Saving a GMC Canyon with 434,000 Miles from the Crusher - Won't Start, Fuel Pump Tabs Rotted

This 2005 GMC Canyon was headed for the crusher. It cranks but will not start. The customer attempted to replace the fuel pump but the tabs on top of the tank were completely rotted away.
Send us a postcard:
Watch Wes Work
P.O. Box 106
Fulton, IL 61252
Send us an email:
[e-mail]

[@WatchWesWork]

Lock Ring Repair Kit - www.gastankrenu.net/search-by-year/gm-plastic-gas-tank-lock-ring-repair Lisle Tap Sockets - amzn.to/3rHHwah Lisle Throttle Presser - amzn.to/33JESJb

[@mobiousenigma]

morning wess thanks for the video

[@jasonmerritt8349]

Question for you Wes what is that info on the wiring diagnostic tools you used in this video

[@trangia12]

Can you mention who makes the tester kit. You should set up an Amazon store.

[@HUBBABUBBADOOPYDOOP]

Excellent.

[@jefferydavis8486]

My sleeper needs hooked up to my truck can you do that

[@JVerschueren]

When I was studying to become an engineer, we had this one professor who was really big on vibration testing and he used to say vibration would break or undo anything if you gave it enough time. 434k miles is a long time.

[@wildbill5670]

So true. And mileage is mileage. Replace engines, transmissions, brakes as time goes by but everything else still has over 400k miles. Seat cushions, window mechanisms, body mounts, door hinges, etc.

[@wildbill5670]

@@DonLicuala Could beat driving a box of bolts.

[@tufftonetimmy2333]

That's what she said 😂

[@Renville80]

My work builds motor controls for a major industrial OEM, and if the board isn't potted, then just about anything that can wiggle, no matter how little, gets epoxied in place!

[@thirzapeevey2395]

Trucks are useful as long as they run. It doesn't have to be on the road. It still has utility for checking crops and fences, hauling stuff around the farm.

[@baconeverysunday656]

This is one of the most sensible comments I’ve read this year!! If it runs, it is useful, and therefore worth getting back up and running!!! People forget how useful even a beat up running truck is.

[@timolson515]

@@baconeverysunday656 ditto to everything you said 👍

[@richardking6066]

@@baconeverysunday656 I belong to a gliding club where our two Toyota Hilux pickups each have well over 100 000 miles - all off road! (apart from delivery mileage)

[@baddriversofthenorcalarea500]

@@baconeverysunday656 Not if it costs more to get it running than to just buy a used one that already runs.

[@skippypasta-sauce3121]

@@baddriversofthenorcalarea500 more than likely another used one that runs is just a short time away from similar issues so you'll be right back to where you started fixing the new used one you decided to buy. Might as well fix the one you have. I mean not in every case but a lot of times that's the situation.

[@stew6338]

That fuel tank repair kit looks like a good enough repair to last another few hundred thousand miles. Well done Wes.

[@katmandomo]

It should outlast the truck for sure.

[@robertquin1695]

I still get amazed at how you manage to get the crap that they send you functioning properly. Kudos to you.

[@JoeyLovesTrains]

$1200 for a fuel tank is insane, I feel like $120 would be spot on for a tank from an old GMC canyon

[@gregcrabb3497]

I just can't believe there are no aftermarket tanks out there!

[@maggs131]

@@gregcrabb3497 I dont think aftermarket companies can keep up with every car changing design every 6 months

[@christopherestes6760]

I agree- 300 MAX. That seller was high ballin to see how much he could take

[@maggs131]

@@DonLicuala vapor lock is when gas boils before reaching the carb or fuel injectors, how does what you explained prevent this?

[@MrBakedDaily]

Yea they're 65$ at the junkyard for a decent one already pulled .

[@iandavid7730]

Love your work, don't care about audio mistakes and squeezed camera angles, just appreciate you doing your best to get us as close to what you do as you can. Keep producing this content and I'll keep watching. Just really enjoy, you know, watching Wes work. Hope the family's doing well.

[@somebodyelse6673]

Yeah, what he said!

[@texasjetman]

Agree what he said

[@iandavid7730]

I agree with what I said.

[@montehammons7917]

@@iandavid7730 so do I. Wes is awesome.

[@ivancedillo8]

I agreed what you said agreed what the other guy said agreed in general 😅

[@Deadpresident1973]

My father bought an S10 pick up truck in 1988. He turned it over three times+ before he sold it in 1999, and then he sold it to a gentleman that put 200,000+ on it, and he’s still driving it today! So those miles can absolutely be real. The truck had the four-cylinder motor I think it was like a 2.5 L. I remember he paid $8000 for it brand new! Minimum wage in the state we lived in was $4.25 per hour then. However, it was the basic model no ashtray, no cigarette lighter, and no radio. Just a five speed manual truck. He got it like that because one, he don’t smoke and two, we always put better aftermarket stereos in our vehicles. No AC though! Also for those of you that might be interested he always kept up on the maintenance and always used Pennzoil motor oil! Go Rick Mears! The older folks will get it😀

[@jackburnell3209]

Wow, a mechanic that works without a $7,000 diagnostic scanner scope. Subscribed!

[@Kc12v140]

I work on heavy equipment, and you are 100% correct on the dirt inside the split loom. It happens faster on equipment for obvious reasons, but the dirt will just grind away at the wires over time. It will also hold moisture and can really screw with PWM signals to coils, and PWM signals coming back from sensors. The excess moisture and dirt can change the capacitance and impedance of a twisted pair circuit and cause signal drift, usually just enough for the signal to go outside of the expected value. It can be a hard problem to find. Good job Wes 👍🏻

[@WatchWesWork]

Some companies like Ford wrap the whole loom in electrical tape. That seems like a good idea.

[@blake8297]

I wonder about this with the fabric type loom also. Seems it would let the dirt in even quicker than the split loom.

[@jonnycando]

@@blake8297 it has to be wrapped properly….and I am sure they have Rube Goldberg machine that can do it tightly with no gaps.

[@corywillbanks6348]

Cat’s braided harnesses are awesome in that sense but on the other hand they suck if you do have to make repairs.

[@hawkdsl]

@@WatchWesWork That doesn't matter. Vibration from the harder plastic loom is still going to cut into the softer wire insulation over time. The only real fix is heat shrink full length rubber looms.

[@45AMT]

Even down here in the south where we get very little snow or salty roads I've seen these rot out. They collect mud and moisture. It rots out the fuel pump top and the lock ring mostly.Whoever invented those repair kits are a genius.

[@johndehoog5567]

It runs, it drives, it stops and thank goodness it's got a front sway bar. Well done Wes!!

[@Contractorhouseguy]

My fuel pump on my 08 Colorado rusted out so bad the vent hose and the fuel line off the pump rusted in place. Broke off the connections with the 5/8 and 3/8 fittings even being gentle. My ring is in the same spot as that one I just haven’t broken it into pieces yet. Was spraying gas all on the underside of my bed. Bought it for 1100 because it “had a gas odor” guy didn’t want to mess with it. 200k and engine bay was spotless I couldn’t pass it up. Soaked the whole pump lid and connections with an entire can of pb blaster on and off trying to tap it loose and no luck. Glad I found your video going to snag that tank kit and keep it moving. Thanks for posting this bud.

[@grosseileracingteam]

Hey Wes. Sometimes you gotta just smile, shake the man's hand, and take his money with the other. Been doing it for years. Imagine that. Someone from Michigan making repair kits for rust issues. Thanks for posting.

[@frank-t6857]

@@lewiskiable Boat Owner got it all right the way I see it. I think you misunderstood.

[@garyvanrheenen181]

@@lewiskiable Michigan vehicles have a lot of rust issues along with the rest of the Midwest.

[@McDerff]

Thanks for working so hard to save that little truck Wes. I just rolled over 500k on my 92 S10 and seeing that thing come back to life is great.

[@gunnar4318]

I just bought my 92 s10! Those little trucks are great in the snow, I can’t wait to get it restored and put some miles down on it. Hoping to get the same miles you’ve gotten out of it.

[@MitzvosGolem1]

320 and 380 on my 2003,2004 GM 1500 vans. Only one transmission and two fuel pump alt starters wheel hubs all minor repairs. I keep them forever.

[@tomh6779]

How many engines and transmissions?

[@McDerff]

@@tomh6779 Original engine, rebuilt trans

[@MitzvosGolem1]

@@tomh6779 one transmission since my worker towed my skidsteer in overdrive. 4.3 and 5.3 vortec s . I change tranny oil twice a year and run Mobil normal 5w30 every 3-5 k with Fram filters. Burn no oil leak a little out of rear mains.

[@davehevner8219]

As usual very common sense educational video. The subtle humor is my favorite ie “the bolts are there just missing their heads “. After working 20 years as diesel mechanic on very old equipment these videos bring back many memories of daytime nightmares.

[@brucedibben7604]

What a patient enquiring guy you are Wes. I honestly do not know any fixer who would run the race as you do. If only we all lived near you buddy.

[@MrWaltjam]

that was a good one. I thought it was over when ya couldnt find a fuel tank. great repair... 1200 is insane for a fuel tank.

[@PineHollowAutoDiagnostics]

Great work Wes! Good for another 430k miles! I would have left the old fuel pump in there haha..."ABIGAIL" pumps have unknown long-term reliability xD

[@JustinLaNoue]

You would've broken out the Pico and the truck would've just submitted.

[@WatchWesWork]

Right. I think we'll be seeing "Abigail" again soon!

[@snowmama9030]

I have 320,000 on my 97silverado. It runs great. Tuneups and oil changes

[@Tinker001]

@@WatchWesWork I have a niece named Abigail. She's been going strong for 16 years so far. (Tho she was kinda leaky for the first year or so...)

[@throttlebottle5906]

abigail, abifail. 🤡 💩

[@MarkPdot]

I'm currently driving a 2000 Chevrolet Silverado 2500 with 448k miles. I bought it with 363k miles in 2015. Drove this truck across the U.S. and up through Canada to Alaska. Replaced the engine about a year ago. She's still kicking!

[@prylosecorsomething3194]

I drive a gmc canyon every day, these little trucks are super underrated and I'll be defending them forever.

[@martintaylor984]

Hell yea gotta love a Saturday morning next to the fire, watching Wes work!!!!

[@brianm9007]

I was thinking the same thing!! Thanks, Wes!

[@seanhorton3811]

You know you are in the rest belt when the cost of a new set of tires is enough to total the vehicle. I am so glad I live in a rust free part of the country and a car can live to an old age and not rot out.

[@ChevyConQueso]

First time I worked on a truck from Michigan, I wasn't sure if there was enough truck left afterward to put back on the road. It had shaken off all over the floor! I thank God I was born in Texas where we don't have to deal with your vehicle becoming part of the soil in 15 years.

[@gundude82]

Here in Tennessee I see just about everything 4x4 get pretty rusty. 90's Chevy's are the worst but most trucks get it

[@honestmechanic7974]

The old "just missing the bolt heads" gets you everytime. Had to laugh out loud when I heard that.

[@richardmorse5307]

I think the Trailblazer repair was the most difficult I’ve seen but this one requires the patience of a Saint!

[@berkoskilandscaping4247]

Oh by the way. I love how you quiet down the audio when you're editing when you're grinding and stuff like that so I don't get blown out of my seat. I thank you. haha

[@joejakubec9708]

Well done as usual. My favorite channel. No nonsense, great diagnostics, real world repairs, not just throwing new parts.

[@DetriotDown]

This guy is an EXCELLENT TOOL PUSHER....WE NEED MORE MECHANICS LIKE THIS A+

[@Oddman1980]

The check engine light was always on in my 2010 Colorado. The emissions equipment seemed really sensitive to any variation that popped up as the truck got older. It always ran, although it only had half the miles this one does!

[@OldSkoolF]

The Vent valves always have issues. I've replaced mine 3x and coated the filler neck and lock ring with Cosmoline. I have the truck oil sprayed underneath every year. I live in Buffalo and bought it new in 05.. Frame is still hole free.

[@pdb4382]

The audio was fine even from the camera. I appreciate the work you do to keep saving old and well-used equipment.

[@nicholas5623]

As someone with a boat tank in there rig for work purposes, it's working now 4 years on. The money saved keeping this old rig on the road is awesome

[@MarketingCoachKen]

love this type of diagnostic and repair work. really great case study.

[@andyrobinson339]

The amount of thought and care you put into everything is staggering. Thank you!

[@jabbasan12]

Can’t start my weekend without watching Wes Work!

[@trep53]

This is why I watch your channel, you fix things that others give up on. Fabulous content!

[@Drvanosdrand]

this is why i watch your channel Wes, because you actually troubleshoot and find the cause of the problem

[@cpcoark]

Nice fix. I'm glad to see there is a pump mount repair kit. What I do on those pump cavities is pour a wax base undercoating over it. Like Woolwax. Should keep the water and salt out and be removable for future repairs.

[@jesterr7133]

I had a '96 Roadmaster with 294K on it, and it didn't even burn oil. That is the highest mileage I have ever seen on a vehicle. Gotta love the LT1.

[@JackCarregan]

my landlord took me to a party in his 1996 Toyota Tacoma, I casually asked the miles and he told me 450k (previous record was 310k on a civic)

[@ashes2ashes863]

I had a 2000 impala with a 3800 that had 494k on it when i sold it to my neighbor. It was used for field service for over a decade. Only ever needed two intake manifold gaskets and one shift solenoid replaced. Everything else was routine maintenance. Didn't even have any visible rust. My neighbor's son went to a party, drank, and smashed it into a parked car on the side of main st in town. Totalled both cars, but walked away unscathed.

[@maggs131]

The most amazing thing I ever saw from a LT1 Buick roadmaster was when I saw a station wagon version towing a 24' pontoon boat. The only reason I know that's crazy is my friend an I go out on his 24' pontoon boat and he tows it with a chevy 1 ton dually sporting a 454 and it struggles on hills so that poor wagon must be dying

[@BarnyardEngineering]

Had a feeling that self-tappers would be part of the solution. Although my solution also involved fender washers. That plate is quite the clever solution.

[@Bret4207]

Amen on the fender washers! With self tappers, fender washers, duct tape and some zip ties you can fix almost anything! Throw in some joist hangers and a a welder and anything short of brain surgery is a DIY project!

[@Tinker001]

@@Bret4207 You completely forgot the huge supply of RTV.

[@throttlebottle5906]

@@Tinker001 use seal-all, many of us used to patch holes in steel tanks with it and thin sheets steel(tin), just clean with with REAL brass bristle brushes, so you do not go BOOM/fire. you'll need to clean it all good, leave it kind of coarse /scratched surface and let the stuff set overnight. best bet is also add some mechanical fastener, pushing against the area from the body/frame. like pvc pipe, or other with thick rubber piece also. I've seen that last 5+ years just below a tank seam leak, so it was very often under fuel.

[@Bret4207]

@@Tinker001 I stand corrected!!! I also forgot pop rivets!!! With enough pop rivets, old metal roofing and Bloo Gloo you could pretty much raise the Titanic!!!

[@desirichert9394]

The work you do is just amazing! When you get done with a repair it looks so professional! Be Proud, my Friend!

[@whammond511]

Why shouldn’t it look professional? After all he IS a professional!!

[@stewybrooks]

@@whammond511 balls are on our chin

[@AntonioClaudioMichael]

Always a good day when the vehicle gets towed in and it drives out @Watch Wes Work

[@mrclaus859]

Thanks Wes. Love watching you figure out and fix rusted out autos. Great job

[@mitchs323]

The local Chevrolet dealer here serviced one of the trucks for a local delivery service, at the time I was talking to them, the half ton pickup had in excess of 600,000 miles. When asked what would happen when the truck quit, the owner of the company said, park it, take the tags off and get a ride back home. The guys at the dealership told me that it still had the original engine, and all of the service was done at the dealership and to the manufacture's schedule.

[@rickmenasian6774]

This is my favorite KZbin show. Interesting content with comedy and occasional appearances of a pretty Harry Potter lady and a dog that can seek out critters, not to mention a future little Wes.

[@alandmunk3h]

27:53 - I feel that sigh so much. I can totally relate. The way Wes speaks to camera is very relaxing though. It's great to see someone succeed, especially when they include all the sighs and speed bumps along the way.

[@littlewingpsc27]

At the end when you said it had no license, no insurance, and no tail lights, I thought yep, the perfect farm truck. I bet the farmer that bought it off the guy who broke down in front of his house got a great deal on a perfectly good farm truck.

[@erik_dk842]

He added $50 to the scrapper's $100 bid.

[@nowake]

@@erik_dk842 And considering the mileage on it, the previous owner thought he'd squeezed every drop of utility from it. Enter the Farmer!

[@katelights]

@@erik_dk842 probably offered $100 and a ride home.

[@ulrichminky9495]

Another member of the I am never getting magnetic imaging done club. The amount of metal that a MRI machine would pull through a fellow who has worked in the trades would be devastating.

[@brianbutterworth8186]

I like how you go through the diagnostic steps instead of just loading the parts cannon. Really enjoy your videos Wes

[@richard1835]

Glad to see someone trying to give new life back to an old vehicle.

[@assessor1276]

Hey Wes: I don’t want to be one of those guys who barks about his favourite sealer - BUT - have you ever tried Roll Royce Hylomar Blue? It is used in the aviation industry and is totally fuel and oil proof and never hardens. Get it on line or at small airports where they fix airplanes. …and welcome back Wes!

[@homer5103]

Exactly the same as the permatex no.3 Also known as Aviation form-a-gasket Which he is using

[@edsyphan3425]

Hey that's good to know. It's used in old air cooled BMW motorcycles, and I haven't seen it for sale in ages.

[@rmr5740]

I'd watch this sort of video all day long, I can't believe how fast that 43 minutes flashed by. Nice job Wes.

[@Esuper1]

You make it look easy. There's mechanics and then there are car doctors. You sir are a PHD.

[@davidhill4711]

This is one for the books, amazing that you brought it back to life. Awesome job

[@sabrekat7904]

Another one snatched from the jaws of the scrap yard and it seems to run ok.Well done for your persistance with the fuel tank,really pleased it paid off for you.There is an engineer somewhere out there who must be SO PLEASED with his design for that pump/sender/lock ring.He MUST have seen the problems this was going to cause and just thought "never mind, it's not going to be MY problem"

[@TheUlrikkaul]

Or he could be that guy starting a business producing repair kits! 🤣

[@tlcraig9033]

Wes, the drilling was like hearing your fingernails on a chalkboard.. I am so happy living in the south with NO salt issues...I love watching you repair problems we never have before we repair.....like your process ! good jobs well done sir

[@sydneystewart6059]

Another Dead duck, ghost arises from the grave thanks to a very determined Wes to have fixed this old wreck, WELL DONE WES!

[@allianceofvengeance]

Great video man. I appreciate the production quality, your knowledge, and your willingness to show exactly what tools you used and where to get them.

[@FabricationStation36]

a small tip for you Wes , when you get a bolt that is broken off at an angle . get out your rotary burr with a ball end and make a depression with the ball allowing it to form its shape into the bolt and make the deepest part closest to center as possible . it will stop the bit from walking altogether

[@nickclover5124]

It will stop the bit from walking

[@waynegoebel395]

Man.... what a great mechanic, well done, Wes.

[@fallingzeppelin69]

I love this channel. Entertaining and extremely informative. Thanks Wes.

[@slypig24]

Just like a Horse whisperer, thst can tame a wild horse, Wes, your a car whisperer, and you can always bring them back from the dead. Great episode again.

[@waltersobchak2973]

I had an 84 S15 Pickup that I bought when I turned 16. Shortly thereafter at 125K miles the oil pressure went to zero and by the time I was done I had acid washed and had the block bored out, new pistons, new cam shaft, new water pump, new fly wheel (cracked), new distributor cap and rotor, new oil sending unit... Pretty much every part I pulled off was toast. Even doing the labor myself I was another $700 into a $1200 truck. But that rebuild made it to 375k miles where the years of road salt finally sent it to it's grave even though the motor was still good. I'm at 330k on an 05 Impala and likewise that 3.8L refuses to die but everyday there's less car left around it. Envy those not in the rust belt...

[@timlawrence3264]

You, Eric O and Ivan are my favorite three guys. Keep the videos coming. I learn valuable info every time I watch. You are an outstanding teacher, mechanic and a fine human being.

[@paulkirkland1535]

My thoughts exactly. Wes the world NEEDS more guys like you period! Excellent work all the way. I couldn't have done any better myself. I've been at this trade for 45 years so I've worked on all sorts and conditions of vehicles from motorcycles to passenger and heavy duty and some farm equipment. Having spent most of my life in Canada I've seen my share of rust buckets so I know the drill of doing work on such vehicles. Yes it can be a ROYAL P.I.T.A but it comes with the territory. I'll remember that repair kit for the fuel pump if I have to do one again. Due to medical issues I've taken early retirement from the everyday bump and grind but I still do some small projects occasionally. God bless you and your family and take care. 😀👆💯

[@123andme]

I also like rainman rays channel.

[@jeffreykbevins7116]

Well I really enjoyed this video and you learned me a couple of great tips . So thanks, for the information. You had several problems to figure out with the truck, but you got them solved and got the track back running . Your videos are always interesting and you have good content . I catch you later on another project, so be careful and stay safe and keep on repairing them . As always, Jeffrey !!!

[@CJS6611]

Hi Chris here from UK, Happy New Year. Glad to see you back in action. Love your shows.

[@newrad2007]

You are a braver man than me Wes, good deal on getting it going and out of your shop. Too bad you couldn't even give it a tail light guarantee since the box was gone.

[@WatchWesWork]

Next time!

[@richardluce775]

Warranty option 2 30/30 warranty 30 feet or 30 seconds which ever occurs first.

[@denisewebb]

Great video, I love how you do all the small repairs to make the engine run better. Your integrity is so refreshing.

[@onsturn]

Just bought those handy tap sockets. I was cringing watching you brush away those metal shards off your jacket with your bare hands. I’ve learned the hard way having to pick out metal slivers. Enjoyed your video. Thx

[@oliverw3646]

Well done. Congrats. No reason it shouldn't have 400k+. Now on your way to 500k

[@ianh9772]

"You're missing the bolts Wes, no we're not just missing the heads". I laughed like a 2 year old

[@98-SR5]

Actually considering the mileage, I would say that rust isn't that awful. I've seen ones of these more rotted with well less than half the mileage of this one.

[@mharris5047]

I suppose for a heavy winter state you can't complain too much considering the truck also has close to 440K on it. I am not familiar with the Chevy mid size trucks but the V8 equipped full size trucks do last a long time. My sister has a 2005 Chevy Silverado 4X4 with about 350K on it and it still runs fine. The truck has done a lot of heavy towing and the motor has never been rebuilt so she can't complain much, either.

[@EfficientRVer]

Discovered your channel a few days ago. All 4 or 5 videos I've watched have been outstanding. Looking forward to catching up on the past videos, and seeing what you come up with for new ones.

[@rsc9520]

Me too !!!

[@JR-bj3uf]

I get more excitement and good feelings over a high mileage truck that is save from the scrapper than a brand new truck for over $80,000!

[@FD-is1ug]

I've used seal-all...it works great!...that certainly is a testament to older GM trucks... impressive mileage!..with the cost of vehicles today and the lack of reliability due to EPA restrictions it's in your best interest to keep your old trucks going

[@roypearce6968]

What a gem 💎 great video how to save a truck from the graveyard. As usual you always get the stuff that nobody can fix. 👍

[@jonathanmoss5328]

Great content. Always genuine and not sold out like some of the other similar channels. Keep making this stuff. Greetings from Australia.

[@mattsanchez4893]

Very impressive fix, i admire your patience and know how!!

[@pinwizz69]

It's absolutely incredible some of the jobs you take on. It's even more incredible you have any hair left on the top of your head from all the aggravation you encounter working on Northern rust bucket vehicles. That said, great job getting that truck back on the road again.

[@terryminion7784]

I love, love, love your videos and your demeanor. You take some vehicles that are good for nothing but a hand grenade and breathe a new life into them in amazing ways. You are such a blessing to those customers who just cannot afford to replace old worn-out things and help give them more time very efficiently and effectively. Bravo! Well done! Keep up the great work.

[@WatchWesWork]

Glad you like them!

[@devinc5857]

Wes, you need a power probe kit! Awesome tool for almost all electrical work, it shows you exactly where to find Brocken or shorted wires without even taking them out of the loom!, love the videos keep up the good work!

[@ronalddavies2488]

You must be the most popular mechanic in your area, you fix what other's can't. Good job.👍👍🇬🇧

[@bostedtap8399]

I think that Wes has seen many vehicles on there way to the graveyard, $ 1200 for a fuel tank...ouch. Great work Wes, thanks for sharing

[@dlewis9760]

"But it's plastic!!! It will last forever!!!!"

[@bostedtap8399]

@@dlewis9760 only 99.97856 % will. LOL. bean counters must have calculated that using the standard pump and level design, would be cheaper than adding a screw thread to the tank, and designing a new pump unit. 😣😣. Difficult to sell a used fuel tank when it cannot be shipped, ref hazardous item, maybe fill it will water and ship it as a bowser????

[@erik_dk842]

@@bostedtap8399 I was thinking of shipping it full of water as well.

[@siduramaxde]

Impressive mileage! I'm in the process of saving a 1996 394,000 mile chevy k2500 from southern IL...It amazing the rust difference from northern IL vs Southern IL...we have it good down here(not great but better) for rust!

[@samuelgalano]

I never remark about this kind of video but you deserve the mechanics reward of the year for patience my friend. I’m impressed with your tenacity and wish you were available to be hired where I live! G-d bless you!

[@ModestoALugo]

Wes.IWish I could say more,but in simple wards,you are a terrific mechanic.God Bless you!!!!!

[@mikec6831]

You are an automotive detective of the highest order! Great job and thank you for bringing us along!

[@TechGorilla1987]

@5:57 - Sucking gasoline with a shop vac. - One of our good friend when we were in our 20's had a father that was not too bright. He was selling a used car and didn't want to sell it with a full tank, so he tried to get the fuel out of the tank with a shop vac. He burned the entire family home down including ALL their cars.

[@k9aid514]

didn't Wes say it was full of water

[@TechGorilla1987]

@@k9aid514 He did and then gave a small warning. My reply was based off the warning.

[@k9aid514]

@@TechGorilla1987 ahha did hear the warning for some reason. Thanks

[@TechGorilla1987]

@@k9aid514 No worries my friend!!! Stay well!

[@johnfalco9528]

Watching you install that sway bar reminds me of my of my ordeal on a 71 bug, took me much longer and needed a completely different fix that I won’t get into. But the end result was me brushing off slivers instead of chips. I really enjoy your video’s because of your thought process of diagnostic procedure’s and solutions to the problems. Keep up the good work it won’t be long before your at 500k subscribers!

[@c_magpie222]

Well done mate,enjoyed your video specially the way you approached to problems and fixed them,hat's off to you 👏👏

[@johnworthington9995]

As a driveway DIY mechanic in salty Wisconsin, I respect the work you do.

[@123andme]

I hear you.

[@Alex_Bessinger]

I work on electric vehicles for a living and my daily driver is a 2015 Tesla Model S that has 426k miles on it now (the original owner used it for Uber at an average of over 80k mi/yr). You'd never know it had anywhere near that mileage by driving or even looking at the car, as cosmetically it's in pretty decent shape, still drives almost like new! It's actually still got a warranty on the battery and drive units until Aug 2023, as many earlier Teslas came with an 8 yr, unlimited mileage powertrain warranty.

[@markalexander5124]

Wes, you are wonderfully patient. You are patient with yourself despite what you know. I know spit and yet i am impatient and that probably explains why i know little. Thank you for life lessons along with interesting mechanics.

[@dougmiller7643]

Awesome work Wes, pleasure watching you work

[@jeffburdess2237]

Leave it to Michigan to come up with a fix for that. Rust is so common here that kit’s probably on the shelf at every Napa here.

[@WatchWesWork]

The junk yards here sell them.

[@johntremain8403]

Wes, nice save. Hey on that fuel pump ring, you forgot to permatex the ring inner diameter to pump outer diameter gap. Water can definitely still pool.

[@beezertwelvewashingbeard8703]

I think he touched on that subject. He wanted to make sure it was a runner before making a mess with sealants.

[@InternetDude]

@@beezertwelvewashingbeard8703 no you didn’t watch to the end

[@jimmykingsborough6549]

Always enjoy watching you work and finding the solutions

[@kc360awareness]

I had an old timer at the parts store sell me #3 sealer years back. That’s the best stuff ever. Around here I never see anyone else use it, but it’s my go to for a gasket sealer. Great job Wes.

[@duncanmacrae6384]

Love the video Wes, saving things like this truck these days makes more sense than ever.

[@timdenowh95]

My experience with Seal All is that when it drys it will be hard, and gasoline will not touch it. I have repaired numerous gas tank leaks with it both steel and plastic. Good job on the repair. Love your vids.

[@mharris5047]

We haven't had a need for Seal All in years but I don't recall too many problems using it.

[@richardmarino5658]

Nice job Wes, thanks for sharing.