Sheet metal tutorial | Rip flange & Split Area in Creo Parametric

Let's understand the basics for sheet metal design by designing this part in Creo Parametric
Sheet metal UNBEND
• Sheet metal tutorial |...
Transitional unbend
• Sheet metal tutorial |...
Crossection driven unbend
• Sheet metal tutorial |...
The basic sheet metal design
• Sheet metal tutorials ...

[@kandularajesh3237]

Thanks bro it's really helpful

[@anilkumarm3846]

In sheet metal if u choose extrude it ill come like walls but u got solid in second half

[@villageboy9424]

How to make split area in curvedsurface

[@AnuragRawat12]

sir, in this part we can also create flat by tangent radius for deformation area , which will we the correct flat for practical accuracy?

[@CADxTraining]

Both method are ok. You can go with anyone.

[@surajkale6499]

could you please make a video on weight calculation in creo and adding it in drawing?

[@CADxTraining]

kzbin.info/www/bejne/jHrJl5KAaqhkhK8

[@surajkale6499]

@@CADxTraining thanks......could you please explain bend allowance tab in creo and how to calculate flat development length from bend allowance for the manufacturing of sheet metal part ( laser cutting of flat sheet)

[@ajayn4480]

In this video your part is solid but it's look like surface part ( bluish) colour. Why

[@CADxTraining]

It's just a appearance.

[@ajayn4480]

@@CADxTraining ok. Any video related to analysis

[@villageboy9424]

How to make split area in curved surface

[@CADxTraining]

Split area only works with the surface created in sheet metal environment.

[@villageboy9424]

@@CADxTraining sir, please make one video for split area options in curved surface

[@nisarghajari7499]

There you had 3 lines only then how it converted into rounded corners?

[@CADxTraining]

Creo automatically add bend radius for all bend corners. You can control the size of the bend round.

[@nisarghajari7499]

@@CADxTraining how I can do that ? Any link of your video? I am using creo 4. Which version of creo you are using?

[@vvvipin1]

sir, while creating the flange(@3:48 ) a gap is formed while selecting the other edges for flange and cannot be cleared by decreasing the size

[@CADxTraining]

Increase the size of the bend radius for the previous feature first. Keep the bend radius 5 times the thickness.

[@vvvipin1]

@@CADxTraining THANK YOU

[@vvvipin1]

sir, where can we get creo practice sketchs or drawings for both sheet metal and part modelling(for practice)

[@CADxTraining]

Take the snapshot in HD resolution

[@bittusharma2312]

Its not going above than 2 times the radius what to do please tell

[@Dharma126]

Sir I have doubts

[@Dharma126]

This 60 vedio have all tools explanation in sheet metal ??

[@CADxTraining]

Yes

[@douglascharita5591]

I really love your videos, can I add you in skype ?

[@CADxTraining]

You can ask any doubt anytime. You can write your doubts in the comments below. Sorry about the Skype.