Scrapping & Cleaning Up The Shop

In today's video I scrap out a bunch of light fixtures, electric motors, & Large transformers. Thank's for watching! #trailer #trailers #welding #transformers #electric #electricmotor #recycling #scrapping #scrap #copperwire #aluminum #diy #projectshopfl #copperking #led #ledlights #lighting #generator #statorwindingmachine #electricmotor #copper
New Made In The USA T-Shirts At projectshopfl.com Help Support The Channel With A T-shirt or a PSF Sticker.
Support the channel by
Shopping projectshopfl.com
subscribing: / @projectshopfl
Email: [e-mail]
Fan Mail:
7040 Seminole Pratt Whitney Rd, Ste 25-111 Loxahatchee FL 33470
Music: Mixkit.co
Bensound.com

[@pvandewyngaerde]

That barrel clamp could use an upgrade to the shop colors now its getting more use again. Amazing work. Thank you.

[@ProjectShopFl]

Thanks, Painting the barrel clamp is on the list.

[@y.lelivelt2619]

I never seen the shop thát clean Derek. You have nice skills with the forklift!!

[@ProjectShopFl]

Thanks 👍

[@twilkinson960]

That forklift is worth its weight in gold. Not just as a time saver but as a body saver.. I love the way Steve "shops" on the trailer loads you bring in.

[@ProjectShopFl]

😂😂😂 He is always shopping. lol

[@handdancin]

forklift cam is the shit

[@ProjectShopFl]

Thanks, When I finish The cage I will have a better mount

[@HappyAst34]

Oliver is a good dude. I’m a bit older than him for sure and I appreciate seeing a younger person that is a hard worker and not afraid to get dirty. Good work ethic all around at PSF! I always look forward to what the next video has in it! I respect your honesty and hard work. Keep kicking butt!

[@ProjectShopFl]

Thank you!

[@johnnorris1227]

Those breakers are made from a real brittle plastic if you take one and slam it on the ground the plastic outer will shatter and all the metal innards will stay together. Then you just have to seperate the copper/brass from the steel.

[@ProjectShopFl]

Thanks for the suggestion

[@noneyabeeswax3200]

Yes bakelite actually,I used to take them all apart then I realized the material cannot be recycled so I’ve moved on to the smash and grab technique ever since.

[@KevinHarvey-qw5mj]

You getting shop pretty well organized you be the man you doing a job and run into a roadblock instead of going around you fix the problem to get done what it takes watching long enough to see you get that machine for stators to separate them took some doing but took time to make it work best thing you did get a forklift probably wish had one earlier but maybe couldn't afford it at the time got the crew in kick butt and get stuff done recoupe your money keeping busy just take time and hope scrap prices go up you got your shop looking good now you can get more stuff done enjoy watching you tackle challenges cause you take time and figure out what needs done you never give up cause you know what it takes and i enjoy that about you thanks for posting and I'll be waiting for next post to see how things come out thanks again my friend

[@ProjectShopFl]

Thanks I appreciate the kind words.

[@KevinHarvey-qw5mj]

Your like the wizard behind the curtain you always come up with a plan to make things better even if have to tweek it and take time to evaluate what needs done and does it I like that about you know what needs to do and some fine tuning and get it done thanks for getting back to me

[@joshsaxon4114]

Holy grammar, Batman.

[@vw8796g35]

You definitly have fun with your new toy!!!!!

[@ProjectShopFl]

Yes, I love it.

[@laurentlelouer7341]

Today, as it is easy to load and unload your trailers, it has become essential. I don't know if I've said it before, I think Oliver learns scrapping various things quickly.👍

[@ProjectShopFl]

Thanks, yes he does.

[@scrapitjc]

Game changer with the forklift. Keep doing it buddy...😊

[@ProjectShopFl]

Thanks!

[@silverlicious2086]

I like the Mini-cam when you're lifting and moving stuff. Cool perspective.

[@ProjectShopFl]

Thanks!

[@markrice3502]

that forklift is sure earning its money for sure it is a great find for your shop and you use it just fine i ran one for years in a factory so ya your doing great thank you for sharing with us

[@ProjectShopFl]

Thanks, it has made a big difference.

[@josephvalenti5155]

Keep it coming Derek!

[@ProjectShopFl]

I'm glad you enjoy the videos!

[@rickstewart9716]

Great operating skills and video. Can't wait for part 2.

[@ProjectShopFl]

Thanks! 👍

[@petermccall9354]

Foooook I don't believe it, you scrap tale has absolutely no rap on it, the first time maybe second time in all time. Big Kid. Cheers Pete, down under

[@ProjectShopFl]

Thanks!

[@LF_63]

Hi, I really do think it would be more effective and less costly to just put them breakers in the mixer with a brick. Plastic on these is so brittle it won't take long. Shop looks really good!

[@ProjectShopFl]

Possibly

[@mlj6419]

I'm just fascinated by this process. Another very cool video. Thanks

[@ProjectShopFl]

Thanks!

[@Opinionatedguy1989]

That's as clean as I have ever seen your shop. Having an operable forklift makes all the difference. Your truck looks like it needs some love. New fender, perhaps?

[@ProjectShopFl]

Thanks, I have 2 new fenders and all the light for the truck.

[@johndaley9188]

Ramp works great. Good job.

[@ProjectShopFl]

Yes! Another great scrap find. lol

[@mikeyoung5211]

Good job

[@ProjectShopFl]

Thanks!

[@scrappingonthefly77]

Getting it together i see ! Shop looks great bro! The lift seems to be pulling it's weight! Glad to see it's working out for you !!

[@ProjectShopFl]

I'm trying.

[@jimboboyer]

shop looks good,,,,

[@ProjectShopFl]

Thanks!

[@6980869]

Hey Derek, big fan. I’ve been thinking for awhile now,, about how you like to take off wheel bearings off the motor armatures rotors, and what not. I like saving wheel bearings as well. Thanks for what you do. Aloha

[@ProjectShopFl]

👍👍👍

[@6980869]

@ProjectShopFl Sorry. I meant to add to that - what is YOUR favorite way to take the wheel bearings off of motors, with as little time time spent, and damage to it?

[@vindob8429]

Nice addition,that little forklift.Be honest,how many times did you tell yourself,damn, I should have got one a long time ago.

[@ProjectShopFl]

I've been saying that to my self for years. lol

[@RobertLivingstone-n4g]

Great video nice scrapping job i can say that bench does not stay clean

[@ProjectShopFl]

😂😂😂 Hard to keep it clean. lol

[@sticksandstones1885]

You're really moving now i bet you feel like you're making money with new forklift . I can't wait to see someday.You'll have front and back completely cleaned up

[@ProjectShopFl]

I hope I start making money. lol

[@Д.Неуловимый]

Nice sound of your fork lift engine. It purrs like a kitten

[@ProjectShopFl]

The motor and trans are great.

[@scrappingonthefly77]

5:05 man that clamp is bad ass !

[@ProjectShopFl]

Thanks! I love that thing.

[@quadanonyme7259]

Good vidéo

[@ProjectShopFl]

Thanks!

[@josephvalenti5155]

A little help goes a long way, where is Oliver from, shop def looking good!

[@ProjectShopFl]

Thanks, he is from West Palm Beach

[@00BillieTurf00]

White "paper" around copper on the transformers on the trailer, does it contain asbestos? Had on like that once, couldn't peel it of and it did not burn so ...? Great new worklfow.

[@ProjectShopFl]

Thanks, I think its some type of fiberglass

[@northwest.rider.]

I think it would be cool if you did a video of your hole day working like no editing just raw footage but love the videos keep ot up man

[@ProjectShopFl]

I might go live and do that

[@northwest.rider.]

@@ProjectShopFl that would be awesome

[@kenny2644]

Good morning friend

[@ProjectShopFl]

Good Morning 👊

[@Naplesfrank154]

Good morning buddy!!!

[@Naplesfrank154]

Does Oliver ever speak? He never seems to speak while you are recording. lol

[@ProjectShopFl]

Good morning! 👋

[@ProjectShopFl]

He is kinda shy

[@Cjnchef]

Took you a while but your getting there now. Now the pieces lift. Scrap it now?

[@ProjectShopFl]

I will be fixing it now I am saving time. It's bigger and has a rotator.

[@davidbolton184]

That tool you use to lift the barrel is that a homemade or a specialty made purpose built, lifting mechanism

[@PCMcGee1]

What a tangled mess at the end 😳

[@ProjectShopFl]

😂😂😂

[@KevinHarvey-qw5mj]

Another post you could use the guys for a couple days seen air conditioner outside one could break them down just my opinion you run your dhop and I come up with ideas to run my mouth lol have a good one i know you have a plan just saying thanks again

[@ProjectShopFl]

Thanks for the suggestion

[@KevinHarvey-qw5mj]

@@ProjectShopFl looks like I should read missed words but thinking have man power get it taken care of and a little more money in the pocket and making more room thanks for getting back to me

[@johndaley9188]

If the alternator is original, the igniter from Lift Parts Warehouse is $48.60. PN 22020-G5111. I bet if you call they can tell you if the alternator is original. Or just confirm PN on the igniter.

[@ProjectShopFl]

Thanks I just looked it up. I think It was a hitachi I will have to check.

[@lioneljohnpilcher204]

How much time and energy have you saved just because of the little space saver forklift

[@ProjectShopFl]

Lots of time and energy.

[@robertabernathy9676]

Paint the Nissan name orange on the back

[@ProjectShopFl]

I am, Next time Oliver comes by I will have him paint it and the valve cover

[@lioneljohnpilcher204]

In New Zealand we are required to have a forklift license, do you? you must have aye

[@ProjectShopFl]

No license required

[@noneyabeeswax3200]

I wanted to make you aware,legally since Oliver is only an electrical intern at the shop you are well within your rights not to pay him when he’s doing any electrical work😉 Love that forklift cam it’s really in your face live action Hollywood shit. I’m not clear about the terms of the Family Dollar sponsor deal on the Jaws cart but I’m going to have the public relations/advertising department make contact with Harbor Freight,I’m thinking they could pay you to slap a couple of decals on that barrel lifter the next time it goes into the paint shop. I hit your PayPal thought maybe you would pickup a balloon for Oliver for his graduation party 😊

[@ProjectShopFl]

😂😂😂 Thanks for the info and the PayPal. I have a lot of stuff on the list to be painted.

[@grandpakevin3354]

Don't drill holes, rather weld a link on to each one and then connect a cable to each for the pull.

[@ProjectShopFl]

Weld a link to what?

[@grandpakevin3354]

@@ProjectShopFl You lifted the end of the barrel thingy. weld a single piece on chain on the end then put a cable to each link and use that to tie into one cable so you can pull the ends up to catch the top of the barrel.

[@E-BikingAdventures]

Why were you putting those large transformers on the back of the trailer? Are you not going to get the copper off those?

[@ProjectShopFl]

They are aluminum and I make more money selling as is.

[@EWasteJILL]

If the plastic brakers are brittle toss them in tumbler with bowling balls? Now that you have BIG BOY SHOP I'd soggest lines painted on floor so Da Forklift has his right away space. Put 💩 in his RIGHT OF WAY trail HE WILL SMOOCH DA 💩!! Da forklift also needs a name. He's a chill dude BUT THERE IS NO Fing Fork OR LIFT IN HIS NAME! Name Forklift contest? Pretty Please? I'll start...my entry for forklift name is: Oliver SR. 😂🎉😊 💖 from Minnesota 😎

[@ProjectShopFl]

😂😂😂 Thanks for the suggestion but I don't have something that could handle bowling balls. lol

[@mikeyoung5211]

How about 36inches of snow

[@ProjectShopFl]

No thanks!

[@davehazel1994]

fork lift already making you money by time saved dragging on pallet truck

[@ProjectShopFl]

👍👍👍

[@gregwarne3252]

dont burn so much its not good for the earth

[@ProjectShopFl]

I have a $30,000 incinerator that has a scrubber

[@TheSafetyMarshalPSF]

You've been robbed

[@ProjectShopFl]

Yea someone ate my donuts!