Review: TLR 22SCT 3.0

[@PerryCodes]

Thumbs UP - Thumbs UP - Thumbs UP. There just isn't ANY other source for reviews like this. NONE. ZERO. ZILCH. Not in magazines. Not on KZbin. The R/C world is very lucky to have you, Jason!

[@dagolf0616]

Perry Codes Agreed! Two thumbs up Mr. Snyder.

[@kadenlanham6315]

my screw stripped when driving it in to the dif box. idk why the dif box is having these problems. I wasn’t even using an electric driver

[@PerryCodes]

I'm always getting screwed when I drive it into the diff box... if you know what I mean ;)

[@kadenlanham6315]

@@PerryCodes lol, i ended up drilling it out and then using a traxxas screw that was similar looking. i think the plastic on the dif box is just drilled to tight. or the screws are not the right size screws

[@billbarberconstructioninc.17]

Haha that last jump when you landed on the panel van! Awesome

[@cracklesmccrakken6518]

I'm just about to take delivery of a very low hour one of these and I'm so pumped after watching your vid! Thanks so much for an excellent review! MAN YOU CAN DRIVE!!

[@CharlieFultonSC]

I just started watching this video and paused it to say.... Jason your t-shirt game is STRONG! 😀

[@maritimezombie7684]

7:38 The next version is around the corner TLR: 4 years later...

[@rhinusbreedt9772]

Lol 5 years later and still no SCT 4.0 great video! Im keen on getting a short course truck. Looking at the SC6.2 and SCT 3.0 as the associated is a newer truck and better supported in South africa.. it looks like im leaning a lot towards the AE. But still love the TLR's

[@PopalongRC]

Great vid man

[@AzMz6]

Great review. Agreed on allot of it. Personally I've been building all my kits lately by putting a little dab of black grease on the screws when I thread them in. It's saved me quite a bit of hassle.

[@jyrkilehto8502]

Hey Jason! You do sweet job with the reviews, thanks and keep going strong! Just built most of my 22 SCT 3.0 yesterday and I also noticed that the gearbox screws were WAY tighter to screw in compared to my approx 6 months old 22 3.0 buggy. I just did the conversion from 4-gear to 3 gear in my buggy about one week ago and in that one there was no issues. Maybe they have changed the mold. And also it would seem to be only one side of the gearbox, since screwing the rear bumper was easy to one side of the gearbox and tighter to the one which the motor plate screws in. Best to build them with black grease and hex drivers, no Makitas or Bosches...

[@derekthrone6726]

absolutely love your channel, appreciate the honesty and enthusioasim

[@rileyrika7947]

awesome review have been looking at this truck in the shop and waiting to hear what you had to say. so going to buy one now. smooth drive at the end too so consistent

[@bigboyz12000]

Always an honest review..appreciated.

[@alexr9030]

good video and really like the running footage at the end . This shows how nice the truck handles. I imagine you were wishing for a wilder motor in there .The 17.5 stock is nice but maybe a wilder stock class like 13.5 or 10.5 would be nicer if Not modified would be nice to see with this truck. Overall I would recommend this truck to people that like 2wd SC and it's the most up to date.

[@shawnlavigne9069]

That was a nice drive.👍

[@jmmustangs3078]

Great review as always and awesome shirt btw! I added sway bars to front and rear on my sons SCT 22 3.0.

[@fondfarewell2]

that thing turns amazing.

[@blackbirdrc8348]

Hey man I know this is an old video but I was wondering if I could get some insight. See the problem is, Is that I want a kit but i'm not a racer.... Don't want another slash .. Is this truck capable of bashing? Not skate park bashing, Just some jumps in the yard. Maybe in the dunes with paddles. Again not looking to bash it like my xmaxx or arrma kraton lol. I want a kit so bad!

[@ST-0056]

Hey Jason I'm a teenager and has to pay for pretty much all of my rc stuff and was wondering if you have around $100 what receiver and transmitter would you buy. Looking to be able to run 2-3 vehicles. Thanks

[@ShortCourseWorld]

coolcandy241 fly sky gt3c

[@MrViqtim]

whats the difference between this kit and the RTR kit? I'm new to RC so I don't really want to have to build my own but I want to get a truck for strictly racing. I have a Helion Avenge 10SC coming tomorrow I was thinking about trying to upgrade and race but in the end I don't know if it will ever be as good as a Losi or Team Associated as far as Ive been researching.

[@BUILTLIGHTWOUNDTIGHT]

Awesome review man!!! I love the Bronco, because there's nothing like running a bus against a bunch of ferraris ;)

[@adamperry6133]

I bought a scte 2.0 about 4 months ago and it had different color shock bodies.

[@gregberkhof2953]

this is the 2wd sc based on the 22 platform, the scte is a 4wd sc drive based off the 1/8 e-buggy platform.

[@adamperry6133]

I know that, but it still had the same problem.

[@John-gd1dc]

Thank you for the review, well done.

[@jeremiahbray2470]

finally!!!!!!! hhahaha great video man! just wish you did more short coirse as it is the only class i race at all. love my 22sct 2.0!!!

[@rcjunky2415]

Looks like a nice kit. It looks dialed when you are driving it. Great Video.

[@R1Kyle]

Tight screws or all screws use silicone oil prior to first install.

[@droors77]

Nice review! I had mismatched shocks from tekno and they told me to blow. It under the body yeah, but i work on my 400 truck too. So definitely should have better quality in finishes.

[@ericahearn9604]

Great shirt and review once again!

[@derekthrone6726]

hey big J so if you had to choose with money not being a consideration would you ride the 3.0 or the sc5m

[@chrisserino9757]

Hey Jason! Love the videos. Had a quick question but I’m not sure if there is a quick answer. Just bought the sct 3.0 and when I’m going over jumps the front end is flying very high compared to the rear end. Is there anything I can do to jump flatter? Thanks!

[@MrNascarfan1]

I found one built used for 75 is it worth it to race or would the new associated be way better

[@mtxrules]

Sweet truck! wish I had a track local to me. not really much R/C interest in my area. Hopefully someday. :-) great review

[@NikkiNexo777]

thanks for the video Jason. This truck looks like it drives and rotates very well. thanks for the review.

[@rcjoe406]

Whats a good 2wd kit for just bashing in normal terrain? Thanks

[@andrewwhite2863]

What would you have to change on the 22sct 3.0 to run on carpet?

[@Blackrunner19]

Thanks bro keep up the good work

[@kenhottinger3442]

My shocks we're also different colors, has also been a great truck. Didn't really care either.

[@Radical911]

What happened to the sound at around 12 minute mark ? went all mono.. thought my headphones broke. Cant believe you would do the close up with JC tires on.. Losing yer touch home skillet !! ;)

[@alexsims7786]

Great vid

[@marlonochoa3301]

really like the ford bronco body you were racing against

[@gravediggernz]

Marlon Ochoa wonder if it parachutes bad.nice driving

[@TheSpeedracer1982]

TLR SCT 3.0 or Associated RC10SC6.1 ??

[@tonywatson648]

Do you have the link to your facebook page? Also given the extra cost over the 2.0 (roughly $200 in Aus) do you think its worth it for an intermediate racer?

[@christiansinclair2941]

next time your at SDRC ask Travis if you can wheel his 3.0 it is so dialed

[@waynebutler9646]

hey jason love all your videos. Ive got a rc8 b3 team kit buggy and wanted to know if you wil please do a review on one thanks

[@ShortCourseWorld]

Wayne Butler i did one on the ebuggy

[@bigdaddyd82vapes92]

Jason, with video quality and content as good as this is worth the wait. Now, "Value" in my mind when it comes to this. I believe TLR really does give you the most in the box for 10th scale. Especially the 22 4.0 . You get essentially 2 cars for the price of 1. And nothing "needs" to be upgraded to go fast. I'm no fan boy but, it's my opinion that TLR 10th scale line up is a no brainer especially if you go from track to track. What say you?

[@cameronjonathan546]

Yeah bro I got the plastic shock towers and the bleed screw did that to me I think I over tightened it and it did that same thig

[@blackbeast666]

Would you be able to like back yard bash and trail bash this sc no crazy jumps just bash and race friends or is it strictly race?

[@Strckt]

You can do whatever you want, but its race spec. Sure you could bash it, but there might be cheaper options out there. The car is expensive, and you need to get all the electronics. A Team Associated prosc10 rtr is good, and will handle around the backyard. As well putting some money back in your pocket.

[@ethancline8321]

Good vid Jason👍🏼

[@murrijuana2842]

Great video

[@royarsey5429]

i like the tires, will work well for street bashing ..

[@messn03]

Jason..how many rigs U got dude???

[@RCJOE]

nice review 👌

[@lukebornemann9556]

what is the best kit to build for racing ?

[@rileybecker4909]

is that stock or mod you were racing at the end

[@ZacharyGalloway]

Who knows 22SCT 4.0 could be 8 months to a year out... Over 5 years later thinking about paying $379 for a "new" 22 SCT 3.0. Wonder if well ever see a 4.0?

[@erikthegoprofanatic4437]

@shortcourseworld Jason I have a question but I don't know how to contact u but. I would like to know an approximate when the super soft slicks are coming out bec I would like to run them at a big race and also at my local track

[@charlestreibley9904]

The Losi SCTe is like a cat!

[@Blackrunner19]

Hay bro what tires did u lik for the Desert classic

[@ShortCourseWorld]

julio najera I own Raw Speed. My fastest driver won expert 17.5 buggy on supersoft Stage Two's

[@paulz.6632]

what is the difference between the 2.0 and 3.0 ?

[@HankAaronJoseph19]

Paul Z. gull wing front arms, horizontal battery mounting, rear hubs carriers have the aluminum mount and I think it's mid motor only

[@shadow.4oh869]

Jason are you gonna do a review on the 22 4.0 when it comes out? Thinking about buying one of those instead of the b6d

[@mechanicmike2858]

Cool runnings.. lol

[@hotshoer916]

Please say its zero offset wheels

[@thebattleofpelennorfieldsp6081]

No problem

[@nbproductions7131]

i am 13 i have a brushless traxxas slash and i want to get into a littlebit of racing in buggys what one should i get i was looking at the B6d from team associated

[@nbproductions7131]

B64d

[@nathanbrown4140]

Nathan Brown B6d on my other channel

[@zachogdahl210]

Nathan Brown anythimg from losi or associated. id personally wait for the losi 4.0 kit

[@ddd228]

Get an old B-4. Cheap!

[@leo_kazantsev]

Main competitor of this truck is ASSO SC5M, which cames with excelent Proline body, it's far better and more durable than weak TLR stock body, so the value of laser precutted body is not top at class. Jason, i've seen your SC5M review, some portion of fair comparison would be helpful for those, who choose between. Thank you for review, longer runnings are defenetly better.

[@jackassdude2010]

Man, that truck with the wagon body is hideous.

[@PerryCodes]

Decals? Wha?

[@Peckerthesquirrel]

You look tired. You're working to hard boy

[@countryboyrc2871]

can I have it

[@brendand.2269]

who builds a 1/10 kit with a screw gun? hahahaha. duhhh

[@ShortCourseWorld]

Brendan X every pro I know of.