How To EXPAND Your HX STOMP Beyond Only 3 FOOTSWITCHES!

[@BonkeyMucket]

I just got my HX Stomp yesterday and I'm watching a bunch of your videos before I touch anything on it. Thanks for posting this stuff.

[@ScottUhlMusic]

Glad to help! Thanks for watching the videos 🤘

[@Lukewalksthesky]

This is the most helpful HX Stomp video i’ve watched so far. Thank you so much.

[@ScottUhlMusic]

Thank you!

[@RealMrYouTube]

I bought a 2 in 1 expression knob from sea foam pedal. It is an expression knob with a switch built in.

[@ScottUhlMusic]

Oh sweet!

[@moments_with_IH]

i upgraded my hx stomp by getting the Xl version - ive enjoyed every second of it !

[@JoelGilardini]

I use an AMT EX50 as expression pedal for my HX Stomp, which is super cool since it has 2 outputs: TRS and TS! When I use the HX Stomp alone (for small travel setups) I use the EX50 on the TS out to the ring input, and on the tip I have an aux footswitch for tap tempo/tuner. The HX is used in Stomp mode, and on FS3 thanks the Command Center I programmed it to trigger Next Snapshot when Holding the FS. So I have all the control I need without external midi control. In my normal board instead I use HX with a mini dual aux footswitch to scroll snapshots and tuner/tap. In this board I'm using it together with a Strymon Timeline, which has a expression pedal connected to it. Here there's a Midi cable from Timeline to HX. When I move the exp pedal connected to the Timeline, its movement is tracked via midi CC, so I can use the same exp pedal also to control parameters on the HX via midi. HX is amazing!

[@briansisco5925]

Your video was Extremely helpful in showing what the control capability of the HX stomp was - it was exactly what I was looking for! Thank you!

[@ScottUhlMusic]

Glad it was helpful!

[@ASMR_HWD]

I just ordered an HX stomp and it’ll be here Thursday! I’ve watched your videos multiple times and they’re are the best when discussing the HX Stomp, Helix and practicable music know-how, etc.. I sincerely hope to be considered for the external foot switch and cable. Would be a great addition to my new HX Stomp!

[@ScottUhlMusic]

Thanks! Glad the videos have helped. This comment enters you into the contest. Best of luck!

[@ScottUhlMusic]

Hello Zacarias, you actually won the pedal, congrats! You can see the drawing on my KZbin/Instagram/Facebook stories. Please reach out to me either on my website or my social media pages so I can get that sent to you. Please do not respond to anyone who is asking you for money, I will never ask for money for these giveaways. Congrats, and thanks again!

[@ASMR_HWD]

🎉🎉🎉🎉 will do!!

[@BrianupP0303]

I've used your videos to become more and more familiar with my hx stomp and really appreciate the great content! I wanted to share a small correction in this video. At about the 1:40 mark you mention needing to use TRS cable attached to the 2-button footswitch to use both buttons. I'm currently using a mission expression pedal (with toe switch) AND a 2-button foot switch all at the same time with a TRS -> Dual TS y-cable. My stomp sees and allows me to use both footswitches and expression1 and expression2 using this TRS -> Dual TS cable. So I just wanted to share that with you! Thanks again for all the great content on expanding the hx stomp!

[@ScottUhlMusic]

Wait… really? How does that work if you have to assign how you want the external input to be assigned. You set it to either FS or EXP mode. You can’t use 4 (2 extra FS and 2 extra EXP). If I am incorrect on that, can you share what pedal and system you are using? To make sure I understand you correctly…. You are able to assign FS4, FS5, EXP 1 and EXP 2 all at the same time using the method that you are using? I’m still almost positive this cannot be done, but if I am incorrect, I will do an updated video. Thank you!

[@BrianupP0303]

Hey Scott, ya! I'm using a mission engineering expression pedal with toe-switch and a generic 2 button footswitch (not sure of the make/model). I haven't assigned fs1, fs2, exp1 and exp2 to anything just yet. But the stomp is seeing them all at once using the trs -> dual ts cabling. I'll try to do some assignments in the coming days and update you on the results. But I can confirm the hx does see all the buttons and expression pedals all at once :)

[@ScottUhlMusic]

Ok gotcha, that makes sense! However, I do not believe you can program all 4 because under global setting and preferences you have to assign if you want it to be a footswitch or exp pedal. So I don’t believe you can use all 4 at once. But let me know if you find out otherwise!!

[@BrianupP0303]

Thanks Scott! I’m finding the same in global settings as you are explaining. Apologies for the confusion and taking up your time man. I do appreciate the back and forth though. I plan to use my dual ts cable for my expression pedal with toe switch. For footswitch expansion, it looks like midi is the way to go. I’ll be consuming more of your KZbin videos on that as well. Appreciate ya buddy. Thanks!

[@ScottUhlMusic]

No worries at all! It would have been epic if that would have worked for sure! Thanks for testing it out 🤘

[@mattnunnelly6321]

Your videos have been invaluable in getting the most out of my new Stomp. I feel like it would make sense to have a two button be a preset up/down, since I typically leave mine in stomp mode, but expanding it how you’ve got yourself setup would be awesome too.

[@ScottUhlMusic]

Glad it’s helped you out 🤘

[@GeorgeWright-lk8lf]

Scott, Your videos are very informative and helpful. This is what a tutorial should be. I have a Stomp XL and a Pod Go. When I have questions, I look in your video library. Thanks again brother !

[@ScottUhlMusic]

Thanks George! 🤘🤘

[@Bukes66]

This is a fantastic all-inclusive resource for adding to the HX Stomp's switches. Thank you!

[@ScottUhlMusic]

Thank you 🙏

[@caebuvian2324]

Easily one of the best tutorial videos I've ever watched. So friggin' helpful and simple to understand and apply straight away! Thanks 🫶

[@ScottUhlMusic]

Thanks! Glad it was helpful.

[@monomartian5022]

Always positive and super valuable videoes Scott:) Kind Regards

[@ScottUhlMusic]

Thank you 😊

[@jr4233]

Bro, I'm really loving your channel. You really have a spirit of excellence in teaching! Thank you for your hard work !

[@ScottUhlMusic]

I appreciate that!

[@steveonoir]

Thank you for making these videos! I would seriously be lost trying to navigate my way through understanding the HX Stomp. I’ll definitely be picking up a Morningstar midi controller!

[@ScottUhlMusic]

They just announced the MC6 PRO which looks 🤯🤯

[@timothyhuh3310]

Great video! I need to look at Morningstar's options again. Seems like one of the best ways to add MIDI control to the Stomp. I use a DIY arduino based switcher, but it doesn't have scenes, so each switch only sends a single command. 6 switches send preset up and down, FS1 and 2, tap tempo, and tuner. I do use a Source Audio Hot Hand 3. I clipped off the ring, and mounted the transmitter to my violin. Normally I use it to kick up delay feedback by tilting my violin down to the floor, and I have a DVP4 mini to control mix on the effect loop, wah, or volume, depending on the preset.

[@ScottUhlMusic]

The Morningstar is amazing! I love it

[@artytoney2057]

Scott your the master of utilizing space, control and accessibility on helix products , thanks for all your knowledge sharing brother , hope alls well

[@ScottUhlMusic]

Thanks Arty!

[@arthurspa]

In 8:18 you mentioned that you used a Sonicake expression pedal with your HX Stomp with a TRS to 2 TS cables. One for the foot switch and another to the pedal. I bought the pedal and it didn’t work. When sweeping the values they were g going from 0 to 100 to 0 again. So the heel was 0 and toe was also 0. The reason is that the output jack for the sonicake pedal is expecting a TRS cable. What I did was to unscrew both output and input jacks, open the case from the bottom and lift the contact (for the output jack) that would touch the “sleeve” part of the TRS cable. Since we’re plugging a TS cable this change was needed. Maybe the hardware was different when you used it, Scott. Anyway, thank you for this great video. It helped me a lot.

[@ScottUhlMusic]

Thanks for the info and leaving the comment 🤘 I appreciate it!

[@jeremyrandolph6790]

I’m having this same trouble. In the way you explained how you fixed it, what did you mean by “lift the contact”? Did you mean unsoldering one of the three connections? Thanks

[@chrisleber7457]

@@jeremyrandolph6790 I just did this. There are three contacts going across the connector that touch the cable connector. On the output side you can just bend up the middle contact so that it no longer touches the cable when inserted. Thanks @arthurspa!

[@Costasmusicman]

Your video was Extremely helpful in showing what the control capability of the HX stomp, thanks very much

[@ScottUhlMusic]

Glad it was helpful!

[@deanbibb3680]

I’m planning on getting another HX Stomp and putting together a small backup rig for Helix Fooor once again. Thanks for the tutorial!

[@ScottUhlMusic]

Nice!

[@chuntoon1]

The time you take to even make your own meme 12:00 .. not only a world of education, but very entertaining videos!!

[@ScottUhlMusic]

Haha thanks! I like to keep the videos entertaining at least a little so it’s not so tedious

[@ColinDean1]

Man you totally convinced me to go full midi! Im hoping Midi through works too. I use a Widi adapter to change patches/programs off of Ableton live. Makes running my show soooo much easier.

[@ScottUhlMusic]

Midi is a headache, but always worth it in the end!

[@oao8227]

What a versatile little unit! Great video

[@ScottUhlMusic]

Thanks! And yeah, the hx stomp is so versatile 🤘

[@Margilio5150]

Thanks! I got my MyVolts Rip Cord because of your video, best purchase ever :)

[@ScottUhlMusic]

Nice! Yeah, it’s such a cool device!!

[@clintonrich60]

Excellent video. I'm an old pedal board guy that made the switch to using just the Stomp. You're videos ae my go to resource . I could use that switch!

[@ScottUhlMusic]

Nice! This comment enters you to win. Best of luck!

[@steveliberty]

Another great video Scott. I have an m-audio expression pedal, which I modifed to include a toe switch. The toe switch acts as FS4 and the exp pedal is Exp1. This allows me to treat the expression like a real wah wah - push down to enable, push down to disable.

[@ScottUhlMusic]

Oh cool! That’s awesome 🤘

[@DannyCruzCreations]

I'm sure someone's said this by now, but the footswitch to switch between EXP1 and EXP2 is good if you use just a one-button footswitch (tip for example) and an expression pedal (ring)... then you can use that button to tell the Stomp which exp function to target. In much the same way that that Mission L6 expression pedal works.

[@melihkaleciklioglu]

Since using the stomp standalone at home but with an amp with my band, is made fs4 my "panic button". It switches the loop for the preamp off and activates a model. Just in case the amp goes down or whatever. Coming from digital I am not against the idea using the stomp just like that in live scenarios, but there may be situations where the pa might not be as powerful in super small clubs where you have to have stage volume or having a big stage and being able to have some stage volume just for feel.

[@jrossgordon]

Good stuff amigo! Currently a Helix Floor user and yet to get HX Stomp but cool thing is this helped me better understand the functionality of my Helix. Much obliged sensei!🙏

[@ScottUhlMusic]

Thanks! And you can expand on the helix as well using these tips! But most people probably don’t need that with the full helix 🤘

[@topdazzle]

An excellent video Scott - thank you. Really clear and well put together, no fluff or padding, just straight to the point. New sub here from Ireland - best wishes, a fellow KZbin audio tutor guy!

[@ScottUhlMusic]

Thank you! 🤘

[@mrchecox2206]

Scott, Im always waiting on your videos man!!! you teaching a lot, make a course about how to gigs, and I know we all will get it as soon as possible

[@ScottUhlMusic]

Thanks man! I appreciate that :)

[@gerkkycossi]

Great video! The HX STOMP is the most versatile modeler out there, I'm upgrading next!

[@ScottUhlMusic]

It’s really insanely powerful 🤘

[@Mr_A_Mia]

Like always. Thank you so much for this Scott!

[@ScottUhlMusic]

Thanks!

[@marcodelucia]

I suggest the ActitioN midi controller. With led lights, all the plugs you can ask for, and 8 toggle switches. 130€. That's fair! No screen, but with learn function it will be easy to setup.

[@SvartUlv9]

This video is so helpful! Just yesterday I was thinking of getting some external control for my hx stomp so your timing is perfect! Thank you so much.

[@ScottUhlMusic]

Perfect timing 🤘💪

[@pirandello6968]

Dude, totally useful video, thank you!

[@michaelbassick7479]

This a great Scott … I use the JET pedal with my Stomp, but have been looking at two-button options that I can program. This is great!

[@ScottUhlMusic]

Glad to help!

[@jasonquarles1258]

This is the video I needed to see!!

[@ScottUhlMusic]

Perfect timing 🤘🤘

[@二加二]

M-vave and Hotone have come out with cheap 4 button midi footswitch, very recommended for a tight budget. M-vave have sell an extension usb/5 pin for wireless midi also.

[@ScottUhlMusic]

Oh nice! I’ll have to look into those. I LOVE my Morningstar, but it is pricy. Thanks for sharing, I’ll look into those

[@adrianbrearey8657]

Toggle Expression - That can be useful so you could assign volume to exp1 and a wah to exp2 if you had an expression pedal plugged in this would either be a volume pedal or wah according to which you had selected. So many more options as the helix lets you control lots of things with expression pedals it could be gain, mix, delay times or even pitch shift like the digitech whammy. I think you can even set multiple parameters and controls so you could increase reverb mix while reducing the gain on an overdrive. Then still be able to hit that toggle expression switch and then you're back to having a volume pedal

[@boimesa8190]

this doesn't work properly for me and it suucks cuz there's no tutorials...

[@marcodelucia]

Any specific model?

[@adrianbrearey8657]

@@marcodelucia Any specific model of expression pedal? That seems to be a question a lot of people ask and there's a few different ones. Line 6 do make their own and theres a brand called mission who make these pedals. I have seen the M Audio ones work too but I would do some research on this if you're thinking of buying one. You would have to adjust the pedal settings to activate or deavtivate it through presets/snapshots. It's been a while since I used an external pedal or edited my helix so a bit rusty

[@martinfay7274]

An expression pedal looks like a good addition to my Stomp XL. Definitely worth experimenting with. The Morningstar midi looks really useful but I'm not sure I want to use that much real estate on my board. Thanks for yet another great video!

[@ScottUhlMusic]

An expression pedal does help a lot for sure!

[@wellnesswisdom-vi2sb]

Thanks again Scott....My weekend with the HX has paid dividends....I watched a video where the dude said....you can add two more buttons, OK, and then you can have FIVE snapshots with an HX.....Since I control my HX with Midi, I was thinking I could just plug in a TRS adaptor and trick the HX into thinking there is a two switch pedal hooked up. But after spending some time and watching this video I don't think you can assign additional snapshots to FS4 and FS5.....

[@ScottUhlMusic]

Correct, on the stomp you only get 3 snapshots per preset

[@JMarcuslife]

This is so comprehensive and useful - thank you!

[@ScottUhlMusic]

Glad it was helpful!

[@ToneDeth.]

I got that sonicake expression pedal. Losing my mind for a bit as the calibration was always 0% then halfway was 100% then full was back to 0%. It seems like that sonicake you have to use a TRS cable. That fixed it up and now auto calibrates and no issues getting the full range of 0% at heel and 100% at toe.

[@CraigTyers]

I use my toggle expression switch!.. I have in the preset a wah and a tremolo the wah is set to be exp1 the tremolo speed is exp2 then I have one expression pedal and use the toggle expression to switch between using the expression pedal on wah or tremolo!

[@ScottUhlMusic]

Nice! That makes sense, thanks for letting me know 👍

[@ronniemwagner]

Many thanks for many hours of instruction!! I programmed presets & SnapShots. The 3 stomp buttons select Snapshots (for some of the presets.) External FS4 is preset down, FS5 preset up. (No tap/tuner.) I set the input noise gate. QUESTION: Where (if at all) should I connect my TC Electronic Polytune3? If possible, what cable should I use? THANK YOU!

[@ScottUhlMusic]

You can always use the built in tuner on the stomp. Get an external pedal and program it to be the tuner: kzbin.info/www/bejne/eGPQhIGPe7V5n6ssi=Ay1yGk_mzV3Yl18g

[@ronniemwagner]

Right, your video is how I learned to set up the external 2 button switch. But I would like to put the Polytune in front of the Stomp. And keep using FS4 & FS5 to go up & down the presets. Would the Polytune go IN to the L Mono Input? With a 1/4" instrument cable? Or 1/4" flat patch cable as one might use to connect analog effects pedals? THANKS AGAIN @@ScottUhlMusic

[@filipnovosel350]

Great video in great time! Just when I decided to expand my Hx Stomp! I’m planning to use Expression pedal and that little dual switch!

[@ScottUhlMusic]

Nice! Remember, you only get 2 for expression, so you can use 1 button and 1 exp pedal. But not 2 buttons and and exp pedal 👍

[@filipnovosel350]

@@ScottUhlMusic yeah, I got that part. It’s just that this double switch is cheaper then the most of the single switches and in some occasions I might use expression as a volume pedal in signal chain and then use the dual switch

[@BrandonMalone-x1b]

Csn hook up a two switch and use just one and an expression? I don't think you can

[@sybamunki]

Fantastic vid. Good work! I have split the TRS to a footswitch and exp pedal. All my delays are set to mix on the exp pedal which frees up a switch. 0 mix is same as pedal off. Also means i can adjust the amount of delay on the fly

[@harrisonmaas4797]

You provided very quality information, thank you. Just getting into it. Appreciated it greatly!

[@ScottUhlMusic]

Glad it was helpful!🤘

[@alexanderspeiser9889]

Great Video Scott! 👍🏻

[@ScottUhlMusic]

Thanks! 🤘

[@robertgandy4007]

My dude, this video is awesome!

[@ScottUhlMusic]

Thank you!

[@KordTaylor]

Nice to have an affiliate link to a TRS single switch. BTW from the video I was not sure you could do the TRS 1-switch and 1-exp approach but as suspected that is an approach too. Might go that route for simplicity and fitting it all on my nano. 😂

[@EdgeOfFuzz]

Awesome video! I have the MC8 and it is amazing. This definitely gave me a few more idea on how to utilize both better.

[@ScottUhlMusic]

The MC8 is so amazing!

[@kane6529]

@@ScottUhlMusic definitely I have an MC-8 and an HX Stomp! I need to dig into it deeper! It’s more than I need but I couldn’t resist! I’ve really learned a lot from your channel as I was completely new to Midi and the HX Stomp

[@briancassidy7510]

Thank you, thank you, thank you! I really love how well you explain the helix products. As well as everything else. I would be interested in seeing one of your videos of you and your band playing using one of these fly rigs. Anyway, thank you for all that you do you don’t know how much you’ve helped me with my helix and my HX stock in all of my gear.

[@ScottUhlMusic]

Thanks! Glad to help! I’m literally at a fly rig right now, and we are setting up on a stage ON a pool. Lol. Had no idea. Waiting for the rest of the stage to be setup while I check KZbin comments. Definitely going to get footage of this for some future video stuff

[@fieltvan]

the MC8 is amazing! 🙌🏻

[@ScottUhlMusic]

It really is!

[@JSvideotv]

First off your videos are super helpful!! Thank you so much! The TRS cable at 8:09…if you ran the cable OUT from the expression (wah/vol) and one into a Stomp and the other into an HX Effects, could you control parameters on each Line 6 unit with the single expression pedal?

[@ScottUhlMusic]

Thanks! And that’s an interesting question…. I haven’t tried that so I’m not sure

[@scottyldavis]

Great ! This was very useful!! Thank you!

[@darkadore]

Could a strymon multiswitch add a 6th footswitch/ would it work with the stomp?

[@ScottUhlMusic]

I haven’t used one so I’m not sure about how it works, but with the stomp you only get 2 extra expression inputs and they are either pedals or footswitches. So 5 total on the stomp unless you use midi

[@KordTaylor]

👏What a really nice, complete video. ❤Thank you! I might be clicking those affiliate links too 😀

[@ScottUhlMusic]

Thank you! I appreciate that!

[@rmejia]

Great video as always thanks.

[@ScottUhlMusic]

Thanks!

[@Alex_Martz]

The Ampero switch is less than 20 euros in Amazon, is the best and cheapest add-on, the MC8 is awesome but really hard to get as they're sold out everywhere and local retailers add a very high premium

[@ScottUhlMusic]

It’s definitely expensive for sure. But worth it if you do a lot of midi like I do

[@Alex_Martz]

@@ScottUhlMusic Yes, I want one but it's impossible to get here in Spain and their only official distributor charges a premium of 200 euros for it!, I mentioned this to Morningstar but they didn't cared

[@crocholiday]

I hope I get picked this time!! lol. I was hoping to use the amp modeling in the Stomp for bass but didn't end up loving the tones I was getting. It's likely me. Give me infinite possibilities and I'll totally ruin any decent tone lol. I've been revisiting it for the effects in hopes of shrinking my pedal board to my Noble DI, compressor and the stomp, maybe my Darkglass distortion if I don't dig what the stomp's got. A couple extra buttons would be super handy in that.

[@ScottUhlMusic]

Yeah even just 2 extra buttons is a huge help with the hx stomp!

[@tomhallmusic]

I’m guessing this would work in the same way for an LT? 17:03 Sounds crazy but I feel I need more than 8 easy to access pedal bypass switches.

[@ScottUhlMusic]

Basically all of this applies to all Helix units 👍

[@basswolf86]

I think the Expression switch would be if you have one Expression pedal but via Midi assigns - you can alternate between the two - if you don't want to have two expression pedals. Which I've guessed from watching your video and now I think I might have found a way to modify my settings - so thank you 😀

[@jakearvonen]

Thank you very much mate, awesome video

[@ScottUhlMusic]

Thanks 🙏

[@marcodelucia]

I don't want to affect the tone. Do you suggest checking for the true bypass feature for these pedals? I don't know if external switch pedals/ exp. pedals and midi controllers can affect the tone. By the way, HX stomp is truebypass.

[@ScottUhlMusic]

MIDI and or external footswitches or expression pedals have no effect on tone

[@Musicdhara]

THANKS FOR SHAREING THIS GREAT TIPS.. NOW I CAN EASILY UPGRADE MY STOMP.. CAN YOU MAKE A VIDEO ON A SMALL PEDALBOARD WHICH CAN BE FITTED WITH HX STOMP ALONG WITH TWO FOOT SWITCH AND A EXPRESSION PEDAL..!

[@ScottUhlMusic]

Thanks! And I just carried it portably in this video here: kzbin.info/www/bejne/rWWTiGadfLqpnac I still use that box to this day since the hx stomp takes 30sec to plug in 👍

[@jeffrowsell]

Cool video and would use the extra two buttons for changing modes instead of reaching down to the floor to hit the buttons all the time!

[@ScottUhlMusic]

Yup! It helps a lot!

[@TNNLZ]

Thanks for all of your help figuring out the Stomp! Maybe i missed it… what is the simplest way to use a volume/expression pedal via midi in?

[@ScottUhlMusic]

Thanks! And for an expression pedal I find it much easier to use with the expression input, not midi. Both are possible, but expression is easier imo

[@TNNLZ]

Thanks for your quick response! So if i wanted to still have the footswitch “4/5” you would suggest to do that via midi instead? I asked Line 6 the same question I asked you and they were very helpful and sent me a link to one of your vids 🤘

[@ChaosDP]

I have been using the Fractal AX8 but have thought about switching to the Stomp for a smaller pedal board.

[@ScottUhlMusic]

I love my stomp for sure! The portability and how powerful it still is is a major selling point for me

[@yukinkong5009]

Great video! I am curious about what you use to power your HX Stomp. Can you share?

[@ScottUhlMusic]

Yup, it’s the Ripcord by MyVolts. I have a video on their newer model the “Step Up”: kzbin.info/www/bejne/iIDElauJnrijeLMsi=PDnw5ZZgFToiKiW8

[@emars0]

My Vexpress is only going from 0-100-0 from heal to toe and idk how to fix it, im using a trs to ts splitter

[@dazming]

Wow thanks Scott for the video and giveaway! The little two button switch is certainly useful, as I can add it to a cheaper ampero control midi switch. I think less functions compared to any Morningstar. Maybe once you get your hands on it you could do a comparison video?

[@ScottUhlMusic]

Thanks! Glad you like the video 🤘 And I plan to do a video on the Morningstar eventually

[@picksalot1]

I've got a 2-button switch plugged into Exp 4 and 5 on my HX Stomp, and I use that to scroll up and down through my Snapshots. I've have an old Boss GT-6 that has 7 foot switches, and an Expression Pedal and I'd like to use it as a Controller for the Stomp. I did manage to get the Expression Pedal to control the volume on a Preset by linking MIDI to a Volume Block on the Stomp. I'd like to use the GT-6 foot switches to control other functions on the Stomp, like Bank Up, Bank Down, Tuner on/off, etc., but I haven't been able to get the Stomp to recognize/respond to the MIDI sent by the GT-6. I think I've got to use the "Learn" function, but I always get stuck at this point. I'm probably not doing something right. I usually give up at this point. I may have seen something in this video that might help. I can't find any videos that utilize a device like the GT-6 as a Controller as I've described. 🤷

[@ScottUhlMusic]

You cannot get more than 2 extra controls with the EXP input on the stomp. You have to use midi in that case. Because the exp input only allows 2 extra controls which you assign in global. Midi has much much more

[@picksalot1]

@@ScottUhlMusic Yes. It's programming the HX Stomp to recognize the MIDI coming from my Boss GT-6 that is tripping me up.

[@ScottUhlMusic]

Ah gotcha, I was mixing it up with another thing. Does the GT6 send midi? I’ve found Roland/Boss stuff is very difficult with midi, but if it sends midi, you should be able to get that to work 👍 I do consulting if you need to set up a zoom call. Website link is in the description

[@picksalot1]

@@ScottUhlMusic Yes, the Boss GT-6 does send MIDI, and I was able to get it's Expression Pedal to control the Volume on an HX Stomp Preset. From your video, it looks like the easiest way to get the Stomp to recognize the GT-6 MIDI is to first turn on/access that feature/mode in the Stomp, for instance the Tuner. Then turn on "Learn" on the Stomp, then press the button/foot switch on the GT-6 I want to use to turn on the Tuner on the Stomp. Does that sound right?

[@ScottUhlMusic]

@@picksalot1 yup, that's correct!

[@MarcoGonzalez-ro8wv]

Thanks for the help!!!

[@ScottUhlMusic]

🤘🤘

[@KM_1983]

Expression pedal for the Helix

[@ScottUhlMusic]

Are you looking for how to do that? I go over that in this video

[@caseykittel]

5:52 isn't TogglEXP helpful if you want to use one expression pedal to control two different things on one preset? say you have a preset that you leave the expression pedal on volume (maybe EXP 1) most of the time, but you also have a wah set up as EXP 2 for example. no?

[@ScottUhlMusic]

That’s definitely possible! I haven’t used it much, but that makes sense 👍

[@dividedbytimestudios]

So with Morningstar, you can have the looper with multiple buttons, and turn on and off reverbs delays gain etc….

[@ScottUhlMusic]

Yup!

[@mr.k905]

Hi, is there something like a dual switcher on the market (with two foot switches) that would switch between different pedals (switch 1) and scroll trough presets with the other switch? This way you would only need 2 switches to change presets on (let’s say 3) DIFFERENT pedals that have a preset feature and a TRS connection.

[@ScottUhlMusic]

If I understand correctly, that TT2 pedal might work for what you need

[@Spider._.dust_music]

Great info thx!! I’m new to the HX Stomp. Has anyone used the voodoo lab Ground Control to control the HX ?

[@ScottUhlMusic]

Thanks! And I have not, no

[@jonisbishop]

Thanks scott. Just enough detail. I’d love to know your set up for live looping.

[@ScottUhlMusic]

Thanks man! I use the app Quantiloop for my solo cover live looping which I do a review on here: kzbin.info/www/bejne/h56klKesea-rba8 My original music is a whole crazy setup in ableton with tracks, automated live looping, midi, lights, video, and more. I go over part of that in this video: kzbin.info/www/bejne/m6jYqn-ar52JnZY

[@JudaStellar]

great video!

[@ScottUhlMusic]

Thanks!

[@tehpeasant]

What I wondered is: Is it possible to use an external switch/pedal that displays (not just activates but displays) the hx stomp's tuner?

[@ScottUhlMusic]

I haven’t seen anything like that, no

[@fcallari581]

Can i use ampero switch and vexpress together? How can i connect them? Tks

[@ScottUhlMusic]

Hx stomp only allows 2 total expression inputs, so you can use 1 button and 1 expression pedal in that situation. You’ll want a TRS 1/4” to 2 TS 1/4” splitter to connect to the stomp 👍

[@giacomosavioli2705]

Hi, do you have any tip on fixing the 0 to 100 to 0 problem with the espression pedal?

[@ScottUhlMusic]

If I remember correctly it was a cable issue? It’s been a while so I really don’t remember, but it might be TRS vs TS cable

[@ronaldsmith8966]

Just subscribed, I recently found your channel, an have found it quite informative.

[@ScottUhlMusic]

Thanks for subscribing 🤘🤘

[@JDavilaDavilaDVP_Productions]

good video! Thanks!

[@ScottUhlMusic]

Thanks!

[@davidroden3799]

Very helpful, as always. Is there a way to use a footswitch as a toggle - i.e., pressing the footswitch will simultaneously turn one effect on and the other off. Pressing the footswitch again would reverse it. Thanks.

[@ScottUhlMusic]

Yup! You can assign multiple footswitch bypass assigns to any of the footswitches 👍

[@olamideogundiran6892]

Is it possible to have the midi controller and still have a volume pedal incase i need to do swells and control volume

[@ScottUhlMusic]

Yup 👍 midi pedal into midi and then expression pedal into expression

[@Lespaul70]

What does it mean when it says DSP BY-PASS press any key when I push my foot switch 4

[@ScottUhlMusic]

I’m a little confused on that one as well. It means the DSP is bypassed and basically just a pass through. I’m not sure when it’s valuable to use that, but it’s an option

[@rupesharchie]

Is it possible to assign these footswitches to neural dsp quad cortex and make them work like a momentary switch for e.g like the digitech ricochet?

[@ScottUhlMusic]

I don’t have a quad cortex so I don’t know. Someday hopefully!

[@jorgegarcia9071]

What is the TRS extension cable you mentioned?… where i can buy it?

[@ScottUhlMusic]

Any TRS cable will work

[@arsenije_wav8620]

Ugh, why did Line 6 need to make the DSP bypass block the entire screen? I want the use the stomp as a simple multi fx so I would be bypassing it all the time. Not seeing which patch I left it on during a gig would be hell.

[@LostCupids]

Could you basically do the same thing with the GT-1000 CORE? Also, can you use all three at once? Two button switch, expression pedal, and midi?

[@ScottUhlMusic]

I haven’t used the GT 1000c so I don’t know tbh. But yes, you can use all 3 at once. But with expression you only get two options, so: 2 buttons, 2 exp pedals, or 1 button+1 expression pedal 👍

[@franciscodominguezguitar2510]

Great video man! I'm thinking on getting a MC Morning star so I can control my looper RC300 and Hx stomp at the same time.

[@ScottUhlMusic]

That would definitely be the device to do it! 🤘

[@emars0]

So can i use that y cable and just use one of the non trs cables into my pedal and have the other one doing nothing?

[@ScottUhlMusic]

If you just need to connect one pedal, use a TS cable

[@emars0]

@@ScottUhlMusic trs to ts or ts to ts. sorry im new to pedals. then trs to trs would depend on the pedal?

[@SouvikRoyChowdhury]

Can a Trs to two Ts cable help with someone to use it with a dual foot switch and an expression padel? For use it live??? Need urgent help

[@ScottUhlMusic]

With the stomp, you can get 2 exp outputs. That’s either 2 footswitches, 2 expression pedals, or 1 footswitch and 1 exp pedal. You cannot get more than that without using midi

[@SouvikRoyChowdhury]

@ScottUhlMusic i want to use one Dual foot switch and 1 expression padel..... How can I do it?

[@ScottUhlMusic]

@ you can’t

[@SouvikRoyChowdhury]

@@ScottUhlMusic i cannot use that Ampero switch and one expression padel with stomp?

[@SouvikRoyChowdhury]

If you have used a processor , you have noticed when you change the preset by banks up and down it Blinks ...but on the HX stomp .. if you select the preset Up down option .. it directly take you to the preset ...any help how can i get the blink option so that i can select the perfect patch to choose??

[@ScottUhlMusic]

I believe you would do this in command center if I understand the question correctly

[@lasbragasrojas]

Can you add an expression pedal and an ampero switch at the same time? I tried with a TRS cable splitting into two TS cables but did not work.

[@ScottUhlMusic]

You can, but you’ll only get 1 button. You get 2 expression buttons, 2 exp pedals, or 1 button and 1 exp pedal 👍

[@lasbragasrojas]

@@ScottUhlMusic Thank you for your answer. So the exp pedal works absolutely the same as with a stereo TRS, while you get to have an extra FS of the ampero switch. Cheers.

[@Basertbasert]

Would it be possible to use two switches to get FS4, FS5 and also use an expression pedal for volume as well?

[@ScottUhlMusic]

Not on the stomp, you only get 2 total

[@Basertbasert]

@@ScottUhlMusic ah okay, but one extra button + expression for volume would work?