SHOT Show 2020: Buck Knives

[@LuisGonzalez-gl4wc]

I like the middle blade, 891, a lot.

[@innerbarkoutdoors]

They have a great lineup this year

[@LuisGonzalez-gl4wc]

InnerBark Outdoors yes, they do. Their folders are nice also.

[@orderusp6394]

@@innerbarkoutdoors painted turd line of knives.

[@rudymirelez7463]

Purchased these blades and they perform well. The Talon is amazing in the hand and the combat knife is a joy to use.

[@innerbarkoutdoors]

*thumbs up*

[@VashPlissken45]

That big chopper looks good! They must be trying to compete with TOPS more since they came out with several blades with a similar recurve blade.

[@innerbarkoutdoors]

*thumbs up*

[@LXT43]

It actually looks silly. There's no reason for 4 holes in the front of the handle. Tacticool. So are most Tops. At least tops are more original.

[@VashPlissken45]

dirtime well I agree that the lashing holes on such a large knife may not be necessary. You are wrong about TOPS though they are functional first & foremost. Cheers 🍻

[@davidmace3310]

Like the GCK. Would like to see a field knife version. More survival function first and combat second . It would have more belly on the upsweep like the gerber strong arm. Really good designs. Buck is definitely upping their game.

[@innerbarkoutdoors]

Over the past few years Buck has really stepped up

[@Gath8mm]

Wow, Buck finally got off their damn ass.

[@innerbarkoutdoors]

*thumbs up*

[@orderusp6394]

Painted turds ready for sale.

[@passivesolar6194]

Great to see Buck back in the fight. How Much? I have not seen those anywhere?

[@innerbarkoutdoors]

Should be on the site by now, if not ... then no one knows *shrugs* mystery..

[@eddyflo2978]

Amazon

[@demo2952]

I got the black one in spear point. Waiting for it in the mail. Does the black one have g-10 or canvas micarta?

[@innerbarkoutdoors]

I think they are all G-10

[@jocemarine6247]

G-10

[@knifeman1122]

Those are beautiful. Good job buck

[@innerbarkoutdoors]

*thumbs up*

[@SamuelBarrPhotography]

Are these still available for sale? Looks like they've been discontinued.

[@innerbarkoutdoors]

Not sure :/

[@trussmonkey5910]

Limited run and discontinued by Buck. Sad as these were turning heads.

[@papagarand6592]

Why was the GCK line discontinued?

[@innerbarkoutdoors]

:(

[@nicholasmyers5488]

Is this knife out yet or will it take a while I also saw on the buck website a article about these blades

[@innerbarkoutdoors]

Later in 202 brother!

[@chunyangwang622]

I have an older version of the 808. It looks like they removed the limbing hook on the top of the knife. I can personally attest that the 808 is stupid sharp.

[@innerbarkoutdoors]

Nice!

[@jtpiercy1966]

What was the price on the 893 ground combat ?

[@innerbarkoutdoors]

TBD - didn't get that info there, sorry man.

[@thefinn-isher9116]

There 100 dollars on blade hq

[@lesgrossman4636]

Cabelas has ‘em for 150cdn

[@richardangus2668]

Just got the tanto it's awsome

[@innerbarkoutdoors]

Awesome!

[@combatmedic6997]

I ♥️ Buck knife:)

[@innerbarkoutdoors]

*thumbs up*

[@Juniorsee2840]

893 gck I like that one but I try to find this on there site and I couldn’t find it

[@innerbarkoutdoors]

Just keep checking the site, I'm not sure sorry brother.

[@ShooterMedic1818]

Great job Buck!

[@innerbarkoutdoors]

*thumbs up*

[@neddmoulton1]

Middle blade is nice and that top blade would be one I would buy but I will not buy serrated blades. I don't get it with serrations. They are hard to deal with when needing sharpening. Straight edge is so much easier and convenient.

[@innerbarkoutdoors]

*thumbs up*

[@johnmutton799]

Cannot find these knives in UK

[@innerbarkoutdoors]

:(

[@turtlewolfpack6061]

Nice! Serrations still suck but I understand why they put them on the big one, which otherwise looks pretty sweet. Especially like the tanto!

[@innerbarkoutdoors]

They might do different blade edge options. The market will speak and at the end of the day, a straight edge is one less step for them.

[@woltews]

the thing is most people in the military that actually use knives extensively in combat tend to have rather limited budgets that these knives would sort of not be possible under , think like $20-50 range max ( also stuff gets lost, stolen or left behind a lot )

[@innerbarkoutdoors]

Good ole Ka-Bar comes to mind

[@woltews]

@@innerbarkoutdoors ok so if I can spend $50 on 3 knives over a year what dos kb- bar have for me ?

[@GatlinMcDoubleStack]

Like the Cold Steel SRK. Good knife and only runs about $30-$40. The Navy issues them during BUDS for field/divers knifes. They hold up too, made of SK5 steel. That’s where the SOG Seal Pup design came from.

[@claypoole702]

Will this be another product line that the base public can not purchase? It is a damn shame when they curb sales for "professionals" only.

[@jamesmurray6348]

I agree they shouldn't even show it if we can't get it

[@claypoole702]

@@jamesmurray6348 Let me amend my comment. The tactical line, or the three that were shown, are on sale at Knifecenter..com That was a quick glance. So I am eager to check out the 5150 stock that Buck uses.

[@innerbarkoutdoors]

They didn't indicate any restrictions on the sale of these models.

[@eddyflo2978]

The talon is my main edc

[@innerbarkoutdoors]

*thumbs up* good choice too

[@The4cp]

Looking really good.

[@innerbarkoutdoors]

Right?

[@ungratefulpeasant8085]

Looks like buck missed the bar again. Being able to slash and stab to meet the unique situation is important. The chopper could have been an excellent outdoor tool without the massively cheesy saw back and sarations near the grip. It would have been beater with a wider grind for chopping and a couple inches of fine edge towards the grip for precision notching and carving.

[@anthonyisdead]

i was looking for this comment lol, totally agree! the serrations ruined it for me.

[@innerbarkoutdoors]

Good point *thumbs up*

[@vites8925]

No Buck is more beautiful than the mod. 120.

[@innerbarkoutdoors]

*thumbs up*

[@windchill8013]

You should check out the frontiersman if you are not familiar with it I love it 👍

[@davidwarren719]

I really wish designers would stop adding saw teeth to otherwise decent blade designs

[@innerbarkoutdoors]

To each their own, some offer the option without teeth.

[@michaelsubi]

Those teeth come in handy for notching and such

[@Grumps2_4]

Don't look on Buck website for them because they aren't there

[@innerbarkoutdoors]

State of the world has put things on hold, check back later in 2020

[@gammonsandwich1756]

That's some neck knife!

[@innerbarkoutdoors]

*thumbs up*

[@Wildwestwrangler]

Grip points for battonning?!!!

[@innerbarkoutdoors]

*thumbs up*

[@pipedreams57]

Good to see some different steel. That 420 stuff is junk. D2 works for me best.

[@innerbarkoutdoors]

*thumbs up*

[@-mylittleburger-]

I actually find their 420 hc steel on the folders to be actually pretty good (is hard enough to keep a decent edge, and can be sharpened easily enough). Granted, something better for their larger knives is a plus.

[@IratusJackalope]

like em

[@innerbarkoutdoors]

like em uh-lot

[@luckylarry5112]

Get rid of the serrations and peeps would be all over it...

[@innerbarkoutdoors]

*thumbs up*

[@williamstacey1464]

LOL

[@innerbarkoutdoors]

*thumbs up*

[@invictarose203]

The sheath is bulky and overall just sucks, the "grip points" are more narrow for batoning, they actually offer less surface area if anything. And the blade steel isn't that great. Id probably prefer my strong arm over them, yet I still want the tan tanto version.... i guess we'll see how it works

[@Chivalrous420]

you like 420HC over 5160? why?

[@squiggy9606]

5160 is one of the toughest steels around and has comparable edge retention to 420hc. Check out this link for a great comparison of the properties of commonly used knife steels. knifesteelnerds.com/2020/06/15/what-is-the-best-budget-knife-steel/

[@innerbarkoutdoors]

Perhaps there are some reviews to see it in action!

[@B51608]

the sheath of the "combat" model takes up too much space and weight. bad design, sorry.

[@innerbarkoutdoors]

To each their own, I see what your saying.

[@Dafoodmaster]

i mean, you should be able to remove the nylon-like part pretty easily i think, leaving a pretty light weight kydex type deal