SEIZED International 125E Track Loader Sitting For Years Will It Run?

[@keithgoodman762]

Haha…scared the mouse out of the engine at 15:07

[@AB-bg1or]

haha, I saw that too!

[@daygalangford5328]

He ran up out of there

[@JacobusCoetzee-w3h]

He was like oh crap imma outa here 😂😂😂😂😂😂😂😂😂🎉

[@BlueMooseTraveler]

that was mighty mouse holding the crank... lol

[@MichaelOhlhausen]

I wasn’t sure if anyone else was gonna see the mouse

[@LenInMI]

15:06 did anyone else see the mouse escape when he cranked it?

[@scottc9494]

Eviction notice served.

[@NwaHp3]

Guys I think he knew about the mouse as he has to edit these videos and included that part in.

[@TheOtherBill]

Looking through the comments, it seems EVERYONE else saw it! 🤣

[@mrfishbulb7187]

I think he blendered a mouse nest in the cowl when it finally started!

[@quilmesdave]

Hahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahaha!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! It was so funny!!

[@kdog622]

15:17 poor mice are saying " there goes the neighborhood!"

[@T.R.U.M.P.]

Lolz

[@RedneckMechanics]

NNKH the only channel where you can watch a skilled mechanic revive old engines followed by a 4k close up shot of a slug and plastic wrap. Gold 😂

[@ThatPartsGuy]

The mouse is gonna get more comments than the tractor 🤣🤣🐀

[@Thermopylae2024]

💯

[@pjofurey6239]

Ninja mouse was holding the flywheel , Chris,s jump pack done for him

[@feliperodriguez6885]

yessss.

[@chayceroberts2956]

The mouse😂

[@zinmaker2522]

I was going to make the comment "mouse eviction"

[@zebadayusw901]

Can’t people just be grateful for your efforts without being rude. I enjoy your stuff. 👍

[@dandare2829]

Second that 👍

[@Reddustdiaries]

Unfortunately KZbin has gone like Facebook! They just can’t help themselves! Instead of just enjoying the lounge chair legends have to have a say ! All the good bigger channels are full of the haters

[@Wolverine-ky9gk]

I enjoy any kind of content he does, I don’t care if it’s cars, motorcycles, boats or construction equipment

[@Reddustdiaries]

@@Wolverine-ky9gk 100% mate me to ..better than television..I’m subscribed to so many good people and they cop it every day from trolls

[@Alstonar80]

Homie don't play than.

[@bradleycavrak8013]

I love when he said that we'd want him to attempt to crank and blow past that seized spot. Ypu read our minds Chris!!

[@markae0]

Only because he had nothing to lose, it was going to go for the melt metal weight. To bad the hydrolec hose blew out. He might have got it down the drive... but loading it on a truck that hose would have blown as loading would be the equivalent resistance to the bush he was running over when the line blew.

[@jnemedia1]

I just like to say, I really appreciate the detail that you do on this these programs. At 80 years old, I always learn something from you. Thank you and merry Christmas.

[@Mouthy_Trucker]

stop lying, you ain't 80 "jnemedia1" 🤦🏻‍♂️🤦🏻‍♂️🙄🙄

[@charlesdempsey6553]

Loved this video! Loved seeing my Dad's front end loader running! It is an amazingly powerful machine and i hated it just sitting and rotting! Thank you so much for all ur work up here. The drone footage was beautiful and i loved Mr. Turbo! I thought i was the only person with a pet slug. 😂

[@danielhall4776]

Content is under rated he’s one of the best

[@dieterlange7581]

He is thee best mechanic I have ever seen and I'm 60 yrs young. Go Chris. 👍🍺🍺

[@fishing-electrician]

I admire your work ethic, you’re not afraid of hard work or getting dirty!! That’s rare today .

[@YogurtSnipe]

Yeah I’ve witnessed far too many of my age group be literal bed bugs.

[@Cabalero24]

боязнь испачкаться?! чувак, что ты знаешь про веселье? )))

[@toddkraus5592]

That mouse was EJECT! EJECT! Both of them… the one out the front when you first cranked it! 🤣👍🏻👍🏻❤️🇺🇸

[@pclayton5063]

It never ceases to amaze me how you can get just about anything moving. Hope you and your family have a great Christmas and will be watching for your videos next year.

[@TheStrongingrace]

Diesel Creek may be up to buying this . He is here on you tube ...... he loves them and brings them back to life ... Love all your content and Merry Christmas ...to you and your family ...

[@kevingilmore9366]

Nothing more satisfying than hearing an engine startup after sitting for so long. Nice job Chris. Love your videos.

[@artieb997]

15:05 that mouse 🐭 evacuated the ship 🚜

[@dejock70]

Gradually becoming my favorite content creator. The hardest working guy in will it run and drive.

[@claztube]

An amazing mechanical master of all things that turn over... I say again, "OMG..OODNESS.. ...is there anything Chris doesn't have the "Know How" to get going?"

[@CHP8469]

Chris is a badass along time ago..

[@omar7000y]

Follow him from Great Saudi Arabia. You are a strong and practical man. May God bless you.

[@bmwpete65s55]

Chris - you're too humble. You say you don't have much experience with the heavy equipment but you still got that old beast running and then proceeded to operate it like a pro! Merry Christmas to you and your family, enjoy the holidays and we'll see you in 2025!

[@Nebbia_affaraccimiei]

proceeded to break it for no reason....

[@myronsherman8571]

I said the same. Move it make sure it works move on

[@janeames1513]

@@Nebbia_affaraccimiei what exactly did he break?

[@1956model1]

Coffee, bagel with cream cheese, and a new video from Chris. My Sunday morning is complete. 😁

[@rickbareman2263]

Thanks for saving a usable piece of equipment 👍👍👍

[@daviousmaximus6446]

G'day from Australia Chris, All the best for Christmas and the new year to you and your family. Thanks so much for the entertainment and know how.

[@snafu350]

15:06 - I SEE A MOUSE!

[@gispel7058]

Chris is Chris......a one of a kind

[@wilburnmartin5706]

Nice that the mouse decided to leave when you first got to spinning it over with the starter

[@mikechmarnakis2103]

Day is already better nnkh new video

[@Alstonar80]

Finally, thanks Chris. I loved the Caterpillar track loader video; it’s what made me subscribe.

[@blueslexie]

The best, fastest, nicest, alround, mechanic i know......... Cars love him, as we do. Love from the Netherlands, and Merry (Chris)tmas!

[@dandare2829]

I see what you did there, nice 😂👍

[@claztube]

Well Done... If you put the suited pair together you get... 'Chris-Jenn' ✝ For all I know the pair now with Autumn, Gus & Turbo just may actually be followers of Buddhism.

[@StuShoots]

The slug breaths through that hole!!

[@markmyers454ss]

Wish I was closer I would pick up that old beast. Just found your merch site and got me a hoodie too! Nice

[@HoraceBassham-o2l]

Chris I just started watching your channel but I never in my life saw someone as good as you in the mechanical world,even my wife start asking me if you take over my life,just to let you know you have a special talent take care of yourself and your family,NY Westchester county

[@ognqnmarinov7794]

Greetings from BULGARIA ,love your channel ❤

[@Vern.Anderson]

You are awesome dude! Most people wouldn't care as much about a non-automobile revival. You didn't give up so I think that is pretty awesome!

[@GuildOfCalamity]

That hole on the side of the slug is the pneumostome, it's used for breathing.

[@squirrelorama]

I love that Chris called it a "sensor" 😂

[@debi6598]

It's so awesome to see a fellow Slug 🐌 lover! I think they are so cute! 😁

[@stevenpoff6273]

From baby swings to heavy equipment this is Great Chris is all over the map I like it.🙂😀😃👍✨

[@billyhaddock5540]

Great that ur got the 125E track loader to run, bad about the hose bad. Super mouse got out of there. merry xmas to everybody..

[@tacticalwarriorviking5089]

You know your boy Camarata wants it. Even if he doesn't need it.

[@Blackhawkae69]

Chris, you are one hard working man! Hat off to you my man, having 2 young kids of my own I know how tough it might be right now yet you keep working your butt off with a smile on your face. Merry xmas and happy new year to you and your family!

[@Johnsmusic416]

The Mouse was the highlight!! LOL Always enjoy your content. Merry Christmas!!

[@Mickeyd-ys7cb]

Is there anything you can’t fix. I watch your channel all the time it amazes me the things you do. You help people in need just wish there were more people like you the world would be a better place

[@Isthatyoudermot]

Thank you, Chris. Love your channel. Your passion for everything you show us is fantastic. You take us scrapping, on vacation, climbing old chimneys, boating, cycling, building and you top it off with sunsets and aerial train shots. Merry Christmas to all of you, including your fabulous neighbors 😂. ❤❤❤.

[@billydotcom9612]

I've never seen NNKH pass up a boat and trailer! Nice work on the International.

[@patmcgaha8120]

Always enjoy your episodes. Merry Christmas to you and growing family.

[@colinsdiecast164customs]

Another great rescue, well done for not giving up on this one, a great piece of plant machinery, well worth fixing up.

[@tommieriddolls]

Chris so glad to see you back at a will ot run in the field! Been a subscriber since you started and I will admit I am not as stoked by your junk or flip videos... it seems like soon as there is some life you sell it. For us it means the funs over! Still a faithful weekly watcher of course! But glad to see you working on stuff like this.

[@johnogan2386]

You can always call get ahold of Scrappy Industries or diesel Creek those two guys are into buying older equipment and they'll probably jump on it if they decide to

[@tunafish2521]

What I like about NNKH is that it is well produced, but not overly produced. The knowledge shared is practical, not comedic. The repairs are made like most people would tackle them, not as a high end shop with infinite funds would tackle them.

[@MrPhotodoc]

A little bit of everything with NNKH and that's the way we like it. Thanks for this edition. Merry Christmas!

[@richardphelan8414]

That's a screaming deal on the dozer even if you had to replace every Hydraulic Hose on it , Merry Christmas to you Jen and Autumn ,Looking forward to your videos in 25

[@iantribe1166]

Hey Chris I thought about you yesterday I'm a road side technician in the UK and I attended a break down yesterday on a believe or not a dodge camper a bit like the mystery machine out of Scooby-Doo for a crank non start. Started thinking about what you would do. it had spark and fuel then I remembered what you had previously said about the carb floats stick shut gave the side of the carb a few hits and off she fired it had not run left standing for 18months not as long as some of the stuff you go to but felt good to use some of your tricks that helped👍🏻

[@reyong4217]

Dang, NNKH, you’re awesome dude. I wish I had your talent on fixing anything. You got old rusted bull running.

[@daygalangford5328]

I can’t believe you got this to run!

[@williamsullivan7635]

This is one of my favorite shows.This dude gets some real rust buckets running and driving! really cool stuff 😎

[@jwmaclellan]

Merry Christmas man if you had some 15 or 20 ounce coffee mugs that were kind of beefy with your logo I would definitely be a buyer. Enjoy the rest your day, bro.

[@AdamCanFly]

Another great video! That’s some serious no nonsense know how! What a great deal! I hope it goes to a good home! Merry Christmas! 🎄

[@HotRollBrad]

Sunday Brunch with NNKH ! Watch all the commercials for you!

[@MAXDAMU]

Hope you’re good brother….just locked up in jail or something. We miss you. Take care of your family. Family life is hard…but so worth it. Work hard.

[@billmyatt1438]

Awesome You will tackle any thing! Happy Holidays!

[@CAFEX24]

Run Mickey run 15:05 the thing is about to blow!

[@jorgeluisGovea]

Thank you Chris for this year of great videos. I know it takes a lot of work to make them and I congratulate you for that. Greetings to your wife and beautiful baby. May the coming year be full of joy and happiness for you. Greetings from this humble follower from Ecuador.

[@TV-yr8su]

You are worth your weight in gold. You take on challenges most people would walk away from. Happy holidays to you and your new family.

[@AB-bg1or]

Surprised you didn't do a quick walkaround of that old boat.

[@donnieporter7890]

Always impressed with the way u tackle the impossible Merry Christmas i know it will be a special one

[@taurota1554]

Thanks for sharing and taking us along

[@LoveClam]

Leaving a like and comment for the algorithm. Merry Christmas to your little family my man!

[@williamward7707]

Thank you Chris for another great video, and Merry Christmas to you, Jen, Autumn, Gus man, Turbo, and lastly the Slug...you have such a kind and caring heart Chris...God Bless You....wm

[@charlesdempsey6553]

Totally agree! Loved that Chris and Jenn liked the slug!

[@fullerblacksmithing7954]

It's really funny since I watched the 977 video again earlier today, and thought, "Man Chris really needs to do another heavy machinery episode again" and here we are.

[@DIRT-BOSS]

Looks like a solid unit with a little TLC 💪

[@frankkelly2245]

Chris you’re amazing. Live for these start ups!

[@timsowryfoto]

Happy Christmas Chris & Co thank you for the entertainment all year.

[@edwardhughes3240]

When you empty each of those rolls, save the cardboard center roll. If you ever need to burn a large brush pile, soak the cardboard with kerosene and use a stick to push it under the brush, then light! Eddie

[@jameslomaxeo2518]

I always, look forward to your videos. Merry Christmas to you and family 🎄

[@MikeyPatrick]

Dude, you just never stop. Have tools, will travel! No problem too big. And having a ball bringing old equipment to life. Like Frankenstein telling his monster “Live!!! Live!!! Very Merry Christmas to you and your precious family.

[@jeffreynavallo6684]

Chris nice toy for Andrew Camarata!

[@david92kenny]

Tbh great to see the old the older machines getting some attention not enough mainstream channels doing this, great respect as always Chris

[@Franco66]

I like that milwaukee is now making 2 in 1 with built in hammer. Gonna have to go to Farm and Fleet.

[@joejarecki-bf8nv]

Dude that plastic sticky on one side is used for contractors doing inside work on existing homes so you don’t get the carpet dirty very good find!

[@pouwakaruwhiu8349]

Merry Christmas and a Happy New Year to you and Jen and baby, greetings from Australia 🦘

[@dannylyons5899]

Scrappy Industry or Diesel Creek might be the guys for this unit.

[@alienapks]

Nop .. Cris is the man here on this channel not scrappy😂😂

[@rogergonsoulin9675]

Chris, you are a BEAST in a great way….this is a closed block of steel to us laymen but you’re able to bring it to life, wow

[@johanlaurasia]

Merry Christmas to You, Jen, Autumn, Gus & Turbo !!!!

[@brianscott7051]

Love this I had two of these back in the mid 90s around the same year. One I used for parts I had trouble with torque converter seal leaking I took the motor out like 3 times to put seals in it . Heck I got pretty good taking the motor out. I ended up taking it to international in Atlanta turns out all the bearings were shot that's why the seals kept coming out. I paid 2500 dollars to fix it right. Never had a problem with it after that. Thanks for showing this it brought back some great memories!

[@iamgroot0.233]

Happy Christmas Chris and Jennifer, see you in the new year🎉

[@dcallan812]

Oh nice a bit heavier than the usual recent vehicles. love the video Merry Christmas to you and the family.

[@backlineguy]

always enjoy tagging along on these 'will it run' trips...you are an amazing mechanic! Merry Christmas to you, Jen, and the papoochska

[@bobdrane5224]

Nice one mate,regards and merry Christmas from the UK

[@johnscholefield2023]

These videos are really good, informative as well as entertaining. Writing this from a frozen Sheffield in the UK. Keep em coming Chris. Good work. Even though I don't always know what you're talking about. 😅

[@mrclaus859]

Thanks for posting Chris

[@joejarecki-bf8nv]

Awe no, but you did it again,it’s all those years of study that got you going and you did damn well my brother from another mother!

[@79antigua]

best mechanic on ytube

[@claztube]

Yep, That's Five Out of 5 's Chris is overstocked in "KNOW HOW" It is heartwarming to see Chris and Jenn now commited to a family beyond their two fur babies. JenniferAutumnGusTurboChris A winning Full House! p.s. I guess the backyard squirrel may be around still, though I haven't seen him in any recent productions...

[@mrbussey]

I believe you can get just about ANYTHING started! Thanks for another year of great content, Chris!

[@DrivingSander1970]

You just evicted a mouse from his house at 15.05. It didn't like the noise.. 😂😂

[@cheapchip]

I’m waiting to see the new/old garage all organized!!!!

[@markae0]

"Diesel creek" should come an get the machine LOL

[@rcaddict69]

Diesel Creek or Sam from Scrappy Industries, this one is right up his alley

[@CaptainAtSea]

Chris, your dedication and hard work are truly inspiring. Your videos are not only informative but also a testament to your passion and expertise. Keep up the amazing work; you're my favorite content creator!

[@johnstephens1965]

Amazing job Chris!🎉

[@terrypauley9006]

On the left hand side of the machine as you're getting up drivers left, there is a power shut off. If you'll move the locking device out of the way and twist it, you will have power to instrument panel

[@msomusicco]

wow, good job getting that dozer going. 1,00 bucks for a dozer like that is a great deal if you have a big enough property for it. Last time I bought a large loader I hired a guy with a truck to haul it. It wasn't really that expensive.

[@Wass1967]

I like your content. It's always something different. But similar. I like the extras you show of just you being you. That's why everybody greet you like they know you. Let that sink in. We think we are friends with you when we greet you. So we May come on kind of strong. I'm one state away. Wouldn't mind drinking some beers with you lol