SHUENK N55+ TURBO INSTALL PART1- Removing the stock BMW N55 PWG turbo on my F10 535i

In this Part 1, I show you the steps I took to remove the original PWG turbo on my BMW F10 N55. And I compare it to the new Shuenk N55+ that will replace it.
Shuenk N55+ Pneumatic Wastegate
shuenk.com/N55-Upgrade-Turbo-...
Bimmerhaus Intake
bimmerhausperformance.co/prod...
Chapters:
0:00 Intro
0:06 Details
0:33 Setting up
1:11 Accessing the turbo
7:19 Status Report
8:15 Accessing the turbo (continued)
10:21 Removing the turbo
11:25 BMW and Shuenk N55+ Turbos side by side
14:16 Conclusion

[@FiefysLashes]

So good man!! Love it! Great vid! Great inspiration for Dougs new turbos 👊🏻

[@turbospool]

They are certainly worth it! Thanks!

[@JohnsonMotorsports]

Awesome video. Detailed DIY! Can’t wait to see this in action.

[@turbospool]

Same here bro! Almost there!

[@turbospool]

btw, thanks for the blue gloves! Im still getting use out of them! lol

[@Tony-jv5pr]

Hey would have been nice to see it all, I did learn something watching it. thanks

[@turbospool]

This is just Part 1. There very next video released was Part 2 :-). Go check it out to see it finished and running

[@bopan3929]

Dude you are really good. I also have the same 535i .

[@turbospool]

Thank you! Just wanting to help others!

[@reginald8405]

Excellent Brother, good video! I install my on turbo, super rewarding.

[@turbospool]

yes it is very rewarding! Thank you!

[@justinp2993]

First video for me, not bad. Definitely in for the 2nd part and the driving impressions. One tip, pull the music back a bit, can't hardly hear what you are saying especially at the end.

[@turbospool]

Noted and thanks! Was hoping it wasnt that loud. Im not a fan of blaring music on videos so thank you!

[@Jet3ch]

Solid work

[@turbospool]

Thank you!

[@RealPStakks]

🔥🔥

[@user-ti3zl8zw1o]

Great video, yea I just pulled the engine out more room to play with 😂

[@turbospool]

Oh absolutely! Lol

[@dappa311]

Great video, lots of damm work! I have a 2012 x6 with the N55 engine, I am dreading the day I have to change the turbo when or if it fails. But I was wondering, wouldn't it have been a lot easier to drop the subframe and you would of had a lot more access to work on getting the turbo off and new one back in?

[@turbospool]

Oh absolutely it would have been easier to drop the subframe! lol you are correct. I just did not have a crossbar to do that, and most BMW techs don't drop the subframe because although it makes turbo removal easier, it also adds more time to how long the car is in the stall (which since most work on flag hours, this would cost them money). So I sucked it up and did it this way. Which honestly would not have been so bad if I could go higher off the floor and had the "questionable support jack" placed properly under the engine, lol

[@dappa311]

@@turbospool , did what ya had to do, got the job done and thats all that matters. last question, where do you find the torque specs for the turbo manifold bolt and associated bolts for teh cooler and oil lines? Did you prime the engine after you were done and how long did it take you to get the trubo out and new one in?

[@turbospool]

@@dappa311 i got the specs from my friends at the dealer. You can also find them online if you have access to BMW TIS from what I understand. Engine was primed upon completion, prior to first start. 1 long crank, 2 short cranks. Can’t really say how long it took me as I broke it up over 2 weekends and a few hrs here and there after work. Plus I was filming! That alone adds like 30%-50% more time to ANY project lol

[@DJ-lc1en]

Nice video! Just wondering if your car is a xdrive? Or rwd?

[@turbospool]

Thanks DJ! It’s RWD

[@carlosmontes384]

Nice! For drag race which would you reccomend the f55 turbo or the ps750? Thanks btw

[@turbospool]

too early to tell! There's many dynos of the PS750 already. But only a handful of the F55 (even less that are finished tuning). But from what has been found on the F55 so far is that it has more "room for growth" than the PS750. Just based on similar dynos the F55's wastegate is in the 70-80% area whereas the PS750 is maxed out at 100%. Just on that detail I would say the F55.

[@richcortez2251]

Sid u get a custom tune for the turbo ? Im Running MHD stage 2 + e30 just checking if that is enough for that turbo ?

[@turbospool]

Hey Rich? You absolutely want to have a custom tuner ready to go for when you go drive the car. It will start and idle no problem. But driving around it will be EXTREMELY easy to spool when the DME isn’t expecting it due to the design of the wastegate. So you want to get setup with David Shoup, Wedge, or Keahi Harris prior to install so you can at least have a base map that will allow you to drive it around safely while you tune it. This is not for the OTS tunes

[@davewallace9048]

Why didn’t lift the engine from the top with the harbor freight engine support?

[@turbospool]

Lol! I mentioned it in the Part 2 video. Next time I need to raise the engine I will use the engine brace from the top instead of this questionable method. I have one now lol

[@Tony-jv5pr]

Wondering how you lift the engine with all the wheels still installed. First time doing the job and looks like theres extra information missing I need to know.

[@turbospool]

I mentioned that you have to support the engine, then unbolt the motor mounts (3 10mm bolts each), disconnect the charge pipe and boost pipe, and you can start lifting carefully

[@Tony-jv5pr]

@@turbospool Ok I see, I thought it was just the top bolt that needs to be unscrewed not the whole engine mount. I thought it was only 1 screw on each side on the top where the support brackets to hold the engine. So, I need to also remove the 3 bolts on both engine mounts as well? thanks

[@ay-ay-ron4071]

Is this the xdrive? If not would it be a similar install process?

[@turbospool]

No, my car is RWD. I’ve not messed with an Xdrive N55 yet so I cant say how and if it’s any different in this particular project. That would be a great question to post up on the Facebook N55 owners group

[@bonestockn55]

Brother do you believe this can make the same power as a PS2?

[@turbospool]

Check Shuenk’s site. I believe this turbo is rated for just below what the PS2 can flow at max. It spools earlier than the PS2 though due to the proper manifold design without the restrictive neck at the turbo inlet that the PS2 has

[@eskania]

Can I install the Shuenk exhaust mainfold on the stock turbo.

[@turbospool]

A big part of the upgrade is the less restrictive manifold. But you could I guess if you know how to weld. The manifold is one piece with the turbine housing (both on the stock and in the N55+). So you’d have to buy it, cut both turbines off the manifolds, then weld the upgraded turbine on to your stocker. Shuenk BACK IN THE DAY used to do “super cores”, which you could bolt into the stock turbine housing. But I’m not sure if they still make it since the N55+ came out. You’d have to check their site

[@AlexHernandez-xh8ei]

Would this be a similar process on a 640i 2015

[@turbospool]

It should be! ALMOST identical underpinnings between the 5/6/7 F-chassis

[@bigdaddy5285]

How’s the turbo holding up? Any dynos?

[@turbospool]

Turbo is doing phenomenal! No dyno yet. Changed my fueling setup a third time, so tuning once again has to start from scratch lol. But the turbo is excellent

[@bonestockn55]

Does this turbo make more power than a pure stage 1?

[@turbospool]

It is rated for more than the old PS1. Go to Shuenk’s site for more info or email the owner Doug. He’s very easy to work with

[@jacksoncorp124]

How high are you boosting the motor?

[@turbospool]

Kind of difficult to answer that. Im going as high as my current fuel setup will feed RELIABLY- wherever that ends up. Then in the near future if I want I will do meth injection. Not going for all out insane build lol. It’s a daily driver with an open rear differential. BUT… Ill be happy to break 500 wheel horse power on this daily driver lol!

[@TheIrfanxz44]

Anybody can help me to locate a clamp that holds the two pieces of turbo together somehow all mine fell off and I can’t find one at the dealer

[@turbospool]

Your best bet is probably going on the N55 Facebook group and asking for it there. Im sure a few have a blown turbo they haven’t thrown out yet. That would be the best case scenario

[@oriolinton]

how are you gonna show off those calipers and not let us know how we can get our hands on something similar... They were sweet brother... They dont look like covers if they are!

[@turbospool]

Haha thank Onigma! Go into my main channel page and check out my videos. I actually had to break up that front caliper upgrade into 3 parts. But they are factory BMW Brembos off a BMW G12 :-)

[@beamer2169]

How much hp does that turbo add

[@turbospool]

Rated for about 500 whp. But people have already gone well above that. I just finished 91oct tuning so in about a month I will go dyno this on 91 octane and see what it does there before going all out on E85

[@beamer2169]

@@turbospool nice about how long did it take you to install from start to finish

[@turbospool]

@@beamer2169 couldnt really tell you since filming and finding the best angles and lighting takes up so much time. If i had to do it again I can definitely do it until 8 hrs going at a steady pace with beer breaks. This first time without filming maybe took me 12hrs

[@bonestockn55]

@@turbospoolwhat did you get on the dyno for your 91oct setup? Also what performance mods do you have?

[@turbospool]

@@bonestockn55 here is the 91 oct dyno video I HAD TO TOW MY CAR OFF THE DYNO- BMW 535I FAILED ON THE DYNO kzbin.info/www/bejne/hXXHl2SDZb55pZY , and here is the mod list video ALL MODIFICATIONS on my BMW F10 in Exactly 10 Minutes!! kzbin.info/www/bejne/Y6jchGClqtOXqZY