SIG MCX/MPX CO2 Conversion to HPA/PCP

[@clark3830]

You must crank the adapter down very hard or it will leak.

[@a64738]

I think using a paintball remote line with quick connect and air tank you wear on body is a better solution, then you can keep using the original stock.

[@muntee33]

Rondo Cat Change the whole balance. A lot.

[@a64738]

@@muntee33 I did it on mine and I do not feel the difference in balance. It is no problem putting more weight in the stock if needed anyway...

[@RudyVasquez-cn6ze]

Question! If the hpa tank is left tightened and attached to a converted pellet rifle (umerex fusion 2) will it leak air over night?

[@mAKtre47]

But can you store it with the bottle on?

[@peacefulscrimp5183]

Great video 👍

[@simonnoble7589]

HI, great kit for sig mcx , does fitting air tank give the sig more power and increase fps ? thank you ... Simon from ENGLAND

[@airgunballistics1779]

Strangely from what ive seen .. It decreases it

[@simonnoble7589]

@@airgunballistics1779 ow dear, never mind. It looks good with tank and butt stock. It's cheaper to run, and lots more shots... Thank you

[@airgunballistics1779]

@@simonnoble7589 did you buy the kit?

[@simonnoble7589]

@@airgunballistics1779 yes i bought the kit. Cost £85 from best fitting. Fast delivery 👍 easy to fit. Works a dream

[@simonnoble7589]

@@airgunballistics1779 hi , i bought kit from BEST fittings www.best-fittings.co.uk ....... cost £ 85

[@rick31869]

i wish we could get his to sj=hoot at least 800 fps ,soes the high pressure air add fps ?

[@senatorjosephmccarthy2720]

RG Airgun Ninja, they would be very useful guns if so. Maybe need only valve and air passage mods.

[@airgundepot]

Note that this will void the warranty, and long-term use may damage the seals. Here's the link to the adapter: www.airgundepot.com/air-venturi-co2-bulk-fill-adapter.html

[@DrWho-jy7lo]

Unless there is empirical data to support that using HPA in the "long-term" may (or may not) damage the seals, this "argument" is purely academic.

[@everett86]

In the link you provided it says it does NOT void the warranty

[@jonathanfaust7893]

Question if I convert my mcx from co2 to hpa Am i going to lose fps.what would be the best set up to get the most fps out of my sig mcx

[@Thumperwrestler]

does all the air come out when you pull the air venturi tank out?

[@airgunballistics1779]

Doesn't this lower the fps.. I saw a chrono demo where it seemed to decrease..

[@jerry123456789101112]

Again. HOW DO YOU FILL IT??? No video shows how to fill the tank. And how can a foot pump push out 3000 psi.?

[@airgundepot]

To fill an HPA tank you need either a special hand pump, compressor, or SCUBA/SCBA tank that can handle those extreme pressures. This pump: www.airgundepot.com/air-venturi-g7s-hand-pump.html or this compressor would be good options: www.airgundepot.com/air-venturi-nomad-2-portable-compressor.html

[@allenjohnson4462]

Any paintball place can fill them for a couple bucks.

[@allenjohnson4462]

I have a hand pump. I don't understand how it works tho. But it does

[@jayrock1470]

can I keep the HPA bottle on their unlike a CO2 bottle will I lose pressure with a HPa bottle if left on for long periods of time

[@Not_Evil_]

Will it be more powerful thank to converting it ?

[@laopaolao2008]

So much work

[@Fubar684]

Can I buy the Air Venturi tank adapter and butt stock separately? I've already got a Ninja tank that size.

[@airgundepot]

Due to new KZbin regulations, we can't post links but if you go to our site and search Air Venturi Buttstock, and Air Venturi CO2 Adapter, you will find the items you need.

[@patriciam4123]

Are these new versions of mc x mpx? Is this safe to use on a well taken care of but older gun? Plus nowhere in your site does it say these are duel fuel.....gauntlet either but that one doesn't worry me. Still , I appreciate airgunDepot providing other more economical options. Thanks for sharing.

[@patriciam4123]

P.s. I would call manufacturer and ask if making these changes may void any warranty you may have. Better safe than sorry.

[@airgundepot]

They haven't changed. And no, it won't void the warranty.

[@hpiproceed97pcp20]

Does this give more power ?

[@mrpndaman129]

Yes

[@Mike_E_DeShaman]

So its full of air and nothing is happening.. do i need to do something to let the air in

[@kobepimpin]

Firing pin came out same problem happened where I wasted two co2 because my gun simply was not shooting air

[@roguestudios2189]

Do these also come in 22 cal

[@joshschroeder5863]

Is this a kit on your website or do I have to purchase everything separately? I don't even see the buttstock.

[@airgundepot]

Right now we are out of the butt stock which makes us out of the kit also: www.airgundepot.com/air-venturi-13-cu-in-hpa-tank-stock-adapter-combo.html So right now you would need to buy the parts separately. Sorry for the inconvenience.

[@monkey0550ify]

Is this set up similar as a paintball marker? If so can I run my h.p. tank with remote so that way the tank would be on my person

[@airgundepot]

Yes, that would work.

[@muntee33]

Do they sell these at Bunnings?

[@kennethwilks4005]

Can the tac butstock fit this tank ?

[@dariocastrocontreras6766]

Como se lo puede octener y cual es el precio.

[@denairhard7402]

What you should have mentioned is that it won't do the same FPS as with CO2. Velocity will be lower if you "convert" it just by screwing HPA tank without replacing some of the rifle inner parts.

[@Robbie770]

Don’t do what he is doing overtighting will crack the neck it’s weak alloy once you’ve cracked it your shooters fucked

[@ninjaarcades7356]

Yes very good spot

[@bambiloren]

mine didn't fire.

[@joegardner1528]

Very niiiiice!

[@donaldrush1364]

I just bought this gun and then saw all the crappy reviews. Hope it's not a huge waste of money.

[@mr.octopus6972]

Is there any way to do the same with a DPMS ?

[@TheRiddimselecta]

May be, but the DPMS has the co2 in the magazine housing. Remote line may be?

[@benjamingracia4919]

Do they make a 2 12 gram conversion

[@BaKannizzoid]

Yes. Sold on eBay

[@maxsea2387]

hi, what is max safe psi for output ? 1500 is ok or little bit less like 1200 ?

[@danshearer2520]

I believe 1100

[@lilsleak]

@@danshearer2520 you can adjust the psi with these?

[@harrycolby2302]

That air bottle next to my head ain't makin' it with me.... I prefer a failure to blow off my fingers than my head... If I have my head I can still compete....

[@DrWho-jy7lo]

The air bottle in this video is rated at 3,000 psi and has a gauge so you know when to stop filling it; I doubt a random explosion would occur.

[@a64738]

I think using a paintball remote line with quick connect and air tank you wear on body is a better solution, then you can keep using the original stock...

[@Albert41122]

Can it be tuned up to shoot ca 230m/s ???

[@airgundepot]

As far as we're aware, there isn't any way to adjust the power. You could increase the regulator pressure on the tank, but the gun isn't designed to stand higher pressures and it will probably fail.

[@Albert41122]

Very dissapointing info :/