Really enjoy these videos and products made by you guys such as this and the dual fuel filter filtration kit. I wanted to add that for someone like myself who doesn’t have the available space to move the remote oil filter they have another alternative although it isn’t a cheap one. The crankcase can also be vented from the valve cover with a dual valve cover breather that I believe originates from the agricultural engines. Since the engine is then being ventilated from its highest point, less oil/oil vapors should be visible in the catch bottle. If the engine has a high amount of hours and or blow-by they can run two of these valve cover on cylinders 2-3 and 4-5. These valve covers are now common used on high performance builds with larger/greater than factory piston ring clearance.
@BrookStockton3 жыл бұрын
Just installed your CCV system on my 6bt today. The mechanic who did the inspection and recommended walker airseps was impressed by your solution. Especially the timing cover vent. I don’t like the puke bottle location on the port motor, very inconvenient. I moved mine further aft so I can access easier. It’s still the lowest part of the system. Simple system 1/3 the cost on new walker is a win
@SeaboardMarineIncVideos3 жыл бұрын
Glad you like it. We like that our system is easy to adapt and modify to suit different needs. Great Job!
@Vitamar06 Жыл бұрын
Hello, i have a question. I have a Yanmar 6CX-GTE. With 464HP Can this vent breather system be added to my yanmar 6CX-GTE?
@907T Жыл бұрын
Do you have experience with aqua drive? I’m thinking a level engine may help.
@jamestrinket14503 жыл бұрын
Hello can you please explain what is the purpose of the air filter that comes off the timing cover, Why not exclude the filter completely and have the hose from the timing cover go directly to the air filter via the sludge container? Regards James
@SeaboardMarineIncVideos3 жыл бұрын
Good question. The idea behind this smaller filter is to serve as a vacuum break. That is, we don't want the turbo to "suck" on the Crank Case Cavity which could encourage even more blow by. It can really create quite a vacuum particularly if the main air filter gets dirty. That said, with very high hour, high blow by engines, the volume coming out of the Crank Case can exceed the volume of air being pulled through the hose, in which case, its fine to do exactly as you describe.
@lynalllynall90822 жыл бұрын
I think that pipe is way to small a bore for that engine, hence the extra filter up near the front of the engine?
@paulvlug8123 жыл бұрын
Hi what are you recommending for the new qsb 6.7 to vent the crankcase?