This is a GIANT ANIME KATANA!!

Its a Real Giant Katana!! a review of the cloud hammer steel works nodachi.
Be sure to check out Cloud Hammer steel works:
cloudhammerforge.com/products...
If you like the content and want to support the channel, you're welcome to support us through playeUr, Subscribe Star, become a channel member here on KZbin or through Pateon:
PlayeUr: utreon.com/c/shadiversity
Subscribe star: www.subscribestar.com/shadive...
Become a member: / @shadiversity
Patreon: / shadbrooks
NEW Shadow of the Conqueror T-Shirt:
shadiversity.creator-spring.c...
Come check out my other channels!
THE SHADLANDS: / @theshadlands1142
KNIGHTS WATCH: / knightswatch
Subscribe to my website so you don't miss an upload: www.shadmbrooks.com/
Follow me on Facebook: / shadiversity
Follow me on twitter: / shadmbrooks
My novel, Shadow of the Conqueror Audio Book affiliate links:
US: www.audible.com/shadbrooks
UK: www.audible.co.uk/shadbrooks
CA: www.audible.ca/shadbrooks
AU: www.audible.com.au/shadbrooks
Ebook, Paperback and Hardcover available from most major book retailers, here are a few of the main ones:
Amazon affiliate link (be sure to navigate to your country's amazon site):
amzn.to/2XErUaR
Barnes and Noble:
www.barnesandnoble.com/w/shad...
Kobo:
www.kobo.com/au/en/ebook/shad...
Awesome Shirts and chainmail print clothing: teespring.com/en-GB/stores/sh...
Visit Calimacil for the best replica foam swords and LARP weapons: calimacil.com?aff=38
Buy my sword IMPERIOUS from Calimacil: calimacil.com/products/imperi...
Community run discord server: / discord
#castle #castles #chepstow #sword #swords #knight #longsword #medieval

[@MerrilSmith]

The real question is this, how much better will the Nodachi be if you give it a long sword hilt?

[@Minty7602]

OdaGreat (odachi great sword)

[@Sasukex1337]

Still not as good at cutting due to the curved profile

[@blacksnapper7684]

Pretty sure it would throw the balance off

[@anthonyjr9722]

Sounds like fun

[@macarraodeshanghai]

So... like the Mihawk's sword?

[@jamesyamamoto5155]

One thing you have to keep in mind is that the nodachi was used against mounted opponents. As such the balance and geometry changes to match the different purpose.

[@Undomaranel]

"Do samurai on their horses keep cutting you down? Spears chopped, blades just can't reach? Introducing the nodaichi! A sword long enough to make them regret being stuck on a horse (that YOU will be killing soon!), with too many weapons and not enough armor to take the hit!" Or "All out of fell beasts? The Witch King just needed a nodaichi and Théoden would have been his the first time!"

[@MaaZeus]

Yup. It is not really made for 1-on-1 melee combat although it can be quite fearsome in that too under skilled hands. It is used to cleave passing cavalry units, chop the legs of running horses and so on.

[@MaaZeus]

I have to add, apparently straight bladed nodachis also existed. One of the dudes who Musashi dueled was said to fight with one. We do not know if the sword was ruler straight like a hollywood Ninjato but it was straight enough that it warranted a mention and even got a nickname referencing that, pole something. I guess that geometry made it more manageable at dueling, more similar to western great swords. 🤔

[@Ranstone]

Not relevant. The differences are a _consequence_ of greater reach, not engineering specific to fighting mounted opponents.

[@milamber319]

That means doing large horizontal slashes which would be better done with a claymore that doesn't rotate. The context of why they exist doesn't make them the best for that job. The large cross guard and the ability to grab a claymore above the crossguard means you can engage mounted enemies in more different ways. The extra mass makes lopping off a leg easier and you can more easily defend yourself or go for the rider or use it more like a spear. Nothing beats a wall of pikemen for anti cavalry but if I had to face a mounted enemy with a sword I'd choose a claymore over anything else.

[@Gonzora]

Seeing the notification for this video immediately made me think "Sephiroth enters the chat".

[@TsarBomba69420]

Shadiroth

[@kagemushashien8394]

Safriroth

[@HolyCow0273]

I think he did a video on his sword and said that it was pretty good.

[@Undomaranel]

​@@TsarBomba69420 If Shad's Sephy, then who's the rest of the crew? X'D

[@TsarBomba69420]

@@Undomaranel It's like Smash Bros instead of the original series. IDK who the others are though.

[@DigitallyTwistedOutlaws1178]

Sephiroth wants his display sword back.

[@TheSteam02]

I believe, iirc, nodachi weren't all that popular with samurai at the time. They were apparently unwieldy to the users and they really liked having extra handle like on a naginata or yari. Thus, the handles were made longer and longer until they eventually created the Nagamaki, a sword/polearm that was half handle and half blade.

[@phileas007]

Probably mostly a price issue

[@Immopimmo]

​@@phileas007 A two handed sword is a waste of steel if you're only using half of it. Might as well make half of it handle. That gives you more ways to grip it too.

[@TONEDEAFSOUND]

nagamaki is the most underrated weapon ever i fuxking love mine

[@eagle162]

They were actually popular there are schools today that are known for their nodachi, this sword here is not accurate to a real one, that is not the reason for the nagamaki, nodachi even influence designs in other countries such as wodao(now name miao dao),stop listening to Shad already.

[@blankistblankophobe9078]

I've always read that the nodachi was a specialty weapon in samurai warfare, much like the greatsword or war sword was in Europe, mainly used to defend gates, break spear formations, or cut the legs from under charging cavalry horses.

[@senounatsuru6453]

The Nodachi is an interesting one. It seems to be far less forgiving than a straight longsword or even another katana. That curve and weight really does screw with things.

[@synthemagician4686]

The thing that's really screwing with it is the tiny handle. Look up other examples of a nodachi and you can see they have a way longer handle so you can actually have control over the blade.

[@KairuHakubi]

@@synthemagician4686 I think people get thrown off by historical ones that are reduced to just the tang, thinking that's the handle length. Though... I was also told that they were historically made just to show off, with the non-serious idea being that you'd wield one against a horse.

[@Y33haw355]

​@@synthemagician4686 The nodachi I've used have had a handle somewhere in the 40-45cm range, and the extra length does help with leverage. Trying to use one with a katana-length grip sounds less than ideal.

[@antoinel122-5]

​@@KairuHakubipour sûr ! C'était probablement des lâmes avant tout destinées à montrer la richesse et le pouvoir d'un seigneur au combat. N'importe quel type de vouge ferait mieux le travail anti-cavalerie.

[@trolltalwar]

@@KairuHakubi pretty sure the nodachi was made to be wielded while ON a horse. standard katana are too short to hit somebody thats on foot while youre on horseback

[@oaksparoakspar3144]

Finding a quality Nodachi is amazingly hard. They are rare to find on market, period, and then to find one with quality is even rarer. I've been looking off and on for at least a decade and not found anything to settle on. That said, $1K is a bit high for what is just a carbon blade in cheap features. $550-$650 is the fair price point if it is going to be a scaled up version of a $250-350 functional katana. Rarity and, I assume, the lower volume could justify another $100 if they are likely to sit on inventory for long periods of time. Would love a good horse cutter, though, so I'll keep on looking. Thanks for the review!

[@Stupididiot-ci5gf]

I've been looking for a little bit, too, and I'm mostly just worried about this thing snapping in half and killing someone. I've seen some with great reviews but some are juuust sketchy enough to sow doubt in my mind and I hold off. PLEASE let me know if you get a lead.

[@samuraijackson241]

Seeing the phrase "horse cutter" reminded me of a Chinese sword that, when translate from Chinese to English, literally mean horse slicer, as it is designed specifically in countering horse- riding troops.

[@spencerthestupidsamurai7326]

Honestly might be better off forging your own nodachi out of spring steel or T10.

[@oaksparoakspar3144]

@@samuraijackson241 The Zhanmadao or Zhanmajian (depending on if it is single edged like a No-dachi or double edged). Pretty much the same thing and with a similar purpose - adding reach due to cavalry and infantry being too far apart for normal sword lengths.

[@superrobotmonkeyhyperteamf3194]

I recommend doing a lot of research and then telling them what you exactly want. Especially researching the measurements of original unshortened blades (not the ridiculous large blades used as shrine offerings) be clear about it and use the correct terms and you will often get really good working swords for surprisingly small amount of money. Also recommend very standard tachi fittings since the fancy ones aren't worth it imo. Use modern steel. They would have done the same if they had access to it anyways. Also they probably weren't used to cut horse i cant remember any source. Rather against infantry and as bodyguards.

[@dragoknight589]

Nodachi when Yesdachi walks in:

[@haydenwillmott4687]

Shad: *gets a Nodachi* Also Shad: *grows longer hair, gets taller, and has a Black Angel wing (singular) sprouting from his back. As well as gaining magical powers*

[@SubliminalEncryption]

Shadiroth!

[@michaelrussell3890]

Don't forget the black trenchcoat

[@xxXXRAPXXxx]

Just remember to keep your Aerraerasthisess away from him.

[@MYTHNL90]

Why do I hear boss music?

[@samuraijackson241]

That nodachi is no where close to the length of the mesamune, which shad did make a video about it.

[@petersmythe6462]

"1.64 kg" That is kind of astonishingly light for a two-handed greatsword.

[@johnedgar7956]

Thank you Shad, that is quite a sword! Weren't those huge Nodachi swords originally intended for cavalry or Samurai horsemen? I feel like it would be useful for someone fighting from horseback. You have all the coolest toys! 🙂

[@theZDOME]

They were used for foot soldiers to cut down horseback foes

[@kennethsatria6607]

​@@theZDOMELIKE GUTS FROM BERSERK!?

[@theZDOME]

@@kennethsatria6607 you can’t mention berserk without me having to binge it again, it’s just too good! Howst dare thy

[@skrrrtsusman3450]

@@theZDOME they were also used on horseback, although rarely because spears were just better for both.

[@TheOtherMwalimu]

Wow, Shad & Company filmed a lot of videos before Shad's travels to England! I'm impressed.

[@TemperedMedia]

They definitely put in the work, and you can see how it strengthened their friendships to work a lot together. Manly men stuff.

[@XxSoraMifunexX]

I personally train with Nodaichi and they are quite amazing as a fencing sword.

[@jacobweatherford4696]

I bet they require abit more technique to use than katanas due to their length and slightly heavier weight.

[@catsponge_079]

Also being TEN TIMES LONGER may or may not be helpful 😂

[@Undomaranel]

_poke poke poke slash Aerith'd_

[@XxSoraMifunexX]

@@jacobweatherford4696 Actually, I just hold it in a relaxed Side Guard and work defensively. Watch the opponents movements and force them to step into your massive swing arc or step forward into an upswing and take the opponent by surprise. Usually, I just step back and counter with a downward strike, followed with a thrust, if the option is available. It's a more responsive style than an aggressive one.

[@jacobweatherford4696]

@@XxSoraMifunexX that sounds similar to one of the zweihander fighting styles

[@chrisfields8077]

I'll also add, for the blade length of the nodachi, the handle length looks a bit off, too short compared to historical ones I've seen.

[@jort93z]

There is a LOT or variation. Some nodachi were literally twice the length of his sword. Some of them have handles over 1/3 of the length of the blades, others only 1/4 of the length of the blade. Sometimes they would cut a piece off the tang to shorten the thing. I'd say it is less than typical for a nodachi, but not so small that it would be "wrong", in my opinion. Not that it seems to be trying to be particularly traditional anyway.

[@liasonlee1248]

yep, from what I know, Nodachi are low quality warblades that are normally longer than the length of a man's height. (so that it won't hurt to destroy part of it to make it usable at close quarters)

[@hvymax]

I made a Nodachi back in the 70's using a Claymore ingot. 37"x2.5"x.25" spine spring tempered. I've recently broken it down to fuller it and make a pommeled two handed Rapierish guard. Talk about an actual Bastard Sword!!! My blade weighs twice that. I will probably sleeve the grip and fill the last few inches with lead.

[@SectvsDraco]

You guys tested a double bladed sword, but what about the concept of double bladed naginata? I think that would be an interesting idea

[@KeelHeel]

sounds like a yari edit: oh wait u meant- oh- oh my

[@SectvsDraco]

@@KeelHeel Yeah i don't know if "dual bladed" would describe it better

[@tinyj4520]

They were a thing. Mostly for duels, traveling, and home defense.

[@jort93z]

1 pin is not an issue IF the handle is fitted well to the tang. If the handle is fitted well, it won't even easily come out without the pin. Putting 2 pins in is a rather new trend. Most historic blades only had one pin and the samurai were fine with going to war with em. Sometimes they would take old blades with just one hole and put a second hole in the tang to add a second pin. It's probably more traditional to have just one pin. 2 pins doesn't hurt, but it is not necessary. Unless you have a mass produced sword where the handle is not fitted to the blade, in that case you probably need 2. Also, it's custom made isn't it? They'd probably add a second pin for no extra cost if you want two.

[@mrkiky]

I think the sword they went to war with had 2 pins though. Most tachis had 2 pins while most katanas had 1 pin and katanas were mostly worn around in the Edo period, not taken to war. But yes, the whole idea behind the Japanese style hilt construction is that the handle is perfectly fitted to the tang and contacts the tang all around on all surfaces as evenly as possible, so the pin really just keeps it from sliding off. If your handle is not fitted properly, it will put pressure on the pin instead and that wooden pin has no chance with that kind of shock.

[@atomicdestroyer8068]

I recommend Hanbon forge for a comparison, they have a nodachi which is significantly cheaper and has a longer handle. The one that you have looks like a regular katana handle which is weird

[@TONEDEAFSOUND]

i own that sword it’s wonderful it is a bit shorter with a blade length or 36”

[@drifter-donosadventureobsc9565]

Well that was neat. I actually got a custom odachi as well just recently. It was pretty cool watching the look on tyrinth's face when he realized what I did. The length on that blade makes the curve SO much more pronounced, and it just begs the blade to fall to either side, almost fighting against your alightnment.

[@lordwarryl5712]

"I actually handled something bigger than this, multiple times...." -Shad 2023

[@ilajoie3]

27:41 Good to see Nate wasn't left out of the fun

[@brandonlowe3299]

I got a semi custom odachi from swords of northshire for around 700 a few years back. It's held up very well, so I'd definitely say 900 is on the higher end of usable odachis on the market. They typically range from 500 to 1300 for something that isn't a wall hanger from what I've seen

[@fransthefox9682]

This is the second most historically accurate Nodachi that I've seen.

[@Jaedeok82]

Cloudhammer's steel types are typically a little more specialized than just some straight 1095 or whatever you'd get at most vendors. Their Sx105v in particular is fantastic durability/edge retention/scratch resistance. They typically offer them in 39" Nagasa, and 49" nagasa, which are also a little longer than the 34" nagasa that's much more popular to offer.

[@RauMins]

Seeing you guys so happy about this also makes me real happy, glad you got to play around with that! It looks gorgeous and the blade seemed to hold up pretty well, though yeah the handle and brassy bits seemed cheap, I do wonder if it would feel any better with a crossguard and pommel. Also I now need to watch that claymore video ♥ Thank you so much Shad and Tyranth, also I see that sneaky lil Nate in the background, sneaking around being a lil sneak!

[@zornmediagroup43]

So, I spent around 500$ on a 52' nodachi recently (1095 folded steel) nodachi. I had them take the blood grooves off on it. It's made really nice, no complaints thing cuts like a beast. Not sure how you spend twice that much and get less.

[@SeanCrosser]

Having a fuller probably helps with the weight distribution of the blade.

[@zornmediagroup43]

@@SeanCrosser This channel is really cringe sometimes. Expert acting like he doesn't know what and how he should be comparing things.

[@mrkiky]

How do you get the fullers out though? You mean not have them in the first place?

[@budthecyborg4575]

This is the "That's Not A Knife" for swords.

[@malakai71]

the issue u guy are having is that the nodachi isnt a "cleaving" sword, its built more for a carving motion. so when u swing it u cant swing it like a english sword. u gotta do almost a drawing back motion if that makes sense, think less cut and more slice if u will

[@VidelxSpopovich]

Anyone else notice how much more comfortably Tyranth holds the nodachi or whatever it’s called as compared to Shad at the start of the video? He takes and grips it with such confidence, holding it firmly and not really adjusting his grip much. What a showman.

[@DavidSmith-vr1nb]

Shad has chronic fatigue, Tyranth is taller and a bit younger iirc. Apples to oranges etc.

[@VidelxSpopovich]

@@DavidSmith-vr1nb I don’t think the chronic fatigue is really applicable here considering they were just, at this point, holding the sword. Besides, I by no means intended that to be a slight against Shad. Even without the fatigue I think we would still see this difference in their individual presentation. This is because Shad is clearly more laid back I think while Tyranth seems to take a lot of pride in every aspect of what he does, not that Shad doesn’t of course. In the end it’s their presentation that’s different.

[@marcogenovesi8570]

Tyranth is a proper weaboo. While Shad was making videos, Tyranth was studying the blade

[@shadowwolf2608]

There is an online seller of swords called Samurai Swords, they have nodachis/odachis as well and the highest priced ones are $640 pre-tax and shipping. They also have custom swords including custom nodachis, and I think that it would be interesting to see what you guys would come up with using the custom sword option and a certain budget and then put it to the test. Budget permitting of course, but I just thought that I'd throw this information out there.

[@gazza8234]

Yep, I had them custom make me a more biggus nodachi just over a year ago. Thing is a beast, scares the crap out of me 🙂

[@shadowwolf2608]

@@gazza8234 A shame that you cannot get a tsurugi (japanese double edged sword) anywhere. Now that would be a very interesting comparison to a European long sword or arming sword.

[@b3rz3rk3r9]

If Ibremember correctly, these katanas were used by lords on horseback and had to be carried by a squire or bearer on the field because it's too long to pull from the sheath by yourself. I've always thought of wny not use some gears and springs to create a trigger-opened sheath for the Nodachi. Like, I get how *_SUPER EDGY_* the idea sounds, but I'm thinking a case that pops the top half open with a trigger press on the guard and closes when the blade's spine is pressed back into the sheath. And have the lower half be completely sealed, since the problem is that pulling out all the way is gonna mess with your shoulder. Allow the upper half spring open with the lower half being intact, almost similar to a sideways-sliding music box with a split top.

[@kagemushashien8394]

Or make the sheath open sideways and not upwards.

[@t2av159]

Might throw off the balance.

[@b3rz3rk3r9]

@kagemushashien8394 that's what I was saying: split the top to open sideways to allow an easier draw. My apologies, I think I flubbed something in explaining the idea.

[@kagemushashien8394]

@@b3rz3rk3r9 Well, I thought you were saying like put some sort of machine mechanism that has springs in the sheath, but hey, that's gonna be a great idea for the game I'm making, it's Medieval Steampunkish, a great way to sheath Heavy weapons, let's say, Grand swords like a longer Nodachi.

[@b3rz3rk3r9]

@kagemushashien8394 the spring mechanism idea might be for the spine. A panel at the back end to assist closing the top back together when sheathing the sword that'll pull the other sides down. The lock would be on the sword itself, ideally. After all, the locking mechanism couldn't realistically work on the sheath since you'd need to have devices working perfectly in tandem. Ideally, a trigger that pulls down the locking pins for a quick release. And to hold it together outside of combat: some latches on the opening parts like an old wooden chest or clock. And keeping it dry is simple: go old school and wrap it in a thick decorative cloth like other katana.

[@nemesisofeden]

My 3.5 DND rouge was a dwarf named Ildi. She made up for her smaller size and lack of range by wielding a Nodachi with the Expertise skill. She had a finishing move where she would turn the blade skyward, impale the enemy, lift them up and let them slide down the blade until they were cut in half.

[@Leo.23232]

why not play to your strengths if you are smaller

[@elone4567]

​@@Leo.23232 that wouldn't be as hilarious or bad ass

[@Leo.23232]

@@elone4567 yeah i get it, its just that i see people commonly have the notion similar to this where if you are shorter, use a longer weapon to make up for it which is backwards imo, you should instead use a shield and get in as close as possible where your reach is now an advantage but anyway

[@elone4567]

@@Leo.23232 ah but you're thinking a bit too practical

[@Leo.23232]

@@elone4567 in this situation, im saying i see people bring this kind of thing up alot and i was talking generally

[@Earthenfist]

When dealing with the weightyness and handling, keep in mind the 'proscribed' movements for the blade- they were not often used in chopping cuts, I believe, as the entire katana shape was meant for more flowing draw-cuts rather than chops. The goal was for maximum blade-in-contact time, to let the edge slice, rather than impactful splitting chops.

[@simounobrien9096]

This channel never ceases to amaze me. Keep up the fantastic work!

[@Sgt_SealCluber]

I bought a d30 specifically so I could use a Nodachi in D&D 2E (I believe). It started of doing a d20 damage, but there was either something with the weapon or a spell that could cause you to "increase the damage die". If you didn't have a d30, then it would have to go up to a d100 which was never allowed for obvious reasons.

[@kaltaron1284]

Interesting. The most crazy games I know regarding use of different dice are Earthdawn and Warhammer 40K 2nd edition. Most likely Rogue Trader aka 1st edition too.

[@chrisfields8077]

I think a better price comparison is the newer windlass Royal Armouries two handed sword, as it's a better historical geometry and the price reflects that. I think that one is 800$ish.

[@NeroDeAngelo]

That is a interesting Nodachi... the hilt is actually quite short! Usually a Nodachi has a longer hilt, sometimes twice as big as a Katana hilt, to counter balance the blades weight. Not to be confused with the Nagamaki, which is half blade, half hilt! You might want to check out a Nodachi with a little longer hilt!

[@amg5787]

Ever since Bushido Blade game, I’ve loved the Nodachi. I know I’m going to love this video

[@nanaki-seto]

Nodachi requires much greater skill than kantanas etc They are absolutely not the same type of sword they might look like they are but they are not. In the right hands a nodachi is devastatingly effective

[@VencentCross]

any chance you guys can talk about the Nagamaki? i dont think a single video exists which goes into any kind of depth with that particular blade and its a shame because its such an interesting sword in design.

[@travishancock9120]

Your audio quality for filming outside is really good. Keep up the good work.

[@MrRaposaum]

The wiggle he felt from swinging the nodachi was from it being spring-steel, no? There is a reason why it functions better as a hardened single-edged sword. I know you like spring-still better but its not "only pros and no cons" in the dichotomy of spring steel to hardened steel.

[@kencoffman7145]

Personally, a thousand dollar sword would be a bucket list purchase. The item had bst fit the price. That being said, it's a lot of blade! I feel it would benefit from a longer handle. Could you please give a thought to doing a series on modifying cheap blades to what you want?? I've made a tomahawk out of a 12 dollar carpenter hatchet, and turned a meyerco machete axe thing into a parang/golok because that's what I wanted. Buy inexpensive and make it your own

[@chrisfields8077]

With the pool noodle array, the duck tape is actually the hard part of target than the pool noodles. Maybe switch over to masking tape.

[@LBJedi]

This is so cool! I’d love to see a comparison of the effectiveness of a bunch of different anti-cavalry weapons.

[@BarteldsJunior]

The Nodachi was "mostly" used (around edo) in show performances, so they used tricks to draw the sword by turning around whilst grabbing the blade for a short second while pulling it out. afaik

[@BarteldsJunior]

Source "How to Draw & Sheath a 150cm/60in Long Katana"

[@eagle162]

They weren't,you find actual schools that teach how to use nodachi from the sengoku period today, ming dynasty manuals also show how to use swords that were directly influenced by nodachi, its use continued well into the qing dynasty.

[@zaqzilla1]

Over history there have been weapons that were fielded, but never really refined. The nodachi always felt like one of those.

[@izenheimreborn6390]

I would love to see Shad's opinion on the absolute beast of a sword known as the Chinese war sword. The sword which was used by Chinese peasants during the many Chinese/Mongolian wars was a hecking chonka. The one I own is shorter than the Katana, and the tip is 6.4 cm across (2 inches across). There is no other weapon that hits like a truck to me than the Chinese War Sword

[@samueltang6614]

Do you mean like da dao (大刀？）

[@samueltang6614]

Specifically the dynastic models, there’s a military saber that evolved from it that was used till ww2 that a heckin chonka as well, would hate to be out of ammo and facing down one of those da dao charges 😮

[@eagle162]

If I'm correct of the design you're talking about that was not used during any kind of Mongol war that was a much later design.

[@ethanlowery1074]

Hey love you content as a katana lover I also recognize the difficulty in edge alignment. You have to micro manage the blades direction to get the cleanest cuts possible.

[@A_Medieval_Shadow]

When wielding a Zweihander, I really like the handle being a quarter of the whole lenght. It gives enough space to place your hands apart for leverage. The hilt on the nodachi looks somewhat smaller, even for the proportions of this sword.

[@harmonicarchipelgo9351]

I have heard that Nodachi are very unusual swords and in Japan there are specialized techniques for using them. I wonder how the performance would change if the edge was properly sharpened and you study Nodachi techniques.

[@SeanCrosser]

Most of the technique makes a difference when you're facing an opponent. Not so much with cutting tests.

[@harmonicarchipelgo9351]

@@SeanCrosser I was referring to their criticisms of its balance and wielding. For cutting, it was pretty good when you consider the edge was not evenly sharpened.

[@dominiclapinta8537]

I own a double layered handle, shirasaya in dark red, and it is single pinned. The double layer handle makes it so that you can seriously use the sword, without the handle cracking . But I have removed the pin before and cannot get the blade to come our of the handle. So, if it is made right, a single pin is great.

[@SeanCrosser]

Yeah double-pinning is mostly a security measure more so than stability. Properly made sword would have the filed tang rusted-in, and stick very well to the tsuka core.

[@dominiclapinta8537]

@@SeanCrosser and even more, is that is got this sword for under 100 dollars on Amazon. It's 1045 high carbon steel. Holds a decent edge. But it doesn't have a hamon. I was surprised about it once I really examined it. It was intentionally designed to be seriously used instead or like other shirasaya that are single layered and handles crack.

[@thestormcraft4012]

so a couple things to point out at 8:00 they went into how the tips were made on traditional katana, now i have seen the smiths at work when they make them and the tips are actually forged into shape, rather then ground in, the only grinding done is to get the edge and polish after hardening so the smith is required to shape in everything with a hand hammer. Of course this level of skill would only be found on the highest end katanas which generally price(these are for true authentic katana) of around 2 grand at the least. second at 8:40 they discuss the fitting known as the Koiguchi typically made out of some kind of tusk or horn such as from an elephant as metal is NEVER used in the koiguchi in traditional katanas since tahamaganae steel loses its edge quite easily if not properly maintained. that is it, thank you for listening to my ted talk.

[@hvymax]

The best use for such a blade would be a mounted charge. Reaching downward the point would align nicely for penetration.

[@Tent316]

I feel like it proved more that I would want to get that claymore than a nodachi lol

[@alexanderrupert4379]

Ah, yes. The washing pole.

[@collinnicolazzo2065]

Nice reference to both history and dark souls

[@TheSteam02]

@@collinnicolazzo2065 There are a *few* references here :)

[@collinnicolazzo2065]

@@TheSteam02 indeed quite a few

[@hvymax]

I find it absolutely amazing that the blade wasn't bent on the chopping test.

[@Noce_D_Cocco]

17:16 Visually speaking, those motions just look gorgeous with the Katana, the way its curved blade flows with the movements is so satisfying to look at.

[@tydbyt1191]

A very interesting sword. But can it's true power can only be wielded by the One-Winged Angel?

[@felx233]

It seems to me that they are not seeing the true purpose of the nodachi, it is a sword to give mostly downward vertical cuts followed by upward and horizontal cuts, not to give inclined cuts, that is why it becomes so unbalanced when giving inclined cuts, but it is good to make horizontal cuts and especially vertical cuts downwards, that is how it cuts best. It's not for quick cuts either, but rather a very powerful sweep. I think they evaluated the nodachi more than anything on things it's not made for. Edit: In addition, the handle of that nodachi is very short, generally the handle of the nodachi is longer to allow better handling of the sword

[@Koushakur]

They did explicitly state in the video that they've never handled a nodachi before, so using it like other greatswords they have used is only natural

[@felx233]

@@Koushakur Yes, but anyone who watches this video thinks that the nodachi is very bad, they even said that a sword has never disappointed them so much, but in reality it is good, they are just using it wrong

[@zwidowca1]

@@felx233 TBH there might be some bias there but: a) fittings were getting loose on the handle. Objective issue; b) factual observations are still important - if the sword wants to roll in a particular way and makes it harder for them to cut with, then for the reviewers it is a factual issue for them and thus it is a problem in their review; c) it is not just about "how to use a nodachi right". This sword, simply put, is not worth a 1000$. Cheap fittings hurt the review. That's an objective issue; d) the sharpness or edge retention was uneven. That is an objective issue; e) "Edit: In addition, the handle of that nodachi is very short, generally the handle of the nodachi is longer to allow better handling of the sword" In your own words, this sword has a badly made handle. That is also an objective issue; f) if you dislike how the sword handles, and it is not objectively the fault of how the sword is made, it is STILL remains an issue. Even if this is subjective and reactions will be different if you know/don't know how to use said sword, it just blatently tells you that it is not easy to use. If you need specific technique to make it work properly then the weapon is getting more complex, which is not great. Simpler and easier to train with usually means better. This point is highly subjective tho; g) If they stated that no other sword disappointed them so much, then clearly in their opinion that is how they feel about said sword. They have to convey what they think otherwise this review would be... well... a big fat lie?

[@felx233]

@@zwidowca1 My main language is not English, so I had a hard time understanding it, but I did my best. For me that nodachi is not very well made, the handle of a nodachi would have to be much longer, that handle is that of an average katana, and the handle of a nodachi should be lengthened, since if you lengthen the blade you must also lengthen the handle, if it does not become too unbalanced I'm not saying that the nodachi is very difficult to use, what I'm saying is that above all that nodachi in the video is not made for certain things, mainly with that short handle it is not going to be very good for making inclined cuts, nor for making quick cuts. , but these things were mainly evaluated in the video. I also have the feeling that the claymore was sharper compared to the nodachi, I don't know if that nodachi had a good edge, because of the damage it did with the foam tubes, it doesn't seem to me that it was very sharp

[@PhantomGato-v-]

No Japanese sword is made for inclined cuts tho lol

[@Y33haw355]

If you're in Europe, Yari no Hanzo sell a lovely nodachi for about €400. 130cm blade, 40cm handle, and 1060 carbon steel.

[@threefingered1918]

This is my favourite weapon though out history so glad to see an episode dedicated to it

[@Volper1]

19:27 it’s almost like the nodatchi was designed for an entirely different style of combat than a western middle age sword. 😅

[@sakesaurus1706]

lol yeah I mean, that's what reviewers generally do, they usually don't know how to change their standards per piece. But still it's insightful for someone who never fought with swords

[@Gaius453]

Next you should review an european greatsword, like a montante.

[@DarioKalen_Kagenui]

Great video as always. 💯🔥

[@SrChr778]

Nodachi, or the "Japanese longsword", was mainly used against enemy Calvery units. But with a long blade and only a normal sized handle, that made it harder to control. Meaning all the forward weight would be on the blade's end, and to compensate, you'd have to move along with the blade. Yet in that kind of situation, your movements would look both silly and predictable. And you know what they say about predictability on the battlefield. Then longer handle designs came in, which gave it that proper balance & control. So, if you think this longsword is great, forge one with a longer handle and you'll see what I mean.

[@Ederick1936]

so you had said it in an earlier video and pretty much alluded to it again here. Nodachi is very likely not a linguistic slide from ōdachi. the ō in ōdachi means that it is a long vowel (properly spelt in hiragana it is おお) which is a prefix meaning "Big" that is where you are correct in assuming that ōdachi (おおだち) or in Kanji 大太刀 means "Big tachi". Nodachi however uses the Kanji 野 as it's first kanji representing the "no" phonetic. this Kanji can't stand alone and is typically in front of words that have something to do with a field. an example is baseball which is Yakyuu (野球) or more importantly battlefield 野戦 Yasan (the Kanji can also represent a Ya phonetic like seen in these words because.. well because kanji goona be kanji). the most widely accepted theory on the word nodachi is that it uses the kanji for field to take on the meaning broadly of "field sword". most dictionaries etc will tell you that the word means something along the lines of "extra long sword" because frankly that's what it means, but the explanation of how the word came to be is most likely what I had outlined above.

[@SeanCrosser]

See also Hakama and Nobakama. It's a common mistake to just equate O = No because of Odachi and Nodachi referring to the same thing.

[@kaltaron1284]

Mostly correct but 野 can stand alone and simply mean field. And as you probably know the reason for all the different pronunciations is that Kanji are a wierd mix of spoken Japanese with Chinese characters. And later they also merged some when they tried to cut down their number.

[@lildragon6415]

Nodachi = Field Tachi Odachi = Big Tachi

[@TheSteam02]

Both are the same sword.

[@lildragon6415]

​@@TheSteam02Yes, nodachi and odachi are two words for the same sword. I just wanted to clarify because at about 4:25 of the video, Shad said nodachi means big tachi. That is technically incorrect because nodachi is field tachi. Odachi is big tachi.

[@ThePuppeteer0117]

Judging from the fittings, that blade is meant to be worn with the blade facing down like traditional tachis before uchigatana (katana) is made with the blade facing up. The tsuka handle is too short for that blade. Too short as if it's just taken off from a standard katana and just fitted to a larger blade that is why it's a bit too top heavy. All in all, it looks great and I hope more odachi/nodachi are made because they are just awesome!

[@ThePuppeteer0117]

P.S. If you want a Nodachi with a straight, single edge blade... then you can look at the Chinese Chang Dao or Zhanmadao. Both are big, long swords and I think you'll like them. Also, can you review a Naginata? That'll be awesome! Love your videos, keep it up.

[@Blizzaurian]

28:30 is definitely a good show of Tyranth's edge alignment and skill... Good show man!

[@bilboswaggings]

I do think the Nodachi has lower demand, which means the price has to be higher to compensate

[@RobinFromAshes]

Looks like a short handle for that big of a nodachi-blade..

[@angelpoloo2]

I love you guys , keep up the good work

[@VanTesla]

Shad again liked the swords the longway😁 The handles/guard being cheap sucks though and shouldn't be a grand over if the hilt is already coming undone.

[@CharlesZane_]

IIRC Metatron has a really nice Nodachi, if you wanted to get an opinion from someone regarding quality/pricing.

[@NicholasFisher_KhFan]

Can you do a review of kingdom hearts combat and there keyblades and how affective they are please. I would like to know your opinion. But the keyblades might have to be a different video there are a lot of them

[@NicholasproclaimerofMessiah]

Nice cutting! Both of you, and especially Tyranth.

[@evanholman4876]

just wanted to say ive been around since the earlier days of shad when it was just the man in the chair, and personally ive only enjoyed this content more and more, to me each video is better than the last and tyranth is my new wifu

[@ravoniesravenshir3926]

@Shadiversity. OH THAT IS NOTHING... GET A ODATCHI :D Its a Anti-Calvary Sword.

[@demoulius1529]

I was expecting it to perform worse. But for the price point it still seems abit steep.

[@sevenproxies4255]

No-dachi have always been pricey. Even since the days of the samurai. Bit more complicated to manufacture than regular katana.

[@kamirostorino9416]

I do have a Katana that i payes 1k PLN for (so between 200-250 USD) and It is good quality, double pin handle and it does not look bad in terms of artistic. but it was also made in Poland by a blacksmith that trained in japan so it being locally made probably affected the price

[@Secret_Moon]

The rolling out of edge alignment is because the longer and more curved blade makes the center of grativy way above the line of the handle.

[@razorcrest9363]

I wonder if the curve gives the blade more durability when striking against hard targets since it is structured in a way to counteract the blade bending forward.

[@dq3w]

Took long enough, love seeing variety of swords and weapons. Do you think you’ll cover more modern weapons like super early guns or some other uncommon weapons?

[@liamprice1947]

Good alternatives for tatami mats are rolled up cardboard or newspapers, typically soaked with water to make them more dense, bound with tape or something

[@sternis1]

The brass-thingy on the scabbard is just there for the sorws to make a "kshiing"-sound when you draw our sheath it.

[@Lemunde]

That spring steel blade is doing all the heavy lifting on this sword in terms of quality. They took filet mignon, over cooked it, and served it with a side of canned store brand beans. My take away from this is it's a decent sword if you can tame it and you don't have to pay for it.

[@SeanCrosser]

Yeah it's better served by dismantling it and remaking the fittings. Maybe make a longer handle?

[@Demnus]

Well, I understand that it's a sword test and review and not the wielders. I understand that ease of use is the property of the weapon that defines the objective advantage. But I cant think of you both lacking in technique of using it. It was meant to slice, not hit things. But you used it as a cleaver. It was painful to watch at so many levels...

[@BasedChadman]

What are you expecting them to do? Glide the blade along what they're cutting? Most katanas "chop" just fine, as is a sword's nature as a martial weapon.

[@hvymax]

I'm considering making a sleeved grip for my Nodachi and filling the last few inches with lead for balance. My blade is probably twice the weight with a 1/4" spine and 2 1/2"section of a 42" blade unfullered. I have it broken down for a more Rapierish 2 handed handle and fullering the blade.

[@Nathan_Speaks]

I like these videos man❤❤❤❤❤❤

[@m4gmar]

Hi Shad and team, since you have been covering a lot of Katanas and Japanese Style sword. I would like you to talk about the NAGAMAKI next. It basically is an older variation of the Nodachi mainly used around the XII y XIV Century. Instead of a long blade they made it so you have a longer handle (more like a half spear or a Naginata). I Strongly believe that the Nagamaki is way better than the Nodachi because it maintains the reach of a Nodachi while getting rid of the obvious weakness that comes with a large piece of steel. Thanks in advance

[@insaneanimal4]

Went a dual gun show, it had antique arms and actual gunshow. I found a table with a Nodachi. I could tell by the look it wasn’t the highest quality, fake manta skin, leather wrap that was newer, and the blade had some rust. I was offered a deal of a “not working” “revolver” sorta gun. The deal was for $120~ the cost for just the sword was $100~ about

[@gimilijonnes]

So, one thing you always have to keep in mind is that Nodachis were not designed to be used in HEMA... some moves were not performed at all, so saying they feel strange when doing with a Nodachi is understandable. About the cutting part: you guys even said yourselves that the sharpness of upper part of the edge was crappy. So that had a big impact in performance, i think...

[@jacobweatherford4696]

I love nodachis they can be as long as a really long longsword to the length of a greatsword.

[@steelwasp9375]

The shots at 33:30 and 34:04 are very cool, good job cameraman! The whitewashed effect on the castle gives it an otherworldly flavour.

[@allopez8563]

Try wet paper rolls they have more weight than pool noodles. When newspapers were still a thing these were cheap options for target cutting. But one can get brown paper rolls from hardware stores of differents length.

[@taronzgaming7739]

My instinct when you guys first discussed the price, and went over the basic fit and finish would have been if it were at most about 750ish, there'd more easily be a market for it, the 200ish difference between that and the price they charge, would be enough to either overlook, or get yourself some nice fittings and upgrade your blade.

[@wild_lee_coyote]

The loop on the back is to help tie the hilt to your hand. It helps by providing counter tension to the weight of the blade. I think it would be better if you compared the sword you have to a historical example.

[@jamesthomas6234]

And also for a tatami replacement I have seen HEMA groups use wet cardboard that they have rolled up tightly to use for cutting practice.

[@baldeaglearrage3450]

one of the things about longer swords. they do more of a reaping motion then a slash. it's an interesting balance.

[@asa-punkatsouthvinland7145]

However the Windlass English two-handed sword is currently disconnected it was around $370 (US$) The closest Windlass makes now is the 15th Century Two-Handed Sword from the Royal Armouries collection, looks basically the same, black instead of blue but is $745 on Museum Replicas & $795 on Kult of Athena.

[@R3DSHlFT]

Tachi and longer are supposed to be blade down in both wearing as well as in displaying. The thing where the rope is tight to on the saya, that's the front and is supposed to face outward