Sealing Machine PET & PP cups

[@pixelbat]

Have no use for a sealing machine, yet here I am going down a rabbit hole watching videos about this. what am I doing with my life?

[@nasareomontez]

what type of brim do the cups you are using and will they work with u brim series

[@Mossad901]

What if the top of the cup is wet will it still seal

[@yamillea7950]

Hi! Can you please tell me why my machine wastes A LOT of film? I set the black square right in the eye, but it passes like five squares before it cuts and seal.

[@abdat960]

Could be the sensitivity of the eye. The sensor may have a flat head adjustable screw (usually a plastic screw) that increases/decreases sensitivity. Increase sensitivity in quarter turn increments and test.

[@dudubrodzeli2002]

Can you seal coke? I mean dose not it explode because of bubbles coke has?

[@cecylemus912]

GREAT INFO THANKS SO MUCH

[@tohrurikku]

At the moment plastic straws are being phased out because pretty soon they will be illegal in Canada, are paper straws strong enough to punch through these lids? Are these lids recyclable? If they are not how hard is it to take the lids off the cup?

[@mctran41]

There is paper seqling film !

[@michaelbastienne6602]

Are these still available to purchase??? If so please do let me have the info

[@dudubrodzeli2002]

Do you sell the machine as well?

[@SV-ii6fy]

do you know sell good pp cups? I am currently using the pp 16 oz from karat and it is very thin that sometimes it will Crack on the side.

[@cupprintingtexas9166]

Due to competition, manufacturers lower prices by reducing the thickness of the cup or they introduce larger amounts of (non-virgin PP) into the cup. Usually, customers looking for a higher-end cup go with PET cups. Yes, the PET cups seal just fine as long as you use PET film with your PET cup.

[@martecarlos3582]

Still available how much?I need one please

[@xz86]

still in business? your website wont let me send email. something about incorrect confirmation code.

[@aiqinhai1]

U are genius

[@sz8235]

Do all cup seal machines support both PP and PET films?

[@cupprintingtexas9166]

Yes, in this Boba Tea cup sealing application all sealing machines can use both PP and PET film. You can play with the timer delay settings so you can seal the cup for longer if the film is not sticking. Or temperature settings to fine tune your machine to be just right for your cup/film combination. But I have found that factory settings pretty much work for both PP and PET since there is not much variation in film thickness.

[@georgekibakaya2803]

Please let me know the FOB price for such machine

[@LuisRamirez-ti3gn]

It Work in the jar glass?

[@abdat960]

No, only plastic PET and PP.

[@quelinajordan]

Is there a sealer to use with Styrofoam cups?

[@cupprintingtexas9166]

There is, out there, in the world wide web. I don't know anything about them but think about Maruchan Instant Noodles foam cup, it is sealed. So yes it is possible.

[@sonnychagani5583]

How much is the cup sealer machine

[@ts-dl8cb]

So PP foil don't stick on PET Cups?

[@cupprintingtexas9166]

That is correct. Thank you for pointing that out and bringing it to attention. You must buy film that is the same material as your cups.

[@faristeaworld5025]

I need the sealing to open like a Yoghurt

[@abdat960]

This setup is a permeant seal, unlike yoghurt cups. Same style of machine is/can used for yoghurt style tearing open but the difference is in the material of the film cup combo

[@RosaleneDacera-Quirido]

How much po

[@jstudios1946]

Your website isn't loading... I'd like to get a quote for 3,000 cups with graphics

[@abdat960]

Yes our website is having issues and we are looking into it. You can still contact us on our facebook page.

[@abdat960]

facebook.com/texascupprinting

[@abdat960]

in the ballpark of $500 for 5000 cups add $100 for shipping. It really depends on many factors like what size cups you want, how many you want, where is your delivery zip code etc..

[@jstudios1946]

@@abdat960 Sent message on FB. What I want quote for is 16oz PET and PP mixed. Need pricing for 2 sided graphics (1 logo and backside nutrtional facts). ZIp is NJ

[@erica8773]

Hi. Where can I buy this machine?

[@cupprintingtexas9166]

We sell it. Fill out the contact fourm on Cupprinting.com and let us know what you need.

[@cupprintingtexas9166]

We sell it. Contsct us at www.cupprinting.com

[@ShaneShootz]

What is wrong with your site.

[@imgood2u]

Where can I get the custom seals from?

[@espinosas19]

More info pl

[@cupprintingtexas9166]

Contact us at www.cupprinting.com

[@tdecarlo7395]

Do you still sell that machine?

[@cupprintingtexas9166]

Yes we do

[@aijajahmad1351]

Hai

[@abdat960]

Hai x2 www.cupprinting.com