Servo Travel Tuner - Easily Control How Far Your Servo Rotates!

[@smaindjaouahdou8696]

the travel tuner was the perfect solution to an issue i was having ! it's simple and works perfect..thank you so much !!

[@goBILDA]

Super glad it works for you!

[@arlobailey2399]

Best video I have ever watched thank you so much!!

[@birdistheword1327]

Just ordered mine, my throttle servo is opening the slide to the carb way to far and over extending, I hope this will be the solve

[@ramaputro5224]

hey goBILDA nice to see ur video👍, please help me to choose which component i should buy if i have some project🥺. I want to make servo move due to DC voltage input, DC input from 0.4V-4.5V (i want servo movement depends on input voltage, maybe like throttle gas). And i want make it adjustable by screw like this video for servo movement. I don't want to use Arduino, bcz i just need 1 input and 1 servo and make it simple hehe. Help me please, thank you so much 😁

[@EDP1]

what would be the range with a hitec HS-805BB servo ? normal its from 1 to 180 range . and does it work on 6 volts ?does it need to stay connected after adjustment ?

[@Studio_Cricket]

I think I received a product return because all the screw heads to adjust the pots were almost completely stripped. The plastic appears to be very very soft. I never was able to make the adjustment to increase the travel work on my servos at all.

[@goBILDA]

That's very strange! Can you please reach out to our customer support with photos and information about your use case? [e-mail]

[@jimhaayy5363]

So looking to update my kicker motor throttle and steering on my fishing boat from a linear actuator to a servo. Both actuators are hooked up to a 4 way switch controlled by a wireless remote. 2 channels work the throttle and 2 work the steering. On the throttle end I have a speed controller so I can better fine tune the trolling speed. The 12" actuator I am using for steering is way to slow. Can you tell me what I would need to get in order to swap over to actuators? Steering I need it to move quickly and has about 12 inches of side to side movement for full turns. Throttle has 2 inches of travel. Everything is running on 12v.

[@jimmyfinke6759]

how can you make a flipper using servo motors controlled with your transmitter and receiver? thank you! jimmy

[@valentinosantaniello2193]

Hello! This " Servo Travel Tuner " work with arduino Uno?

[@TW39]

Is there a travel tuner to hook up multiple servos to the 1 travel tuner instead off for one RC servo

[@goBILDA]

We don't have a multi-travel-tuner at this time, but appreciate the suggestion.

[@GIJha]

Does this work with all servo brands?

[@goBILDA]

Yep! Any standard RC/PWM Hobby servo.

[@smaindjaouahdou8696]

if we use a Y servo connector , can we control them both with one single Tuner?

[@goBILDA]

Yes, both servos will receive the exact same signals!

[@smaindjaouahdou8696]

Awsome! Your products are amazing, buying more stuff soon

[@matiasmaisonnave8092]

Hi! Where can I buy the Servo Travel Tuner?

[@goBILDA]

www.gobilda.com/servo-travel-tuner/