Saturn 4 Ultra - PFA Film Replacement Process

Рет қаралды 4,786

Күн бұрын

Пікірлер: 45

@meghantrautman8503 2 күн бұрын

I just got into 3D resin printing and your tutorial video on how to change the FEP sheet is the best and easiest to understand that I've found. Thank you so much!!🥳

@ThatDudes3DPrints 31 минут бұрын

Thanks for watching! Glad I was of some help!

@ramblingbadger 22 күн бұрын

Thanks for this, very useful and well made. I'm just about to change mine for the first time after moving up from a Mars 3 so good to see you didn't need to tension it using a cap... one less thing to worry about!

@ThatDudes3DPrints 21 күн бұрын

Thank you for watching!

@BluelineDesignStudio 2 ай бұрын

Thank you for this tutorial-its very thorough. I just started 3D printing with the Saturn 4 Ultra and got my first hole in the PFA. Thankfully I took the advice of another channel and had a screen protector for the LCD and the leak was minor. After watching your video I feel much more confident to replace the liner. :)

@ThatDudes3DPrints 2 ай бұрын

Thanks so much for watching! Glad I could help! And good thing the leak was minor!!

@BluelineDesignStudio 2 ай бұрын

@@ThatDudes3DPrints Just replaced it - took no time at all and was tight as a drum! Thank you again.

@patrickhentschke6542 Ай бұрын

How did you buy the screen protector and which one was it? :D I'm at the point where I need to replace the pfa and recognized slight leaking at the edges. Now would be the perfect time to install a protector. :D

@shrug_shrugsly 21 күн бұрын

Great tip on the magnetic screw pan and also the tip about the resin residue! Breaking comments into multiple for your algorithm 😊I hope your channel gets the million subs!

@shrug_shrugsly 21 күн бұрын

Your videos are great! This looks annoying if we have to cut our own holes, but lucky-people-problems, so I’ll survive.

@sanguinmagus6031 15 күн бұрын

Thanks for the vids mate. Definitely helps a newbie out

@ThatDudes3DPrints 14 күн бұрын

Thanks for watching! Newbie myself! Lol

@coeag6904 27 күн бұрын

Excellent video

@ThatDudes3DPrints 21 күн бұрын

Thank you! 🙏🏽

@vladsigus 2 ай бұрын

Nice tut, tks!

@ThatDudes3DPrints 2 ай бұрын

Thanks for watching!

@ibendover4817 26 күн бұрын

Switched to a bambu printer for the first time and made me feel like resin printers are stuck in the stone age in comparison with processes like these. Also the fep on these larger printers wants to tear more easily. Quite a few people complaining about holes and resin leaking after just a few prints for the saturn.

@cristians5395 25 күн бұрын

mai successo in 1 anno di utilizzo sulla saturn 3

@ThatDudes3DPrints 21 күн бұрын

Yeah I can agree with you but resin printer have not been as popular as FDM so they have had more people giving feed back and there likes and dislikes but seems like now resin printers are also starting to novate a little!

@Zeriel00 Ай бұрын

This is what I hate the MOST about 3D printing, the MILLION screws you have to take out and replace to change the FEP. It's ridiculous, so much technology why can't Elegoo find a better way to do it :(

@ThatDudes3DPrints Ай бұрын

I agree and hopefully eventually they will as technology gets better!

@tahmineabbasi3750 27 күн бұрын

very usefull. thx

@ThatDudes3DPrints 21 күн бұрын

Thanks for watching!

@jeramy77m 17 күн бұрын

Do you change your FEP with the 4 ultra says you have reach the FEP limit?

@ThatDudes3DPrints 14 күн бұрын

I do only because I am still learning this machine however I have seen some people who go past the recommended time and are fine

@brianstanhope7656 15 күн бұрын

some sites tell me that it matters what direction the FEP is installed. does it matter if the side with blue film originally or clear protective film originally is "up" , Ie the side that the resin will rest on? thanks!

@ThatDudes3DPrints 14 күн бұрын

Great question! I might have to do some digging as I too am a bit new to this but I have just put it on randomly and haven't really had any issues or loss in quality

@brianstanhope7656 14 күн бұрын

@@ThatDudes3DPrints Thanks so much, I am nrew to resin printing as well. Have been doing filament printing for a few years. I am having a lot of issues with the resin printer sticking to the PFA and then tearing it when i try to remove. Am sure I am doing something wrong.... but changing the film every print is getting to be a downer... Thanks again for the answer.

@jn6305 19 күн бұрын

Do we not need to use a tensioner for PFA? I just replaced mine without a tensioner and the first print did the bottom layers and then failed from the middle out.

@ThatDudes3DPrints 14 күн бұрын

I haven't had any issues the way that I do it but if you feel more comfortable doing it another way by all means. I am just showing you what I do.

@ColtsBuddy Ай бұрын

Ive seen other FEP sheets using soda bottle cap for stretching, how important is this?

@ThatDudes3DPrints Ай бұрын

So I know that other printers out there might have you do the stretching of the sheet and can be a bit of a pain I would recommend watching a video on your printer to get a better idea. Getting a perfect stretch is crucial to ensure no leaking happens and that your FEP lasts and functions best.

@macuser2469 Ай бұрын

do you think is can print dental models?

@ThatDudes3DPrints Ай бұрын

Yes should be able to you might just need special resin for that particular thing!

@therealjonaswp602 Ай бұрын

Is it normal for the screws to become loose, after you already tightened them twice? I could keep going in circles indefinately. 😂

@ThatDudes3DPrints Ай бұрын

🤣 i feel you! No once they are down tight should be good. Unless your like me who forgets to tighten some all the way down lol

@therealjonaswp602 Ай бұрын

@@ThatDudes3DPrints indeed! Worst thing is: two days after I changed the fep due to dents - I got some NEW dents and now I have to change it AGAIN 😂 Btw, where did you buy those screwdrivers that you use?