Sensitive Boost control! Send us to the Moon!

[@jacobswrld4835]

Thank you for fitting me into your guy’s super busy schedule! 100% satisfied and had an awesome day hangin out with you all. Can’t wait to hit the track!!!

[@jayrodz3122]

What kind of cams do u have in the engine sick 🚗 car tho 🤘👌👍

[@kurtnichols3720]

What turbo is that?

[@angusgraham3028]

Jake C what a beast man. Whats the set up?

[@drate100]

Was a great experience

[@jacobswrld4835]

Car has a gsr motor, darton sleeves, eagle rods, carillo pistons and the cams are just gsr cams, nothing crazy really just all “off the shelf stuff” And Brent said the reason why it sounds wierd is because of the design of the headers and like the way they are formed or something like that.. Smoke is from oil blow-by in the turbo, the drain hose is too long and there is no downward slope to actually drain the stuff, just need to cut the hose to length.. I bought this car with the motor already built and Nick did an AWESOME job building it but, everything else I’ve pretty much just added to it. Turbo is a borg warner S472 :)

[@CleetusM]

I hope Jamie held me on those last pulls 😂

[@jusshma]

Only to a certain extent, you one tall sumbitch 😆

[@kutlusskustom9463]

Making sure you were there to help with the giraffe tune!

[@GearsNCarpentry]

Cleetus!!! Always giving other youtubers love. Respect my Florida Man.

[@pdxmix]

At 13:36 you can see him coming in clutch with the reach around

[@jake318HD]

Lol "oh jamie hold me" 😍

[@minesbetter3504]

You know what I absolutely love, that really hits at home every time for me? It's that Brent calls everything a hot rod. There was a time I would get a bit sad and depressed on how my car may look, because it doesn't necessarily look how it "should." So Brent calling everything a hot rod really put that into perspective. It doesn't matter how it looks, or how it's supposed to look. It's just an expression of us. Putting heart and soul into a build makes up for it not looking like a show car. "Not all show cars are race cars. But all race cars are show cars."

[@wesley8599]

I always say the best look for a car is that it runs really well. I'd rather take a car with chipped paint fading, different colored fenders(I couldn't do without a body panel) that runs like a top than a good looking, unhealthy car. Both is always nice though

[@802Garage]

"This is piston ring to boost control... I'm breaking through the laaand. Valves are floating in a most peculiar way. Bearing clearance very different, todaaay!"

[@TnTravelers33]

802 Garage all I could picture was Adam Sandler on mr deeds

[@spankthemonkey3437]

802 Garage I'm thinking Star trek the original one

[@802Garage]

@@TnTravelers33 😂 I totally forgot about that scene.

[@802Garage]

@@spankthemonkey3437 Is there a meme video I'm missing or something? Haha.

[@claytonandrews251]

Captain Tom

[@TokyoCollins]

I just love how stoked you get on peoples builds and how you feed on the energy man! You guys rock

[@Tombstonetunes13]

Always a good time when you get the PFI NOTIFICATION 🤘🏻

[@LS__812]

RAD TIME!

[@mtech1961]

Put a SSD (solid state drive) in that dyno pc, then it wont freak out with the vibrations.

[@kserieschris3543]

I was waiting on Jamie to ask the owner the specs on the build 🥺 That’s no hot rod that’s a effin MONSTER‼️

[@LaloVega21]

Mind blown about the alignment. Had no idea. Love these videos learn something new everyday!

[@jademorris3838]

You always say thx for hanging in there, but brother we are hanging on!!! That was a power house for sure. Good work team pfi

[@rpmevo8]

Almost sounds like a slightly cracked ceramic on the plug or possibly the porcelain. At lower rpm’s, it’s taking the path of least resistance to the head and when the voltage increases it makes the full length to the ground strap. NGK plugs are so robust and well built, they’ll run like that. I had that happen in a Grand Am and it DROVE ME NUTS trying to figure out what the miss was. Also had a car with an injector harness vibrating loose at certain rpm’s. Replaced it so it could clip all the way and problem solved.

[@whitetailfreak2275]

What's better than drinking cold beer while watching Brent tune your car? Love the content!!!!

[@jimhiscott2918]

.....drinking coffee

[@oldfart43311]

Brent is really Santa, He brings smiles and joy to all the girls and boys!! Always a pleasure bro.

[@pFbSpecV]

That made some awesome power!!! He was super excited and that's gotta be the most rewarding part for you guys at pfi!!

[@TnTravelers33]

Hang some sound deadening blocks from the roof to help soak up some of the reverb they sell them pretty cheap online it’s similar to what’s used in old lunchrooms or old recording studios

[@williegamer800]

I love the white noise on the audio. U know its making some steam when it does that 🤤

[@slimbob8913]

You guys are so lucky to be able to do what you love like this! Awesome!

[@kheff46]

Those dudes eyes glazed over when you described how smoothing the powerband was happening!

[@mikehunt8375]

It's really strange but I've noticed it's a trait in most people today... NPC's?? Their attention span is about 2 seconds

[@hegeliandetective1034]

Horizon Gray Metallic is such a good OEM color. Has a purple/blue hue, and pearl in it, looks great in many lighting situations. Also a big fan of Iced Teal Pearl

[@Pato-ARG]

the toe in data is on point, besides more grip if you have toe in it makes the tires straight when launches,if you have cero toe or toe out when you launch, is even more and slows you down a lot

[@Yagba09]

18:00 @PFI hey Phong! Glad to see you in the video!

[@Pshingtnn]

Sloth he’s about to dyno his crx!

[@Yagba09]

@@Pshingtnn oh really!? Man I can't wait for that video to pop up. It's gonna be sick!

[@jamesmay6674]

Great video guys! Love the door coming up and going down.. so respectful to the neighbours! But seriously how do you guys not get away with it like Cleetus?? Crazy!

[@gullreefclub]

Cleetus’s shop is in an industrial park and his house is in the middle of nowhere, If you look on Google Earth PFI shop has a house quite literally almost across the road from them.

[@eastyyx]

Thanks for the content as usual Brent! I'd love to learn you're tuning process and how to set up 2 step on hondata etc I think a lot of us enjoy the educational aspect of your videos as well as everything else! 😁❤️

[@saulprokopavicius3628]

Mint. You guys did your magic again!!

[@pgmurray76]

I love the hatch, I love the gray color, I love the RPF-1's, and I love the engine (obviously). A lot of love for this car. I don't love the dancing though!

[@pmmartinpmjm]

Made by butthole clinch up.

[@pmmartinpmjm]

@@randolphhaber9190 not if you wanna keep that finger.

[@thisismossop]

Peltor's, I love those Brent. You should grab some race radios and use them. Get Jamie in a set! Keep up the good work brother!

[@seankaine2411]

I wish Brent comes too the east coast and see all the crazy high hp civics we have over here.

[@mk-jf1ux]

he hit epoing NH last fall.

[@seankaine2411]

@@mk-jf1ux I'm talking more like NYC tri state area. He should see how we lock down the highway and really race. Plus we have some of the fastest Hondas on the planet...💯💯

[@hondafreak8613]

Yea i missed him that day he was over. Only saw after in a video

[@busslayer4790]

Now that you are permitted and are going to stay there for awhile, maybe invest in some ventilation to suck the smoke and exhaust fumes out. Even if you don't mind breathing it, eventually everything in the shop will have greasy film on it.

[@austin1s]

I don't know who the random dude is with the UGA hoodie on, but GO DAWGS! Recently moved to NC and don't get to see much of that anymore, happy to see it in Colorado.

[@EBIKE-RIPPIN]

You guys do an awesome job and i would love dor tou to tune my car, ive worked at a honda dealership for over 12 years as a tech, keep up the good work

[@jaredthisdelle5617]

To the moon Brent to the moon I hear NASA is hiring

[@sponsored_hobbies8233]

Woah, that's some nice powa

[@crane63]

those last two pulls tho... holy freaking crap

[@ItsTheFry]

#PFIBOIZ Boosted compound is go boooiiiiiizzz

[@hondafreak8613]

Love those fenders

[@BTR2018]

Moon tunes only 1-800-moon tunes.... PFI. Y’all inspire me to make more videos:)) #moontune

[@spankthemonkey3437]

Built To Run I need to moon tune my all motor d16y7 lol

[@mattridebmx6717]

Was this filmed before the engine got pulled out the bully or is there something new in it

[@jayswisher575]

2 step sounding great!

[@jonsmith7426]

"730hp? Turn it down Brent" Brent: let's do 870!

[@thekodanator]

8:15 ha haaaaaa Brent plays with doooodiesssss

[@garylytlejr]

That coupler from the turbo to the IC. 😬🤯

[@mikehunt8375]

Wow that's a nice set up!!

[@chefdan87]

Have you considered adding an exhaust extraction system for the dyno? Sure would cut down on the excessive noise to keep neighbors happy. Also to help insure you're not pumping the exhaust gasses into the shop.

[@henryhammond882]

They have one belive it or not, its on the celing, theyve talked aboit it a bunch

[@chefdan87]

@@henryhammond882 is it one with hoses that come down to the cars exhaust or just an exhaust fan in the ceiling that pulls air from the building?

[@darrellroireau4061]

INSANE!!! I really enjoy your vids!!!

[@MRBiGL28]

BRENT from now on you have to keep that mic down when ever your tuning.. lol..keep up the great work guys.. all of you are awesome.. #keepthemicdown 10-4 you copy.. hammer down

[@gordowg1wg145]

ROFL at those 'explanations' about steering geometry... Two big factors to consider are front or rear mounted steering rack, and positive or negative scrub radius. The latter isn't really a concern as with wide wheels it will be positive, so it's just down to the rack position. Front rack, slight toe in and rear rack, slight toe out. You can even observe it toeing in slightly at 11:30 as it comes on boost. The 'tire wrap' is crap - you need to have the tyres tracking straight ahead - there is a limited amount of grip and if the tyres aren't tracking true they're putting a lateral load into the contact patch and so reducing the total available. That said, some vehicles have a significant amount of bump/roll steer, intended to induce understeer (because it is 'safer') it may affect the toe as the suspension rises. I would definitely trust you chaps with tuning and fabrication, but suspension geometry not so much - checked out the rear suspension travel and articulation yet on Sho'nuff?

[@braxtonmay391]

hell yea back to tuning race cars, Im stoked for that content too

[@reneeberty]

Damn guyz, I'm from france dreaming every day I could be where you at! I have built one unusual w124 2,3 CE! And let me tell you I wish I could be deported to have you squeeze some horse neeples off my engine! my car is a Myth Buster cause 30% from factory oem, 45% from Aliexpress, 10% from South AfricaECU and TCU, and the rest is custom build! 600HP so far and no issue in 4 years, I'm now going for the last stage 800 + Love you guys! Keep it up

[@SAVING_ICONIC_MACHINES]

Great job guys

[@Turboobsessed]

Up Up and Away! 🚀

[@ronniewilliz153]

Dam that thing needs some straps on that engine. Lol. So mich flex form all that dam power killer job yall

[@averymccall8393]

@PFISPEED thoughts on adjusting wastegate solenoid frequency to get better resolution in the boost control table.

[@NjoyMoney]

I feel that this guy is gonna look for a new transmission......after this one blows up :D

[@drewlangston7334]

Im still sad my buddy sold this car to Jake...it really had potential. Glad I got my hands on helping build it though.

[@KillaMTB]

What a hot rod 🔥🔥🔥

[@keyman1969b]

That's a nasty lil thing! SweeT!

[@eddominates]

2 step: Phong approved

[@mannys4539]

Damn we got a live one!!!!!!!!!!! You got to have some serious bowling balls to drive that puppy!!!

[@B16Afreak]

Wish to have a "Brand" in Germany! Awesome!

[@chadboy81]

Yep cleetus standing next to dyno is automatic 100 hp👍👍👍

[@xxdjsolomanxx]

That hatch is a savage.

[@DivaniKingston]

I like how at the last few seconds it looks like Brent turns to "Camera 2" and finishes his statement.

[@TheKtchevelle]

Love you guys

[@SupraHenry]

I’d love to see quick spoil valves with the little honda motors. They make Supra’s stand up quick

[@Miggylocz]

STOKED ON ALL THIS CONTENT!!!! #PFISPEED #BOOSTEDBOIZ #SHONUFF

[@Hectorszenshopedc]

Im in luv with Honda 😍... bro super street

[@claymillican25]

Love the videos!!!

[@peterwall737]

Love it all in the UK 😎

[@jayrodz3122]

That car is sick wid it that 2 step tho wow 🤗😎

[@hulkgqnissanpatrol6121]

What a sick tune. his mates sounded pretty amazed lol. On tunes like this do you overlap the valves? Meaning do they both stay open for a short time? And will doing that cook the valves?

[@Christdeliverme]

Just some kinks to work out, makes crazy power!. Wastegate priority, not much you can do as a tuner when you have an on or off switch (1% duty) to modulate boost. Get rid of the plumbing "P"trap on the oil return, usually only want something like that for a kitchen sink or somethin. Can anyone help me understand why this vehicle sounds the way that it does? Just the way the cam's degree'd or running bar stock for lifters?

[@bighomieJ5X]

I love K series turbo power , but u definitely can't go wrong with a nicely built turbo B series 😁😁

[@bigmikes2140]

You need a pave the lot donation/ entry fee bucket for spectators that come with the owners. 5$ you would pay for it this year

[@jeffrobertson7279]

The master has stuck again 👊 Kyle your up in the hatch! Give him sum!!!!!!

[@nikolamaodus302]

Crazy power

[@Indiecoresb]

Hey, are you guys going to go to Cleetus and Cars in Indiana April 18th? I really want to meet you guys! Youre going to all the cleetus and car events right??

[@leenux1707]

toe out is for corners with some camber.

[@finney67]

If the tie rods are behind the spindle then they will always try to toe out on power so there set to toe in

[@leenux1707]

@@finney67 naturally FWD toe in on power (some car more than other) and the toe out help with the camber. like a bike, if the wheel isn't flat it want to turn so the toe out counter that but I'm talking about a car that take corner, drag setting is different

[@deanwharepapa8561]

Awesome Beast Brent,

[@aaronlong7155]

much love boys from #NBcanada

[@mattminnich3886]

Loves as always.thank you

[@rodrigogomes8755]

Can someone tell me what front fenders are those? Congrats for the monster!!

[@_honeyconer._88crx79]

Super sick wit it😷💥

[@lengthluther484]

She doesn’t sound like she’s bangin on all the holes lol.

[@menogusta9829]

Sounds weird on idle and light throttle but once he gives it throttle it sounds great. Definitely does have this weird breakup/rolling 2 step sound to it

[@ShaneCarles]

Definitely intermittent lost of fire in one hole for sure. I can hear it too, but it comes in and out.

[@ShaneCarles]

Its okay under load, its when it comes out of load is when I hear it

[@menogusta9829]

@@ShaneCarles doesn't sound like a full on miss though?

[@br4d101]

To rich on the tune to begin with, hence why when Jamie said it was down a hole Brent then nailed it to clear the plugs and adjusted fuel!

[@ChhhhNotEven]

Not one, but two Grim Reapers patiently waiting. 💀💀 15:10

[@pgmurray76]

That dark ass tint definitely makes them look that way

[@purebredracing5291]

BRENT/JAMIE BILLY LOVES YALL. HOPE ALL IS WELL!!! KEEP SENDING!!!

[@Tampaboys]

Great as always guy's super clean hatch. let her ripp tater chip. Thanks so much guys.

[@Hamsteren91]

Is all the smoke at the end of the pull a turbo scavenge issue or, are you dumping fuel in chamber for cooling? If it makes sense?

[@peterwall737]

Is frong working on the rat rod...😎

[@n01z3]

sounds like its not 100% happy but the HP says otherwise. lets hope they bring it back. needs some love and it a ripper

[@Boogerboys1990]

Yeah let's go back to the Moon shut the debate up 🤣🤣🤣 😂

[@Hectorszenshopedc]

howl with me at the moon, the moon tune... !!! 😁🤪

[@BucketList22]

“I picked the wrong week to stop sniffing glue!”

[@trinkladd]

Guy in red hoody at 16:25 he's military or law enforcement. Maybe both. Gaurantee!!

[@staudtc91]

So i guess what im wondering, probably a stupid question but i dont own a dyno nor have i been to one, why not spray the contact point i.e the rollers on the dyno instead of the tire?

[@Trucker86NL]

Awesome build! The thing runs like a boobie! Why did they move the Cleetus cardboard over near the screen when the pull did not came through?

[@rigobertoacosta3534]

Lol the headphones are awesome !!!!!!!!

[@belcebu5907]

Daaaaaaaamn now that intresting machine

[@robertsmith3132]

Breaker breaker ready for the launch

[@michaelmcginnis9029]

Are you near an army post. See a lot of soldiers like active army guys still young and wild lol. Miss my army days. Lol. Hooooah

[@ShaneCarles]

Looks like the valve stem seals are toast!