Serpentine Belt Renewal (With Manual Belt Tensioner)

Renewing the serpentine (auxiliary) belt on a 2001 to 2008 Peugeot 307 with the 1.4 litre petrol engine. This engine has a manually adjusted belt tensioner. Peugeot specify the use of a special electronic tool to correctly tension the auxiliary belt (SEEM C. TRONIC type 105.5 belt tensioner tool). If you don’t have access to this equipment, you should tension the belt to where there is about 5mm of free belt movement between the crankshaft and A/C pulleys when firmly pushed with your thumb or finger. If this method is used, the tension should be checked using the specialised equipment as soon as possible. Thanks for watching, please comment, like and subscribe !.
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2020
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

[@koudtubh]

only detailed video of seperentine belt on KZbin. thanks

[@screwsnutsandbolts]

You're welcome :)

[@perinaja5564]

thank ,i could not finde video for long time with manual tensioner

[@screwsnutsandbolts]

You're welcome :)

[@editoesponga9928]

Nice..idea for sharing technique..

[@EdyAutoservice]

Engine oil leak ...thank for sharing to replace fan belt... Salam mekanik dr indonesia

[@screwsnutsandbolts]

Thanks

[@georgemarcos8688]

Good and important video 👍

[@screwsnutsandbolts]

Thanks !

[@Passengervehicles]

Good video !

[@screwsnutsandbolts]

Thanks!

[@iyaramonk]

Where is the lower alternator bolt? Is it hidden behind the idler pulley?

[@screwsnutsandbolts]

Yeah I think you're right.

[@iyaramonk]

@@screwsnutsandbolts Yep it was. Had to break out the big torx to get it off :)

[@user-kc7nf5gs1p]

Do for me of 1'8 exara picasso fen belt again

[@nadim2769]

Is that your personal car? You seem to be doing quite a few videos on the Peugeot

[@screwsnutsandbolts]

Yes this is my own car :)

[@zeez9053]

👌🇬🇧

[@screwsnutsandbolts]

Thanks ! :)

[@editoesponga9928]

Nice..idea for sharing technique..

[@screwsnutsandbolts]

Thank you! Cheers!

[@user-kc7nf5gs1p]

Do for me of 1'8 exara picasso fen belt again