SilencerCo Omega 300

Shown in this video:
Silencerco Omega 300 suppressor (SU2281)
Mounts:
Dead Air Key-Mo Mount (DA428)
Silencerco Bravo 5/8" x 24 Direct Thread Mount (AC669)
End caps:
Silencerco Bravo .30 Cal Anchor Brake (AC2022)
Silencerco Bravo .30 Cal Front Cap (AC1340)
And also the Bravo spanner tool & multi tool.
Everything listed above came with the suppressor, except the front cap, which I bought from the Silencerco store, and the Dead Air mount, which I picked up from a friend. It also came with the Silencerco ASR mount and one ASR muzzle brake. I sold both of those to switch over to the Dead Air mount & brakes.
Made this for a friend who's looking to get his first suppressor. Told him to check out the Dead Air Sandman lineup also.

[@abesview5855]

Just got mine took 4 days! Also got the deadair mount. Mines the 36m love Silencer Co.

[@jreaglefan1990]

Awesome! Sure do love the short wait times these days!! I've heard good things about the 36M. Enjoy it!

[@abesview5855]

@@jreaglefan1990 Thank you!

[@Novak75b]

This was an excellent quick rundown. Thank you.

[@jreaglefan1990]

Glad you enjoyed it!

[@christopherpeterraby]

I just got mine took 6 months

[@jreaglefan1990]

Awesome!

[@gregoryclifton3793]

Which keymo mount. The ‘S’ or the hub adapter. I like this mounting option better than the Silencer Co one.

[@jreaglefan1990]

This is a hub compatible mount. I believe the specific model number is DA428

[@jreaglefan1990]

It has the 1.375" x 24 thread pattern, which is the standard Hub pattern.

[@DaddyPhatSaks]

Mine is in atf jail at them moment. Considering the endcap. Any difference you noticed other than making it shorter? I figured it may make it a tad bit quieter?

[@jreaglefan1990]

I think length is really the only benefit. Can't say it noticably affected the decibels, at least as the shooter. But it could be quieter for the people around you, since the brake endcap redirects the gas to the sides. But I can't say I noticed it. If you're using it on a .223, you may benefit from using the endcap made for .223, it has a tighter exit hole, so that would keep gases in just a tiny bit longer. But I only have the .30 cal endcap myself.

[@DaddyPhatSaks]

@@jreaglefan1990 sweet, thx

[@georgewilliams2619]

Would you make a parts list? I like this setup.

[@jreaglefan1990]

I just added the names and SKUs to the description of the video!

[@tonggi]

What is the overall length and weight with the Keymo and the endcap in the start of the video?

[@jreaglefan1990]

It's a little dirty so it might weigh a bit more than new, but: 17.3 oz. with keymo and flat end cap 17.4 oz. with keymo and titanium muzzle brake end cap 14.7 oz. with direct thread mount and flat end cap 14.8 oz. with direct thread mount and titanium muzzle brake. Hmmm, I thought the steel end cap weighed more than the titanium muzzle brake, but they are virtually the same. Assuming this scale is accurate. Lol

[@tonggi]

@@jreaglefan1990 keymo is a porker for sure. I Was thinking of taking advantage of their BOGO but their velos is never in stock. I went with a Polonium K instead but thanks for all the info. You can never really tell in videos how long suppressors are!

[@jreaglefan1990]

Hey I realized I never answered your question about the length! With the Keymo mount and flat cap, it's just a hair under 7 3/8 inches long. I don't know anything about the Polonium, but I'm sure it's good!

[@SchiZ03]

any baffle strikes with the keymo mount?

[@jreaglefan1990]

None yet! It's been flawless so far.

[@SchiZ03]

@@jreaglefan1990 love to hear it. whats your ammo that you run?

[@jreaglefan1990]

@@SchiZ03 for supersonic, I like Magtech 123 grain, and for subs Sellier & Belliot 200 grain. Just because those are cheap 😆 or at least they were, I haven't bought any 300blk ammo in a while. For the .308, i like Federal Gold Medal Match 175 gr.

[@SchiZ03]

@@jreaglefan1990 any advise on quiet ammo?

[@jreaglefan1990]

@@SchiZ03 well with a suppressor, any 300blk ammo will be stupid quiet. Anything 200 gr or more. I like the S&B 200 gr and the Federal 220 gr.

[@lemarcwhetstone6354]

Why do you say the silencerco quick detach system isn't too good? I haven't shot mine yet

[@jreaglefan1990]

What I've heard is that the locking collar can get carbon locked and near impossible to move to the unlocked position. Also, some guys apparently are cross threading the can onto the mount, causing misalignment and then baffle strikes. All of this could be chalked up to user error though. I have very little experience with the ASR mount, I just heard people preferred the Dead Air and went that route. But many people are perfectly happy with the ASR too!

[@sharedpollard4407]

Darn i saw this 60 minutes too late. I went the cheap ASR single port muzzle brake route.

[@jreaglefan1990]

No worries, that's still a solid setup. Only concern I've really heard if you shoot a whole lot without ever taking the suppressor off, when you do go to take it off the mount can get carbon locked and be difficult to remove. I think they updated the design in recent years though.

[@roguespriest]

mines in jail 218 days now... cant wait

[@jreaglefan1990]

Very cool, hope they release it soon! Times are all over the place right now. Mine took exactly 7 months from them cashing the check to it being approved, but that was in 2018.

[@roguespriest]

@@jreaglefan1990 it sucks they treat us like children i sent a letter to the state rep hoping that if i cry loud enough they will notice me LOL

[@jreaglefan1990]

@@roguespriest that sure would be nice! But don't hold your breath! 😂😂

[@roguespriest]

@@jreaglefan1990 also is the first round pop from sub sonic 300 blk out of this can very noticeable? can seem to really find much info on that anyway

[@jreaglefan1990]

​@roguespriest it's not bad at all. With this can, I can't say I've noticed much of the first round being louder on any cartridge I've shot through it. I'm thinking that's more of a rimfire thing, I for sure have noticed a first round pop shooting .22lr through my Quietbore can.