Samsung RF267AERS Display Temps are not updated

[@sidowsidow]

did you get solution ?

[@bens2058]

I had same problem. Tested resistance of sensors, all good. Reset it many ways with unplug/plug, fridge and freezer door switches, buttons...Error came back. Changed the control board and it works well now. Seems the EEPROM of the original board just went bad? Without a way to connect the board to a computer for diagnostics, I guess I will never know. Refrigerators are so electronically complex now that we need regulations to make their computers user-accessible for error scanning and troubleshooting, just like cars.

[@joegonzales4749]

Where is the control board on that model? I don’t see it on the back of the fridge. Nothing to unscrew other than at bottom where compressor is

[@NelsonjavierVillarrealga-ui3ui]

Tengo esta nevera arriba emfria pero en la parte de abajo no congela

[@clhall747]

did you find a solution to his problem? I'm having the same issue. If I unplug and then plug it back in and initiate power freeze it will lower the temperature but it always goes back to showing the wrong temp.

[@richardchaberek2]

Try this, hold the door open and press energy save and lighting at the same time to reset DOOR HAS TO BE OPEN

[@kameron4094]

We’re having the same issue but it’s not resetting

[@dianawebb340]

This reset mine

[@Qwaziop]

My name is joed Rodriguez

[@williamcalabrese2022]

Its a bug in Samsung software! Set it on 34f and all should be good, but it will fluctuate between 35.5f to 45f, sorry temperature will never match on Samsung French doors refrigerators software issue they never own up to!