Ryobi 9" Bandsaw PN: BS904G: Assembly and adjustments in detail.

[@TheTubeDude]

This was the 7th how-to video on this Ryobi I've watched. This is the only one that made 100% sense in every aspect of instruction. The others made me contemplate using my bandsaw to remove my head from my body. This presenter must be a great repair/fabrication person. Thank you so much sir. Guys like you are rare to comeby.

[@maverickmikekauai3515]

Aloha Larry, Many thanks for the kind words and I'm glad you found the video helpful. Mahalo, Mike

[@thomasmclennon4746]

As another commenter mentioned, this appears to be the best of KZbin's videos on setting up the Ryobi 9" bandsaw. Not everyone has a knack for teaching, but you did good, Mike.

[@maverickmikekauai3515]

Aloha Tinnitus Rex, You have a great You Tube name! That's awesome. Thank you for the kind words and great feedback. Glad you enjoyed the video and hope you found it helpful. Mahalo, Mike

[@dannywaynemakemson]

I got mine with 4 packs of three blades each for only 35 bucks at a flea market. Probably one of the best flea market items I've ever bought.

[@JayThomasofficial]

Wow this is like the perfect video thank u so much . I cant stop watching and screen shot(ing) it . I used to just buy a new blade when I was experiencing the blade to drift etc . I said it’s time to figure out how to fix this correctly . Ty for your help.

[@wolfy40oz]

This is the video that has made up my mind to go get this saw in the morning. Thank-you for the well detailed video explaining everything. First video I've seen on this saw that explains the blade alignment in such detail and covers everything. Thanks again. Looks like I'm getting an early Christmas gift!

[@Birdsonly]

I watched a few how-to videos on Ryobi bandsaw set up and this is the BEST one on setting up all the guides. I brought it used and would have never known about the small adjustments for the blade.

[@gregernst2476]

100% easier than using the manual. Thanks!

[@jimtaylor5009]

Bought this band saw for my son’s Pinewood Derby, thank you sir this was the MOST informative video I found. The saw sounds perfect!!!

[@MikeyFFA500]

By far the best setup guide on KZbin! Thanks!

[@maverickmikekauai3515]

Aloha Mikey, Thank you for the kind words and I'm glad the video was helpful to you. Mahalo, Mike.

[@Piper93442]

Thanks so much for covering all the little blade guide adjustments. I've had my Ryobi for nearly 2 years, and have always had to compensate for blade drift and other quirks which I assumed were just due to the cheap nature of the saw. I didn't realize how far out of adjustment the guides & bearings were. Wow - what a difference when they're all in alignment! It's like a whole new saw. Can't thank you enough.

[@maverickmikekauai3515]

Aloha Piper, Yes it is a cheap saw but if adjusted properly and used within it's design parameters then it is a decent saw. I'm very glad that the video was helpful to you. Mahalo for the kind words. Mike

[@rob12449]

I just picked one up used and was dumbfounded that using the slide did not cut square. I kind of adjusted the table and looked at the guides but now I will try to adjust the guides properly and hope things square up.

[@maverickmikekauai3515]

@@rob12449 Aloha, hope the video is helpful to you. Mahalo, Mike

[@jeffhorovitz8663]

Mike, Omg after two attempts with other videos, I am so happy to have found yours. Just finished setting it up, and thanks to your expert tutelage, I am a bit more confident moving forward. Thanks again, jeff.

[@richardrollins184]

YES you cover all the area of assembly. Great job.

[@inatp3]

Don’t rush fading the video out. Miss a bit of it. Great presentation and helpful getting my new machine setup. The manual stunks

[@Mark-yb1sp]

Excellent narration and video. I finally found out what that ‘scrapping noise’ was. It was my thruster. Thanks Mike! You just gained a new subscriber. 👍🏻🇺🇸

[@maverickmikekauai3515]

Aloha Mark, Delighted to be of assistance. Mahalo for the great comment. Mike

[@melquismendoza8968]

thank you for your time to explain to us how to adjust the bandsaw as soon as I bought mine

[@itsagundam79]

I'm not a techie or a big tools guy, but this explains everything I need with great visuals! The only power tool I had in my kit for over a decade was a Dremel, and I've since added a belt sander, sewing machine and now a bandsaw, in that order. I like that this video isn't bogged down in jargon & points out possible problems. Even a nice mini-review. Thanks!

[@maverickmikekauai3515]

Aloha, I'm happy that you found the video helpful. Mahalo for the kind words. Mike

[@kibblesbitz1184]

Great tutorial! Always better to watch someone else do the assembly first. Mahalo!

[@maverickmikekauai3515]

Aloha Kibbles Bitz, Thanks for the kind words and am glad you found the video helpful. Mahalo, Mike.

[@kevinmeachem2138]

Mike, Thank you so much. I have the same saw and this video was the most helpful one of the several I watched. It made set up a breeze. I am grateful.

[@maverickmikekauai3515]

Aloha Kevin, I'm glad that you found the video helpful. Mahalo for the nice post. Mike

[@makeyourownsawdust9225]

Thanks from Australia. Great tutorial.

[@mikebarker3353]

Thanks man! I also got this as an early Christmas present in July. I wanted this addition to my hobby shop. I assembled it no problem but thank you for the detailed instructions on belt and blade alignment, etc.. I wouldn’t have known. This video was exactly what I needed. Many thanks for making it!

[@therealdennisroot]

Mike, thank you for making such a great video. I am new to woodworking and I bought this bandsaw. Your information has helped me tremendously. Thanks again!

[@maverickmikekauai3515]

Aloha Dennis, Thank you for the kind words and I'm glade you enjoyed the video. Mike

[@GospelChoirs]

Thank you for a very thorough set up video. Thank you for getting right to the point. I just received mine today from Direct Tools Outlet and unfortunately the person packing it put very little packing material in the box so the unit was banging into the sides of the box during shipping and the box even broke open. Your video has provided the checks for me. God Bless!

[@maverickmikekauai3515]

Aloha GospelChoirs MV, I am delighted that you found the video helpful. Praise the Lord for the free gift of salvation given to us in our Lord and Saviour Jesus Christ. May this be the day of His glorious appearance! Mahalo, Mike

[@GospelChoirs]

@@maverickmikekauai3515 Love it Love it!!! I knew that was a gospel hymn in your Rigid Table Saw assembly video!!! Amen! Praise The Lord! So refreshing!!!

[@mikefisher9992]

Thanks for a very comprehensive and detailed set up video. I have just bought the same saw under the Titan brand in England and will find your set up procedure most helpful, thanks again!

[@maverickmikekauai3515]

Aloha Mike, I'm delighted that you found the video helpful. Cheers! Mahalo, Mike

[@instant_mint]

Really helpful, thank you so much for making this video!

[@maverickmikekauai3515]

You're so welcome!

[@Snowball042]

Perfect. Looking for a saw to do some woodworking hobby projects with my thirteen year old daughter this summer. Your video was great in showing this saw setup and overall quality vs price. I will probably pick one up tomorrow. Thanks!

[@maverickmikekauai3515]

Aloha Snowball042, Glad you enjoyed the video. Enjoy the new saw! Mahalo, Mike

[@wattsnex2725]

Easily the best set up video for thud saw, thank you.

[@woodyal3726]

Thanks !!! Learnt how to adjust the blade.

[@adventureDad1976]

Thank you so much!!!! This is what I needed

[@Birdsonly]

May I add a suggestion for adjusting the dust brush? Put some food dye on it before closing the door and you will see how far it goes in and even touches.

[@jonkas4542]

Thanks for all those details!

[@maverickmikekauai3515]

Your welcome Jon. Aloha, Mike

[@jonkas4542]

@@maverickmikekauai3515 Mahalo!

[@cosmicperception7731]

Great video. Thank you for sharing this.

[@maverickmikekauai3515]

Aloha Cosmicperception, I'm delighted you enjoyed the video. Mahalo, Mike.

[@Jeff_Engineer]

Thanks Mike! I bought mine used and your setup instructions were perfect for bringing mine into to shape before I started using it.

[@henrysboy2]

Outstanding video. Learned a ton. TY!

[@fordguyfordguy]

This was very helpful

[@maverickmikekauai3515]

Aloha Andrew, Glad you liked the video. Mahalo, Mike

[@jaytucker2816]

Very informative video. One thing I noticed though, when you turned the wheels to make sure the blade was centered I could still hear a faint grinding sound.

[@maverickmikekauai3515]

Aloha Jay, Thanks for the great comment. It was probably the blade guide(s) just barely making contact with the blade. If I recall they were set to a tight tolerance. Mahalo, Mike.

[@joonyer77]

Thank you. This was very helpful.

[@maverickmikekauai3515]

Glad you found the video helpful. Mahalo for the kind words. Mike

[@robthompson8285]

Thank you so much for this video! I have a Ryobi bandsaw coming tomorrow and you will make my setup much easier 😊

[@ChonkysWoodshop]

Aloha! Ive been looking to add a small band saw to my small workshop. The ryobi might be a good starting point for me

[@maverickmikekauai3515]

Aloha Jason, I'm happy with it so far but don't expect to much from it. Mahalo, Mike

[@cheikhmbengue429]

Thanks very helpful.

[@SewWhittle]

I bought this saw a few months ago. The one thing missing from it is the fence. A little upset I didn’t figure this out sooner. 😢

[@maverickmikekauai3515]

Aloha sal6613, Mine did not come with a fence, just a small miter gage. I do think a fence for it would be great to have. I wonder if they make one or if it would be better to make one... Hmm, the wheels are turning. Mahalo, Mike

[@kle2217]

Very informative video. Seems like fussy adjustments for this model. I'm still considering this Ryobi 9" model or the more expensive WEN 10" band saw. Still haven't decided yet. Have you tried to re-saw a 2x4 or 4x4? Specifically, a full 96" piece of lumber? Or what's the longest length re-saw you think it can take?

[@maverickmikekauai3515]

Aloha K LE, I do get a bit fussy with the adjustments in an effort to get the most from an inexpensive tool. At this point I have not re-sawed any 4X material on the saw. Mahalo for the comment, Mike.

[@paulvictor3316]

This was great! Question though, what size allen wrench did you use for the blade adjustment and did it come with the band saw?

[@jstarr3676]

I have this bandsaw, and mainly want to make boxes I've seen online but even the smallest of cuts my blade wobbles. Will this video help me out?

[@bananabana6630]

I bought this and it is great for small projects. I would not use this Bandsaw for large pieces of wood because it has its limits. The manual will tell you what size of material you should be cutting. You want large cutting you need kick out the cash for a more expensive bigger machine.

[@maverickmikekauai3515]

Aloha BB, I agree, thanks for the nice comment. Mahalo, Mike

[@jerrytalley802]

Question, have you cut any harder materials? I was trying to cut some Fir about 1 5/8” thick. I think it was my saw out of adjustment? Also, have you seen who makes a better quality blade? Thanks

[@maverickmikekauai3515]

Aloha Jerry, Yes I have cut hardwoods but they were all less than 1" thick. Not sure who would make a high quality blade for this size saw. Mahalo, Mike

[@rkooscar6866]

What are the bands saws mainly for. I have been seeing them pop up lately

[@brendarunkle8796]

Do you know if you can get a bigger blade for this?

[@maverickmikekauai3515]

I believe you can get a wider belt but you will have to do the research on that.

[@stephenterrones3561]

Thanks for sharing

[@maverickmikekauai3515]

Aloha Stephen, Hope you found the video helpful. Mahalo, Mike

[@alessampiyonu]

Hi, do you know the difference between rbs904 and rbs904g version ?

[@jerrytalley802]

Getting the blade to stay in place is a little tricky. I need to go back and try adjusting my blade guides. It seems it cut ok when I got it. Had to change blades, tried the Avanti 3 pack, and couldn’t get it to cut right at all. After this, I’m thinking it’s the guides? Thanks

[@maverickmikekauai3515]

Aloha Jerry, Make the adjustments as well as you can then make your cuts slowly. This is a hobby level saw so try to work within it's design parameters. If you need a better saw then be prepared to upgrade and spend quite a bit more for a more capable saw. Mahalo, Mike

[@ericbrock9387]

Jerry, I'm in the same boat. Blade that came on the saw was great. I bought the Avanti 3 pack and they are straight garbage, even with the adjustments. I'm going to try a Bosch blade next.

[@gpslightlock1422]

Does anyone know the bolt size & pattern for mounting this bandsaw to a workbench? Can't believe Ryobi doesn't provide this information, or better yet, a template in the manual.

[@lelandfranklin3487]

Just found one..hardly used...for $85. Going to use this video and check the alignment.

[@maverickmikekauai3515]

That's great. Good luck!

[@Hữu-Nhân-2024]

Could this ryobi bandsaw cut ebony wood?

[@maverickmikekauai3515]

Aloha Nhân, Good question, I have not used it to cut Ebony but I don't see why it would not be able to cut any type of wood that fits within the saw and that the saw blade is in good shape. Let me know how the cuts go so that everyone else can be informed about the capabilities of this band saw. Mahalo, Mike

[@solodragun]

I loved this band saw when I first got it, but blade adjustments and replacements are incredibly fiddly and annoying to the point I contemplated hulking it across my shop several times.

[@maverickmikekauai3515]

Aloha GT, Yup, I get that it is a fiddly thing to get adjusted properly so that you have the highest degree of accuracy. For a hobby level saw it is ok but for a shop or serious woodworker it would not be the first choice for a band saw. Thanks for the great comment. Mahalo, Mike

[@heknows5418]

I did toss mine across the shop , this thing is crap

[@carterscustomrods]

I have the older Blue model, and it has some better concepts, and definitely some worse concepts. The blue model has traditional squared cooling blocks which I like better. However, the thrust bearing was designed with the blade running against the flat face of the bearing... it makes the entire saw junk imo. The older model also has the dust brushes, but they are mounted to the frame, rather than the door. So they're easier to setup. It also has one large door vs two smaller, sectional doors. The older model also doesn't have a very good lower wheel adjustment. I can never get the blade, and motor drive belt to both run at a good spot. So I make sure the blade is lined up right, and just kinda hope that the ⅓ of the drive belt hanging off the edge won't be a big issue. Lol.

[@bigviper64]

Your hand was in the way for the Lower Blade Guide Adjustment. Nowhere has it been mentioned to turn CW or CCW to tighten or loosen the adjustments. Just “briefly” you pushed on the small black button on the side of the adjustment aperature…you didn’t say here that we need to do that. I have had all kinds of trouble getting my Band Saw to cut a straight line and so far everyone say’s these adjustments are easy..no clear instructions!

[@GlennClark-i6w]

Good set up video, but you need to fix the audio levels on your video. Every sentence fades out too quickl

[@maverickmikekauai3515]

Thank you.

[@Fe4ver_dre4m]

5:09

[@ianparker9779]

I bought one of these Ryobi Bandsaws and it is the worst piece of crap I have ever bought. The threads for the blade adjustment were stripped so I returned it to the place of purchase and was refused a refund.

[@maverickmikekauai3515]

Aloha Ian, Sorry that you had such a bad experience with the saw. It is definitely just a light, hobby level saw. Refused a refund... Seems like a poor business practice to me. Good luck. Mike

[@james8583]

Way to much fine tuning. It is very incomplete, obviously, when they ship it. In my experience, when you have this much fine tuning at the beginning, then when you need the slightest adjustment you have to keep doing more fine tuning and no cut is the same, especially on a band saw, ie. Width and length and thickness when trying to make curved pieces and the like. If you are a professional and this is your job (earning money) then who cares how much fine tuning, YOUR AT WORK AND YOUR TIME IS BEING PAID. But guys and gals that just want to get right in and work a hour or two, maybe three, we want to work not fine tune and sharpen all day and if you aren't great at it, well, it takes all day. The industry has to wake up and make things ready to go in two minutes. Blades put in and press button and wheels aline the blade in 30 seconds and then you cut, so the wheels do the work, I'm not being paid. The problem with these videos is that these guys get paid. We all would sit there for 2 hours (and I know they make mistakes in setting things up, thus the video would be longer but they cut all the waste out) if we were paid 2 or 300 dollars for the hours. Maybe I don't have the patience but I also have a live and most guys and gals are on the move and you will also notice that (for the most part, outside of certain young guys wanting easy money) all the people are older woodworkers or just older white guys buying and selling these things and that's because 1) they did it for many years or 2) they are retired or semi-retired. Occasionally you get the young lady, but if not for KZbin and her coping things from the beginning they would not be woodworking, let's be honest. Sorry so long, but again, set up is always the worst and anyone that I know that does construction (including me), outside of fixing a door or a faucet or something in their home, well, DOES NOT DO THEIR WORK OUTSIDE OF BEING PAID FOR IT. Take away KZbin (and in the 80s you could count theses people on one hand) and no one would be a "carpenter" and 99% of these people are not true blue carpenters. Sorry, but I thought it had to be said (Lol;Hahaha). God Bless brothers and sisters Especially if you made it this far. P.S. and if you didn't make it this far then you know my frustration and boredom in trying to use a plastic Chinese tool, and that is a whole another subject that these great woodworkers gloss over.

[@maverickmikekauai3515]

Aloha James, You had some good observations and provoked some thought which is good for everyone. This only a hobby level tool, a serious woodworker most probably never consider purchasing this item. However, I personally learned new things making the adjustments and these adjustments on this tool have a lot in common with professional grade bandsaws. I don't make any $ from making these videos and I am retired so the time it takes is not an issue. If the video helps someone else set up their bandsaw then I am happy with that. Thanks again for the good observations. Mahalo, Mike

[@sheldondrake8935]

outstanding video. one technical comment, no need to fade out the video and audio at the end of each cut, just keep it full up, so we don't miss a thing ; ) for next time...

[@suhnkhnroc2385]

Man you have no idea how much this helped. I greatly Appreciate it good Sir. 🫡