Seakeeper Ride | In Depth Review

[@brettdman2908]

I have the seakeeper on my 2024 Sportsman 232 and I will never own a boat without it. The ride is absolutely amazing. I can hit washing machine waves in the ocean and the bow stays level. My old boat with trim tabs would break your back and neck in the same conditions, and the speeds with the seakeeper increases. If you can afford it, get it!!!!

[@JetBoatPilot]

So true

[@neilcigelske4454]

I have the same boat. The Ride system was standard and is vteat.

[@RichardNoggin-iw7sh]

One of the advertised damping affects is in the yaw or Y axis, and our jet boats do get a fair amount of yaw induced by sea conditions. The Seakeeper Ride definitely lessened the amount of steering inputs you had to make was greatly reduced with the system on. This would be a huge in terms of operator fatigue.

[@itresources2354]

The Seakeeper ride 450 is on my Heritage 231 and I just took delivery of the Yamaha 255FSH H over the weekend. I ran the 255FSH Saturday and Sunday and there is roll and steering identical to this video. My Heritage 231 with the SC rides a lot better. I'll be adding the SeaKeeper to my 255FSH, I am a believer in the product, big difference. Thanks

[@JetBoatPilot]

Let me know if we can help. We install and if you're not local to us we can help you find a good installer.

[@itresources2354]

@@JetBoatPilot 10-4 will give you a ring tomorrow.

[@JetBoatPilot]

@@itresources2354 8508671410

[@elmoocher]

Brilliant. Would love to see you guys put the Seakeeper (the center gyro) on a FSH. Super $$$, but the products these guys put out look amazing. I’d almost call the Ride a must have on the FSH. I’ve got the same hull on the 255 wake and I love it, but I didn’t buy the FSH for saltwater because it’s a little light and the slope of the bow looks like you could stuff it. The Ride has me rethinking it.

[@captcory]

seems to be a super fast computer controlled trim tab system. awesome!

[@JetBoatPilot]

Definitely fast. Can move up to 100 times per second

[@HarplandProductions]

Your videos just keep getting better and better, keep up the good work!

[@JetBoatPilot]

Thank you! We've worked hard to improve the quality and content!

[@YourAubsome]

Will this fit on a Yamaha 222XE with the integrated wake boosters? I saw that the Kyma K7 actually uses seakeeper as part of it surf system instead of any other type of wedge/tab/gate. Have you tried using seakeeper ride while surfing instead of Yamaha's wake booster (either the integrated or the clip on one)?

[@JetBoatPilot]

Will not fit with integrated booster models. We never tested to see if it helps the surf wave. It's very likely that it will help but have not been able to validate that on a Yamaha

[@YourAubsome]

@@JetBoatPilot thank you. I just successfully wake surfed behind my Scarab 165 ID (300 HP) lol. It only took 600 lbs of lead and it worked. I'm trying to get seakeeper installed on it but its a custom job because of the hull. Still looking at getting a Yamaha 222 but might have to go with no wake booster and get seakeeper ride installed instead.

[@Jassman3536]

I believe this system works great on 22-24 degree bottoms that are tippy. Take a boat like a 23 or 27 Albury Brothers with its less variable degree bottom really would not benefit. Those boats really don't even need tabs and trim on the motor 80% of the time is all that is needed. Correct me if I am wrong. I own both a 24 degree bottom boat and will be picking up another Albury.

[@JetBoatPilot]

I'm not as familiar with those brands as I am with jets. I'll have to take your word for it.

[@philinfrogee1880]

I would like to see a video comparing the Yamaha articulating keel system vs Yamaha Drive X and how the SeaKeeper would work on them. Can the SeaKeeper be used with the DriveX system?

[@JetBoatPilot]

Its working great with our Helm Master equipped FSH. That is the same system as Drive X. Where you'll run into issues is with the integrate wake booster on the X models.

[@Saltyscales]

Is your top powder coated? I have my Seakeeper being installed in two weeks.

[@JetBoatPilot]

@Saltyscales my tower legs are but the top is gelcoat over fiberglass.

[@edaycock3505]

Whoa! Game changer! Telling my brother about this.

[@JetBoatPilot]

It's phenominal!

[@kariwiseman6858]

Love to be a test subject on my 24ft using it in the Atlantic Ocean

[@gabepeterson4420]

Great video. Very interesting product. Question, would this serve a dual purpose that would include acting somewhat as a trim tab?

[@JetBoatPilot]

Yes it keeps the boat at an optimal pitch and roll angle at all times in auto but van also be run in manual configuration and you can do some really interesting things.

[@rmpackaging]

Do you program the zero pitch and roll with the boat on the trailer. How do you determine zero pitch? What could you measure to determine level at rest?

[@JetBoatPilot]

The system does it for you during the commissioning segment of the installation process. It's best to do that step in the water while sitting still with no movement.

[@rmpackaging]

Thanks for the quick reply. I'm just wrapping up my DYI install in Baja. We don't have a harbor here at all, so flat motion free water is pretty rare. At this point I have just stood back and leveled the trailer and boat to what looks like a zero pitch and commissioned it. Going to put her in the water today! Really excited to see how it performs. Also, your install video was very helpful. I referenced it throughout my install. Thanks for taking the time to put that together. If my situation was different and I could have taken the boat to have the system installed, I would have for sure.

[@JetBoatPilot]

@@rmpackaging I get it. That's a tough one, but sooooo worth it!

[@Michael-Miller]

When do you think you’ll know for sure on the 22’ boats with the wakebooster? I’m anxiously waiting to know if it will work!

[@JetBoatPilot]

It's unlikely it will work. I think the ride will hit the booster.

[@sethbabcock6001]

Didn't hear you mention Yamaha AR190 or 195, assuming not available for the 19'?

[@JetBoatPilot]

Yes, correct. Won't work on 19 footers

[@dcouwlier]

I was so hoping you would say you found a way for the 275 to fit it. 😢

[@JetBoatPilot]

I know, we tried. We even had the Seakeeper staff over at a 275 and we tried to get creative to make it work. There's just not enough room back there.

[@shannonkelly4071]

will seakeeper have a system for the Yamaha 27 foot boats

[@JetBoatPilot]

@shannonkelly4071 we're trying to get that answer now. Some are attempting to put a 450 on a 275. Not sure it will work though because of the extreme angle of the fiberglass in the mount zone. Would likely need lots of fiberglass work to make it viable.

[@jasonkusters5607]

Looks like the AR250 is the expensive one. Between Marco Naples Bonita and ft myers. I really need this but 8k, that’s another bay boat lol

[@jasonkusters5607]

My mom wife and kids want it lol…

[@washemJB]

great video

[@mikeperry8997]

Can a lowrance 3 in 1 transducer be installed along with this system?

[@JetBoatPilot]

Not sure on that one.

[@mikeperry8997]

Is there anyway to get confirmation on this? That would be a major factor in the decision to buy.

[@JetBoatPilot]

@mikeperry8997 yes email me at [e-mail] and I'll check into it for you. Tell me your boat make and model and year and the transducer you want to use.

[@Hamptondan1515]

How does it actually work? Thanks

[@JetBoatPilot]

It has an accelerometer inside the console area that is programmed at rest for zero pitch and zero roll. When the boat is above 20mph the system simply maintains that same zero degree angle using the electronic actuators on the left and right of the boat. The actuators control the blades which create life when deployed. The system measures pitch and roll 1000 times per second and can adjust 100 times per second. It's super effective and a total game changer for Boaters in this category!

[@nickrdgz9323]

How are those different than the Zipwake ones?

[@JetBoatPilot]

The zip wake cannot deploy its tabs fast enough to manage pitch and roll in real time. The Seakeeper deploys it's blades full up to full down in a fraction of a second so it can actively manage pitch and roll without lag. It's much more effective than any other tab system.

[@carboss2020]

I have a 2024 255 fsh sport h. How much to install this system.

[@JetBoatPilot]

@carboss2020 without optional keypad it's $7400 plus tax. With keypad it's about $300 more.

[@carboss2020]

@@JetBoatPilot do I have to bring boat to you. I’m in Naples. I’m also interested in steering control

[@JetBoatPilot]

@carboss2020 no we can refer to a local shop if you like. They may be a bit higher on install cost though.

[@kirito06]

Can you install this on a Yamaha AR 250?

[@JetBoatPilot]

@kirito06 yes doing one as we speak. Needs a Garmin MFD to make it work.

[@AllTerrain158-yl6yo]

Will this work on a 2025 252SD?

[@JetBoatPilot]

Yes as long as its not equipped with the integrated wake booster (only on 255XD models) you're good. We've installed a few and the results are breathtaking!

[@mackwoodcock7484]

Does it affect top speed?

[@JetBoatPilot]

@mackwoodcock7484 no, in fact i felt like I saw an increase in speed

[@aquilotti1987]

Are 19 foot compatible?

[@JetBoatPilot]

Unfortunately no. Sorry we did not Mention that in the video.

[@DaveBrown-t7w]

Need this for a Catamaran

[@JetBoatPilot]

Only works on v hulls.

[@acemannw]

Wow, the cost is actually less than I was expecting

[@JetBoatPilot]

Yep, the gyro system is the higher priced of the two. It works at idle power. This system works at speeds above 20mph

[@cbt826]

Don't waste your money. Zipwake accomplishes the same goal, costs less and is easier and quicker to install. You guys should test it.

[@Tevon93]

They won’t test it because they don’t sell it so they can’t make money off of it.

[@Woot30]

Great system but costs a ton of money lol.

[@brianlawler8095]

Lmao a torque wrench and an adhesive gun....bank breaking purchases.

[@JetBoatPilot]

You can't get this type of adhesive gun at any local store and it costs $500 for the one you really need to use, and most aren't going to want to spring for an inch pound torque weench.

[@Tevon93]

I’m sure it makes a difference, but there is no way it makes that much of a difference. With it off it looked like you were intentionally trying to upset the handling of the boat. Especially during the acceleration test. I’ve ridden in several jet boats and none of them wander all over the place when accelerating.

[@JetBoatPilot]

Get a ride in a demo some day and then write me back. I've staked my very hard earned reputation on this video and I don't take it lightly. It's worth every penny of what they're asking and then some.

[@DanielGrows]

I had a newer AR 240 with articulating keel and JBP's thrust vectors. In conditions just like this video the boat walked all over the place.

[@JetBoatPilot]

I can assure you my reputation is worth more than selling a few Seakeepers. Ride one of these boats with the Seakeeper and then write me back. I think you'll feel a little differently.

[@DanielGrows]

I was agreeing with you lol. I had to steer the crap of my boat in rough water because it wandered all over.

[@caseykessler6600]

Lmao it’s so expensive. That’s ridiculous

[@mauibuilt50]

BOAT

[@imharis667]

what's the different between ti's and zipwake systems. any comparison test independently

[@JetBoatPilot]

Seakeeper Ride is truly a real time ride stabilizer. Actuates from full up to full down in a fraction of a second so the goal of real time ride stabilization is accomplished by its speed. The zip wake is an automatic system but can't deploy and retract fast enough to deliver the same benefits. Hands down the Seakeeper is superior.