Brother CS 6000i 11 Stitch Width, Length & Needle Position

[@mikejessie2155]

Wow thanks so much of all the tutorials online I've seen yours have been the easiest to understand and the most thorough for a complete understanding.. much appreciated!

[@LilyLou123]

Thank you, just got this same sewing machine from a garage sale and did not know how to use it. Perfect instructions

[@CollapsedMass]

That shit was dope. my sewing skills are going bonkers thanks to all the tutorials from the elders. Thanks.

[@emilyneumann3329]

I just bought the brother CS6000i and your tutorials are great! I was moving through the manual so slowly, and then your videos made everything so much easier.

[@shizasworld.9736]

Price plz

[@lesliesomerville4833]

Yippy! This is the best tutorial I have ever seen. I don't know what I would have done by just reading the directions that came with the sewing maching. As an instructor you are amazing and make what seemed hard for me extremely easy. Thank you very much.

[@Brilliance728]

Thank you guys so much for this video series!! I'm a designer in school and this videos were exactly what I needed for my semester project.

[@Sewingmastery]

Thank you so much for watching our videos on the Brother sewing machine. If these videos were helpful, please Support this Channel by clicking on the right side of our home page and making a small donation. kzbin.info/door/i409EnsFG1RwSbulmx65eA Thanks! ~Sara~

[@bevgarvey8477]

I bought this machine about 5 years ago but never knew how to navigate. thank you for the detailed instruction on all the features and how to use the needle threader instruction is perfect. Bravo!!

[@cleric022684]

did you try reading the manual?

[@dorcasbyrd9384]

Thank-You for this tutorial! I will be getting my machine in the next few weeks and I wanted to get a headstart.

[@speeeee35]

Great explanation, thanks very much for taking the time to post this video! Big help 😊 Hope you and yours are feeling ok and staying safe at this time 😷❤️

[@jilljohnson7670]

Never knew the default setting is supposed to be 00. I have the Brother CS7000X and it defaults to 01. That explains why my markings on the throat plate weren’t accurate. 🤪 Now, I that can get accurate measurements, I will also use the seam guide inserted (explained in another video) to keep my fabric going straighter as I have a tendency to wander a bit. Thanks for these videos!

[@homeschoolingmom8204]

This is exactly what I needed to figure out the buttons. Thanks!

[@Msteal]

Bravo! This video just explained exactly what I needed to know about the buttons and stiches! Thank you so much!

[@TheLynnsepeda]

Thank you for making and sharing these videos. You're a really good teacher!

[@yarnsrj]

LOL, couldn't figure out how to change the needle position until i saw yout tutorial. Thank you!

[@GelaIssy]

Thanks so very much for this wonderful tutorial that has saved the day.

[@marinasoto5015]

This is a great video. Great tutorial. You explain things so good.

[@edenandkoi]

This video was extremely helpful. Thank you!

[@nataliearena2241]

Great teaching 💛

[@mryup6100]

Lots of useful tips, thanks!

[@kovidllc5660]

Hello there , demonstration video is awesome. Thank you so much for your help.I have followed all the steps and am able to set the machine for working still the motor and needle is not moving for sewing will you please help

[@HeirloomCreations]

Please contact a local sewing machine service center in your town if the machine is not running/moving.

[@reportcred]

whats the size of the needle that comes already installed in the machine and how to determine the size of the needles thanks for the tutorial!

[@AirQuotes848]

Thanks 😊I will be asking questions.

[@danielgraytube]

Thank you so much. Very quick and informative. I appreciate your time.

[@michellerhodes4836]

I just bought this machine second hand and the previous owner didn't use the needle down position whenever the machine stops. I looked in the manual and it said to hold down the "-" button on the left stitch selector button while turning the machine on then letting go once the machine turns on. I have tried this but get an error message and beeping until I turn the machine off again. Can anyone help? I'm so used to stopping in the needle down position when sewing that this is driving me nuts!

[@mikecowley2]

I use the CE1125 machine, and until your video could not find any information - including the manual - on how to position the needle to the right for 1/4" quilting. Yea!

[@MadeByTriniLena]

Thanks I'm trying to use Mara 30 polyester thread but it's not passing threw the needle eye, any suggestions?

[@barbaradanko9603]

Hello How do you keep the posion of the needle to stay in that posion ?every time i put the machine on it goes right to the left ?

[@valeriaguelo257]

BEST VIDEO EVER!!

[@hatifrancisco4195]

do you have video on cs 7000i?

[@markfalina9160]

This video shows adjustment of machine speed and the result of it. However, it never mentions the machine speed. What is it?

[@sophielmd1615]

Thanks a lot. This is so helpful

[@sabrinanelson5001]

So helpful thank you

[@margaritarivera9672]

Thank you ! So much information.

[@gracemartinez4149]

How do you re-align the needle for this model.

[@videoman4424]

I’m using the walking foot that came with my brothers CS-6000i . Can you tell me how to get a 1/4 inch seam with this foot? It’s my first time to make a quilt and I don’t can’t get a 1/4 inch seam.

[@lafredaacree17]

Look on eBay, you can find it there...

[@louellagreen8365]

Do you have one whose voice is an alto rather than a metzo soprano.

[@barbaradanko9603]

The number is very dark to see is there a lighter one?

[@beatrizamaro1838]

How to go back to regular stitch I mess it up

[@zozo1048]

Good evening,lbouht a sewing machine, but unfortunately the dcree does not work

[@bevgarvey8477]

Good video

[@ifeomaadaka1255]

Hello please I have a problem with my machine it sees inward

[@muzhdasharifi9990]

Thanks for sharing this.

[@zaidaquieroverquieroverman7211]

Muy interesante el Tutorial. Por favor en ESPAÑOL.Gracias.Respuesta, por favor .

[@marietara5880]

My machine is mz53 are to use it.

[@eaasle]

is there a way to silence the beeping sound every time you push a button? that would annoy the heck out of me.

[@kristyrice3441]

Thank you

[@zoraidagarrido778]

Bueno es el rxcelente

[@brat46]

Please slow down, it sounds like they sped up the video. I just got this machine a couple of months ago and absolutely hate it.

[@bobeneellis362]

Can you say why?

[@brat46]

@@bobeneellis362 I am use to the older machines (70's and earlier), this machine will bog down if you are sewing several layers together (think of the pleating on mask currently being made. ). It will automatically default the needle to start on the left hand side, where as earlier machine start in the middle. So if you are in the middle of sewing something and have to stop then start and forget to check where the needle is at you end up with two different seam lines. Seam ripper time. It has plastic parts inside and seems to vibrate more than my mostly metal sewing machines as it is much lighter in weight. I purchased this mach more to take to quilting classes and such as it is getting harder to find parts for my older machines. This machine is what I call a throw away. Cheaper to buy new than fix.

[@nataliaromanova9556]

@@brat46 So basically you just don't like change. I've had this machine for about 7 years now. never taken it to be serviced. I've had some glitches now and again, but nothing major. Over all it's a relatively simple machine. A lot of stitches I will never need, but that's ok too. I have my gripes with it, but I accept the machine for what it is. And honestly, while I have a HD machine, it's pretty rare I ever switch over to it. This one will sew most things just fine as long as you use the right needle and understand your fabric.

[@brat46]

@@nataliaromanova9556 I don't like the fact that basically the new machines are 90% plastic. I consider this machine a throw away. I use it in classes or on retreats so that if it breaks it is no loss to toss it in the trash can.

[@nataliaromanova9556]

@@brat46 Plenty of metal machines out there. All your complaints for the most part were complaints about it being different than your old machine. Mine has been going for several years, so your complaint about it being a throw away seems rather silly.

[@lisbethmarie8329]

Haha she said butthole

[@Snakemountainvtg]

.22 🤣

[@panchanansendha4544]

Hindi

[@donnac7839]

Nervous voice is hard to listen