Part 3: BMW M54 Engine Disassembly - Accessories removal

[@yum_yums9423]

By far the best videos on youtube about M54

[@dank8489]

Legend! I’m in the UK and have just bought a m54 and will use your videos to help me rebuild it. Thank you!

[@geopin7672]

I am in the process of doing this to my e39 530i 2002 m54 engine I'm going to install new vacume hoses ,manfold gaskets injector kit new throtle body belts vanos seals head gasket oil pan gasket , etc..my peoject is full restoration.....I'm pro painter by trade but man this my first bmw and i love the way it drives and handles!!! keep up the good work i enjoy your vids,welcome to cali.

[@ShopLifeTV]

Good luck and thanks!

[@lycanzhp1141]

BAZINGA! You did it again :). Clear, concise and to the point. How did you gain such knowledge at such a tender age? E46 forever! Keep the vids coming ! You have helped our community to continue to enjoy our passion for these cars, thank you.

[@ShopLifeTV]

Thanks! Honestly I like to take things apart and I learn a lot by doing so. Being self taught allows me to do things at my own pace and I am passionate about cars so I do not find it hard for me to learn new things.

[@giovargas895]

Brother you are the best... Best for you from Costa Rica.

[@ConcreteJungle7]

Great tutorial Jason, keep up the great work. Your videos have helped me out a lot bro 👍👍👍

[@mavricxx]

One thing I would add to your disassembly and this is from personal experience; before taking off the main drive belt, you want to loosen the water pump pulley bolts or the power steering pulley bolts otherwise you may end up having a difficult time taking those off depending how rusted they are or how stuck they are in there so having the belt there helps hold it in place without damaging it and if you try using a vice or something like that to take it off later you may end up managing those pulleys because they are plastic and fragile, especially if they're very old.

[@TheBorjita17]

we want to see part4 =) great job mate!

[@CmdrStukov]

I have really enjoyed this series - looking forward to the next episode. Keep up the good work. Cheers!

[@malsp5151]

Brilliant! Very clear, very helpful and very professional. Well done and keep doing these vids. Thanks

[@mavricxx]

Man, I've been wanting to see a video like this on step by step for everything on the engine for the longest, of course it's different/easier with it out but it gives us an idea where things are. Could you do a video on how to keep your bolts, nuts and other parts in order when doing something this big? I'd love to rebuild my engine but I'm afraid cause then I won't know where all the different bolts and buts go and get them mixed up.

[@ShopLifeTV]

What you can do is get a piece of cardboard or foamboard and label each bolt as you take it out and put it through the board. Or keep bags for each part that you remove and label the bag. There are also bolt containers that you can buy. Good luck and thanks!

[@shairas4279]

You the best!!!! Love your videos its help a lot.

[@elbassaraghii5744]

Thanks 🙏 for making this video you are very talented, and I learned so much ,😁😎

[@jonzxcv]

Very informative. Keep it up! You should do the same series with other stuff in the engine bay and suspension

[@ShopLifeTV]

Thanks, and I plan on doing it with front and rear suspension as well!

[@JonathanLopez-sn4ky]

Keep up the great work!

[@Dicer328]

Great video, keep up the good work.

[@Guanakito503fcb]

My friend thank you for all your knowledge and sharing it with us🙌 god bless you

[@computiNATEor]

Just FYI, but these M54 engines use a thermostat that is controlled by the DME. The DME heats a wax element that allows the thermostat to open earlier or later.

[@johnny82330]

Dude you're a Saint

[@Luc10011]

These Videos are actually way too good for this viewcount... You don't get a Tutorial this detailled anywhere here on youtube.

[@gusto8069]

Amazing bro!

[@espanolpina]

Do u have to take the manifold out to change the coolant hoses n the middle of the engine?

[@javiersoto4289]

I was changing oil housing seal and I found out one of the bolts was stripped can u recommend me anything so I can fixed pls

[@anders949494]

Is there a way to know if you should change your termostat and water pump? The car get to operating tempetur in normal speed, like 4-5 km of driving normal. Heard they are importent to change

[@ShopLifeTV]

For the thermostat you will get a check engine light if it is bad. But if the car is overheating definitely replace both. I suggest refreshing the cooling system every 100k or less, that includes hoses, water pump, thermostat, expansion tank, and if possible the hard plastic lines under the intake manifold.

[@maxreaper25]

My car has a secondaryy air injector leak in both banks and my check valve hose going to the back of the engine is cracked if I replace that will I be okay?

[@ShopLifeTV]

If the hose is cracked then replacing it should take care of the light. Make sure your pump is running when the car is cold.

[@LesterSanchez]

ARE YOU GOING TO DO ONE PUTTING EVERYTHING BACK?, I JUST FINISH PULLING OFF MY 02 530I INTAKE MANIFOLD BECAUSE THE MIDDLE PLASTIC COOLING PIPE WAS CRACK AND NOW THAT I CHANGE IT AM HAVING SOME PROBLEMS CONNECTING ALL THE THINGS BACK CAN YOU DO ONE PUTTING ALL THE HOSES AND SENSORS BACK ? THANKS MAN ITS MY FIRST TIME DOING THIS.

[@ShopLifeTV]

I will be making a rebuild video, but it will be a while. Which sensors are you having trouble with? Message me on instagram @ShopLifeTV with pics and I might be able to help you better.

[@LesterSanchez]

Awesome man take a Lil bit in the harness connection at the bottom of the intake manifold showing where everything goes to that will be a great help awesome videos man I have to say it feel great doing all this my self

[@LesterSanchez]

i have a question, if i build a copy of this coolant pipes out of aluminum will they work fine ?

[@ShopLifeTV]

I don't see why they wouldnt work fine. And for sure when I start rebuilding the engine ill be sure to go over the wiring thoroughly.

[@LesterSanchez]

ShopLifeTV thanks man awesome, I find this plastic pipes real weak and unreliable am working on building a custom end attachments for the seals I don't want this leaking for as long as possible

[@mattshort5885]

I was a little surprised to see an upgraded (metal impeller) water pump come out of an engine with a cooked head! What happened to this car? Blown expansion tank?

[@ShopLifeTV]

It was one of the other hoses that was split.

[@brendam455]

I cant getthe water pump pullyoff for shit keeps speaning can i leave that on there? Or when i take out the timing change cover?

[@jyrgenfist6021]

Also bolts on oil filtering housing is not all the same

[@hectorortiz9126]

you should make a video of doing the subframe!

[@ShopLifeTV]

I plan on doing a rebuild video of suspension on the e46.

[@jesuscampos6717]

my bmw 2000 323i is leaking oil from banos benjo bolt how I can fix the if you can help me please

[@boudithehunter1320]

Hi mate my BMW X5 is over heating 3.0 I what I should do?

[@ginodavid7318]

I recommend a small rolling stool so you dont have to squat so much

[@rulerss]

I have a question: I need to change the piston rings. How to find a trusted service which can do this operation, without scamming me or damaging the engine? How do I find a professional?

[@MrDanielsahne]

rulerss search for a professional engine rebuilder. but thats not cheap.

[@rulerss]

i found one. he asked me 550-700 euro. i already have the pieces. but i will search for more. you have a great video!

[@Arek_R.]

If I want 18' wheels in e46 I have to do any changes in suspension?

[@johncrosk3448]

Yeah, your car will have to be lifted about 18' off the ground lol.

[@Arek_R.]

Nope

[@phonicgnome5701]

no change in suspension

[@Arek_R.]

Thanks

[@BatamAutoJaya]

great friend

[@gladiatoralmousa5689]

👍

[@MrTian1212]

Good job! But for real, get a impact wrench with low torque pleaaaaaaase/

[@luismanuelsanchez3638]

Porque no los subtitulas al español?????????????????????

[@Datslammed]

Into song?

[@wtpent3012]

hey bro i have a few questions if you coud help my

[@Shroommduke]

OH YEA, Car Porn! Take off that AC pump, take off that alternator, not too fast, now show me that hardware! Engine Disassembly; porn for gear-heads and backyard mechanics!

[@neftalyvazquez117]

10:43