Hey Shaun. I have designed a 3d printed enclosure to attach this make to a CSW 2.5. It may work with a CSL elite as well. Would it be okay to post a thingiverse link in the comments?
@mokacat15953 жыл бұрын
can this be used for a real car?
@GaryVapes4 жыл бұрын
Can you have too of these working on the same SimHub but doing different things? I was thinking of making one for the revs at the bottom of my screen and one on the top for the flags etc.
@oddjobs55164 жыл бұрын
This was really a fun little project. FYI , I needed to update my version of SimHub to get it to recognize the nano - but after that , no problems. Thanks, Shaun. I love DIY stuff.
@8andersonpatrick33 жыл бұрын
What’s the max amount of lights that could be run??? Could I run an entire 3ft strip with the nano??
@JH09SUMIT Жыл бұрын
No.. The pin on the board will burn. Even I'm not sure the maximum amount. I'd suggest you to power the LEDs from a 5v USB port.
@olexandromelyan5564 жыл бұрын
Alerady using it about 3 years. And realy happy. Please notice, guys. You can add right here GEAR display!!! This is my favorite thing ;)
@mustanglikeme4 жыл бұрын
Thank you for this, I've been watching you since the ISR days, keep up the good work
@eliamaya71634 жыл бұрын
@the simpit will this work on a real car?
@jeffrose82792 жыл бұрын
Just so you know, SOLDER is pronounced Solder, not sodder. There is an "L" in solder. It is not silent "L"... it is pronounced as it is spelt. Why do you Americans call it sodder. Sodder is someone who works with soils. A sod is a clump of soil/dirt etcetera. Why do you folk persist in mis- pronouncing SOLDER. It rather make you folks out to be Kentukyens. It is pronounced SOL as in "soul" and add the DER as in "der" or "duh". :-)
@tonyhuffman52484 жыл бұрын
I'm trying to get me RPM Gauge to work I have went step by step and it will not show the port needed it only shows Com 1 what am I doing wrong? it does try to load 10 Times the it failed
@velocitybraker9914 жыл бұрын
Same issue as Tony here Shaun - any ideas for a fix?
@velocitybraker9914 жыл бұрын
Tony, I updated my Com Port drivers with the help of a KZbin video search and mine is now working.
@tonyhuffman52484 жыл бұрын
@@velocitybraker991 got it to work after downloading the drivers and i had to use the new not the old thank you so much i love it
@d.kuna198311 ай бұрын
Hi, is there any way to do button box with rpm gauge with 1 aurdino? I want to convert one of my rims to usb
@sup3rNico2 жыл бұрын
I do not understand Arduinos too much. Isn't there a way to make this rpm bar analog?
@derekmccord37984 жыл бұрын
What gauge is the wire? 22 or 18g?
@johnbag19793 жыл бұрын
Hi when i connect the USB arduino i do not have com port 3 ? please help
@diyer11903 жыл бұрын
then USB connect with PC,need to install driver on PC?
@ericcline91464 жыл бұрын
Thank you for this can't wait for more DIY projects..prob my favorite part of sim racing I have made my t3pa pros hydraulic with a pressure sensor..mainly use vr but thinking of going to triples and stuff like this is great for people on a budget
@meadowman52144 жыл бұрын
You definitely made it seem easier than on the live broadcast.... I’ve ordered the parts and will give it a go. Thanks Shaun
@AlvisMridha44 Жыл бұрын
Any way to work this on a real Bike?
@SpookyMontero Жыл бұрын
Wait this isn’t for a real car ?
@st3vao3 жыл бұрын
on question. can the leds be used to display the current gear you are on, like 1 led 1st gear... and so on? thanks!!
@sergillevot1917 Жыл бұрын
Cool video! How many LED can you you run directly from the USB (without external power supply, y want to add a 60led for flags behind my monitor, is that possible? Or is it too much led? Thank you!
@slipstreamautosport4 жыл бұрын
Thanks for this 😀
@GrandTheftHollow5 ай бұрын
Great video, theres options to even buy the arduino nano thta comes with the screw expansion boards so you don't have to solder anything! My arduino nano required me to play around with the bootloader settings, but apart from that everything went smooth, thank you so much!
@TheSimpit5 ай бұрын
That's great to hear, thanks!
@nextrider1232 ай бұрын
Im here a year later trying to upload a new sketch and windows made these cheap arduino nanos impossible to use bc of a "fake ch340 chip"
@JoyKazuhira Жыл бұрын
Thank you so much. I ordered only 2x of 8bit ws2812, 16 LEDs to use on my f1 set up and maybe carve a small thick MDF board to case the whole thing. It cost me a total of 7usd.
@RogjosGamingGadgets4 жыл бұрын
That is a pretty cool little project. Not too complex and very functional. Thanks Shaun. I might try this myself once my rig is all finished.
@kenbell60414 жыл бұрын
Love the stuff you do Shawn BUT, you really cannot solder to save your life. Please ‘tin’ all parts to be soldered first, then solder with just a little more heat than you do now. You can see if its a good joint by looking at the joint:if its shiny it’s good. If its dull it’s bad joint. Sorry to point out but you need to improve!
@panerista19794 жыл бұрын
Really cool video! Build a pretty nice rev and flag indicator with this as an inspiration. Keep on going! Thumbs up an best regards from Germany. :-)
@yessir209er2 жыл бұрын
100k sim lol 😂
@lloydlucas67193 жыл бұрын
Hi, great info. I have a question though. Can I use a micro instead of a nano? Or do rgb only work with the nano. Thanks
@justinrolon46433 жыл бұрын
Can u do one for a stock or build car ..like stock subarus ..should do video on a car connecting to car ecu ..I'll be pumped
@davecamyt4 жыл бұрын
Awesome video Shaun 👍
@michealpayton21484 жыл бұрын
Thank you shaun. Gave me some ideas here. Might have to share my button box with you when I finish the upgrades :-)
@BlackCatRedScarf3 жыл бұрын
Is there a version of it compatible with tachometer signal to be used on vehicles? 🤔
@ProSimRacing4 жыл бұрын
Hey Shaun, you got me pumped to give this a try sometime. It's been a while since I had a bit of fun with a project like this, great video buddy.
@nflisrigged13954 жыл бұрын
I upgrade my wheel shaun to a TS-PC Be here Sunday! Can't wait :-)
@creditableme14 жыл бұрын
AWESOME STUFF! New to Sim racing and stuff like this helps take it to that next level. Keep these videos coming.
@david90rs7 ай бұрын
arrrrdddduino dio boia.. pronunciatelo bene
@amsterdan90964 жыл бұрын
Excellent and informative little video! Now I just need to come up with a cover story to tell my wife for why I suddenly so urgently need to go to the hardware store!
@3rakshitiyengar1543 ай бұрын
Aree takle how to install it in car who will tell
@joseluisureno4444 жыл бұрын
Could this work with the signal from a tachometer, to use it in a real vehicle?
@brayan_m3 жыл бұрын
Would it work on both a computer and a PS4?
@LionheartRacingSeries4 жыл бұрын
Awesome video! Looks like a fun project.
@blaknift4 жыл бұрын
This looks amazing. I think I will have to do this along the bottom bezel of my sim monitor. Maybe small ones up the sides too for various different things. Maybe Lockup and TC indicators for GTE cars.
@twistedturtle5885 Жыл бұрын
Can you do the same thing to add brake lights also?
@TheSimpit Жыл бұрын
Yes, you can through simhub
@twistedturtle5885 Жыл бұрын
@@TheSimpit will I need 2 separate arduinos or can use same one?
@TechiePocket14 жыл бұрын
I just thought about this the other day! Thanks
@randallhicks95594 жыл бұрын
Love the DIY! I made one and it works great and it was easy.
@2909865804 жыл бұрын
How to install to motocycle with signal line?
@The412P4 жыл бұрын
This is the kind of thing that made you a Legend, Sir. 👍
@justinrolon46433 жыл бұрын
Can u do this on a actual car not just game
@EvilB34ns4 жыл бұрын
This is really cool, Shaun. Thanks!
@ericwhiting1004 жыл бұрын
Nice redo of the live stream Shaun. All the parts for this are in my Amazon cart waiting to check out. Can’t wait to see what other DIY projects you have in store for us. Thanks for all you do in the Sim racing community
@vrracegirl46584 жыл бұрын
That looks awesome, I think I'll give that a go! Thanks Shaun!
@osamazaher23613 жыл бұрын
Can that work into a car Rpm ??
@shaned97574 жыл бұрын
Does simhub work for xbox?
@diyer11903 жыл бұрын
very details,thanks
@raypeasley4 жыл бұрын
more more more Shaun great stuff
@osiris53152 жыл бұрын
Great tutorial!
@raymhuang4 жыл бұрын
Thanks so much!
@STANGKILLASS4 жыл бұрын
LOVE THIS! great price, and even i can do it. keep this stuff coming!!!!!!!!!!!!!