Shop upgrades. Loft build part 7. redoing the rest of it

[@Dante_S550_Turbo]

1 heavily under rated shop upgrade people often look over. Anti fatigue mats, your joints and older you will thank you.

[@trahar6257]

I’ve considered covering my entire floor in gym mats but I only have 500sq ft so it almost reasonable

[@Jehu_Style]

Got a commercial kitchen non slip anti fatigue mat in front of my toolbox at work. I love it

[@gregmanzolillo8666]

tractor supply horse stall mats work much better, things can actually roll on them, they dont slide on you, and drainage underneath

[@kaleblevi44]

You should do another tool list of everything you have. Stuff you use daily, stuff you thought you’d use and never do. Been awhile since we seen one of those videos

[@Taylordrifts]

@@kaleblevi44 I do need to do that. I don’t know if I could make it on here. But there’s a lot of tools I thought I would use and never do. And vice versa. Maybe I’ll do one on here. Would be nice to do a video that takes a day or two to film vs 5-7 days. Lol

[@SOfilmable]

@@Taylordrifts Would love that too !! btw the box color is amazing ! Jaguar style box

[@slaphands7703]

@@TaylordriftsI’d like to see it. I’m an HVAC tech and appreciate the tools. I’ve reduced my tools dramatically over the years. I can fix 99% of everything with a tiny tool pouch. Not necessarily the best tools for the job but quality multi purpose tools because I need to carry them everywhere. Weight reduction was key. Different for a shop setup but still purpose built tool list.

[@ZenOwl]

@@Taylordrifts I would watch this for sure

[@slaphands7703]

Looks like a super high end bank vault.

[@mtownfiremedic]

As a Wisconsin man, I approve of the Green Bay Packer tool box. Proud of you my guy. You deserve all the come ups. Keep up the fine work!

[@willb3018]

It does look great. Steeler fan approved.😉

[@oceanious22]

Shop upgrade vids are LIT! The day we transition from shop upgrades to first big build, and seeing the shop upgrades in action, is going to be a banger!

[@ddracing937]

You could run the speaker wires through the peg board holes in the lower corners. That would hide them well. Even if you had to drill one hole in each lower corner if the wires were a little to big you wouldn’t ever need to use them lower corner holes anyway. Love the shop updates it’s a dream shop for sure. Keep down what you’re doing

[@roberta4989]

As a retired mechanic that visited the Snap-On and Mac tool trucks every week for years, I appreciate your comments and respect for quality tool boxes. I still own my Snap-On boxes - bottom, middle and top at nearly 6 feet tall. All the drawers are full of Metric and Imperial tools, many duplicate and triples which were necessary in the flat rate mechanic world. Love your tool room on wheels (new box) hate the green.

[@skilled1140]

Super impressed at how far the shop has come. What a great layout! You should add a tray above the pack-out boxes on your fab table so you don't fill them with metal shavings and can catch them all.

[@stefanoraccanello7155]

Just a thought, big brass pole from floor to roof just off the storage side of the loft. Could make getting down much quicker than having to go all the way back to the stairs. Firehouse vibes 👌🏼

[@jaysmith3399]

I don't really like your drifting videos, but I absolutely love your shop, car builds and everything else! The new GIGANTIC toolbox is BAD ASS! THE SHOP IS LOOKING GREAT.

[@crazymike401]

I been watching for years and legit fast forward through all drifting

[@KitchinMotorsports]

Big same, been enjoying the lawn, shop upgrades and car building than the drifting because everyone does drifting videos so it’s boring to me to watch.

[@FrankCastleCS_ArenaBreakout]

Y’all are boring asf

[@proudpennsylvaniaman7996]

I never watch the Drifting either.

[@chrisgilmour831]

I don't really care for raw audio/in car footage. But to follow a car build then get to see the pay off in the form of a out of car montage to good music is always great

[@Thatdirty1J]

Woo more shop upgrades!! Been loving this series man so cool to see it developing

[@broodo1]

Most guys wanna LS swap the world Taylor wants to level (parking) caster the world 😂😂

[@Kmkboyz15]

I feel you should just make the side with your compressor your wiring and hose building spot. That will allow you to buy more tools for crimping, etc, and build a small table. That also would allow you to reuse them toolboxes like you are currently trying to do and the packout boxes. That would be my two sense of making use of that area while keeping that hangout area still available.

[@ZenOwl]

My heart skipped a beat watching it roll to the side of the ramp The box is sick, so happy to see the garage come together! It's turning out awesome!

[@trahar6257]

I looked up the weight of the 72” icon just cause I was curious. It’s 1000lbs. The box he was undloading could have been close to 2000lbs. That was a really bad idea thinking he could control it

[@ZenOwl]

@@trahar6257 I mean, I would've done the same thing. Jobs gotta get done, even if you're by yourself

[@masonthibodeaux4060]

This has got to be in the top 10 best "hobby shops" in existence. Not one square foot is wasted. The layout is incredible. And having R2 just brings it all together, among other things. 😂. Now you just need to get that welding screen up, so you dont roach whatever car is on the bottom with welding slag, and get that compressor outside so you can work in peace, lol. Anywho, Love the videos, man. Keep em coming!

[@claybrinkman533]

For the pliers drawer: I'm not sure if you've got the depth in that specific drawer, but I have a rack for my pliers that holds them on their side rather than flat. It's a much more efficient use of the full drawer volume and you can fit like 3x more pliers in the same space.

[@brianquigley6919]

Yep, Ernst plier holders are the best way to go if you've got the drawer depth.

[@1012Mrjesse]

This! They also make screwdriver organizers of similar style as well

[@devvoid1312]

Also tends to make them easier to grab in a manner that you're actually going to use them

[@NCB88]

I love the shop build videos. As someone who has their own metal building garage, it gives me insight on things i can do next. I know some may complain about just wanting car videos but honestly i stuck around moreso for your builds, your tools and seeing you solve problems whether thats on a car or in the shop. Keep doing what you love man! Cars, shop, live vids, its all been really enjoyable.

[@Scott-Tim]

Agreed! He’s built a really well rounded channel. He needs to get back to driving lol! The builds are top notch but he drives like a bat out of hell…

[@Professionalhomeowner1]

Also consider building a partition in your fab area so you’re not shooting grinder sparks at whatever car is parked there. Oh and get that compressor under the lean to you’ll have so much more room over there!

[@devvoid1312]

He's not concerned about grinder and he basically only tig welds, so he's not worried there either. He responded to my comments on a recent video

[@brandonf.9718]

I love the wide variety of content but I’m ready for some car fabrication videos.

[@ectobluntus]

Agreed, I'm sure he's itching to dig into a project and make use of all the upgrades!

[@brandonf.9718]

@@ectobluntus 100%! No hate here. I can’t wait until he starts a new build!

[@billmadison2032]

if you're done putting stuff on the loft, install the rail before something bad happens

[@NomiosApollo]

better yet fit brackets so that the rails can be removed when necessary.

[@austin012579]

Did you even watch the video?

[@billmadison2032]

@@austin012579 and what is your point?

[@billmadison2032]

@@austin012579 what do you mean

[@billmadison2032]

@austin012579 STFU give mommy her phone back, adults are talking

[@transmissionman9377]

When I started wrenching back in 85ish I started with craftsman and it did the job for a while. As I went on I outgrew the box and needed something bigger but snap-on/mac was out of my price range so I just kept packing it. In 93-ish I was able to afford a snap-on box,I still have it,its a Harely 90th anniversary box. I was able to sell my craftsman box to a younger guy just starting. In 2000 I bought a bank and a half top/bottem box for for 2500,the top box was new and the bottom was lightly used. Like you said, you can tell the difference between a tool truck box and EVERY OTHER brand. I used the box everyday so investing in a quality box was a no brainer.

[@abecar17]

One thing that's really helped me with shop organizing is watching Adam savages "shop organizing" videos. The little tips and tricks have saved me so much space time and energy.

[@devvoid1312]

First order retrieve-ability!

[@MadMedeiros]

I am so happy you actually got a professional tool truck box, I’m actually a snap on dealer! and I’m still happy to see you’ve realized how much better a quality tool box is over hobo freight or even milwaukee… the drawers can take so much weight and most of it is warrantied for life… that box will last you a lifetime! congrats broski

[@nickthornton2342]

Definitely should have put the stacker in the left corner so its a straight shot from the left bay door. Then have 1 big loft and you have the rear rollup door to have a "hybrid" fab area for the noise and welding gas to stay out of the shop more. Im sure it would feel more open that way

[@cameron7187]

Having a large covered work space definitely could've been cool. He talked about having a primary and secondary toolbox meant one became forgotten and definitely feels like there's the potential for that to happen with the loft bays

[@chrisgilmour831]

Picturing this in my head actually sounds soo good. You could use a curtain made of welding shield plastic underneath the loft for keeping smoke/sparks/dust contained under the loft for fab projects. You'd have clear access to the rear door with out having clearance issues on with the stacker. You'd have an open spacious loft you can build isles in one spot, then the rest for hanging. Fab tools and bench under the loft, and mechanic tools in the big chest out in the main shop by the hoists

[@landroversforever]

I've never understood the reasoning behind the stacker going in the middle either. I could maybe understand it if he enclosed the rear lean-to.

[@P-J-W-777]

Your first high end tool box has a special meaning. No matter how hard you want to hate theme once you own one your mind has been forever changed. I utilize SnapOn tool boxes and Matco Service Carts. I also have a Mac tool chest.

[@foxVII]

R2 the best employee you ever bought. A true hero of the shop.

[@BassManBobBassCovers]

Looks absolutely incredible! Dream garage for sure! It's to the point now where it really couldn't be setup any better to take on any massively extensive automotive/mechanical project. Ready to build some cool sh*t! 💯🔥

[@MichaelAverycarhauler1969]

Matco hands down makes the best tool boxes period. You can literally open the top drawer all the way, stand in it, and it WILL NOT tip over. That's a 🔥 colorway too!

[@MrSwantors]

You should make the railings for the loft like a stake body truck. So they protect you when you’re up there not trying to lift stuff up and down. But when you need to you can simply lift it out of its holders and put it aside while you put your objects up there. Then slide it back in the slot when your done

[@KrisKnight91]

As a fellow Marco box owner, have had mine for 12 years, I hope you enjoy it! Didn’t think I’d like that color combo but it is pretty sick

[@samuelyee3424]

Watched you for years man and its so cool to see you upgrading literally everything i remember the videos in the shared shop of you fixing the ls miata ,now your balling with a nice truck really nice trailer own house and shop and a handful of toys i remember when it was just the ls Miata and 3rd gen cummins and sharing a shop and house awesome to see the success

[@oakleyfreak45]

I like this series. It has inspired me to clean out and organize my garage. Having the shop organized will help so much for future builds. The color combo just makes me think of lotus. Maybe you could find one for a project in the future.

[@nathanodowd512]

Incredible work on the shop. The wooden table heading out the door shows just how far you have come since you moved to this house. What would be cool to see is some dedicated movable racking where you can put all the parts needed for a build so that they are accessible when you need them but tucked away when you don’t.

[@philliphoward4065]

Hey Taylor, I can tell you from experience the placement under the minisplit won’t work. I manage properties for a living and I have tried several times to put large pieces under minisplits. It freaks out the steep sensors and will make it not short cycle.

[@lratafia]

thanks, I was looking for someone mentioning this, he would need to reposition that a/c split for sure

[@JeffSlover]

Garage is going to be awesome! The changes you made with the toolbox situation, and rearranging the main floor is going to be huge for your quality of life!

[@stevengary1989]

I love the way the fabrication area turned out along with the rest of the shop & yard

[@Spazum888]

Dude I love what your doing with the place. everything has a place. its practical. common sense zone. love these type of videos

[@soleexplorer5969]

I've been loving the shop series.. but...I'm needing a car build video like a junkie😂😂

[@henrychaos9954]

One idea for additional storage that is often overlooked in hutches; magnets. For a box that is almost always stationary, you can put magnets on the back side of the door and put your most used wrenches, ratchets, pliers, etc hanging under the door, but still shallow and out of the way of reaching to the back.

[@heffe17]

Mount your independent socket rails to a metal place. I used 16g and put screws up from the bottom. You can now stand every rail up. And won’t have to hold the rail to pull a socket off. Way better than free standing or having some lay down.

[@hagggle3727]

Bought a matco triple bay from the matco guy almost 10 years ago when I was a tech at a dealer, best purchase I ever made. It’s a hassle to move on the rare occasion I have to move it, but damn is it so nice to have a gigantic box

[@beyondmaintenance]

You should take a picture of every door/drawer open individually when you are done. Insurance purposes. Good time to do it when it’s all fresh. ✌🏽😎

[@jimmytanner1126]

TR “How it worked on paper in my head!” That’s precious Taylor 😂

[@thomaschumley3904]

The Tool Box Envy is real!!! 🤩

[@KitchinMotorsports]

Happy to see you get yourself a nice box. Last year I upgrade my home shop box to a Snap On 68” Epiq. Honestly love it and will last a lifetime. A nice box is a nice upgrade for that perfect shop.

[@BlackstoneMalone]

The right side of the loft needs a door to a outdoor deck. Pour a nice stamped concrete patio outside below it. Then have regular steps that go up along the side of the shop to it. So if your standing at the side entrance door just about 5 feet to your right you have steps upto the deck. You could so some outdoor storage cabinets below the steps. You then have a covered shaded lowered patio and nice deck above overlooking your house and your property. Then you also have walking access to the lofts from outside. Just make the deck on the outside the same length of the loft on the inside. That'd be so cool and you'd have an outdoor chill spot on both levels aswell as loft access without going inside the shop. If you needed to carry a box or something to the loft you don't have to use R2 or walk the spiral stairs and use the bridge. I'd hang those string lights where each looks like a mini later under the the deck to light up the lower patio. Have a litte outdoor tiki bar chill area on the lower patio Then the upper deck off the loft just have a chill deck with maybe a small grill and some outdoor table and chairs with an umbrella. I just think that'd be a cool easy addition that has multiple benefits and ads some optional access points. Another idea would be removing the rear covered storage roof and building a elevated deck in its place. Then build a new roof that matches the roofline of the shop. Then frame that deck in and make a room with doorways at the back of each loft into it. Then if you don't want to use the bridge just walk into that room and loop around to the other loft. Then you have that entire back room for whatever. It's 30ft wide by however deep your covered storage is.

[@MrBurndan]

Just a suggestion. Some type of wall between the welding work corner and the cars on the lift. Just too protect the cars and keep them clean. Maybe even just a welding screen.

[@BeardMan01]

I have the same box, just with side lockers. 6S Large Triple. Mine is Orange with Blue trim. (Florida Gators color scheme) The only box you can get that's larger is a Snap-on Mr. BIG with top box. Literally a $50k box.

[@MrGuyBroDude]

And that MrBig was worth every single penny! lol. I got a hell of a deal on mine. A guy ordered it, didn't like to colors he picked out for it but already paid half of it off up front and took the hit and ordered another one. So his loss was my big ass gain lol. I paid 22k for mine and the dude literally never even put a single tool in it. It was storm gray with purple trim. They are under just over 30k for most of the options. But it must be nice to have the kind of money to drop 40k on a box and lose out 20k in under a month and just not care because you didn't pay enough attention when ordering lmao. Oh and yes, damn near half of it was empty but my box I traded in was paid off and I got 18k for it on trade so there was absolutely no way in any universe I am not getting a Mr Big for under 5k out of pocket.

[@ClumsyCars]

@@MrGuyBroDude no, it isn't. It's a tremendous waste of money. Nothing requires that many tools.

[@PossessedGaming07]

Love it! Crazy to see how far the shop has come since you bought the house! Looks like a great place to work and chill👌

[@SDSBBQs]

I bet TJ Hunt approves of the British Racing Green and Gold! Nice box... I can't wait to see you set it up and organize it

[@gabejaworski6299]

Toolbox is sweet! These kind of videos of yours are my favorite to watch. Your way of organization has inspired me to do similar in my own garage.👍

[@kennycherry8961]

The top hutch as you call it is actually called over head storage . I got one for my 6S matco tool box and hutch also have a side lockers and I have run out of room in it that’s why I have 2 large tool carts. Collect a lot of tool over the past 30 years in the medium duty truck/automotive industries

[@Decrapitate]

The shop’s looking great 👍🏻 I’m sure it feels satisfying having more usable space and better organization

[@mrlt1151]

I’m currently making a full Gridfinity set for my 56” us general top and bottom boxes. I hate all the off the shelf tool organizers. It’s going to take forever, but won’t cost much and is flexible. It’s also satiating my drive to tinker, and helping me grow my cad and 3d printing skills.

[@ToolBoxTour]

Fantastic looking 6S. I really like that color combo - I don't see it very often. Congrats on the purchase 🍻

[@devvoid1312]

Nice box and upgrades Taylor! The locking drawer on the Matco is used by a lot of techs at shops. Keep paperwork, and anything else sensitive in there without locking the whole box. Looks like you could remove the lid if you don't mind doing light damage to the box. Also, you probably want to avoid lowering the box as youll probably find yourself hitting your head on the hutch or having to bend down to grab stuff from the pegboard.

[@r3drocket659]

Box looks dope af! I have my hutch light mounted to the back of the hutch door, most others I've seen are mounted the same way. Much brighter work space. Organizing a new box is so nice, I have a side locker too. I have a snapon masters and love it.

[@benstrait333]

I don't love the green cabinet in with all the red, but I fully understand how it is when buying used. Having ALL the choices is part of what you're paying the big bucks for when you buy new. The important part is that it looks like it will work well for you👍

[@spicy.d]

For the awning, since you can't support it below you could support it above via small steel wire. Have the edge of the awning "hang" off of the wire up top.

[@justinmalone8518]

glad thats done, im about over the shop build

[@ChristopherOrtega-i7v]

i love when these other channels try to say that the tool truck boxes are comparable to box store brands. the truth of the matter is there is no comparison. depth, thickness, width, quality of unfortunately price as well, but you get what you pay for. second hand tool truck boxes are the way to go , nice purchase

[@avolution33pr2]

Your content is always interesting no matter what the project may be…I am so proud of how far you’ve come since I started watching your videos years ago…Personally I couldn’t care less about what project you’re tackling next…watching your progression is always satisfying no matter if it’s car/shop/home/yard/trailer/bus/truck…you always inspire me in my own projects Taylor…Thanks!

[@TheRedMenaceR]

NO CHILL!!!!! I love these shop updates lol. I've been looking forward to every one and theyve all been amazing. Keep it up

[@yoogityyeet]

Your shop is magnificent Taylor I admire you , Ive been watching you since literally day one when I was 14 I'm 22 now and I still can't afford a drift car , I just recently bought an 04 mustang gt the first "cool" car I've ever had with enough power to do anything but with life's ups and downs I really can't afford do do the things I want . I hope one day I can be as great as you

[@ToriL97]

If you don't want extensions or loose sockets to roll around whenever you open your drawers add some magnetic tool holders. They're 3/16 magnetic plate and hold things in place really nicely.

[@thctraveler8386]

I feel like moving the old box against the loft wall and putting the chairs by the lift would flow better and you’d also be able to see the tv from the chairs aswell as give yourself a nice backdrop for future sim streams/podcasts stuff like that. While still being useable space but also good hangout vibes. Much love always bossman! New box is rad!

[@mwickman13]

Sweet new tool box Taylor, been watching your channel basically since day one, you deserve everything you want you worked for it buddy.

[@katyaker8913]

I have a Matco as well. You can adjust how easy the drawers open and close on the sides where the rails are. In case you wanted to know. And congrats man. Love seeing people get what they deserve!

[@kenforehand9667]

On the one hand... I'm happy/excited for all the new stuff. The shop is INCREDIBLE!!! You've done a GREAT job getting to where you are. I know it was a LOT of hard work. On the other hand... I miss the days in the single car garage with the camera propped up in the top of the old toolbox. You've come a LONG way since then and you have a lot to be proud of. Love the videos! What's the plan for the bus??? I thought for sure we'd be seeing a lot more action in that thing.

[@muthagoose00]

Run the speaker wire through the pegboard and around the back to other speaker

[@travismahoney93]

I think you did a good job organizing everything to keep that open feel in the shop. It’s amazing how quickly a large shop can feel cluttered if all those small details are over looked.

[@Baldwin_media]

man that box is HIDEOUS! probably got a smokin deal on it tho.

[@jared_harris]

I see you with the new gerber razor knife. I’ve had mine for a few weeks and absolutely love it. Much slimmer then the ol Milwaukee and the added pry tool makes my job doing hvac 10x easier

[@tylerhod]

should swap the new loft tool box and the chairs so you can watch the TV in the chill spot and also have the toolbox against the wall so if youre working on something and you drop it it doesnt fall to the ground below

[@mikelawler6100]

Great color combo!! Love organizing them on rainy days.

[@LiftTech22]

A levrack would be so good in this shop. Super clean looking convenient storage solution.

[@RollingwithRuckus]

I like that color combo, the green and gold kinda look like a lowrider car

[@warheadsk8boards]

i like how Taylor zoomed in on the GIGANTIC spider carcass that was smashed behind the packout boxes lol

[@spinpop01]

I bet the mini split is going to keep that top compartment really Cold.

[@Taylordrifts]

@@spinpop01 it should! Which will be nice for playing the sim because it gets hot when playing because the computer. Screen. Motion rig. Wheelbase. Plus you’re basically driving. So ideally we can crank it to icy up there for that.

[@zephyrStat]

@@Taylordriftshe’s talking about the top hutch on the Matco box lol

[@christophers.4007]

@@Taylordrifts wrong mini split my dude

[@kenforehand9667]

Beer fridge...

[@dill5500]

@@kenforehand9667 can spot the alcoholic a mile away 😂

[@johndevries8536]

Love flipping the bench top over! Thanks for your videos!

[@Daniel-j5e5d]

The Milwaukee you move up to the loft would make an awesome entertainment/tv stand i did it with my old box i put some slides on the back to put the tv up and down

[@commanderhawkzz8864]

i wrench for a living i really wanted a cheap box too and i did when i started but having like you said that depth of the drawers is huge and now i have a 84 inch platinum

[@tinos1395]

Love to see you geeking out over the toolbox! And I totally get it😂😂 that thing is fire! Awesome video💪🏻

[@bubbabrown6917]

Sickening how good your organization skills are

[@DrM03N3R]

Sheesh the shop looks great! This series has been so good, thanks Taylor

[@TheYonderGod]

I just got my first tool box, the Harbor Freight 5-drawer cart, and I was just as excited as you were to get the giant Matco box 😂 Obviously I don't have as many tools as you, but all my tools were just on shelves and peg boards before so it's a huge upgrade.

[@kevinpepe9101]

Nice to see the shop come together finally! Nice work, hope it works out like you plan!!

[@pauldohse8550]

One thing people always forget about the entry level toolboxes compared to snap on, mac and matco is the height/depth of the top drawer. a lot of them arent even tall enough to stack sockets on organizers so they end up laying them on there side.

[@apmaquina]

I swear just like in any video game with customization. all the time is spent on the aesthetics of things. I would gush and just stare at and think of all the possibilities with this box lmao. there is something beautiful about having everything in once place and well organized. I love a box like this for model making. (I can't afford to mod real cars lol)

[@legndofcorey]

Most people have cuteness aggression. Taylor has toolbox organization satisfaction aggression.

[@carlosleandry12]

you can route the Speaker wires through the back of the pegboard

[@jamiehancock9357]

I couldn't be more excited even if this was my own shop! I really love your enthusiasm and motivation! Seeing your vision come around has been so cool! 😎

[@PapaJack68]

What a surprisingly wonderful informative relaxing video. Your selected subjective content conjures ideas flooding my brain. Now motivating myself as you were is another story!

[@ThePaimChannel]

about your awning, you need some angle on there to direct the water away from or to where you want the water to go, no much maybe 2 inches of drop. also, you could use tensile rods or steel cables to support it from above, its not too much in your face and you can take that support beam away

[@ViRtUaLheretic]

The awning is a nice touch, however that downspout will channel all of the water into one big stream that will eventually wear on the yard and create a hole. You should really get some kind of gutter and route the water into a downspout and onto a concrete downspout 'splash block' that will take the brunt of the force and in turn not tear up your yard. As an added bonus you can point the splash block away from your garage and house.

[@XFatalQuillX]

Need to upgrade and get some toolgrid also! Make that change myself over the winter and its life changing.

[@craigmalcolm5697]

I’m sure you thought of it, but if you have a big wiring project those stairs are going to do your head in and make you want to pull those boxes back down

[@shawnm696]

You’ll love the new box. I’ve had my 4s triple bay going on 15 years and it isn’t going anywhere.

[@michaelcassidy7645]

If you add a new receptacle box on the right and left then you can put a new piece of conduit between them to get the box back more flush to the wall.

[@Toddford1568]

So I work at a body shop and had a snap on tool box that was 72" traded it for a matco and it's way more of a box. The matco has weight to it when you started down your ramp I don't know how it didn't take off with you. Also the matco drawers can be adjusted on the sliders for different tension and adjusting them to what weight is in the drawers makes them feel even better. Although the game changer for me was getting a nice ish roll cart to be by my side with my common tools or what I need. Also a bought a big light off Amazon that has a switch and I mounted it to the lid. Ive went thru 2 or 3 matco lights for the tool box. I would like to build a car stereo in my box running off a computer power supply.

[@chriszumo4717]

Like the box colors a lot! Would have opted for the snap on epiq just for the power drawer. Love being able to keep all the Milwaukee power tools in there along with the chargers and batteries

[@Mmelke90]

Definitely love the color combo of that box lol you could use the door switch ones for the very top hutch so u have lighting up there