Thanks for the Tutorial! Its my first blender object! Now (in the middle of the night) After i'm make my bed, i'm going to bed :D
@Glowbox3D2 жыл бұрын
lol
@cephalos81 Жыл бұрын
the difference between guru and him is guru's videos account for you being slow at following the steps because you may be new to blender and so on, i myself find me stoping and rewinding for most blender content creators. With Michael if made it slightly slower , maybe 25-30 minute videos then his audience would widen up because he would make simple things step by step a lot slower thus catering to the wider community of new comers and intermediate modelers. Like i speak for myself when i say i could not watch Michael on my first day or 2 of blender experience. i hat to go do the donut with guru to learn that basic stuff. So what Michael needs to do is design some projects that would take the " idk wtf im doing in blender" guy and put him through a mini course... like guru's donut series. something on that style to cater to the guy learning the ui all the way to basic shading and stuff. Doesn't have to be the primordial donut, just something like it
@hanakun4 жыл бұрын
Like for the freeze frame joke haha. Great tutorial :)
@Glowbox3D4 жыл бұрын
Haha thanks!
@vaineislive47982 жыл бұрын
the famous old but gold content. u awesome man, i loved when u stop to talk "random" things, make less serious and funnier to learn =D
@Glowbox3D2 жыл бұрын
Hahah thanks! Glad you enjoyed the vid!
@kevinlernot92984 жыл бұрын
Don't usually comment on videos but his one really helped me out! thank you :)
@Glowbox3D4 жыл бұрын
Ah thanks Kevin. 'preciate it.
@АкимПанов-д1ж4 жыл бұрын
It was brilliant!!! Such a good tutorial.You're so underrated. You deserve more like Blender Guru and CG Geek.
@Glowbox3D4 жыл бұрын
Nah, those guys put a lot more work into their CG channel than I do. They deserve it. I like Grant Abbitt quite a bit too! He's one of my favorites. EDIT: thank you by the way. Very nice of you.
@sntt34044 жыл бұрын
8:15 my bedsheet became alive and is trying to run away 😬 it is literally pulling itself towards the end of the bed. the folding part doesnt fall over itself and starts the movement. i tried using higher friction than 20 for the bed but nothing seems to help
@alanlr4694 жыл бұрын
turn your gravity to 0
@doinklin98893 жыл бұрын
this reply is wayyyy too late but maybe you changed the friction under particle instead of softbody and cloth?
@elixorvideos2 жыл бұрын
Duuuude you introduced me to baking and saved me soo much time!
@bentheultimatelegend2 жыл бұрын
This was so helpful and entertaining, thank you!
@Glowbox3D2 жыл бұрын
Thanks so much Ben! You're a legend!
@FilmSpook Жыл бұрын
🤣🤣😂 Hilarious intro and excellent tutorial!!!! Many Thanks my Brother, hehe.
@Glowbox3D Жыл бұрын
Thank you!
@lilycamillewolf80863 жыл бұрын
Great tutorial, thank you :) best bedsheet I've made, and the wrinkles thing is awesome once you get the hang of it
@Glowbox3D3 жыл бұрын
Thanks Raven! Love the name.
@da_drood-digitalart3 жыл бұрын
Omg i love you man! You make everything so pleasing to follow and have me laughing during the tutorial. What more can i ask?? :D Thank you so much
@Glowbox3D3 жыл бұрын
Ah, you are awesome for saying so! You made my day, cheers!
@ZayxSt4 жыл бұрын
just the intro made my sub to your channel lmao, thanks a lot for these tutorials pal
@Glowbox3D3 жыл бұрын
Thanks so much!
@luisch44342 жыл бұрын
it was perfect. not to fast and not to slow
@Blendercage3 жыл бұрын
Exactly what I was trying to find. Thanks.
@mr.voughnelle2474 жыл бұрын
Thanks for this. Appreciate the lite entertainment as well.
@Glowbox3D4 жыл бұрын
My pleasure! Glad you don't mind the tomfoolery.
@rowebot694 жыл бұрын
I'm using it on a model im doing my self and the mattress and base of the bed have collision. I set everything up the same, but when i bake it and play it the Bedsheet just crumples toward center the flys away. Any tips on why its just crumpling in and crawling away instead of just falling?
@brianoisenosumeifidon5943 жыл бұрын
Subdivide the plane you’re using as the sheet
@K99-g9n3 жыл бұрын
That's because your subdivision are too close to each other. You should reduce the distance on the self collision section
@Elanator3 жыл бұрын
This is a old video so i dont know if i will get a response but is it possible freeze the sheet at 1 frame of your choosing and placing it at frame one as I am also key framing other objects in my scene so i cant cut how long the scene is. Any suggestions or answers?
@empiremonkey Жыл бұрын
I wanted commentary on that mug and I got it. Thank you. Also, my bedsheet is hovering. What the heck...?
@Glowbox3D Жыл бұрын
Hahah nice! Hmmm, maybe check your collision distance for both the cloth and the collision object. .001 is a good place for both.
@empiremonkey Жыл бұрын
@@Glowbox3D great! I'll try again!
@prod.MRBLOXY3 жыл бұрын
just for that intro i instantly subscribed
@Glowbox3D3 жыл бұрын
Thanks so much MrBloxy!
@jaysonplayz75413 жыл бұрын
he look so happy
@Glowbox3D3 жыл бұрын
I'm just so dang happy!
@theUAPwhisperer3 жыл бұрын
ROFL...!!! i THOUGHT MY pc FROZE... DUDE! FIRST VIDEO i SEE OF YOUR CHANNEL. oops... sorry all-caps :( I had to subscribe! great humor :P
@Glowbox3D3 жыл бұрын
Hahhaha. I'm glad a handful of you out there are as wacko as me! Cheers!
@kitsunedotexe35873 жыл бұрын
even tho i knew it wasnt a freeze frame (the seccond time i watched it) it made me jump both times when u spoke =x= XD
@heckle8754 жыл бұрын
Thanks a lot bro! Subbed and liked love these types of videos from you
@Glowbox3D4 жыл бұрын
Thanks!
@pufuletu_02752 жыл бұрын
Thanks for the tutorial my guy, really helpful! :D
@cesaramaral70074 жыл бұрын
Thanks for the video, have you improved audio ever since? This one is super low on max volume on my phone.
@Glowbox3D4 жыл бұрын
Yes, yes I have. I don't know why I recorded it so low. I have a preamp and a good mic, but I had it too low. Check out my newer vids, and you'll see the difference. Thanks!
@salvadormarley Жыл бұрын
Thank you for the tutorial. When my blanket falls on the matress it works but there is a gap between the blanket and matress if i get close with my camera, is there a setting to get rid of the gap?
@Glowbox3D Жыл бұрын
Yes, it's collision distance--the cloth will be default distance 0.015 m. You'll want to change this to 0.010 or less. The lower you go, the closer it will be, but at some point it might become unstable. Find a good number. Also, make sure self collision is on, with a good distance too. Also, if things slip, up the friction to 15 or 20. Good luck.
@salvadormarley Жыл бұрын
@@Glowbox3D Hey, thank you for your reply. It got me there, thank you. And might I also add, your tip to increase the friction was a literal godsend, I tried everything to stop my blanket from slipping off the bed. Thank you. Subscribed.
@Glowbox3D Жыл бұрын
Schweet, thanks! @@salvadormarley
@bakiyarajkaliyaperumal89384 жыл бұрын
NICE DUDE KEEP GOING U DOING GREAT BRO
@habiebmajid99443 жыл бұрын
Thanks Friend!!
@genericwhitemale70284 жыл бұрын
Thx alot, now that I made my bedroom and created this bed as well as modeled a character from a video ga-... you know what nvm.
@Glowbox3D4 жыл бұрын
Can't tell if this is an off-hand jab at me, or if your humor didn't cross over.
@envi55323 жыл бұрын
Thank you for the tutorial when I use the self collider though it continues to collide with itself until it falls off the bed.
@serogapeterson86482 жыл бұрын
I was laughing my ass of.. HAHHAHAHAHAHAHA
@Glowbox3D2 жыл бұрын
Nice! Glad you dug it. It never gets better than that, so... ;) Appreciate the comment, cheers.
@mile2k53 жыл бұрын
lmfao just from the beggining i know i'm gonna follow this guy :(((
@Glowbox3D3 жыл бұрын
Hahah, thanks man!
@petermutuku95233 жыл бұрын
thanks very much.it works really cool.
@dantitoprrito4 жыл бұрын
Great video! Thnx
@Glowbox3D4 жыл бұрын
Thanks!
@cozycup71873 жыл бұрын
1000th subscriber
@Glowbox3D3 жыл бұрын
Woo hoo!!! Nice!
@kidmax87934 жыл бұрын
Hey, great tutorial. I got a problem. The sheet didn't collide with the matrace. I don't know why it didn't work, I set it as a collision object and all. Would be great if you could help me out, maybe I'll find a fix on my own. Edit: I tried it again with self collitions enabled and it worked out
@Glowbox3D4 жыл бұрын
Glad you got it working!
@hartdr80743 жыл бұрын
Thank you!
@rustey2223 жыл бұрын
Great video
@Glowbox3D3 жыл бұрын
Thank you!
@mastart4971 Жыл бұрын
PS: Ever considered to come to Amsterdam to the BCon??
@thomasluk43192 жыл бұрын
So... how many faces would there be for that cloth
@Glowbox3D2 жыл бұрын
It looks like 75 cuts on the subdivide creates 5776 faces.
@AnasuyaAnimationStudio3 жыл бұрын
Nice ...👍👍
@nickf43243 жыл бұрын
Thanks
@Ragnarok9262 ай бұрын
plz help my sheet arent moving
@Glowbox3D2 ай бұрын
There could be many reasons for this. First would be you didn't set the sheet to 'cloth'. Second, you didn't activate the simulation. (you can do this with spacebar too).
@mastart4971 Жыл бұрын
The Preset... the Preset... thank you so much... I never clicked there.... thank you
@aradev3 жыл бұрын
Helpful thanks
@Glowbox3D3 жыл бұрын
My pleasure!
@aradev3 жыл бұрын
@@Glowbox3D Do you have website ?
@Glowbox3D3 жыл бұрын
I have an Artstation: www.artstation.com/rabidbeta
@aradev3 жыл бұрын
I add you
@kitsunedotexe35873 жыл бұрын
hydration ♥
@MooseManh3 жыл бұрын
the bed sheet literally just falls out of existence
@pradyumnasrivastava94993 жыл бұрын
I didn't knew Michael LEFT dUNDER mUFFLIN to become a 3d artist. Is Pam behind this all?
@Glowbox3D3 жыл бұрын
? Who is this ?
@pradyumnasrivastava94993 жыл бұрын
@@Glowbox3D sir, just a little joke, about the show, THE OFFICE, U.S. you look a lot like the manager
@Glowbox3D3 жыл бұрын
@@pradyumnasrivastava9499 Ah, yes, that's what I thought. lol. Great show. Go check out the British version with Ricky Gervais...even funnier in my opinion. Cheers.
@pradyumnasrivastava94993 жыл бұрын
@@Glowbox3D man its not on netflix, how sad is tht. Are you a londoner, dear sir?
@Glowbox3D3 жыл бұрын
@@pradyumnasrivastava9499 No, just like saying 'Cheers!' My Dad was born in UK though, so I'm 2nd generation in US. ;)
@lucianomagnone75684 жыл бұрын
I would suggest using the new cloth brush to add wrinkles, it works better and its great!. Good video, and btw if you are looking for an editor for these videos hit me up.
@Glowbox3D4 жыл бұрын
Ya, the cloth brush could have been used here, but I wanted to keep it simple and under 10 min. It's one of my first early vids. Believe it or not, I edit as well, just didn't do any for this first tutorial. Thanks man!
@erkanmikiver27004 жыл бұрын
Thank you for the tutorial! How do you select the entire line at once? It is always very time consuming as i have to select each individual one
@Glowbox3D4 жыл бұрын
ALT / LMB -- selects an entire loop cut. If you want to keep selecting more and more, I believe SHIFT as well?
@erkanmikiver27004 жыл бұрын
Glowbox3D - Michael Reed Thank you! I will definitely be helpful for me 🙂
@merkur56064 жыл бұрын
Self collisions dont work for me. I have no idea why. When I turn them on my cloth just shrinks in a weird way and jumps away. Wtf.
@sadnessinmylife4 жыл бұрын
Same with me. I'm following his steps but my sheet also crumples up.
@devinm71863 жыл бұрын
Then you need to turn down the distance value in Self-Collision
@Jazmiinals3 жыл бұрын
Try putting the wind to 0 in field weights
@Chokwik3 жыл бұрын
@@devinm7186 thanks mate! worked for me
@cephalos81 Жыл бұрын
6 months into blender still learning, however been working on a capital ship down to the bolts and nuts... we are at 2 million faces right now and i finally get to do crew quarters...so i go oh well im gonna make a sheet put it under cloth get some wrinkles on pre-animation, yay all is great, lets drop the sheet. hhmmm why does it keep sliding????? wtf its a damn solid it should not slip off...there i go, fucked for the next hour pressing buttons, trying to figure it out, then after 2 cups of coffee an 2 cigarettes i give up and fall to the mighty youtube. then BEHOLD THE TINY VIDEO THAT ACTUALLY REMINDED ME THERE IS A DAMN FRICTION OPTION. Thank you so much , you get my like and subscribe. as for them 5000$ I dont know what to tell you man, try to make something and go viral and if you figure it out and would like to share how to fork up 5 grand out of nothing FOR THE LOVE OF GOD DO LET ME KNOW, I BEG YOU. im running blender on dual 1660's SLI... an i7 and 32gb of 3600mhz ram... i need at least (minimum) 2x3080's an i9 with a good 700 series motherboard and 64 gigs of ram. Imagine on my present rig what rendering is like to showcase a small sction of the ship im making ( a 1 minute video)...my pc ran for 22 hours straigth. but thank you so much for the advice my friend and god bless channels like yours, you make newbs like me and veteran alike's jobs easier.
@LpsYcats3 жыл бұрын
I have self collision and the bed's collision on (+friction) but my blanket just transports? Please help
@nanobot_29504 жыл бұрын
I have a problem: i just watched a tutorial video by Jonathan Kron. ''Pillow Creation in Blender 2.83'' and i use the blanket of this tutorial , but why is my blanket falling trough my pillow? even if i add a collision to my pillow the blanket falls trough
@Glowbox3D4 жыл бұрын
Make sure you are done with your simulation with your pillow. Then freeze that...convert to mesh or whatever it is. Then make that pillow mesh a collider. Then do your blanket/cloth sim.
@nanobot_29504 жыл бұрын
Thank you!
@shakaama4 жыл бұрын
isn't that the thickest cloth sheet ever, in history?
@Glowbox3D4 жыл бұрын
Joke right? I didn't even add a solidify to this. I probably should have. ;)
@bassboosted97084 жыл бұрын
thanks. subscribed
@marciaandreia16902 жыл бұрын
When I try to do Bake, my bedsheet just goes through the bed and starts falling in the void untill the frames finish. What I am doing wrong? Besides thinking Blender is for me 💀
@Glowbox3D2 жыл бұрын
Hey thanks for the question--I would first make sure the mattress has a collision on it. Next I would make sure the object collision distance is lower than the default (0.015) and try setting this to 0.001 or something. You can also increase the quality of collision from 2 up to 3 or something. Good luck!
@marciaandreia16902 жыл бұрын
@@Glowbox3D That was really helpful, thank you so much!
@dixieboyz12 жыл бұрын
I did something wrong and my sheet turned into a bat and flew away 😥
@Glowbox3D2 жыл бұрын
1. Stop taking LSD 2. Start tutorial again after 8-12 hours.
@sergentekdemir3 жыл бұрын
Don't forget to choose the bed object as collision
@Glowbox3D3 жыл бұрын
1:14
@regeneratedwitch2 жыл бұрын
hey! I tried the tutorial but there's a problem with me! my sheet goes off the grid, all the way down in object mode.
@Glowbox3D2 жыл бұрын
Hello. I'm not quite sure what you mean. Try making sure the collisions are set to .001--for the main collision as well as the self collisions.
@gradedgodly4 жыл бұрын
Can you help me out? My cloth is like too bouncy and thick (kinda like Al dente pasta)... How to make it thinner and more realistic?
@Glowbox3D4 жыл бұрын
Hmm. It's just a plane correct? You chose 'cotton' from the presets I showed ya? Gravity and world scale are normal? You could add thickness (by making a super thin box, or using solidify on a plane), but we just went with a plane for this tutorial.
@Eclectic_Chicken3 жыл бұрын
Hi, Nice tutorial. Only thing I cannot do is bending the shit with only an edge selected (4:35). Any help ? Thanks
@Eclectic_Chicken3 жыл бұрын
ok, found it: just had to press O to activate proportional editing !
@Glowbox3D3 жыл бұрын
Yes, make sure you use proportional editing, and mouse wheel up and down for the size of the circular manipulator. Shortcut key: O. Cheers!
@Eclectic_Chicken3 жыл бұрын
@@Glowbox3D Thanks for the tips ! Other thing, my bedsheet keeps sliding from the bed, whatever the friction I used. Any idea why ?
@Glowbox3D3 жыл бұрын
@@Eclectic_Chicken Set your friction to 20ish for the mattress and/or the sheet.
@Eclectic_Chicken3 жыл бұрын
@@Glowbox3D That's what I did but it didn't work. But my collider had "single sided". when I unchecked it it worked ;) thanks again.
@supakku3 жыл бұрын
Give him more subs
@Glowbox3D3 жыл бұрын
Ah you rock! Cheers!
@maryamzilhusna24803 жыл бұрын
hello! i love your work, new subscriber :D this is late but i'm having trouble with the cloth appearance - it shows every polygon of my subdivisions and arent smooth or clothlike. i tried applying smooth modifier, doesn't work, adding more subdivisions, nope. any ideas?
@Glowbox3D3 жыл бұрын
Hey Thanks! ;) That's really odd. Smooth shading should fix that. And if your SbD is enough, with the smooth shade, definitely shouldn't be polygonal. Try it with another SbD plane that isn't cloth or anything.
@deathonwheels13554 жыл бұрын
Hi, this was really helpful, thank you! It seems that whenever I try to play the animation, my bedsheet slides off of the bed after falling. Is there a way to fix that?
@Glowbox3D4 жыл бұрын
Yes! Increase the friction of your collision object to 20 or so. Good luck!
@deathonwheels13554 жыл бұрын
Oh it worked! Thank you so much :))
@itstudent56793 жыл бұрын
Hi proportional editing doesn't pick up the sheet like in the video its only picking up on the first row of the subdivision.Anyone know what's wrong?
@Glowbox3D3 жыл бұрын
Make sure that when you have proportional editing on, and you begin your scale or move, that you mouse wheel up and down to see the circle of influence...that circle sometimes is so big it's off camera, or it may be tiny. Roll up and down to find it. Also, you can choose in the proportional options to manipulate 'connected' or not...try that sometimes if you don't want to manipulate nearby mesh. Cheers!
@TheNealzarka2 жыл бұрын
@@Glowbox3D coming in a tutorial 6 moths old and seeing every questions answered is just so good. I'll subscribe.
@Glowbox3D2 жыл бұрын
@@TheNealzarka Ah thanks Neal. I've been behind on recent content, but I'm trying to make it all happen again.
@TheNealzarka2 жыл бұрын
Thanks!!!
@qwertyuiopasdfghjklzxcvbnm30932 жыл бұрын
No matter what I do, I can't seem to bend the plane. Well I can, but it isn't smooth and makes weird shapes instead. I've tried different methods, but nothing seems to work.
@Glowbox3D2 жыл бұрын
Are you using proportional editing? The key 'O' toggles it on and off.
@harrishaid75284 жыл бұрын
i dot understand whats wrong with mine, whenever i tick the self collision and bake it. For the animation is spams and engulfs everything, when self collision is not equipped this isn't an issue. Please help.
@Glowbox3D4 жыл бұрын
That sounds very odd. Since this setup is very quick and easy, I'd say start from scratch. If you follow the tutorial, this really should not happen. Good luck.
@meganpotgieter90044 жыл бұрын
@@Glowbox3D Hi hi, I have the same problem. Without the self collision the cloth works fine, but as soon as I select the self collision it totally freaks out and flies around the screen. Saw this comment so re-did it a few times, still the same effect. Is there something else I can check to see what the problem might be?
@Glowbox3D4 жыл бұрын
@@meganpotgieter9004 Gosh I don't know. Is your world scale normal? Are your field weights normal? Make sure you go back to frame one, delete bake and re-bake.
@meganpotgieter90044 жыл бұрын
@@Glowbox3D I checked the world scale and field weights, everything was normal. I did, however, find a setting I can work with. I adjusted the Friction to 4. Distance to 0.1m and impulse clamping to .1. It's still going through a bit, but at least it's something I can work with. Thanks again for this video!
@JoseGarcia-oo1vt4 жыл бұрын
Try decreasing distance in the self collision tab. It worked for me by decreasing the default distance of .015m to .0015m. Hopefully this helps anyone that comes across this problem.
@vladimirharamincic12043 жыл бұрын
Can anyone help i cannot bake it sayes 0 frames in memory cache is outdated
@theowl8092 жыл бұрын
good one XD freeze
@wesnohathas19934 жыл бұрын
My sheet keeps flying off in another direction and won't settle in place.
@bigMonkey0074 жыл бұрын
it is not working.... it is always doing something others and it falls through the mattress
@Glowbox3D4 жыл бұрын
Hmm. You have collision on your mattress? Your sheet is set up just like I did? As a test, do everything I did, except just before you subdivide, add a solidify to the plane/sheet. Make it super thin. Then subdivide and turn it into a cloth and continue. Good luck.
@bigMonkey0074 жыл бұрын
@@Glowbox3D Okay, thanks for your help:) I will try again. Wish me luck :D
@sizemccuse2124 жыл бұрын
How did you make those creases
@Glowbox3D4 жыл бұрын
4:57
@maddiewheatley55923 жыл бұрын
When I press play nothing happens. Do you know how to fix this?
@Glowbox3D3 жыл бұрын
Hello Maddie! Not if you followed the tutorial step by step...then I have no idea why it does nothing. Make sure your plane is set to cloth first of all...if it is, and you hit play (space bar or bake), it should react to gravity and fall at least.
@kindman99744 жыл бұрын
So I believe at the time 4:20 I'm not sure how you select the whole face. I can only choose one of the square unit. Any help ?
@alertowl68734 жыл бұрын
assuming you meant to say a edge and not a face, Go to edit mode, hold on to alt, and right click between any two vertices of the edge you want to select.
@Glowbox3D4 жыл бұрын
@@alertowl6873 Yup!
@brittanybedneau55584 жыл бұрын
how do you select creases
@Glowbox3D4 жыл бұрын
Alt click for single edge loop, and shift alt click for multiple selections.
@nib102 жыл бұрын
how do you select all the edges at the same time???
@Glowbox3D2 жыл бұрын
Try Shift+Alt and left click an edge.
@nib102 жыл бұрын
@@Glowbox3D It worked, thanks
@Jack-np9ey4 жыл бұрын
Hey good tutorial! When I bake the simulation and start it, the sheet falls through the mattress and folds in on itself. I have self collision on and collision on the mattress too. Any ideas? Thanks
@Glowbox3D4 жыл бұрын
Hello. Try and increase the quality in the Cloth Quality Steps, as well as the quality of Collisions--up the number to 10. Test it out.
@sushmit26694 жыл бұрын
My plate not bend after collusion it like rigid object
@kindman99744 жыл бұрын
I'm now having an issue with the friction. When I type it to be 20 it just goes to 1 any help?
@Glowbox3D4 жыл бұрын
Hmm, odd. You select the object at frame one (it has no key frames on it), and you make the object a collision object. And then you select 20 friction, hit enter, and it goes back to one?
@RyanChan-ge2fu4 жыл бұрын
@@Glowbox3D yeah, I've had the same problem. I just stopped the animation before the sheet fell off.
@saltyboi24354 жыл бұрын
you need to set softbody and cloth friction to 20
@supakku3 жыл бұрын
@@RyanChan-ge2fu And set a self collision
@pixelgejmri19514 жыл бұрын
hi i have the first comment i see... yay
@Glowbox3D4 жыл бұрын
Nice! Woot. I accidentally had the comments off at first, and just turned them on a few days ago. You still win! Thanks for commenting.
@cheterete50433 жыл бұрын
my sheet inflates when i play the animation, idk why lol
@brittanybedneau55584 жыл бұрын
The sheet keeps going right through the bed
@Glowbox3D4 жыл бұрын
Make sure the bed is set to collision.
@brittanybedneau55584 жыл бұрын
@@Glowbox3D HOW
@Glowbox3D4 жыл бұрын
@@brittanybedneau5558 Follow the tutorial, it's all there! ;) Hahah!
@LpsYcats3 жыл бұрын
@@Glowbox3D I have self collision and the bed's collision on (+friction) but my blanket just transports? Please help
@rockstar7458963 жыл бұрын
What are the specs on your PC?
@Glowbox3D3 жыл бұрын
Hey NTY! My rig at the time was i7 8700, RTX 2070 and 16gb ram.
@rockstar7458963 жыл бұрын
@@Glowbox3D Much thanks, I encountered a speed bump when applying self collisions. My PC runs at roughly .40 fps. I have a amd 3950x a 2080 super and 32gb ram.
@LOSFOUFOUP4 жыл бұрын
Well, that's the sheet !
@PJParan3 жыл бұрын
i thought my conputer lagged. nearly bang the compoter. dont do that! lol
@Madinatubes4 жыл бұрын
how do you erase loop cuts 9:33 thank you!
@Glowbox3D4 жыл бұрын
With C selected, you can middle mouse to de-select.
@Madinatubes4 жыл бұрын
Thank you!
@rustinlu38994 жыл бұрын
thanks for the tutorial! and you are very cute
@maddiemilky30444 жыл бұрын
What.
@Eckholph4 жыл бұрын
what if my sheet collides with an invisible object?
@Glowbox3D4 жыл бұрын
Hmm, the object is set to not-render? It should not collide with any object that isn't set to collision. Why do you have an invisible object set to collision? That could yield cool results, but if it's not what you want, just make sure said object isn't a collision.
@Eckholph4 жыл бұрын
@@Glowbox3D the weird thing is that that invisible object does not exist, i made the first bedsheet, turned out ok, but when i put another, it collides with an invisible plane and i can't erase it
@KrissAtic4 жыл бұрын
5:01 how u select row
@razeenshaikhmohammed37884 жыл бұрын
Press Ctrl + Alt + Left Click
@frankline93783 жыл бұрын
Freeze frame 😂😂
@Glowbox3D3 жыл бұрын
;)
@1cloudytears1cherry183 жыл бұрын
how to go in edit mode
@nikolaskalist67073 жыл бұрын
TAB
@FLAMEalan3 жыл бұрын
Bruh u shouldn’t even be watching how to use cloth physics if you don’t even know the basics... go watch the basic beginner tutorials
@VVSPERS3 жыл бұрын
still always end up with awful clipping no matter what I do.
@Glowbox3D3 жыл бұрын
Make sure you have 'self collisions' on for the cloth object, and on the collision object it self, maybe UN-tic the 'single sided' setting in 'soft body & cloth.' Good luck.
@Glowbox3D3 жыл бұрын
The sheet goes through the mattress? Or the sheet goes through itself?
@alexmattyou3 жыл бұрын
I'm first I thought that youtube strucks 😂
@Glowbox3D3 жыл бұрын
Hmmm?
@s3_Ash3 жыл бұрын
I can honestly tell that you're a bit nervous when your on camera, and it's projecting onto your audience. Try and take it easy matey. You're doing great, everyone loves you.
@Glowbox3D3 жыл бұрын
Hmmm. You've got +5 Perception my friend. It was my first tutorial ever, so I was finding my groove. It's funny, I've been in dozens of films, but I guess putting a tutorial on YT had me noticeably shaken. I'll keep this in mind. Cheers and thank you sincerely.
@s3_Ash3 жыл бұрын
@@Glowbox3D No worries man, I love your videos your one of the few youtubers that explain things clearly, which not a lot of youtubers who do blender do very well. I am very greatful for the content.
@Glowbox3D3 жыл бұрын
@@s3_Ash Well heck, cheers! I appreciate the support. ;)
@ChiminieChimmy3 жыл бұрын
My plane just disappears in object mode 😬
@Glowbox3D3 жыл бұрын
Hmmm--bring everything back to frame one, delete the bake, and start again. ;)
@ChiminieChimmy3 жыл бұрын
@@Glowbox3D thank you I figured it out!
@KrissAtic4 жыл бұрын
MINE BEDSHEET DIDNT FALL
@Glowbox3D4 жыл бұрын
You baked the simulation? You didn't turn off gravity did you? ;) You made sure the sheet is a 'cloth'?
@KrissAtic4 жыл бұрын
@@Glowbox3D yh i did everything u said
@Glowbox3D4 жыл бұрын
@@KrissAtic Odd. It's a quick tutorial. Roll through it two times speed, and start from scratch. It should work.
@KrissAtic4 жыл бұрын
@@Glowbox3D yh its falling now . but bc of low fps when i play the animation the bed sheet disappears how can i fix that?
@Glowbox3D4 жыл бұрын
@@KrissAtic New computer. Definitely. Ummm. ;) Kidding. I don't know to be honest. Delete the bake, and try and re-bake it. Start from scratch. Good luck.