Samsung washing machine not turning on - System reset

Help support us by buying Merch!
teespring.com/...
Visit our Amazon Affiliate store, as an Amazon Affiliate, I earn from qualifying purchases.
www.amazon.com...

[@DIYwithMichaelBorders]

Second alternate reset procedure. kzbin.info/www/bejne/pmq1qKOAbcmprZosi=KVZkti7RV2k6a2sa Help support us by buying Merch! teespring.com/stores/diy-raptor-club Visit our Amazon Affiliate store, as an Amazon Affiliate, I earn from qualifying purchases. www.amazon.com/shop/diywithmichaelborders?ref=inf_own_diywithmichaelborders

[@RRaj-ig8us]

thank you, I will try that method, really hoping it works

[@DIYwithMichaelBorders]

@@RRaj-ig8us 😁👍

[@cicicorleo]

Should be illegal to sell Samsung appliances in the United States. They can't even make it on one consumer report of good quality.

[@DIYwithMichaelBorders]

@@cicicorleo Thanks for sharing your thoughts. Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@lisatolliver2866]

@@DIYwithMichaelBorders I tried the reset.at first,my washer was only stopping before the end of the cycle with the lights flashing. After the reset you described, now it won't even turn on!

[@dnrasf]

Dude I literally just bought a “broken washer” for $50 and your video just fixed it. This is crazy thank you so much!

[@DIYwithMichaelBorders]

Now that’s amazing!! 😁👍 We call that a WIN! We appreciate you sharing this and reach out to us any time! Let us know if you have any questions and hey if you’re into crypto trading, check out our newly launched DIY ecosystem. Toolboxtoken.com We DIYers need to stick together! 🧰

[@michaeledwards4107]

Michael, you just saved me. My Samsung stopped during cycle, top lid locked and when I power cycled, I had nothing. Your reset worked. This particular washer had a recall within a few months for top lid blowing off and it was so widespread Samsung hired Dish Network techs to install a 'fix'. It's under the 5 year 'secondary' warranty from my retailer and they couldn't get out till next week and I still would have to pay a service call. I'm considering just buying new. Thanks!!

[@to9y]

my man! may God bless you! I'm living in a city called Pune, India, for work. All the technicians, manual laborers etc. (long list!) that i hired here so far were absolute crooks.. today my machine stopped working, and i was dreading going through that feeling of being cheated and disgusted yet again, but thanks to you, i didn't have to! subscribed!

[@DIYwithMichaelBorders]

Thanks for watching, we are very happy to hear our video helped you alleviate a stressful situation. Hopefully many stress free days ahead for you. 👍

[@rjlavoie]

That moment when your clothes are in the washer and it won't turn on was like OH NO! Thank goodness an internet search of the problem pointed me to your video. It worked. Thank you. You now have another subscriber.

[@DIYwithMichaelBorders]

Good morning Robert, welcome to the DIY Raptor Club. We are happy to hear the reset procedure got you back up and running. We also appreciate you subscribing, we subscribed to you as well. Let us know if you have any questions, keep in touch. 😎👍🔧🔩

[@joancostello949]

Thank you

[@jackassofalltrades2126]

You saved me a very long day of work exchanging a brand new washer. For some reason mine didn’t turn on after the reset for another couple minutes but it’s washing now thank you

[@DIYwithMichaelBorders]

Thank you so much for sharing your experience as well as your (Super Thanks). This means the absolute world to us, no joke, THANK YOU! 😁 Great to hear you’re machine is back up and running, and awesome job making it a DIY project. Definitely allows you to return to your remaining weekend fun. Please reach out to us any time if you have any questions. Thanks again. 😎👍

[@cjhtas]

brilliant and so simple. I'd searched for a service manual, pulled out the main board and was about to delve into the circuit but I had another look on KZbin first. Fixed it straight away, saved $$$ and lots of frustration. Thanks.

[@DIYwithMichaelBorders]

Good morning, that’s great news!!!!! Thank YOU for sharing this and awesome job making it a DIY project. 😎👍

[@kategould6946]

First video I clicked on after my washer would turn on. You are a star - fixed my washer in no time, thank you!!!

[@DIYwithMichaelBorders]

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. Very kind of you to share, thank you. Great to hear your machine is back up and running, makes for a great start to your upcoming week. 😎👍 Let us know if you have any questions.

[@shaunbeaulieuxc90v87]

Thanks man, my father was mad as hell that the washing machine didn’t work, tried the factory reset and works great

[@DIYwithMichaelBorders]

That’s awesome, your Dad feels a lot better now hopefully. 😁👍 Nothing better than making your parents proud.

[@rebeccaberggren3769]

Thank you! Excellent advice! I've spent an hour on Samsung's help site and there was nothing so thank you very much!

[@DIYwithMichaelBorders]

Great to hear our video helped. Customer support can definitely take up some of your valuable time. Thanks for watching Rebecca.

[@tims4472]

It took me looking at countless videos and finally seeing this video to help me clear the sud error from my washer. Thank you !

[@DIYwithMichaelBorders]

You are very welcome, we are honored to read this. Let us know if you have any questions. Looking forward to 2024, many more helpful videos to come! 🧰

[@lorihenderson9686]

Thank you very much for the help! Are you a part time DJ too? Other repair videos are a total snooze fest. Your delivery of information is quick painless and best of all correct!! EXCELLENT JOB!!!

[@DIYwithMichaelBorders]

Good morning Lori, thanks for watching. We appreciate you sharing your kind words. We do our best to get to the point & not waste our viewers time. We are always here to help answer questions. Hope all is well with you and your family Lori, enjoy your upcoming weekend. 😎👍

[@kirstenforshew5366]

Lori I agree with this ! Nice happy delivery !!!

[@lindazomparelli672]

Thank you for making this video!!!! It worked perfect. You saved me a lot of money. The manual states absolutely nothing about resetting the machine. Believe me I am so thankful, cause I never leave a comment on videos!!!!!

[@ghostynicole2437]

Thank you for the best advice and for free. No need to pay for a diagnostic.

[@michaelmacpherson]

Thank you, Michael! Worked just great. Had a severe thunderstorm just before it started misbehaving and finally just would not power on. Thanks again!

[@DIYwithMichaelBorders]

You are very welcome, we really appreciate you watching Michael. 😎👍

[@katabos83]

God bless you man. I was crying already but then I found your video and it worked. Thank you 😊

[@DIYwithMichaelBorders]

Good morning Kat, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. You are so very welcome, thank YOU for making it a DIY project and getting your machine back up and running. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem. toolboxtoken.com Reach out to us any time! 🧰

[@nealberkowitz8408]

So my DC68-03172C stopped mid cycle and the Samsung manual was useless. I tried several times to start it again. I unplugged the washer and did the steps and it worked. This machine is 3 months old and I was not pleased. But again these steps worked. Thanks again.

[@DIYwithMichaelBorders]

Great to hear, thanks for sharing this Neal. 3 months old, it definitely shouldn’t be giving you any troubles. Has it experienced a power outage or something out of the ordinary.

[@izzi1s]

I bought a 3 year warranty and was just about to call for service and then I saw this video. AWESOME!!!

[@DIYwithMichaelBorders]

Sweet, we are happy to hear the video helped. Reach out to us any time!

[@IsaacEasley-wn8ln]

Just had new washer delivered. Delivery crew did not perform test run, advised me to do a run myself, then left. I pressed the Power and Start buttons on every cycle and washer would not start. Samsung Support was unable to help. Advising they would send a technician to troubleshoot the washer within 7 days. Long time to wait with a large family and lots of laundry. Came across your video. Followed instructions and guess what, it worked. Thanks for you help.

[@DIYwithMichaelBorders]

Awesome, thanks for sharing this and congrats on the new washer. A quick reset does wonders. 😁 Great job transitioning to making this a DIY project. Enjoy that rewarding feeling and the cash you saved. Let us know if you have any questions and hey if you’re into crypto trading, check out our newly launched DIY ecosystem. Toolboxtoken.com Reach out to us any time. 🧰

[@IsaacEasley-wn8ln]

Thanks for posting. Now I'm wondering what to tell the technicians when they arrive.

[@DIYwithMichaelBorders]

@@IsaacEasley-wn8ln Happy to help. 😎👍🧰

[@julesdavenport2032]

Wow..worked like a charm...we couldn't even find the reset in the manual. Thank you!!

[@JA-eq6ou]

Thanks for your videos! I watched both this system reset and the breaker videos. Unfortunately neither worked, any other potential solutions?

[@swamification]

Same here! Any help would be appreciated. You mention further steps but no link. Thanks!

[@shaquillelewis2861]

Thank you so much!!! This worked! Going on about 7 days with this washer issue and this video solved the problem!! 🎉

[@DIYwithMichaelBorders]

Good morning ☕️ That’s great to hear, and thanks for reaching out to us. Many more helpful videos to come. 👍

[@fabiomagalhaes7292]

Worked like a charm. Thank you Michael! Any idea what can cause the machine to do this? Bought mine a few months ago and it's strange that it has this issue already.

[@DIYwithMichaelBorders]

We are honored to hear, much appreciated. A few things can cause this. 1. Power outage 2. Cycle being interrupted by opening door or pressing buttons during cycle 3. Electronic glitch Let us know if you have any questions. 👍🧰

[@markwestwood618]

Washing machine out of warranty and seemed to be stuck, clicking etc. who would have thought pressing buttons on a machine disconnected would work. But it did much to my wife's surprise...and mine.well done😊

[@DIYwithMichaelBorders]

@@markwestwood618 We appreciate you sharing your experience, and 👍👍 goes to you for making it a DIY project. A true testament to the power of DIY! 😁👍🧰

[@iragooding3792]

Thank you ! Way more helpful than customer service! And the actual samsung website!

[@DIYwithMichaelBorders]

You are welcome, we are honored to read this. Customer support can sometimes lead to more confusion and anxiety. 😁👍🧰

[@southcoast2008]

Wow this worked like a charm. Up and running in 30 seconds. Thank you so much.

[@DIYwithMichaelBorders]

@@southcoast2008 You are very welcome. 😁👍🧰☕️

[@schindlerd7]

Hi Michael, thanks for the video. I tried this a while back and it worked amazingly, however, the problem has reared its head again and this time, the reset is not working. You mention to make sure that the machine is turned "off" but since the machine is not powered up, there are no indicators showing what position the washer is in ie. whether it is actually off. How can you tell if its off when the power is not coming on and all the LEDs are out?

[@live4theleafs11]

Can't believe this worked! Felt way too easy. Ur da man!! Thx

[@DIYwithMichaelBorders]

Good morning, that’s kind of you to share. Thank YOU for watching. 😎👍

[@familyaccount34]

Thank you thank you and thank you for this video! It must be a common thing in this model. I have only had mine about 3 years and last night out of nowhere it just decided to play dead. If it wasn't for this video I am sure I would have had to call someone out but this truly did help!

[@DIYwithMichaelBorders]

You are very very welcome, and it means the world to us that you would take the time to share this comment and your experience. Reach out to us any time, and we have many more helpful videos to come! 😁👍

[@Kittypaws90]

This actually helped me get out of SUdS! Thank you !!!

[@dansimat1815]

Thanks for the instructions. A little tweaking on my end and VIOLA works perfectly

[@DIYwithMichaelBorders]

Awesome, thanks for watching & sharing this, we really appreciate it.

[@rebeccathrelfall5456]

Hi, Thanks for the video we've tried the unplug and 5sec procedure, still no joy. Please can you advise on next steps??

[@FootWedge68]

No luck trying the unplug/ 5 sec procedure. What is the 2nd procedure I can try?

[@stevea7746]

Searched and found this very helpful fix......and it worked first time for me! Very grateful....thank you

[@DIYwithMichaelBorders]

Good morning Steve, you are very welcome. Hope all is well from here. 😎👍🔧🔩

[@uncletrick1]

This did the trick for me on a different model Samsung washer. Thank you so much!

[@DIYwithMichaelBorders]

You are very welcome Rob, thanks for watching & sharing this. 😎👍

[@marymarshall578]

Thank you, thank you, thank you. My Samsung washer was blinking PC, and I was about to lose it because it isn't old at all. I did what you said, and viola it's working!!

[@DIYwithMichaelBorders]

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. That is awesome, great job making it a DIY project Mary! 😁👍 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem. toolboxtoken.com Reach out to us any time! 🧰

[@matthewward3169]

Thanks Dude just spent 2 hours messing with washer too much sudds your the only one to say turn off and on again I should have treated it like a computer thanks

[@DIYwithMichaelBorders]

You are welcome Matthew, and thank YOU for sharing this. Kinda the same as computer minus the (computer can’t get wet) part. 😎👍

[@cancel.lgbtq.6892]

Thank you for your helpful vid. Is there a reason why it just stop responding?

[@DIYwithMichaelBorders]

Thanks for watching, it can be as simple as a brief power-outage.

[@kozanecki2]

I opened up front door check switches for main door and small door put back and started to work I did not know that these devices have such a nice diagnostics tools and self tests Thank you all We are clean again 😀

[@DIYwithMichaelBorders]

You are welcome, glad to hear you made it a DIY project and got your machine properly reconfigured. 😁👍🧰

[@MissAngel284]

THANK YOU SO MUCH OMGG THIS HELPED US SO MUCH MY HUSBAND AND I WERE STRESSING 😭😭😭

[@DIYwithMichaelBorders]

@@MissAngel284 You are very welcome! 😁👍🧰

[@MrVladtkach]

Thank you for this. This saved me an expensive visit from the Geek Squad

[@DIYwithMichaelBorders]

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. We are happy to help, and even happier to hear you took on this DIY project. Awesome job getting your machine back up and running properly. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@MrVladtkach]

@@DIYwithMichaelBorders the fix worked initially but doesn’t work anymore. Where did you say the additional troubleshooting procedures are documented?

[@DIYwithMichaelBorders]

@@MrVladtkach Bummer, that’s no fun. Below is an alternative reset procedure. kzbin.info/www/bejne/pmq1qKOAbcmprZosi=bsVHHtZBRbh5VXzI If it continues to cause you troubles, it’s likely that your Control Board is in its early stages of failure…and acting sporadically.

[@fia8079]

Thanks so much !!! I had my son do it and you saved me some money !!! Again thanks

[@DIYwithMichaelBorders]

So happy to help, that’s awesome you and your son made it a DIY project and got your machine reset and configured properly. Enjoy your night. 😎👍

[@beccapotamus4538]

I was a shade away from freak out. Thank you for this video!!!!!

[@DIYwithMichaelBorders]

You are very welcome Becca, freaking out is no fun. 😁 Hope you enjoy the rest of your weekend, thanks for watching.

[@omo5409]

Thank you so much, you saved me a lot of money. It really works.

[@DIYwithMichaelBorders]

@@omo5409 We are happy to help. 👍👍 to you for making it a DIY project. 😎👍🧰

[@davidweekfw1335]

Thanks for help, this video made my washer work about half a year by doing this reset. But I need to do it every week when I use my Samsung washer. It's always happened. Sometimes I need to try a couple times to make it power on. Do you have any suggestions to permanently fix this issue? Changing the control board? Thanks

[@DIYwithMichaelBorders]

Thanks for sharing this, your control board may be in its early stages of failure and may need to be replaced. The second common cause for these symptoms is the actual control panel on the face/front portion of washer with all the buttons on it is in its early stages of failure. Keep us posted. 😎👍

[@davidweekfw1335]

Thanks for suggestions. I brought this Samsung washer WF45R6100AW only for 2-3 years. It's this issue after 1 year warranty expired. I'm thinking of changing the control board. Thanks for help ☺️

[@DIYwithMichaelBorders]

@@davidweekfw1335 You are very welcome, looking forward to hearing back from you. 👍

[@EV-rc4jm]

Thank you so much Michael, you saved this woman $$$$$$$ :)

[@DIYwithMichaelBorders]

You are welcome, saving $$$$$$$ is the BEST. 😁👍

[@EV-rc4jm]

@@DIYwithMichaelBorders Love it when people do what you do and explain things so well, once again thank you :) You have a new subscriber!!!!

[@DIYwithMichaelBorders]

@@EV-rc4jm Getting you the info you need without wasting your time is our goal! We subscribed to your channel as well.

[@karenfrierson9550]

Needed right now, thank you for sharing ✅🍀

[@DIYwithMichaelBorders]

@@karenfrierson9550 We are so honored to help. 😁👍🧰

[@chrisnowak2937]

Worked like a champ- appreciate the simple fix-you rock

[@DIYwithMichaelBorders]

Great to hear Chris, we appreciate you sharing this. Welcome to the DIY Raptor Club. Hope all is well, thanks for watching.

[@nunopt]

Thank you, thank you, thank you !! You made my day ........... 30min later the problem came back again :((

[@DIYwithMichaelBorders]

You are very welcome, so happy to help. Thanks for watching. 😎👍🔧🔩

[@dccatios]

Thank you! I wish I would have seen this video before breaking my washer down looking on the control boards for some type of reset button.

[@DIYwithMichaelBorders]

Good morning, welcome to the DIY Raptor Club. We are happy you came across the video as well. Sounds like you’re back up and running, enjoy your weekend, thanks again David. 😎👍🔧🔩

[@mariasmalls4726]

Omg 😳 THANK YOU SO MUCH 😊 I was about to call a repair guy but I watched this video and it totally works again.

[@DIYwithMichaelBorders]

You are very welcome, so happy to hear the video was helpful. Hope all is well, welcome to the DIY Raptor Club. 😎👍🔧🔩

[@itsmefordyfy]

Working man! You saved me! My Samsung washing machine working again.

[@DIYwithMichaelBorders]

We are honored to read this, the power of DIY! 😁👍 You will continue to benefit greatly and save lots of cash over the years by making your projects DIY! ☕️🧰

[@taylynn214]

Thank you thank you thank you!! This trick worked and saved my sanity!

[@DIYwithMichaelBorders]

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. That’s great to hear and sanity is very important to keep ahold of…at least in our case…😁👍 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@abddu1]

Doesnt the board need any power? I have similar issues and left if for sometime without power. Do i need to plug it in for sometime? Thanks alot.

[@DIYwithMichaelBorders]

Thanks for watching, some people will leave it unplugged for up to 5 minutes before plugging unit back in. Please keep us posted. Hey also if you’re into crypto trading, join our newly launched DIY community ecosystem. Toolboxtoken.com We DIYers need to stick together! 🧰

[@mariammalramasubbu4074]

Thank you so much for this tip.... This works.... Hope you have a great day..

[@DIYwithMichaelBorders]

Great to hear, thanks for watching. Us fellow DIY’ers need to stick together! Hope you have a great day as well. 😎👍🔧🔩

[@savio098765]

You saved my day my washing machine was locked and I couldn’t unlock I tried doing this by switching off and pressing the power and pause button for 5 secs and then turned it on I was able to unlock the washing machine

[@DIYwithMichaelBorders]

Awesome, that’s great. Saving your day puts a smile on our faces. A special thanks to YOU for sharing this comment. 😁👍

[@corybrokaw43]

lol this also just worked on my Kennore!!! thank you so much!!

[@DIYwithMichaelBorders]

Good morning, we are drinking our morning coffee answering any and all questions for the DIY community. You are very welcome Cory. That’s definitely awesome it worked on your Kenmore. 😁 Thanks for watching and taking the time out of your Tuesday evening to share this, it means the world to us. 😎👍

[@EmiGing]

❤ thank you! Thought my machine had gone to heaven. 😊

[@DIYwithMichaelBorders]

@@EmiGing We are honored to help, you are very welcome. 😁👍🧰

[@CarmenPerez-yr7wj]

Hi Mike It didn’t work on mine. But when I plugged it it makes the sound’s it normally makes but it won’t do anything…I do hear a clicking sound inside the panel

[@brianallen0826]

Is this procedure specific to an individual machine? I have a Flexwash unit that will not power on at all. A couple weeks ago, the electricity flickered off-on-off-on, and the following morning the washer wouldn't turn on, it's dead...I think possibly, the power flickering the night before, caused it. I noticed the electrical breaker was flipped. I reset the breaker, everything else on that breaker circuit is fine, but the washer. I tried a different electrical outlet but no luck. I'm guessing either the noise filter or the power board is toast.

[@DIYwithMichaelBorders]

Thanks for watching, it’s a standard reset procedure for all manufactured washers. Since it’s not working for your washer, it’s likely that the flickering of power hurt your machine. Power surges can cause havoc on the internal electronics and it’s likely that your washer will need a new control board. Keep us posted. 🧰

[@Inshuti123]

Thanks a lot! Your tip works for my washer✌️✌️

[@DIYwithMichaelBorders]

Awesome, and that’s very kind of you to share this on your Saturday afternoon. Thank YOU. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@andrecummings13]

I did exactly what you said , now I’m about to see if it will wash my load correctly. So I will let you know here shortly if it work ?????

[@beemcgaha8046]

About to get the new washing machine. Thank you!!

[@DIYwithMichaelBorders]

Thanks for watching, please let us know if you have any questions.

[@Jesuschrististhelordandsavior]

Crazy that it was this easy it worked like magic thank you!

[@DIYwithMichaelBorders]

Great to hear & we appreciate you sharing this. Hope all is well, thanks for watching. 😎👍🔧🔩

[@barbaraterry1979]

Any chance you know how to release the latch that opens addwash door ? Your machine in video is same as mine. I can open main door but the little door won’t spring open.

[@JJKnapich]

so what will cause this? Hope this doesn't mean of a deeper problem

[@DIYwithMichaelBorders]

Thanks for watching, most common causes are power outage or power surge. 😎👍

[@BeautifullyCourt]

Does this work on all Samsung washers? Or just this model?

[@DIYwithMichaelBorders]

@@BeautifullyCourt Good morning ☕️ This is a standard reset for all Samsung washing machines. 😁👍🧰

[@atomictabasco1509]

My problem was the panel would turn on but not responding with any buttons or knobs. The temperature and all buttons were going crazy, flashing and blinking. I have the activewash aquajet. The reset shown in this video did work. Never had any indication in the past of a problem. Would be curious to know what and why this happens. Crazy how this worked without being plugged in. Kinda Terminator SkyNet scary, but a big Thank you

[@DIYwithMichaelBorders]

Thanks for watching and sharing this. Great to hear you’re back up and running. A few things can cause this however most common is a power outage. Another common cause that leads to sporadic panel behavior is when the buttons are pressed extremely fast and lightly….leading to an electrical glitch…kinda like how one can get a quick wave of cold chills. We recommend slow and gentle applications to the buttons as opposed to fast and reckless applications. 😁👍

[@blancamichael60]

Why the softener doesn’t work.. looks like plug.. how I can resolve the problem? I like how you show to restart 👍🏻👏🏼

[@kristinemacwan7894]

Thank you, the video helped. Any idea what's the reason behind why the washer isnt working in the first place?

[@DIYwithMichaelBorders]

You are very welcome Kristine, thanks for watching. The most common cause is a quick power surge or power outage. Let us know if you have any questions. Enjoy your night. 😎👍🔧🔩

[@timmyers8100]

Thanks!!! worked on a WW12H8420EW washing machine.

[@DIYwithMichaelBorders]

Awesome Awesome, thanks for sharing this Tim, it means the world to us. 👍

[@jmhinde]

Thank you so much! This worked on my Samsung machine.

[@DIYwithMichaelBorders]

Good morning, just poured a ☕️ and am sitting down to answer any and all questions for the DIY community. Great to hear, thanks for taking a moment to share this. Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@Brenda-ik3tl]

I tried this life hack and it worked thank you

[@DIYwithMichaelBorders]

AWESOME!!! And great job Brenda making it a DIY project. Enjoy that rewarding feeling and the cash you saved. 😎👍

[@mop4216]

AMAZING!!! Mine’s a different model, I’m in the UK, but it looks somewhat similar. Did exactly what you said, and we’re back on! Brilliant. Thought it was dead. 😩🤣 Thank you so much! 🙏🏼

[@DIYwithMichaelBorders]

Very cool, we really appreciate you sharing this. Hopefully many stress free days ahead for you. 😎👍

[@TheSeaBadger]

I found a way to prevent the need to reset the washer by simply putting a power surge protector on the outlet and plugging the washer into the surge protector. It seems to filter the electric surges enough to keep the washer from needing to be reset. It should work, but even if it doesn't it is cheap insurance to keep the circuit board safe from a large power surge. My 2 cents.

[@DIYwithMichaelBorders]

@@TheSeaBadger Thanks for watching & sharing your project. Hope all is well.

[@gunnarorandresson1869]

Thanks for this advice. It worked. I am hitting subscribe for that advice. Have small kids, very important to have washing machine in order.

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Great to hear you’re back up and running. We subscribed to your channel as well. Keep in touch. 😎👍🔧🔩

[@mucholoko90]

Does it work for the Dryer as well?

[@whoopsydaisy6389]

You just improved what has thusfar bering a ridiculously aggravating day since the moment I got out of bed. I could kiss you❤ Thanks for helping one thing go right today.

[@DIYwithMichaelBorders]

@@whoopsydaisy6389 Thank you for watching, we are very honored to help. 😁👍🧰

[@JoseLopez-yp4nq]

You rock, thanks for the tip!!!!! Worked like a charm

[@Amelia-wq3cd]

Can confirm this works with WF50A86, even with the light touch buttons. Thank you so much!!!

[@DIYwithMichaelBorders]

Thanks for watching & it can indeed. Looking forward to hearing back from you, thanks again Amelia. 👍

[@raekelley6175]

Miracles do exist! Blessings to you!

[@BobMcQuinn]

This has worked before, Today it did't work so I went farther , Checked the fuse and it was good. After doing the reset a few times I had to walk away. Come back 1/2 hour are so later, hit the on botton and it started. Had to unplug to but all back together, and now it will not work. Have tried the reset multible times and it will not start. What do you think?

[@BobMcQuinn]

Ok, is there a time frame it can take after the reset? After taking the time to post...I went back in and.....it started. By the way this has came up after a power outage. But both times it has worked it was after a delay. First time was over 24 hours. This time was after resetting all mourning. Must have tried it 20 times. Don't understand the delay. Lets hope we don't have any more power outages.

[@gregdurkiewicz2871]

YOU ARE A LIFE SAVER , THANK YOU VERY MUCH, I WAS JUST ABOUT TO TOSS IT OUT

[@DIYwithMichaelBorders]

We appreciate that, we are happy to hear you didn’t throw it out. 😁👍 Reach out to us any time.

[@cathalfarrell7325]

Worked a treat, thank you! And to think I was just about to buy a new one, you saved me $700, or $300 on a repair man

[@DIYwithMichaelBorders]

Good morning, welcome to the DIY Raptor Club. We appreciate you sharing this. Saving $300 or $700 is a big deal. 😁 Thanks for watching, hopefully many stress free days ahead for you. 😎👍🔧🔩

[@sambeuch4324]

Lol thanks for this…saved me a headache.

[@DIYwithMichaelBorders]

Hey Sam, so happy to help. Thanks for watching. 👍

[@bahhaziz]

If the machine is unplugged what pressing buttons could do???

[@DIYwithMichaelBorders]

@@bahhaziz Thanks for watching, this is the proper guidance set forth by service. 🧰

[@dope7kids]

Thanks so much, mine wouldn't power up and i was just about to go buy a new one( this one 9 yrs. old) and it worked

[@tuco5916]

You the man, Michael!...THX👏👏👏

[@DIYwithMichaelBorders]

You’re very welcome, thank YOU for sharing this on your Saturday afternoon. 👍

[@Ashy_500]

what if it suddenly dies while plugged in, does it mean it overheated or is damaged sir? We have the same washing machine but ours suddenly died while plugged in and then didn't work. what can be done?

[@DIYwithMichaelBorders]

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. That’s no fun. Its likely to be a faulty control board. Replacing control board is a friendly and worthwhile investment. Keep us posted. 😎👍

[@myrahj1482]

This help unlock the washer door. Thank you so much!❤

[@romxone]

it actually worked thank you so much😩

[@DIYwithMichaelBorders]

Good morning ☕️ you are welcome. Great to hear it worked. 😁👍🧰

[@davidmacintyre3335]

Seems to have sorted the issue- cheers Mike

[@DIYwithMichaelBorders]

Very cool, thanks for watching & sharing this David. Keep us posted if anything changes. Hope all is well. 😎👍

[@vinicioloyola177]

Thank you brotha! Was about to purchase another one. In my case this worked on a different model samsung.

[@staceyfairchild527]

Will this also work on a top loader Samsung washer?

[@jenjen498]

Thank you 🤣 I thought I had to ring an engineer.. Works a treat

[@dimpalbayan4884]

Thank you very much for the help

[@DIYwithMichaelBorders]

@@dimpalbayan4884 You are welcome. 😁👍🧰

[@svetlanatomeva1065]

Does not work. It stopped working while washing. It's turned off with the lock closed and wet things inside... it won't open or turn on... What do you recommend?

[@DIYwithMichaelBorders]

Thanks for watching, that’s no fun. We would perform this reset procedure a second and third time to see if you machine snaps out of its glitch. If that doesn’t work, below is a link to our video showing an additional procedure to perform. kzbin.info/www/bejne/hHWyeImqobp3qdUsi=wnMlRBV1jhQNKj0n If your control board has failed, it will need to be replaced.

[@foxymaz11]

It worked!!!! Thank you so much!!!

[@aster6053]

Thank you soooo much u made day stay blessed 😍😍😍😍

[@DIYwithMichaelBorders]

You are very welcome, and a special thanks to you for taking the time out of your Sunday afternoon to share this, it means the world to us.

[@4RunningHorses]

Panel turns on, but there's a clock icon and wash settings cannot be changed. Buttons do nothing. There's no sound. Will the reset fix that? Only default cycles work.

[@DIYwithMichaelBorders]

Thanks for watching, it’s definitely worth trying. 👍

[@4RunningHorses]

Nope. It didn't work.

[@DIYwithMichaelBorders]

@@4RunningHorses Good morning ☕️ you may want to try this reset procedure a second and third time. We have talked to many viewers that have mentioned that the first attempt was unsuccessful however, the second or third reset attempt worked. 🧰

[@kerrigan.]

Mine will power on and all buttons work but the dial stopped responding, will this fix that? This happened after I changed the shocks, is there a connector I might have disconnected underneath the washer?

[@muradnpp7123]

Thank you from Bangladesh. It works for my washing machine

[@DIYwithMichaelBorders]

You are very welcome, we are happy to hear you took the time from Bangladesh to watch our video and share this comment. Means the world to us. 😎👍