S2000. New cams show a big increase on the dyno over stock camshafts. LOUD VTEC!

[@ChaseDiaz_garage_works]

Mods starting from the intake. >>> Passwordjdm intake Ktuned 72mm throttle body Custom spacer/adapter plate at tb 06-09 AP2 intake manifold cut and ported by SBSPerformance 4Piston cylinder head Full Ferrea valvetrain Urge designs camshafts (stock lift below vtec for a reason) Golden eagle sleeved block .5mm larger bore and 12.5:1 compression pistons. Ballade sports header Gernby exhaust mid pipe HKS 75mm axle back pipe (single) 1000cc injectors pump gas right now (e85 will come later) Walbro 255 in tank fuel pump Radium engineering fuel system components Radium engineering crankcase ventilation Haltech platinum plug in pro (need to upgrade) nothing wrong but I just feel the need to update it.

[@RacingS2000]

How is the k tuned TB? Does it stick

[@RacingS2000]

Or throw CEL

[@JAHgarage]

Nice build! I have a very similar parts list for another stroker I'm building, also have a set of these Urge cams waiting to go in. One question, how did you determine you needed more p2v clearance on the dyno?

[@ChaseDiaz_garage_works]

@@JAHgarage thank you. I have a cam degree kit that I use. I measured all clearances except valve to valve. Plus, I have aftermarket pistons so there was an unknown variable. I had to figure it out. I probably could’ve ran the 0° intake cam angle but I would be around .020”- 030” p2v clearance. Too close for my comfort and was not worth the extra hp.

[@JAHgarage]

@@ChaseDiaz_garage_works ok cool! I have a degree kit coming in this week, wasn't sure if you went through that effort on the dyno. I'm thinking of setting mine up with the adjustable gears while I build the motor, trying to make them a drop in swap on the dyno since i plan on the stock cams for break in. But we'll see lol

[@verothacamaro]

That's some of the best crossover I've ever heard.

[@NicoG575]

The video would be so much better without the background music

[@moustachio334]

Now that's a happy engine. There is a drop of torque in the upper band. I think you could fix that with more cam tuning, but it's a superb build. Congrats. I love the sound of a B or F series engine screaming to 9k. That dyno reads very low. I think you have atleast 270 crank hp or more. The power it picks up at around 4-5k is so much better than stock. People don't realize that the pre vtec lobes have very low lift and modest duration in fact it's pretty much an economy car before the crossover. People are now stupid enough to swap in K series for more mid range but don't even try aftermarket cams first. Thats youtube culture. I could care less for K swapped S's. The record holding S in the quarter mile used an F motor. Variable cams are a moot point in racing. Again, awesome build. With that compression ratio, you'll get an ass load more power when you run e85.

[@ChaseDiaz_garage_works]

Already done my friend. Check this one out. kzbin.info/www/bejne/p162dnpvntirsNE thanks for watching and thanks for the kind words.

[@Wrensspeedshop]

Had to feel quite a bit different with those power increases! Clean setup and good video.

[@Nes_2k]

The bumpstix, I was looking at these recently, they sound amazing good job bro!

[@ChaseDiaz_garage_works]

Yeah they really are good so far. Quality is superb. I’ve had them for a while just sat on getting them tuned and had a couple different variations for trial. Thanks.

[@9kalltheway]

Great video man. Miss my silver AP1

[@ChaseDiaz_garage_works]

Thanks!!

[@TheBb6prelude]

Cool build, I just subscribe. I have a built h22 big turbo build myself. Clean ,clean title 1993 prelude VTEC

[@ChaseDiaz_garage_works]

Awesome man. Enjoy it and be careful! Thanks for the sub!

[@djmyth84]

You are back

[@chucks_garage987]

Those are some good gains! The vtec crossover sounds awesome with the Urge cams. Thanks for the video! Does it pull a lot harder than the stock cam at high rpm?

[@ChaseDiaz_garage_works]

Yes for sure. It’s a noticeable difference. Equally is the sound bbwwwwwaaaaaaaaAAAAAAA

[@eddieh9857]

good update bro thanks!

[@dobleu13]

Ouch saids front bumper, what year is this? I’m confused with that 9k redline 👍

[@ChaseDiaz_garage_works]

This is an 05 with the 2.2. The 9k tach is an EDM cluster.

[@domingoflores2710]

Car still looking good...

[@ChaseDiaz_garage_works]

Heeey! Thanks man. I appreciate it.

[@f80dan]

The crossover 😨

[@ChaseDiaz_garage_works]

It pops!

[@johnlountzis6678]

These are great results!!!With only cams and different tune almost +15ps.Very impressive.The other modes?I can see the pwdjdm intake and 70mm exhaust?Headerback?What about the header?👍👍

[@ChaseDiaz_garage_works]

Just pinned a mods comment. Thanks for watching!

[@oskardayz]

Good stuff chase 👏 👍 👌 💪 🚗

[@ChaseDiaz_garage_works]

Thanks!!

[@darkknight097]

So how long has this been safely revving to 9k? About to tune my ap2 soon and want that 9k redline but it seems most people think 8500 is the limit

[@ChaseDiaz_garage_works]

The engine still runs today. No issues to speak of as far as rotating assembly. Think of all the k series out there with the 99mm stroke turning that 9k rpm or more. The f22 is less at 87mm stroke. I am not sure on the length of rods between the two engines on the top of my head. It’s not a safe rod/stroke ratio to turn that fast by any means for long term usage but aftermarket parts just lengthen the wear and tear. I used to be real cautious about it but I’ve learned to just go with it.

[@surf183]

You in the San Antonio area?

[@ChaseDiaz_garage_works]

Couple hours from there

[@driftx2]

whats with all the scraping

[@ninozepeda7419]

Play the music louder please

[@hansmelgar7752]

Bro how many horsepower?.

[@ChaseDiaz_garage_works]

Made 223 on a mustang dyno.

[@enolamns]

@@ChaseDiaz_garage_works 223 seems low for all the mods with those cams on an ap2. Vtec engagement could be around 3000-4000 rpm.

[@ChaseDiaz_garage_works]

@enolamns You’d have to be from the area to understand the way this particular dyno reads numbers. Not all dynos are equal. Vtec at that low rpm would be annoying. S2000s are near 4k just cruising on the highway. It’s not practical to set vtec that low.

[@enolamns]

@@ChaseDiaz_garage_works man vtec can be set depending on % of throttle..no one drives in vtec at low throttle...you clearly need a better tuner or learn some more stuff

[@ChaseDiaz_garage_works]

@@enolamns wow. You’re judging my intelligence based off a comment and dyno video. YOU clearly have a lot to learn. 😂 Plus, I already said no one drives with vtec that low. I just worded it different and didn’t get into the details. I guess it sounds better when you say it.

[@dritanv]

wow those are some pitiful numbers ur better off walking probably faster too