ServoCity SPT200 Pan & Tilt System

This direct drive pan & tilt system is perfect for cameras or sensors up to 2 pounds. The SPT200 incorporates 1/4" shafts supported by dual ball bearings and rigid 1/4" ABS plastic. Three 1/4" holes in the top plate make it extremely easy to mount a camera or sensor. This plate can also be easily drilled to accept other attachments. If your project requires more that 90 degrees of movement, you can order servos pre-modified from ServoCity.com. The ball bearing pan plate has six holes for easy mounting to various surfaces.
The pan servo is mounted to the ball bearing plate and spaced off with (4) threaded posts.
Our ServoCity aluminum clamping hub is incorporated into the bottom for easy removal and optional attachment to other items.
The unit comes unassembled with full instructions. Servos are not included and must be purchased seperately.
For more information visit www.ServoCity.com.

[@ServoCity]

Hi Joshua - no problem! I believe in this video Hitec HS-485HB servos are being used. However, you can use any standard size Hitec or Futaba servo. The only difference between the two brands is that standard Hitec servos have a 24 tooth servo spline, and standard Futaba servos have a 25 tooth spline. Other than that, it is just personal brand preference. Hope this helps!

[@ServoCity]

First of all you’ll need the servos. The HS-485HB or HS-645MG servos work very well. Depending on your application, look at the 902MSD or the JS-200 for a controller. The last thing you’ll need is a 4.8V or 6.0V battery pack. All of the items mentioned are available at ServoCity. Give us a call if you have questions about any of these parts. Thanks!

[@ServoCity]

Yes! If you go to our website and search "DDT500 Tilt" you will find it. There is also a video of it in use on KZbin as well. Just search "DDT500 Tilt" and it should be the top video. The tilt kit is $24.99 (without servos). Thanks!

[@ServoCity]

@BradKereliuk In order to operate a pan and tilt mounted on your R/C car, you will need to have two open channels on your transmitter and receiver that you can designate to the pan and tilt system.

[@brushless55]

I love you! I need one of these, thank you so much!!

[@ServoCity]

Hi Zeljko - this unit is only rated for cameras or sensors up to 2 pounds. If you are needing something that will handle more weight (4-6 pounds) you might look at our PT785-S pan and tilt system. Thanks!

[@Dudeiculas]

I ordered one of these last week hope to receive it soon

[@joshuaortega7360]

Thank you for the response!

[@ServoCity]

@hulllewis0817 - No, this system does not come with a controller. We do however have various controllers that are compatible with this kit on our website (ServoCity). If you have additional questions feel free to call 620-221-0123 and speak with a technician. Thanks!

[@ServoCity]

@overdrivek The SPT200 pan and tilt uses standard servos, therefore you can use almost any type of servo controller to control it. For more information, please call our tech department at 620-221-0123. Thanks!

[@kulderij]

Is it possible to get this only with the tilt-part, not the pan part?

[@joshuaortega7360]

Is this video using the Futaba or Hitec servos? And what are differences between the two? (I apologize if my questions come off very basic, I'm very new to this field)

[@leochanvideo]

thanks reply! I want to know how can I change the speed of pan tilt motion? how many steps of speed can be changed?

[@MegaLeonidovich]

Its going crazt

[@BradKereliuk]

how would I use this with my wireless rc car? would I have to install some switches on the reciever?

[@EricWilliamsNeu]

@ServoCity Is there really nothing in between the SPT200 and the PT785-S? That's a pretty huge price gap.

[@ServoCity]

Hi Eric, as far as an actual kit, we do not, but you might check out this gearbox pan and tilt Actobotics / ServoCity SPG5485A-CM pan and tilt (antenna tracking). If you have questions let us know [e-mail]. Thanks!

[@GiorgioGiorgi]

can this make time lapse with a reflex?

[@leochanvideo]

I'm new to setup camera crane. I want this to control my GH3, the price and weight support is good to me. Which controller , battery supply or other parts shall I buy from servocity?

[@ServoCity]

Hi Giorgio, we wouldn’t recommend a servo drive system for timelapse use. Since servos have a finite number of points, when you slow the movement down you’ll notice the steps in the footage. Please feel free to contact us should you have any additional questions. [e-mail]

[@zaintlouis]

Is there anything for dslr cameras? or handycams?

[@ServoCity]

You can check out all of our pan and tilts here: www.servocity.com/html/pan_tilt_roll___accessories.html If you have any questions email [e-mail]. Thanks!

[@ZeljkoSoletic360]

do you have something up to 4 pounds?

[@ServoCity]

@eimaistoyoutub The SPT200 should not be used for a 2kg camera. If you contact our Tech department at 620-221-0123 they can suggest a pan and tilt system that will best-fit your needs.

[@olegkasper1]

Полная хрень. Система сидит на серве без редуктора. Вращается только до определенных углов, вообщем это так фигня