How To Do Your Print and Cut Alignment || Mimaki CJV150/300

In this video I will give you a run through on how to do your Print and Cut adjustment procedure on your Mimaki CJV150 and CJV300 Print and Cut machine.
I am demonstrating on a CJV150 75 but it is the same procedure for the wider machines and also the same for the CJV300 series, you just have another print head and cap to clean!
If you need to purchase any of the consumables used in this video head over to the Signmaster Online Shop to place your order:
www.signmaster...

[@King_stunnar]

i own a cjv150-130 machine. the propblem with these machines that i am experiencing is that you can do the print and cut PC Origin Alignment or TP alighnment and it will most probably work fine when cutting 1 or 2 stickers nut the munite you cutting 100 x 90mm round or square stickers they will cut way out of alignment no matter how many times you perform the alignment adjustments even if your media is loaded correctly.

[@pedrok76]

im also having this problem. did you find a way to fix it?

[@hollyzeng-shenzhenqunxinel395]

Hi,Do you need mimaki chips? we are specialized in selling printer chips in China,and we also selling single pass printer and UV printer,pls contact me if you are interested in it

[@qhj2]

Also looking for answers

[@SignmasterTechnical]

Have you tried using reg marks on your print and cut work as this always give a more accurate cut than without. Also check your pincher roller settings on your printer to make sure these are set correctly

[@alinucalinuc4124]

HI. I'm having the same issues as the guys that commented above. I just can't seem to solve the cut alignment problem, no matter how much I perform the protocol shown in this video. @@SignmasterTechnical

[@ginod2279]

Does this need to be done each time before cutting after laminating?

[@SignmasterTechnical]

Hi there, no only when you notice your cuts being off consistently

[@ginod2279]

Thank you@@SignmasterTechnical

[@OffTheTrailEasyMeals]

Hello! I am trying to decide between a Roland BN-20A and a Mimaki CJY150-75. Do you have an opinion on the comparison? Or experience with either of them… or both?

[@SignmasterTechnical]

Both are good machines, the BN is smaller, a little slower and more suited to beginners or crafters

[@OffTheTrailEasyMeals]

I am just beginning with a printer cutter, but I have been working on a plotter for almost 2 years now. I just only want to buy once! Ya know? But I want to prepare for the future too🤔

[@SignmasterTechnical]

There is a new Roland BN2-20 that has just been released, it is worth a look as it is 4 times faster than the original BN with a lot more features

[@OffTheTrailEasyMeals]

@@SignmasterTechnical thank you! That is actually what I ended up getting and I LOVE it!!! Thank you! Great minds think alike!

[@alphagraphicsrichardson5565]

Hi the cut button is not highlighted. Its greyed out and not clickable. UCJV300/150. Any help is appreciated

[@SignmasterTechnical]

Hello, if you are referring to the cut edit tab that you can find the alignment in Rasterlink you have to select a job that has a cut line on it to be able to run the print and cut alignment.

[@ml9633]

Someone should do follow-up on Question answering...

[@SignmasterTechnical]

Somebody does you just didn't ask a question

[@magdinabi7942]

Hi, i couldn't make CJV150 to print remotely, followed your video when i pressed FUNC3 it stays green with remote word so is there anyway to make it functional to print from my desktop ?

[@SignmasterTechnical]

The Mimaki machines need to be in remote mode to receive print data from the RIP software

[@ginod2279]

How do you increase the box and text size for the programme displayed? mine is displayed super tiny

[@SignmasterTechnical]

Sorry i'm not sure what you mean could you provide more detail on the issue

[@ginod2279]

The wording in rasterlink 6 programme is V small

[@SignmasterTechnical]

My version seems to be ok and I cant seem to find anywhere in the program to increase this, you can increase the job thumbnail size using the slider bar near the job list or if overall it is small try changing your monitor resolution settings.

[@Waleed_brd]

Help!!! I do tge origin adjust thing, but after the print and cut operation is done and i press adjust on the tp it doesn’t give me the x and y values it gives me four options of different dpi wp3 options

[@SignmasterTechnical]

Keep it in remote and choose the PC Origin Offset option

[@theilluminatigospel9421]

Great video. Do you provide training on these machines?

[@SignmasterTechnical]

Yes we do

[@bradg3650]

Where did you get your ink from?

[@SignmasterTechnical]

We sell the inks here at Signmaster

[@rejowanrashed7975]

How to stop auto cut off from my media after printing?

[@dakotamurray4247]

I assume you solved this but it’s in rasterlink

[@ericseaman9929]

This is just on step to the print and alignment setup. There is much more.

[@SignmasterTechnical]

This should be enough to bring your stray cuts back into line. There is more you can do but this should be enough to make a change

[@alinucalinuc4124]

Unfortunately, it is not enough!@@SignmasterTechnical

[@rajamurugan8042]

System hald (1) error plx

[@SignmasterTechnical]

Contact your printer supplier

[@chukwuebukakingsley7024]

Thank you sir for the video, please can i get your WhatsApp number for more technical assistance

[@SignmasterTechnical]

Unfortunately not, please visit our website to log a technical case