Sena 20S EVO Battery Replacement

Amazon Link amzn.to/3Rlnr66
Patreon: / kirkjohnson
Paypal donations: www.paypal.me/14wntr
Store: www.amazon.com/shop/illinoisb...
Shop Merch: teespring.com/stores/kirks-mo...
K-LT Shop Poster: www.ebay.com/itm/132241883054
Contact: www.kirksmotorrad.com
A video created by Kirk's Motorrad Shop. Please work at your own risk. We are not responsible for any damage you do.

[@manuelwinkler9914]

I have just changed my battery as well. You really don't need to break off this plastic edge. Instead, you can push the contacts out of the casing (they are lightly glued), then reinsert the circuit board, and afterwards place the contacts back into the casing onto the contacts of the circuit board. 👌

[@denislafrance84]

Dont need to break that little ledge, after remove the battery just push out the outside connection by pushing it by inside whit a small screwdriver it really pop out easy then after installing the new battery and the mother board all you have to do reconnect both connectors in one step.

[@kenwallace2461]

I was struggling with getting the pins back in. Your solution worked like a charm! I didn't quite go as far as you but the guard bends quite easily. Thank you!

[@YouMotorcycle]

You're the best BMW How To channel on KZbin man. Keep up the great work. Love your video on the G650GS oil change btw.

[@dougv7728]

Ordered the battery and did the replacement. Video was a great help.....

[@03flhtcui]

Perfect timing that I found this video. My Sena 20s just died. Time to replace it.

[@grampasmurf4761]

Well Done ! Thank You Kirk !

[@sutiyotiyo4357]

Terima kasih om udah di kasih tutorial nya

[@davidbrooks8061]

Excellent video

[@jubiletabustamanteserrano2446]

BUEN TRABAJO

[@shamoy1000]

Nice.

[@denislafrance84]

Thanks for the video, i did replace the battery, and now it's charging BUT there's nothing that coming out of speakers ?? any idea ?

[@kirksmotorrad]

You better have a look at the pins to make sure one didnt get bent

[@stevenprager203]

Thank you. Great video.where do mi find the LINK for the replacement

[@kirksmotorrad]

amzn.to/41LCbjc

[@JorgeLopez-mb9iw]

My sena 20 will charge but wont power on. Anyone have an idea why?

[@kirksmotorrad]

You may need to contact Sena about it. Sometimes they will still warranty them.

[@pyro707]

So I’ve done this twice. My Sena 20s evo will not hold a charge. It will completely die and will not charge again. I think it’s my hardware board issue🤷🏽

[@tonymarsden2628]

I had the same issue.. Try pushing the reset button on the back and charging.. You might have to do it a few times, it worked for me.

[@kioskete]

Just underneath the plastic connector, where the battery hook is connected, there is a connector that might be unshielded and might need some tin to weld it back on. I had the same issue. In this particular video, he does not remove that secondary board, but as you can see there are 2 screws, once removed you will be able to see what I am talking about. Hope it helps. I had the same issue.

[@kioskete]

Of course, you need a soldering iron to solder.

[@StefaManuMoto]

Nice to see a video on this but removing the motherboard like that could easily damage the pins or the connection on the pins on the main board. I would suggest prying the main connector as in my video to eliminate the possibility of damage. Sena 50S Intercom Battery Replacement kzbin.info/www/bejne/fmG9qIOLrLaqpc0