheLc This is a link to the original video.

[@thomasritz4863]

Folks, thanks so much for these two videos. I have been struggling with what to do with my shower. You gave me some great ideas for redoing mine. Thanks again and best to you and your family!

[@andicacciatore9279]

Thank you so much for the update! I watched your tub diy and was so excited to find a solution to my ugly 1973 fiberglass harvest gold shower/tub! I can’t wait to do this - you guys changed my whole outlook - not replacing anything but the fixtures now. 😊

[@tonyhandley6195]

Hey thank you guys you guys are great together with a teem ... I’m going to use this on my fiberglass RV shower thank you so much

[@DIYPowerCouple]

Tony, please let us know how it turns out! Seems like this is going to be a really good project. -DIYPC 😃✨

[@marie-3011]

Would this work on a acrylic bathtub ?

[@DIYPowerCouple]

Not sure because it is fiberglass paint for a fiberglass tub (or boat) ⛵🌊. We personally try all types of things on items that look old.

[@jjclarkson3261]

Well done on project AND video!

[@DIYPowerCouple]

Thanks! Appreciate you.

[@DIYwithJJackson67]

Hey hey, my favorite DIY Couple! Great update. I enjoyed it, your videos are always so informative! Thanks for sharing💕

[@DIYPowerCouple]

Hey, J. We always appreciate your comments. Thank YOU...for supporting our channel. 🙏🏾 -DIYPC 😃

[@DIYwithJJackson67]

@@DIYPowerCouple no problem

[@michaelbarnes5670]

This marine boat paint is amazing. I use it not only on fiberglass but porcelain tile, Old marble sinks, wooden bathroom vanities. I have used the marine white and black paint on wooden vanities and medicine cabinets. I would love to get more Knowledge what about the marine boat bottom paint. It seems more thicker but I’m scared to use it. If you know anything about the marine boat bottom paint please let me know. Once again thank you for saving me so much money Doing my tubs and vanities over in my investment properties. Remember I using marine boat paint on all surfaces now. Lol. It always looks great.

[@DIYPowerCouple]

Michael, we haven't used the bottom boat ⛵ paint...yet. We're glad that it's working out for you as well. Like you, we like to experiment with products during some of our projects. -DIYPC ✨

[@samyoungblood3740]

Wow wish I had seen this sooner. During Covid we moved into our gutted out home we got at an auction, an it needed a new tub immediately.. but it also needed wiring, furnace, & plumbing. We have what looks like the same tub, but ours cracked and leaked under the tub. Plan to get new one in a couple years but really need to update this in the mean time. What type of putty did you use to fix any bad or cracked areas? Y’all did a Great job, it looks gorgeous!!

[@DIYPowerCouple]

Hi! We used this repair kit but it is only for small areas. You many need something stronger. kzbin.info/www/bejne/imOQp6iwjZanj5osi=XhL0cBPNr9V48fEi

[@sabrinaleonardo3277]

WOW.... today is June 2023. I am SO IMPRESSED ! What kind of cleaner do you use?

[@DIYPowerCouple]

Here's the cleaning process kzbin.info/www/bejne/d5-Xi3qwlpykoZY

[@patricklikesmusic1]

Thank you for the video. Starting to redo my house and I was going back and forth between epoxy and one of the marine paints. I figured if boats can stand up with this coating my little bath tub can. Headed to home Depot now to grab supplies. Luckily here in Florida I can get the paint almost anywhere.

[@ler5299]

This project looks great. I do have some concerns though about toxicity. Both when doing the project (sanding fiberglass), fumes and such, but also, concerns that the marine paint might be toxic while taking a bath? Great video though, thank you for posting. Lovely couple.

[@DIYPowerCouple]

This primer and paint are the real deal. The primer is very strong, but the smell will subside. Always wear safety gear when working with fiberglass. The marine paint is "toxic" prior to application, but after it cures, it is fantastic. We haven't had any "toxic" problems while taking baths or using the shower. Since posting this video, many people have done it...and have had great results. Hope this helps! -DIYPC

[@cewisham]

THANKS for doing a followup

[@tinar1402]

Thank you for this! I did two tub/shower combos, a bathtub and a shower this way! They turned out beautifully! Question: someone dropped something hard and made a little chip. Any product suggestions for a quick fix on a small spot? I know if I leave it, it will spread.

[@DIYPowerCouple]

You're welcome! This is what we used to repair a small spot: amzn.to/3SgiQ6O

[@donaschnider1568]

Hi, thank you for posting this, very helpful. I do have a question, I use my spare bathroom tub for my project, cleaning, washing foam, mini blinds and so forth. Does this scratch easy?

[@DIYPowerCouple]

For us, it made a nice coating, but we used the primer as well as the paint.

[@Joelwright9280]

How many coats of primer did you use fixing to try this looks great

[@DIYPowerCouple]

This Tub Refinishing video has more tips: kzbin.info/www/bejne/iHytm5poeatnj7M

[@brooksericd]

Thanks for the follow up video!

[@DIYPowerCouple]

You're welcome, Brooksericd!

[@Millasoaps]

I love the idea of this paint, but I don’t have a fan in my basement bathroom and I have a dog. I was totally going to do this, but my dog is so sensitive to smells, I’ve decided I will hire a company to redo my shower. I don’t actually use the shower and the company said it will not yellow over time. I need this to last the life of the house because I never want to replace the shower. Thank you so much for the update.

[@DIYPowerCouple]

You're welcome, Patti! -DIYPC 😃✨

[@ilbobisss]

Great job! How do you guys clean it? Will rinsing hair dye in the shower stain the tub surface? Thank you kindly🙏

[@DIYPowerCouple]

Yes, hair dye will stain the tub. See how we clean it in this video: kzbin.info/www/bejne/d5-Xi3qwlpykoZYsi=5eak_uJTkQMzTHUF

[@marttyd]

I had a tub in rental prop had cracks in a corner and someone tried to repair it and paint it. It looked terrible and I think it probably leaked. I used some kind of fiberglass repair where you mix two products together. I then filled the cracks with it and sanded it smooth. Then I used marine paint on it. It worked great. I had to point it out to people where I “patched” it. I had estimates from $495 + to fix it. Oh I used topside paint as well.

[@DIYPowerCouple]

Seems like you did the same thing we did. We appreciate you sharing 😉!

[@AlanReidPhD]

Wondering if this makes the tub floor slippery? Thanks for your great videos!

[@DIYPowerCouple]

It didn't make ours slippery but we had "texture" on the tub floor.

[@Chez88M]

Thank you So Much for your Videos, I have learned Alot about redoing my tub, and will do it like you suggested.

[@et873]

Thank God for your videos! Y’all are super talented and this video is amazingly helpful!!

[@DIYPowerCouple]

Glad to help Emelia!

[@pacman3556]

I used marine boat paint to paint the tiles in my bathtub/ shower and it looked great for about a year. After about two years it still looked good but started to show defects like minor scratches. It is now three years and it is yellowing. There is a very noticeable difference between the high gloss white bathtub (that I didn't paint- still original high gloss white) and the marine paint painted tiles. The tiles look "white" but next to the high gloss white tub they look really yellow. Big noticeable difference between the tub and painted tiles. If you use this expect it to really yellow over time. You will need to repaint the tub every three years or so. I am glad I only did my tiles (easier to fix or add a liner etc if I am not happy) and not my bathtub that would cost thousands to pull out and replace. I am searching for ways to maybe try and clear coat it or seal it so it doesn't fade.

[@DIYPowerCouple]

Did you use primer on your tiles? That makes a big difference.

[@pacman3556]

@@DIYPowerCouple no I didn't use primer. The marine paint I used from what I was able to look up didn't need a primer. It is a thick oil based paint that has a "primer" built into the paint. It is supposed to be ready to use to paint over anything. Also from what I was able to find on the internet a primer would not have made a difference. The paint "yellows" due to some chemical reaction with the oil base paint. The primer would have had the same oil base in it and the paint would have been over top of it so (from what I could find) it all would have gone through the same chemical process over the years and had a "yellowing" effect. I think it is more about the base (oil vs latex etc) that causes the yellowing not the primer vs no primer. But I am not a paint expert so I cannot really confirm. After about 3 (maybe 4 now?) I just put another coat of paint on my tiles and they look brand new again. All reviews I have seen seems to indicate that the paint lasts 3-5 years even when done by a professional so I guess my results are typical or within the average results. Everything is shiny again. It only took about an hour so I guess every 4 years or so I will just put a quick new layer of paint on the tiles (until I can afford to replace them lol). On a side note- never ever use latex based paint on tiles- that is meant for walls and would peel off within days

[@terribecker2531]

I thank God for you both… really and truly I am so encouraged…I needed to see your video… so very thankful I came across this one. Your tub looks fantastic even after over two years…I bought a tub and tile kit from Home Depot …I have sanded my tub once and getting ready to sand again… sat down to rest and started watching KZbin videos for hints and tips on how to apply my product and found terrible year later videos 😞… so I started researching painting fiberglass and the Marine Paint came up… I have watched a few videos of boats being painted… but so wondered if it would truly work on tubs… all this very intensive prep work you don’t want it chipping just one year later… then I found you both tonight and I feel God has imparted confidence to me through you both and that I am on the right track… one question… have you “refreshed” it with painting another coat to brighten it? I ask because I watched a video of a wonderful young woman who had painted her tub with the product I bought but am hoping to return and buy marine … and the chemical reaction of the new wet paint she bought which was the same product she painted her tub with caused the paint on her tub to horribly bubble and blister… poor woman ended up with a horrid mess… so I knew I was never going to be able to “touch” up …. I was wondering even though it is marine paint… can it be painted over with the same product and not produce a reaction… did you try yet? I really loved your presentation….sooooooo well presented and thought out!, THANK YOU!! 5 star rating!! Lord multiply their blessings!!

[@DIYPowerCouple]

Thank you so much for your comment! 🤗We are planning to sand and touch up paint in the future, but have done so yet. It is important to prep the surface well before adding an additional topcoat paint. We'll do another video when we refresh to see if it will bubble?🤔 Your tub is going to turn out great!

[@terribecker2531]

@@DIYPowerCoupleI will keep up on your videos when or if you “refresh” your tub. Blessings!

[@st3alth_bot]

What products do you use to clean the tub so that the marine paint finish is not damaged? Currently I usually use bleach and/or soft scrub but i'm guessing I wont be able to do that once I refinish?

[@DIYPowerCouple]

kzbin.info/www/bejne/d5-Xi3qwlpykoZY kzbin.info/www/bejne/aJzIeGaOm914gc0 Take a look at these videos. They should answer quite a few of your questions, but you can always ask if you have more. Best, -DIYPC 😃✨

[@lineshooter5w]

Wow, we bought a Condo in Sun city Arizona and ran into the same situation! I typed "how to...." and your video came up. Very informative and helpful. We have two showers so we got our work cut out for us. But we get to do it together and see the transformation. Thank you both!👍

[@DIYPowerCouple]

Working together is always nice! 😊

[@richiemonkey120]

Looks good going to try the same. If those were oil based paints it’s good to thin as you use. Otherwise it thickens and takes forever to dry. I made many mistakes lol

[@DIYPowerCouple]

Richie, trust us...we understand 😃.

[@cmmercante]

My fiberglass tub surround is white. Do I still have to use a primer or can I just clean and sand and apply a top coat?

[@DIYPowerCouple]

We are pro primer.

[@doesntmatter3068]

You guys are right on!! I kinda stumbled across y'all video. I work on boats/repair/paint as a side hustle for MANY years. Maybe 8 years ago I did exactly what y'all did. But I used an epoxy paint, knowing this is a super durable paint. It has 2 parts, mixing it in = amounts, Lots of time to apply before setting up. Rolls on very nicely with a GOOD foam roller. Thin coats 30 minutes then re-coat. 3 coats on vertical side, inside and out, 6 coats on the floor of tub. Lots left over with a 1/2 gallon kit ( I have tiled wall, standard tub only all it had to paint) Shower /tub MUST BE CLEANED, and CLEANED, I clean it with dawn dish soap/water and a palm sander, 120 grit Remove all sealers (silicone) 1st. This does finish very slippery, so put some bathtub sticker down so grandma don't fall and break a hip. VC Performance 2-Part Underwater Epoxy - with PTFE www.fisheriessupply.com/interlux-vc-performance-underwater-epoxy-with-teflon

[@chrisskins]

What do you use to clean your tub? Do you avoid abrasive cleaners and scrubbers?

[@DIYPowerCouple]

Hi Christine, we just posted this cleaning video for the fiberglass tub! 😃 kzbin.info/www/bejne/d5-Xi3qwlpykoZY

[@debraindxb]

Awesome video. Thanks!

[@ivanobar1]

Thanks. You two think outside the box, research, and navigate your own course. Your fiberglass tub would have had a topcoat of something, possibly an epoxy. That would be the determining factor for what would adhere to it. You reasoned your way to marine paint. I am puzzling my way to painting a cast iron tub a as have reasoned similar to you about marine paints. Ships are made of metal, so a marine paint for that would yield similar results with consideration to the original paint on the tub. Smoothness and no streaks are my concern. Adhesion, with uniform sanding and increasing smoothness of sandpaper seems the way to go. And, of course, cleaning and primer specific to the paint; that’s what helped the binding between the old and new paint. A ROS would have simplified your work (hand sanding’s tough), but you did it! Great. Thanks! I’m a convert. **I’ve seen the results of big box store “tub” paints. Not Good! **Glad you are safety minded.

[@melissalunarliving]

This was a great update vid .looks wonderful very greatfull for the breakdown and the why so ..brilliant thinking to use that type of paint kudos #DIYPC

[@DIYPowerCouple]

Thanks Melissa! Remember to pick up a "mask"! 😃

[@CN-dl2cj]

I don’t have the fancy filter masks. What would happen if I skipped the primer? I have a shower floor that is stained and worn. I assume it’s fiberglass. Can I just use the top coat paint?

[@DIYPowerCouple]

Yes, you can just use the paint, but it will fade much faster without the primer. One good thing to note is that this paint will not chip. 😃

[@Nappylox71]

Could the fading be due to like soap residue, especially after 2 years? Its surprising how much of that builds up on your shower walls, even with cleaning the shower.

[@DIYPowerCouple]

Yes, soap build up could cause fading. We are happy with the new look, but just like boats, you will have to refresh your tub. Good thing about doing it this way is that the paint will not chip. Best, -DIYPC 😃✨

[@PlaceForAnEcho]

Thank you for the video!

[@lizjohnston8056]

Thank you for posting! What do you use to clean the shower? thank you!

[@DIYPowerCouple]

Hi! This video shows how we clean it - kzbin.info/www/bejne/d5-Xi3qwlpykoZY

[@Tropicanax7x]

My parents saw your video and they suggested it when I mentioned wanting to replace my outdated beige tub sorround. I got my first house and it's outdated, I am all for budget friendly updates. I am SO excited to refinish it so it matches the new white toilet and vanity we have already installed ourselves. My only issue is not showering for a few days! Do you guys have another bathroom? If not, what was your work around?

[@DIYPowerCouple]

Hi Jamie! Yes, we have another bathroom that we all shared. 🤣 Do you have a gym membership with showers or a family member close by while you're waiting for the paint to cure? If you can make it through the 5 days, you are going to love the results of this DIY! 😃

[@kerch6]

This was SO HELPFUL!!!! I can't find any marine paint products in my area & Amazon is out of both. Guess everyone brought it up after watching your videos!!! Thanks again 😊

[@DIYPowerCouple]

kerch6, We're glad that you found this video to be helpful. We hope that you. Amazon says that they are working to get more in stock. You are right...this video has helped a lot of people. Let us know when you are able to get some marine paint and do your tub project. We would like to stay connected. -DIYPC 😃✨

[@kerch6]

@@DIYPowerCouple So I did it!!! My sister & I painted the shower & tub tonight. We used 'Rust-Oleum Tub And Tile Refinishing 2-Part Kit'. I thought I had a 'fiberglass' shower but it was actually 'acrylic'. Which was good because I couldn't find any 'marine paint' in my 'landlocked' state!!! The best tip I got was to not just use the paint immediately after mixing because it's super runny. I saw a video which said to 'mix, wait 10 mins, stir for 2 mins, wait 10 more mins, stir for 2 mins' then start painting. That waiting period really made it go on more like regular paint. The only bad part with using this product is the 'fumes' - they are HORRIBLE!!! We wore mask, had fans setup but still had to go outside for fresh air. We put on 2 coats today & will come back once the place airs out to put another coat. Thanks for your video. It was super helpful & have me the courage to even attempt this!!! Your prep-work on cleaning & sanding was REALLY helpful. I forgot to tape the walls before starting but I can paint over those mistakes 😜.

[@DIYPowerCouple]

Glad it is turning out good for you even with different products!! 😃 We wanted to encourage you to DIY and you DID! Your shower/tub is about to look AWESOME! 🛁 Thanks for sharing your project with all of us.👍🏾

[@LLOURENCOO7]

Amazing! Thank you!!! I’m doing it today

[@DrEsquire2u]

Hi all. Do you think you could have done this without the primer? Just do multiple layers of top coat?

[@DIYPowerCouple]

Yes, but we believe the original tub/shower 🚿 color will revert back much faster without the primer.

[@stephanieenyart918]

Question, perhaps you mentioned but I missed it. How slippery is the tub when it’s wet?

[@DIYPowerCouple]

Actually, once it dries, it's not slippery. We are about to do it again. Video coming soon. We'll address this question. Stay tuned so you can see when it posts. 😊

[@tgdiggity8887]

Very nice. Thank you

[@angelaogden5959]

Wonder if this can be used on a cast iron tub.