Scion tC LED Headlights How To Install - 2nd Gen | 2011 - 2016

Note: LEDs installed on this vehicle were for a show car and instructional purposes only. Exterior LED bulb replacements for headlights are not legal for street use in the USA. Exterior LED bulb replacements are only legal for Fog Lights in road vehicles and off-road usage. Please check with your specific location's laws before installing and using them in your vehicle.
Like what you see? Find it here:
Premium 9012 CREE LED Kit: bit.ly/2NjE587
Standard 9012 Kepler LED Kit: bit.ly/2NjIbgC
The LEDs and tools used in this tutorial can be purchased at www.PrecisionLED.com
For purchasing and production information on this LED kit or other vehicles contact:
www.precisionled.com/contact.html
Did this video help? Please support us by subscribing to our KZbin Channel. It's nice to know our customers and friends care!
00:00 - Introduction
01:12 - PLED Headlight Installation
04:04 - Outro
⇢ Subscribe: kzbin.info...
⇢ Instagram: / precisionled
⇢ Facebook: / precisionled
⇢ Twitter: / precisionled
Thank you,
-PrecisionLED
.
.
.
#TCledintall #Sciontcledinstall #sciontcLedinstallation #tCLEDLights #HowtoinstallsciontCLEDs #HowtoinstallSciontCheadlights #SciontCheadlightLEDs #DIYSciontCLEDs #DIYSciontCLEDlights #PrecisionLEDHeadlightsInstallation

[@alamocreations]

You have a video on adjusting the headlights?

[@jeisonzamora8438]

Good video thanks bro

[@PrecisionLED]

Thanks for tuning in, we appreciate the support!

[@rev-iv1363]

Add on to Renica Navea’s comment ~ I think that would be awesome about making a video on how to replace the bulb in the Wingjet Fog lights!! I’ve been trying to find KZbin videos about it for awhile and can’t find anything unless I remove the bumper!

[@seacprogrammer8455]

Clean nice video nice install , I should go look for mounting spots for 4 ballasts grrrr

[@PrecisionLED]

Thanks for the kind words! The LED ballasts on our new Quanitum kits are actually very, very small! Hardly even noticeable! Most people just zip tie the wires together for a clean installation.

[@jim1282003]

I ordered a Kepler led headlight for my 2009 Scion xB but it won’t fit when I put it in. Please advise. Tnx

[@renicanavea2508]

Thanks for a great video! Could you post one of changing the fog lights for a 2014 Scion tC? Haven't found one and would love some help!

[@PrecisionLED]

We will try to do a fog light install in the future, thanks for the suggestion!

[@frankperez7684]

@@PrecisionLED we need it soon guys. Appreciate the feedback.

[@NeoVelocity]

I thought LED lights don’t need ballasts because they have a driver to regulate the current?

[@HaydenLe]

Is the highbeam and lowbeam just one bulb?

[@PrecisionLED]

Yes, that is correct, the tC comes with a dual-beam housing, which means the housing physically moves in order to project lights at different angels.

[@jmartinez194]

udates?

[@KingOdin1028]

Install and secure the bulb into the housing first. Your lucky we’re dealing with led. Dangling a halogen or HiD would’ve definitely damaged it. Secure the bulb first !

[@donnylem8818]

Did you have to take the whole bumper off ?

[@PrecisionLED]

No, as you can see per the video, you can swap the headlamps just by reaching inside the engine bay.

[@danielluna4415]

For the 2014 Scion TC, do you need to change anything when converting to LEDs. I know that some cars need to change multiple parts to make sure LEDs work correctly.

[@PrecisionLED]

No other modifications are necessary! Our LED kit (linked in the description) comes with everything you will need to upgrade the headlights to LED without any issues!

[@808Alejandro]

How do I replace the daytime running lights, one of them went out. Do I change the bulb or buy a new daytime light. Do I have to take off the bumper to replace it?

[@PrecisionLED]

Yes, it is likely you would need to remove the housing in order to change the daytime running light. Here is the proper DRL bulb for your vehicle: www.precisionled.com/premium-1156-21-smd-5730-led.html Please, be sure to adjust the quantity to 2.

[@codenamemamba1277]

No you dont need to remove the housing. To the inside of your head light there is another socket just like the one you see above and its the same installation process.

[@austinmathews3708]

I installed my led headlights into my 2015 Scion tC and they are pointing to the middle of the road. How do I fix this issue? Thanks.

[@anthonyvasquez7050]

TrapKingz are you serious!! Mine look like there pointing at the floor

[@PrecisionLED]

Did you purchase your headlights from us? If so, please contact us at [e-mail]!

[@ddm4v942]

what about the others lights ?

[@PrecisionLED]

Here is a video on the interior LED installation: kzbin.info/www/bejne/gaPHf4WJa7OafJY

[@wayneloux1353]

😊

[@PrecisionLED]

😊😊

[@amberlyrosee7081]

Make sure you wear gloves the oil on your hands can cause the bulbs to break

[@diazedvin04]

2:40