Audi S6/7 4.0t Downpipe Install. Let the Copart S6 Breathe!!

Please like, comment and subscribe!!!
Also follow me on Instagram @ S4vageperformance

[@Oalco0459]

Keep up the good vids! 👌🏼👌🏼

[@tontsyy]

Nice job! I will be doing this on the driveway to an rs6 soon! I’ve seen people say it’s a 7 hour job, judging your video, a competent tech could shave two hours if not another off that time!

[@michaelcoyle1062]

Thanks man! Have me the confidence to tackle this on my s6. Appreciate it!!

[@devargomackey4159]

Hi could you please explain to me How I Would connect my boost controller to my waist gates on My 2013 Audi A8L 4 L. This is the first mod I'm doing. Next mod will be RS7 modified turbos and a thorton chip Then I am going to add down pipes and complete Exhaust. .... I've been all over KZbin and I can't find 1 video. Where they connect a boost controller to a 4 l A8 S8 S6 or RS7. Need help

[@michaelcoyle1062]

@@devargomackey4159 sorry man. I don’t have the slightest idea. I personally wouldn’t mess with a boost controller. I would simply tune the ECU with a tried and true tuner or OTS like I did with Unitronic

[@waynestevenson6523]

good videos keep it up bradda ..

[@bluemoth1879]

Niceee work...:) 🤟🏼🤟🏼

[@duncan4237]

Good video thanks, does blanking the second lambda (oxygen) sensors keep the MIL (engine check) light off? I have the same down pipes but haven’t fitted yet but love the quality of them 👍 Also meant to say did you notice much difference feel power wise now it can breath? How long did it take roughly ? Thanks !

[@RICHIE_RICH89]

Do some high ass flow air filters too intake work is a must with exhaust.

[@scottnunya2441]

Can't wait to hear it with straights all the way back. I like your approach. Loud as it can be, then tone it down as needed. Are you considering cutouts too? Looks like you have plenty of room under there.

[@evansergio8000]

@Xzavier Noel definitely, have been using Kaldrostream for months myself :)

[@mikhoso]

How is the quality of the downpipes? And do u know if they Should fit on an Audi Rs6 c7 to? RM motor told me they fit. But the turbos on the S is a bit smaller? 🤷🏼‍♂️

[@user-Alhassany]

I got a 2016 S6 from Copart it was listed as run & drive with minor damage to grill and bumper. However the car won’t start at all, makes a whining noise but won’t crank! Does this seem turbos issue or engine gone ? Thanks so much for your videos

[@pooppee8780]

Currently on stage 1 APR, IE carbon fiber intake, IE Xpipe, ecs turbo inlets. This is my next mod however cannot do it due to emissions. Wont pass smog. Also we've researched the power gains of downpipes and saw no gain.

[@stevepryce6738]

Do you think catless downpipe help performance on the 4.0T.

[@ChevSoAmazin]

Question, for you or anyone in the comments; does the RM DPs fit the AWE exhaust without modifications?? iJust bought the AWE and planned to buy the RM DPs.

[@datsuntoyy]

Have you done any catted down pipes for the S6/S7? I'm looking to do mine but I don't want to flag a check engine. Any dyno results from the swap?

[@flossen9014]

I'm looking to get this done to my S7 and I noticed you are in Iowa. Reply if you could assist with where I could get this done!

[@enzodane]

Thinking of doing something similar. How long did this take you?

[@brittjames9288]

What is the size of the tapered end of the downpipe that goes into factory?

[@carlover9764]

All Straight pipe with 3 inch from downpipes.

[@WillieWheels]

Hey I want this done to mine, how can I pass smog after it’s done?

[@alexmanoshin1943]

any dyno before and after? also how you charge to install it?

[@autovmcomposites9997]

What about the engine control lamp? Is there any error because the o2 sensors are not plugged in

[@RICHY3_]

Yes there would be a CEL and it would affect performance because secondary o2's on this car are used for fueling.

[@terrancegordon1664]

Are you located in Florida ? I would like to pay to have this done to my s6

[@devargomackey4159]

Hi could you please explain to me How I Would connect my boost controller to my waist gates on My 2013 Audi A8L 4 L. This is the first mod I'm doing. Next mod will be RS7 modified turbos and a thorton chip Then I am going to add down pipes and complete Exhaust. .... I've been all over KZbin and I can't find 1 video. Where they connect a boost controller to a 4 l A8 S8 S6 or RS7. Need help

[@icomaniakov6339]

Hi this downpipe is it for Audi RS6 605ps?

[@dappadon9006]

Hello what the website for the downpipes? I have a 2015 audi A7.. i been trying to google them without no luck.... plz help..✌🏾👍🏾

[@killer_vette351]

2015 A7 has a totally different motor, 3.0 supercharged V6. Car in the video is a twin turbo V8

[@chaseswanson1256]

I have been looking at the s6s for a while now how reliable do u think the engine are when u up the power ie stage 2 tune or rs7 trubos stage 2 tune?

[@MichaelMatthewThekid]

TURBO FAILURE MOTOR MOUNTS PCV--I believe Audi extended the warranty to 120 miles. Oil lines to turbo fail, DSG transmission ---hmm what did i miss

[@haloboy147]

Is that stock catback with only APR downpipes/ mid pipes?

[@Customwerx]

Caylan Kelly it’s RM motors catless downpipes with stock catback. My previous S6 had the APR downpipes.

[@pumpkinescobar2053]

@@Customwerx which sound better?

[@nicknorth1]

Go here for info on how to remove the pseudo-firewall on D4 A8/S8: www.audiworld.com/forums/a8-s8-d4-platform-discussion-190/diy-access-installing-downpipes-reaching-rear-coolant-bleeder-valve-3017753/#post25582814

[@user-np9co2nm1z]

All I hear is Kermit. But whatever.