Samsung PN43D440 Plasma TV dead set repair to component level

[@johnaclark1]

Sent you a small donation. With two kids in college and the holidays in full swing, funds are a bit tight or it would have been more but your videos (and a couple of timely YT replies to questions) have helped me fix my Sony SLV-798 VCR with an eject problem and also my wife's 20+ year old Oster 4811 breadmaker. My wife loves the breadmaker but it developed a problem where it would just intermittently shut off at random times during the cycle. I've looked at it a few times and even replaced all the caps (a couple tested on the edge according to my Blue ESR meter) but could never figure it out since it was intermittent and random. Watching you inspect solder joints and finding so many bad ones I decided to give it one last shot with a magnifying glass on the boards. I didn't find anything obvious but a few that looked a bit cold. I reflowed a dozen or so connections on both the power board and the logic board (the worst one on one of the display connections) and put it back together and I'll be darned if it didn't fix it. It paid off with fresh dinner rolls for Thanksgiving! I only recently found your channel and have been watching all your videos lately. I really appreciate what you do, and how you do it, Dave. Thank you!

[@peteb2]

Thanks for the redo. It's a valuable show & tell on the process involved in dealing with this kind of appliance and as a tech a reason precisely why i will forever put big flat screens with mobile phones on my dare to-never-do list.... You're a bigger man than me taking stuff like this on. Welldone sir!

[@randygentry2724]

I watched the original video when it was posted and then I watched this video. I am totally amazed that a video can be demonetized after this long period of time. Seems that content creators are going to become scarcer and scarcer if these totally ridiculous type of hits continue. It has happened not only to you but to many of the content creators that I subscribe to. I have been wanting to start a KZbin channel for quite a while now but it is very hard to come to a decision as to whether it would be worth it from a monetary viewpoint and just a plain pain in the neck viewpoint. I would love to help others without worrying about being beat down by KZbin at every intersection. Aloha

[@12voltvids]

It wasn't de-monetized. They were still running ad's, they just redirected the ad revenue to the claimants. That's the way it works.

[@randygentry2724]

I see, maybe demonetized was the wrong term for me to use but the end result was the same in my mind. They took away your ad revenue and sent it elsewhere. The hardest part about this is that they did not do it after 1 week, or 2 weeks, or 30 days, or 60 days or 6 months , or 1 year, or 2 years, but 3 years. This is a really helpful teaching video and in no way was anyone paying any attention to the actual content of the 12 seconds of video in dispute. What we were paying attention to and what was significant was that the video actually appeared on the screen indicating that the repair was completed. I mean, what next??? Aloha

[@randygentry2724]

From what I can see, you need to record some of your 4k trip footage and put that on your video screens whenever ANY video needs to be shown so that it cannot be busted. Just make sure there are no signs or billboards in background with advertising or corporate logos on them(or even buildings with corporate names or logos that will stay in frame for more than 1 frame) because you never know. I would say continue to use royalty free music but you never know when someone will claim that the music sounds very "close" to music they composed or the lyrics are "near" to their lyrics. Kind of hard to breathe these days without someone complaining. Aloha

[@12voltvids]

That is what I have been doing. I use my time lapse footage as I did in the Benq speaker demo video. When the footage for this video was shot 3 years ago I had not completed my project. I have tons more time lapse stills to go through. Spent a 10 days touring Utah, Moab, Arches and Canyonlands and grand canyon with my still camera and intervalometer shooting literally thousands of images for time lapse movies. Just have not processed the images yet as they were shot 8K RAW image.

[@andrewcottrill3248]

Hope you get plenty of views! Good luck & keep going - I always enjoy your vids...

[@12voltvids]

Need lots of views.

[@patrickjmorgan]

Sorry to hear that Dave, even though I watch all your vids to learn. What’s annoying is that the tee-shirt with the ‘Have a nice day’ logo and made a few bucks out of someone else’s efforts wouldn’t have a clue what flowsolder was and if asked, would probably think it’s a cocktail.

[@riesling4007]

Suggest we all float Dave some money. It only takes 70 people donating $20 to compensate for this loss. Consider this: Fran from FranLab recently raised tens of thousands of bucks just to move her lab. I don't want to compare her directly to Dave (or diss her, for that matter!), but Dave's videos actually help me to fix devices and gadgets which I would have to chuck into the bin otherwise. And I think I cannot say this about any other youtuber doing electronics stuff, including the very famous ones. Donated $25 on top of my Patreon support.

[@AThreeDogNight]

Thank you so much, that is a great idea. But how do you donate? I've not a clue.

[@riesling4007]

@@AThreeDogNightJust go to Dave's channel main page (click on 12voltvids under the video). You'll find the paypal.me button there. The rest is self-explanatory.

[@riesling4007]

@@AThreeDogNightDirect link www.paypal.me/12voltvids

[@JacGoudsmit]

Join the Patreon page for 12voltvids too. www.patreon.com/12voltvids/overview

[@AThreeDogNight]

After 3 years is such BS!!!!!!! There should be a time restraint as to how long, say 1 year, if they have not caught within that time then it should not be allowed. Of course after XXX amount of views as well. So when I watch you on my TV does it still count as a view? I would hope so. Hopefully you get it all back. So how long can we re-watch this? Is there a time limit is what I'm asking before you can get your money back. If I wasn't disabled I would certainly support you because you are the ONLY you tuber that I have learned so much from. Keep up all of the great Vids. & I'll keep re-watching this one until I puke. Then I'll watch it some more.

[@RoughJustice2k18]

I hope you get lots of views on this and other videos you post. I learn a lot from these, including how shrewd the "copyright police" can be.

[@RomanKrijgs]

Dude ur amazing From Holland And watch all repair movies u do. First successfully repair my nad amp. Secondly The philips with faulty coolant paste. Keep. On going 👍👍👌

[@walker55able]

Please keep going with your expertise I really do appreciate. them.Thank you very much. Keep the faith!

[@Hi-Tech-Ray]

I enjoyed the video recap.... If one finds theirself coming across boards with surface mount components, would it be wise to invest in a hot air station? I also think that you could use comptom tape to isolate areas where heat isnt needed.

[@cosmolv]

That's not KZbin, but peoples who make these claims. Hope this video brings back what you lose. Keep up the good work. 👍

[@12voltvids]

On the bright side, the new version is better than the original.

[@ICStation2013]

Hope you get lots of views! We'll share this video with our fans in Social Platforms. Hope it will do some help.

[@AThreeDogNight]

Thank you IC Station, you are good folks.

[@davidkgame]

Shared in The IT Tech Support Community (Pro's only) group on FB and will pass it around others if I think they'll actually watch it. KZbin take this piss sometimes with their policies.

[@budandbean1]

Bunch of jerks... They know exactly what they are doing. It’s also too easy for them to do this. 12-seconds of anything shouldn’t constitute a copyright claim, total BS...

[@xnotx2]

Yep, too bad he couln't counter with... ok, you owe me with 3 years of advertising fees for promoting your product/service.

[@budandbean1]

You’re right... I wish there was someone we could call to tell them to leave our favorite guy alone! (And they’d listen to us) Taking his money is pure BS!

[@j.zingler6735]

In Germany usally up to 30 seconds are free of copyright and count as sample. But we have codified law here.

[@12voltvids]

I hear you there but that's the way the ball bounces. When I first posted this I didn't consider it to be something that would be hit because it was a semi video by studio that was shown for 12 seconds and I didn't try to conceal it. I even had the bug on the screen. It is the shot that first comes up before I distort it.

[@j.zingler6735]

@@12voltvids www.loungev.com/copyright/ Those guys? They are anonymous. Not allowed in the whole EU, thats for sure. And well, you are in Canada? Or did they complain directly to yt?

[@THEtechknight]

Dont feel bad, they pulled my monetization last year because I didnt make "enough" videos to keep in the criteria. So I lost monetization on everything. I uploaded some older content I never got around to just afterwords, but eventually stopped making videos. In your case, if it took this long, that means people are starting to take notice of your channel getting more and more popular each day. Thats when the "hate crew" start coming out.

[@EMTdrummer]

Doing my part!! Maybe I'll watch it again too... I wonder how much the parts replacement kit costs..?

[@AThreeDogNight]

It was up there, about $25.00 bucks.

[@12voltvids]

@@AThreeDogNight I was waiting for someone to ask the price of the parts kit.

[@AThreeDogNight]

@@12voltvids I know it right? LOL.

[@alanarmstrong2323]

Thanx teach hope all works out well !

[@Ochibason]

Thank you for the redo vid. Going to be opening up my 60 inch Samsung plasma 2010. Was running fine then one day yes had the speakers up full and set went blank. The red power lite is still on in front lower left corner but remote does not turn it on. If I un plug the set wait 30 seconds a min it will do its normal click click click and red lite flashes but does not chime or turn on. Any suggestions off hand top of your head? The red lite then is on steady and again remote does not turn it on. Only unglugging the tv from the outlet and waiting a bit does the clicking cycle but no chiming and shuts off.

[@mikeh2520]

Happy to rewatch to get you paid. Maybe you can help me with my Samsung TV. It's a HP-T6064 Plasma that I replaced the Y buffers and repaired the Y sustain board. It works OK now but the colors look muted. Power supply voltages are perfect and I tried to set the Y sustain according to the O-scope picture in service docs but could not get anything remotely close to trigger and O-scope. Another thing is that I have heard SNAP sounds from the TV a couple of times.

[@riesling4007]

I‘m speechless! This KZbin copyright madness is ridiculous. I‘ll float you a Paypal.me donation tomorrow. It won’t make up for such a substantial loss, of course. But at least this scandal is a bad reason to watch a good video again. Keep up the good work. I watch and like all your videos. You got me started on VCR repair, which has become a major hobby of mine.

[@SingapuraTreasure]

stay awesome always. enjoyed all your vids.

[@borisdg]

KZbin is becoming the worst platform for creators...

[@12voltvids]

I was actually in the wrong here. I let a clip play longer than 9 seconds. What ticks me is the 3 year delay.

[@12voltvids]

Not true. There is no other platform. Seriously. Nothing else even comes close. If there were other platforms that creators could make as much money as they do on youtube we would be there. Sure if you just want to share video and have no interest in making an income from it then there are options, but as far as shear size goes and bang for the buck, nothing comes close to youtube. I'm not knocking youtube, I am pissed at myself for allowing a 12 second clip to show. Today that would never happen, but 3 years ago I wasn't thinking a 12 second clip would be tagged.

[@theanimatronicscollectoran4193]

In the past you could upload everything without being caught.

[@TheGuitologist]

A 19-second YT video? You mean they took all the revenue from your original video? How?

[@12voltvids]

The rights holder to the visual content, in other words the photographer or his clearing company filed a claim that I did not have the rights to use those images. As time lapse are considered single images the 9 second rule doesn't even need to apply legally. A single image is all that it takes. I had other videos in the past where I used what I thought were generic public domain clips, and they turned out to be copyrighted worldwide by the BBC. So they made a claim, and siphoned off all the already paid revenue. I know this because when youtube paid me I was short what that video had made over it's lifetime. There is no challenging it, because they already did a manual review, so challenging could leave a permanent copyright strike. The only permanent solution is lick my wounds remove the offending clip and start over. There is NO recourse. On the other hand, I discovered that someone had stolen some footage I had shot many years ago and placed it into their own video. When I discovered it, I was an even bigger prick I had their account hit with a copyright strike, and had the video taken down. Now had they monetized it I could have requested the revenue, but it was a non monetized video of mine that they had stolen the first 6 minutes of, frame for frame. They changed the music, and had another announcer re-read my script also word for word, but they extended the video and made it longer. It was actually done by my competitor. The company that hired me to produce their video was bought out and they changed the name of the company (but not the name of the product) took my video which they had on DVD so the quality was good, took it to another production company even though it had my name all over it, added a new shots from home video and then published it, and posted it on the BC safety counsel website and youtube. Here is the link to my original that I had to upload to youtube to prove it was my content. kzbin.info/www/bejne/gmLcoIGPo9yEjJY

[@jorno1994]

The copyright system is pretty atrocious.

[@12voltvids]

This wasn't caught by their bot. That would have happened when it was uploaded. Someone at loungev studios made a claim, and took all the revenue. So I am in the red this month. It blows for sure, and leaves a bad taste in my mouth, but if the new article 13 copyright laws of the EU are enforced a single frame shown can get you hammered. I am quite pissed as of now for this to happen. It was 12 seconds of their video playing on youtube in the background. 12 fu##ing seconds.Give me a break. On the positive side, I re-edited the original footage, and made it better, cutting crap that should have been cut, and doing proper voice overs when the audio was bad.

[@AThreeDogNight]

Dave can you please put up a link to show me how to where I could help donate some money to you. I pulled up your home page but don't see anything on it. Views keep climbing, that's great, everyone is helping out the best they can.

[@12voltvids]

PayPal.me/12voltvids

[@AThreeDogNight]

@@12voltvids OK, thanks Dave, my blind butt finally saw it at the top. Sent $20.00 bucks so I hope that takes a little sting from out of this. Also the first time I've ever given to anyone on you tube. Keep up all the great vids.

[@SeersantLoom]

I'll choose donation. Actually, just did it. Hope some european rupias will help your wallet. Why feed the not-so-nice middleman (YT)?

[@AThreeDogNight]

Dave can you please put up a link as to how we can donate a little to your channel? I've not a clue, I pulled up your home page but still do not see how. Thank you so very much.

[@mrpedrodrodriguezsr7628]

You Tubers should unite and stop this from happening again ! If a claim for copyright infringement isn't filed within a year that claim shouldn't be valid. They clearly waited until the video was monetized enough to file their claim! Point this clearly to Google .

[@chauffeurmarco]

I wasn’t expecting that kind of hot air station.

[@12voltvids]

LOL, I guess technically is IS a hot air station isn't it?

[@autolancegega599]

Have you ever repaired industrial VFD's, UPS ?

[@brucejoseph8367]

KZbin, (Google), Amazon, Apple, all the same they make wholly unfair decisions like this and you have no right to appeal whatsoever. I hate it when companies are so big they can do what they like. Louis Rossmann's KZbin videos have opened my eyes about Apple's underhand tactics with regard to third party repairs of their products.

[@alcappel5724]

I just subscribed. Great video! You are very articulate and knowledgeable about plasma tvs . I recently acquired a Samsung model pn43f4500afxza. Everything seems to work fine except it power cycles about every 10minutes when I play over the air tv. It never does it when I use it for a monitor via HDMI. Could this be the main board? Or something else maybe. No capacitor bulging or any obvious signs of burn. Your suggestion would be much appreciated. Thanks

[@12voltvids]

Check for a firmware update for the tv. I am not a plasma expert by any means. I have fixed only about a dozen or so plasma TVs in my life. About the same number of LCD sets.

[@HDXFH]

I may just try this repair kit, as i said i got a very similar TV but sanyo branded

[@12voltvids]

This one is specific to this TV, but considering that only 3 companies made plasma TVs, Panasonic, Samsung, and lg. Pioneer made them until 2008. Hitachi and nec made plasma in the early 2000s but I wouldn't expect many of those ones to still be around as they were not even HD back then. Hd plasma didn't appear till mid 2000s and those were 720. The 1080 plasma didn't appear till 2008 and all plasma sets were done by 2013

[@VioletDragonsProjects]

Great Videos. Sucks that your video was copyright striked im attempting to repair a 17IPS61-3 Power Supply which theres no Power or Standby common problem is the diodes its my first ever repair like this.

[@12voltvids]

It wasn't striked. That would mean a take down. The claimant just claimed all revenue. This is the second time the same people, loungev has hit me. The other time was on the Sony slo30 beta1 portable deck. I recorded a clip from same video and played it back. I had to re-edit that one over a year ago, and put the original one on my patreon list so members can see the unaltered version because I was showing off beta 1 quality

[@VioletDragonsProjects]

@@12voltvids Apple did the same to me awhile ago but they striked my video had to take it down which sucked. KZbin has tightened up the whole ad revenue.

[@12voltvids]

Oh yes I am well aware of this, as is everyone that creates content.

[@tomdewey9907]

That is totally had to believe that YT or some troll came back after all these years and claims a copyright infringement.. A sad state of affairs with YT. :(

[@budandbean1]

Just curious, what constitutes a “view”? I mean, if I watch 500 times plus advertisements is that 500 views?

[@12voltvids]

Yes basically. Whenever a video is played and the advertising streams for 6 seconds that counts as a view. Except I can't watch my own videos. When I log in to reply for example my views don't count.

[@budandbean1]

Great Thanks, so I’ve got in about 16 views then and will continue. Can’t see myself being able to do 100k though, sorry.

[@DrDroogkloot]

What if you log out of your account and start watching your video’s.

[@ArthurJS123]

Is it even cost effective for the owner of such a set to have repairs done to it? My understanding is that the current models of televisions are all disposable items.

[@12voltvids]

They paid me 100 to fix it. Plasma lovers love their plasma sets.

[@ArthurJS123]

12voltvids I’ve given up on the constant upgrade merry go round. Thinking the landfill business will be a great one to get into soon.

[@12voltvids]

Or the recycling business. Yes it is a joke these days. Buy something use it for a year then toss it and get another one.

[@rockyi1969]

Great job, really it was really helpful. Thanks and God bless you.

[@infinitecanadian]

Where did you say you got the parts kit from?

[@adamsersen]

Love your videos.

[@walker55able]

Brilliant! Thank you

[@Chupacabras222]

There are hundreds of components on that board. How did you figure out which ones are actually failed? That's the crucial question. Replacing components is the easy part of the job ;)

[@12voltvids]

I looked for the largest ones and started testing. Once I found that the igbt had failed I did a little research online and found a service kit was available which contained the 4 transistors and the drive ic. I didn't test the drive ic so I dont know if it was bad but it was in the repair kit so it got changed. Considering that there was a service kit tells me this is a common failure mode for this set.

[@allenswanson2423]

What make/model is your soldering iron?

[@gartmorn]

It's absolute bulls**t but does go to show the kind of litigation obsessed society we live in! Open source developers still seem to make a profitable living which shows that it's purely greed on the part of these companies! I could perhaps understand if you were showing sizeable chunks or whole videos but this is just ridiculous!

[@user-ko2cd8wt7y]

Is the piece of carpet on the bench ESD approved?

[@12voltvids]

Sure is. 100% nylon.

[@stphinkle]

Maybe use one of your own videos as a screen test or use some video that is licensed under a Creative Commons license as a test? It will be hard for them to argue copyright if it is one that you own or one authorized to freely share!

[@12voltvids]

This video was under creative commons use when it was done. The video was done 3 years ago when these videos were all over youtube. Then they decided to change the rules and require a specific license to post on any social media site. That is the problem I have with this. If you go to their web site now they are very specific, but that wasn't the case 3 years ago when I did this video, and the shot of their video was playing in the background off youtube. My more recent videos I have only shown my work, but what am I supposed to do with the old ones? Re-edit them all? The first 9 seconds is fine, it is after that that they nail you, and I had a 12 second shot. This is where it gets sticky, because they allow public display of their videos in retail stores (demo for TVs) doctors / dentist waiting rooms and in your home for free, but to post a 12 second clip in another youtube video requires a special license? What is the "special" licence you wonder. It is that they monetize the video and take 100% of the revenue. Now for someone that doesn't monetize their videos that might be ok, but I on the other hand do monetize my videos, and if someone else is going to make money on my content, and 99.5% of that video is my content, then the video is not going to stay online.

[@stphinkle]

12voltvids I would contact Electronic Frontier Foundation and explain this situation and ask them to write a letter to KZbin over this. If you are clearly the copyright holder of the video you created the system should not be flagging your own clips used in another video you post.

[@12voltvids]

The clip that was picked up my the camera on this video was not my content. It was a video playing on youtube, a scenery video, that 3 seconds too much played.

[@garrygemmell5676]

Great videos i am learning a lot thanks!

[@crankjazz]

Wow! Someone claimed for a 12 second usage? That's ridiculous!

[@12voltvids]

Might have been 13 seconds but we are splitting hairs. It wasn't blatant copyright infringement where I posted someone else's video, I had a clip that was from youtube playing on the screen for a few seconds while I was talking about the repair. The studio's logo was showing, I wasn't trying to pull something, but they have their policy. You can download that video and have it playing as an ambiant video in your doctor or dentist waiting room, or your yoga studio for that matter, but include it in a youtube video and they want a licence fee. Don't pay them for that, then they just file a claim with youtube and take the revenue.

[@crankjazz]

@@12voltvids wow.

[@gusybuck69]

hi have a plasma tv with line going up and down some color to them. Samsung PN50A450P1D how to fix this please . thanks

[@12voltvids]

Vertical lines are an indication of panel failure. Can not be repaired without changing the panel and you will never find one. So watch it till it dies and get a new set, or do what I did when one of my sets did that. I moved it to my bedroom and use it just to watch the news on the 2 red lines I don't even notice because I see all the still graphics the local station plasters all over the screen that has burned into the remainder of the screen

[@MrScottcollier]

While the letter of the law here was followed, the spirit was not. Kudos to you, and a steaming pile of s%$* to the parasitic ploy by the other party.

[@zx8401ztv]

It's a bugger that all the money has been claimed, but 95% of the video is your work. Where is your cut of the money, very unfair.

[@markmarkofkane8167]

KZbin can be so fickle. I noticed you said that plasma has a better picture than LED TV.(in another video) Is that always the case? If so, why do people settle for inferior displays? P.S. I want a heat gun.

[@vk3hau]

what a a$$#0L3, I rewatched twice so hope it counts.

[@12voltvids]

That counts.

[@riesling4007]

Everybody plz install Tor browser and watch this vid over and over again, changing your identity in between.

[@EastCoastScott]

why don't they do around and delete all the accounts that people create and then use other people content as their own. I just blasted someone the other day for doing that. He were are watching videos that a lot of work was required to create and some ass would put in a copyright claim and google listened for a a 12 second of image in video when he's so careful about copyright infringement....It comes under FAIR USE......all kinds around. Sad as these videos are excellent

[@HDXFH]

Very similar to a one i have

[@gs-mt8zd]

KZbin has gone from such a great platform to a big business that's all about money and some people and companies snag it from whoever and wherever they can because of the big business sympathies of big business youtube and as usual the small guy pays. Just ridiculous!

[@JacGoudsmit]

I hope you appeal this, and get your revenue back because that was absolutely fair use. But I also suggest you make more use of Patreon for your channel. I understand it takes more work to do things like giving Patrons early access to your videos (and basically having to release videos twice because of this) but I've been hearing various Patreon video makers say that it helps them stay in touch with their fans, and it gives them a fixed (or at least predictable) amount of income that can't just be taken away by some thieves that wait 3 years before putting in a bogus copyright claim. And releasing the videos to a small group of dedicated fans helps to catch mistakes in the videos too so it saves you work having to answer stupid questions in the comments. (For those who don't know, 12voltvids is at www.patreon.com/12voltvids/overview)

[@12voltvids]

I have a patreon account, and have done the early access, and even patreon only releases. There are several in there now. Whenever I bring it up the trolls get going, some even have gone as far as phoning me on my business line.

[@12voltvids]

As soon as I mention patreon I get a huge backlash from the resistance and loose subscribers. I do have patreon only videos and will be releasing more and releasing longer versions of existing videos putting in deleted scenes. More of my time lapse travel videos for example will be patreon only because these are not huge draws as far as views go, but I do have a steady following on those.

[@crumplezone1]

People do `unattended Views` to help 12v :)

[@EldaLuna]

just shows how shitty life is getting, censor ship copy right crap. this site might as well shut down as there is no point to be here anymore. hell might as well get rid of the internet and go back to records and day time cable crt tv's. anyways nice work on that. make soldering look so easy.. something i still cant seem to get a hold of.. but alot of it is im scared to burn the parts if i leave it on to long i don't know tolerances or sensitivity to such things. like when i had to solder a new battery to a gba cart for the saves. i got the chip and data around it so hot could burn ya self i thought i killed it. and normally it would as some sources i found how to do this from said. but i got lucky but one day i feel i wont be.

[@timbeck7436]

What a bunch of baloney. 3 years? Sorry you had to go through that. I’d say more but don’t want to get you demonetized. Hope everyone watched this one.

[@hubzcaps]

That transistor fleww boi lol

[@theannoyedmrfloyd3998]

Can't you file a counter claim?

[@12voltvids]

I could and I would loose. I mean I could be a dick and do the same thing if someone hijacked my videos. Wait a minute someone did. I filed take down notices and had their channel shut down. That was when someone copied and reposted over 100 of my videos on their channel. They were not monetizing them, but if they had and they had thousands of views I could have done the same thing. But in this case (this video) it was 12 seconds. It isn't like I put up their entire video. I had 12 seconds showing on the TV while I was talking. I am much more careful now and only use time lapse footage that I have shot on any TV i am working on.

[@leonjohnsonjr3331]

did u update the firmware after doin this

[@12voltvids]

It was current.

[@leonjohnsonjr3331]

@@12voltvids I found the whole board on eBay for 17 bucks put it in and works great I fix about 5 of these sets

[@timka880057]

They're thieves man!! You're servicing things not trying to steal. That's just mean!, Rotten and lowdown! If anyone could stoop so low, they have..... pisses me off.

[@DeadKoby]

I guess next time it's a good idea to show your own KZbin video on the screen... or a generic test pattern.

[@xnotx2]

Careful you don't knock off a near by resistor................. whoooops lol

[@12voltvids]

Notice I didn't skip a beat and stuck it back on before the solder even cooled.

[@xnotx2]

@@12voltvids Could have been worse, could have got stuck to the iron tip!

[@AThreeDogNight]

@@xnotx2 I noticed that but he was so dang fast at putting it back on that it was hard to catch.

[@jacquesbadenhorst3613]

Im all for copyright claims that are justified. if you BLATANTLY copy work then you should not be entitled to the revenue especially without due credit. in your case, that 12 sec clip can be worked out as a percentage of the video based on time and then if you had no audio on it another 50% removed as a credit due to the claimant. if they claim 100% of the video they also claim your audio and video as their own???

[@chauffeurmarco]

I never put anything on KZbin, I don’t understand all the copyright shit.

[@chrisvinicombe9947]

Wretched copyright weebs strike again 😤 we need a new platform

[@srtamplification]

Total BS

[@che1602]

I love KZbin but I hate KZbin.

[@4clive]

Says 'bullshit', gets demonetised.

[@DrDroogkloot]

Just use something from my channel.

[@chartfix]

ridiculous claims. people are really completely f......up. Jealous !!!!

[@Natures_Intentions]

this copyright crap is getting old fast.

[@12voltvids]

Believe me I am getting fed up with it. Had to spend all afternoon reworking the video so I can try and make some money instead of producing a new video for a couple of DAT machines I repaired. Total waste of my time responding to this bullshit.