Tiny Whoop Throttle Management

[@omnibot6325]

BABY OBSTACLES! Great lesson, thanks for making it. This is definitely my weak spot.

[@ChrisWalshTech]

Cool exercise! I’ll have to try it. Thanks for posting!

[@RW12345]

Thanks - I struggle with throttle management so this is an excellent idea for me.

[@Shkd64]

Randy Wahlfeldt awesome. Good luck.

[@iamkeef]

This is a great tutorial. Nice work.

[@Shkd64]

iamkeef thank you. Much appreciated!!!

[@jeffdonaldson655]

Another great video

[@Shkd64]

Jeff Donaldson thank you very much!!!

[@fallingwithstylefpv4759]

Thanks For this! It’d be could to show dropping altitude to.... gates at different levels. Thanks for the content!

[@swimbeyonder]

Learning fpv is a really difficult thing, im using liftoff and completing a race with no crash is very very difficult...

[@maripido]

this is great! thanks for the video. Learned a lot here

[@rfly-fpv]

Nice video but a bit too loud background music :)

[@brucesdad13]

Great video :)

[@Shkd64]

Charles Stevenson thank you!!

[@FSM979]

thx !

[@cyberduck7377]

I need more practice

[@johnhouston1970]

That was great, Thank you much

[@doktordrone]

thank you very much :)

[@kainenakcatraz7459]

I wish i can do this but, my tiny whoop needs max throttle just to get off the ground then it just slowly descends down to the ground and done.

[@xplosionfpv682]

replace motors and batteries, it's one of those. I like the betafpv insane motors, and the betafpv 300mah batteries. that should solve your issue. also make sure your whoop is under or ecactly 20grams. if you have excessive hot glue or a heavy canopy take it off. Fly alienzero, best tiny whoop board ever!!

[@mafiafpv3469]

What pids are you using?

[@RevO-One]

I think its a basic inductrix board so not adjustable

[@SR13_fpv]

👍🏻

[@djm8519]

Enjoyed, what motors?

[@Shkd64]

Dj M thanks. They are special sauce motors from tinywhoop.com!!

[@miguel-iyofpv6046]

Hi Scott I don't found CLI document for the betafpv fc and cofigure OSD. Can i contact you?

[@Shkd64]

Miguel-iyo FPV are you in that Facebook group? Feel free to message me too!

[@miguel-iyofpv6046]

SkeattsFPV I don't use Facebook...there is a possibility that you can send me the file? Please.

[@Shkd64]

Here’s the diff... # diff # Betaflight / BETAFLIGHTF3 (BFF3) 3.2.0 Sep 28 2017 / 16:16:50 (ceb6f70) MSP API: 1.36 feature AIRMODE beeper -GYRO_CALIBRATED beeper -RX_LOST beeper -RX_LOST_LANDING beeper -DISARMING beeper -ARMING beeper -ARMING_GPS_FIX beeper -BAT_CRIT_LOW beeper -BAT_LOW beeper -RX_SET beeper -ACC_CALIBRATION beeper -ACC_CALIBRATION_FAIL beeper -READY_BEEP beeper -MULTI_BEEPS beeper -ARMED beeper -SYSTEM_INIT beeper -ON_USB beeper -BLACKBOX_ERASE map TAER1234 aux 0 0 0 1700 2100 aux 1 1 1 925 1325 set acc_trim_roll = -28 set motor_pwm_protocol = BRUSHED set motor_pwm_rate = 16000 set bat_capacity = 200 set vbat_max_cell_voltage = 44 set vbat_min_cell_voltage = 29 set vbat_warning_cell_voltage = 31 set yaw_motors_reversed = ON set deadband = 5 set yaw_deadband = 10 set osd_tim2 = 513 set osd_vbat_pos = 2402 set osd_rssi_pos = 40 set osd_tim_1_pos = 54 set osd_tim_2_pos = 2422 set osd_flymode_pos = 333 set osd_throttle_pos = 225 set osd_vtx_channel_pos = 377 set osd_crosshairs = 200 set osd_ah_sbar = 200 set osd_ah_pos = 200 set osd_current_pos = 385 set osd_mah_drawn_pos = 353 set osd_craft_name_pos = 33 set osd_gps_speed_pos = 218 set osd_gps_lon_pos = 82 set osd_gps_lat_pos = 65 set osd_gps_sats_pos = 51 set osd_home_dir_pos = 302 set osd_home_dist_pos = 303 set osd_compass_bar_pos = 42 set osd_altitude_pos = 247 set osd_pid_roll_pos = 423 set osd_pid_pitch_pos = 455 set osd_pid_yaw_pos = 487 set osd_debug_pos = 1 set osd_power_pos = 321 set osd_pidrate_profile_pos = 345 set osd_warnings_pos = 138 set osd_avg_cell_voltage_pos = 76 set osd_pit_ang_pos = 33 set osd_rol_ang_pos = 65 set osd_battery_usage_pos = 392 set osd_disarmed_pos = 267 set osd_nheading_pos = 311 set osd_nvario_pos = 279 set osd_esc_tmp_pos = 82 set osd_esc_rpm_pos = 83 set osd_stat_max_spd = OFF set osd_stat_min_rssi = OFF set osd_stat_max_curr = OFF set osd_stat_used_mah = OFF set osd_stat_bbox = OFF set osd_stat_endbatt = ON set osd_stat_bb_no = OFF set osd_stat_tim_1 = ON set vcd_video_system = 2 profile 0 set p_pitch = 110 set d_pitch = 50 set p_roll = 100 set i_roll = 55 set d_roll = 50 set p_yaw = 120 set i_yaw = 55 set d_yaw = 25 rateprofile 0 set rc_rate = 108 set rc_rate_yaw = 110 set rc_expo = 20 set rc_expo_yaw = 20 set roll_srate = 80 set pitch_srate = 80 set yaw_srate = 80

[@miguel-iyofpv6046]

SkeattsFPV thanks you very very much 👍👍

[@bejogaming7206]

what mode..??

[@Shkd64]

Angle mode for racing

[@bejogaming7206]

@@Shkd64 why not acro. ??

[@Shkd64]

I fly acro for freestyle but angle mode is preferred by most for racing. One of those great debates. Tighter turns and more precision in angle but everyone has their own preferences