Sim Racing Rig Build Part 3: Ricmotech RS1 FINAL ASSEMBLY AE23

[@detoditicocr]

I have been looking for ideas for a DIY Sim Rig for a couple of months now, I have watched as many builts as possible even from people in countries I have no idea the language they speak and I have to be honest, this is the best I have seen out there, the atention to detail, the effort and patience, that right there is the perfect example on how you have to take on a proyect no matter what it is. Be very proud of your self, that is an amazing job

That's a great build we'll documented not breaking the bank either. Very much along the same lines that I'm planning when work eases off for Christmas.

[@renobtankit6019]

Very nice build, you did a great job. I'm a woodworker and i will be building this out of some nice hickory and putting on a multi coat clear finish, I will not be using screws I will use dowels hope to to start in a few month. thanks for the vid, it looks great. I'm building myself a new shop 25x35 and it will live in there with my gaming rig..

[@bad51501]

You have built the best looking racing setup I've seen on KZbin! Very professional looking

[@kimigg4810]

I think this is the best simulator DIY video and I liked it very much, with ingenuity and creativity, thanks for comparing it with AutoExistence, it does not matter the low budget because the low budget is the reason that wonderful things are done like your simulator. Necessity is the mother of creativity. BEAUTIFUL JOB ! Blessings from Mèxico Pienso que este es el mejor video DIY de simulador y me ha gustado mucho, con ingenio y creatividad, gracias por comparirlo AutoExistence, no importa el bajo presuuesto porque el bajo presupuesto es la razòn de que se hagan cosas maravillosas como tu simulador. La necesidad es la madre de la creatividad. HERMOSO TRABAJO ! Bendiciones desde Mèxico.

[@autoexistence8902]

Thank you so much

[@ДмитрийГерасимов-и8г]

@@autoexistence8902 Hello, sorry you don't have any sizes left. Could you share them? My e-mail) [e-mail]

[@SuP3rF1y]

i think i would raise the whole rig up another 8" to make it easier to get in and out

[@bobmcl2406]

That is terrific work! Your finishing with carpet, vinyl, and that red piping is top notch. This is also the first RS 1 build video where I see all the effort to route and hide the wiring. You did really well. Thanks for sharing.

[@autoexistence8902]

Thank you very much!

[@1sinister80]

This turned out amazing I'm proud of you. For somebody who didn't have any upholstery knowledge before hand this could sell for more than one of the metal tube set ups and those are in the 1500 dollar ball park.

[@ziggyinthecut]

Wow amazing! Having the knowledge, ability, space and tools to pull this off is actually very impressive. Nice work man!

[@jademonkie]

Excellent series! Great craftsmanship on your part too, for the extra design elements that you added.

[@lesliewatts7537]

Very professionally done....................... congrats.

[@joncochrane8189]

Watched all 3 parts, and great job - rig turned out great. Just started my build Saturday and looking forward to finishing it, but taking my time as well. Love what you did on the "side pods"!

[@autoexistence8902]

Thank you very much!

[@dmiitry2591]

Молодец парень, правильно сделал, очень качественно выглядит, уверен, он доставит тебе удовольствие такое же, как при постройке

[@FreeformRock]

Fantastic job man. You really build something to be proud of.

[@rangerstrangerdanger4359]

This is absolutely amazing. From all the RS1 builds I've seen, yours definitely looks the nicest. Sweet idea on the additional side panels to hide the screws. Can't wait to get my plans this week.

[@masonkaplan9969]

Great Job dude. Really admire your work. I think I might work on getting you a sponsor so you can have an even better rig. You are the mother of creativity.

[@lrs1410]

I watched all 3 parts now and i gotta say you did a great job, very well done, loved these videos. I subscribed :)

[@voodoo7008]

Really nice job. You have skills, and pay attention to detail. My rig is store bought, and it’s a pain in the ass to get in, and out of. I may look at installing some butt kickers on mine.

[@taxi615]

I was thinking of getting the pans to this and after watching your 3 video's I will defiantly do it and you gave me ideals to finish it off nicely. good job.

[@brianc1701]

Outstanding job on the Bronco simulator, my friend! Thanks for posting. Did not know Ryobi made a cordless glue gun, glad you figured out the pliers method of avoiding finger burns! Keep up the great work, can't wait to see what you tackle next.

[@autoexistence8902]

Thank you so much!

[@superstitionlabs8111]

my man killting it

[@mar56313]

Well done. It looks very professional.

[@corzinc]

I’m going to build one of these now, I have the PVC one now but this looks so much nicer. You motivated me buy the finish of yours, it cane our really nice!

[@cnyautosales382]

Please post more!

[@johnbrush558]

Sick going to get plans

[@dinvision2410]

Nice Work !!

[@daddysdust]

You do very nice work!

[@mjh4892]

Man, I love the inverted pedals and all the trim work you did on this. I’m seriously considering this build. I’m not way tall but even at 6’1, I think I’ll have to modify the plans to get the wheel deck up to a better height. Great job!!!

[@autoexistence8902]

If you purchase the plans from ricmotech there is a tall man option on the “blueprint” that your receive

[@mjh4892]

Perfect! Thanks so much for letting me know that. Onward!!!!!

[@clemtiti1238]

Super boulot bravo

[@josecaballero9017]

My respects friend, great job, today I just got a racing simulator that I bought, but this one that you did I like very much thanks for your videos

[@e.j4072]

Nice job! Im wanting to do this now...

[@burningclutch6796]

good work man, looks amazing

[@ericcoreas7959]

Dude Yours is the best one I've seen! Kudos to you bro!

[@r3bus77]

Congratulations nice job. I noticed that you complained about the position of both the pedal and the seat. With this DIY station, I believe you have a lot of opportunity to improve the problems you have encountered with improvements. I really like how you put the carpet and the vinyl and the red cord as an ornament. Have fun. Greetings from an Italian simracer.

[@RADOMIRATA]

Great job

[@iSpike]

🏎️🏁 So very well done mate 👍🏻 New subscriber here. Cheers from Western Australia 🇦🇺✌🏻

[@heyitsmcphail]

Came out so solid! Great work!

[@chuckboehner489]

awesome job

[@RVRCloset]

Nice rig build!

[@autoexistence8902]

Thank you very much!

[@DTRAX33]

very nice build,

[@esmokebaby]

I would love to built this. But I play more than just racing games. So I would need to make it a little wider to hold a mouse and keyboard. I'm at a lost on how to do it. So it's not a pain in the ass. To Dismount and mount the wheel

[@dogukanhd838]

great job

[@stevechang6677]

Hi, could you add links for the various units in your build, like : plans, the black vynal and the red cord, the vibration thing (to feel the vibrations). On a closing note " You did an amazing build good quality sound and video thumb up

[@roseberry4228]

you are the man!

[@jimschaef]

This series is super helpful 🙌🏼 I’m starting my RS1 build next weekend. Which size did you choose to build? I’m 5’9” as well and I’m wondering which size to choose on the cutting template.

[@autoexistence8902]

I’m 5’9” also and I did the smaller size. It wouldn’t hurt to go larger tbh

[@jimmcd1992]

Great Video, really well made I actually thought this was a much bigger channel going by the quality of the videos. I'm definitely going to upholster mine now too when i get around to making it. a couple of GTI stickers off eBay would look great on the side as well 👍

[@dominic4414]

nice design

[@jerrymilam5876]

Great work ,you need to give yourself more credit.If you were selling your unit on e-bay or what ever I would buy it,mainly because of the way you nailed your pitch. I love how you Incorporated the tactile transducer ,good idea.Keep the good things coming . P.S.You sold me.I am now a subscriber

[@agustinjimenezrodriguez7803]

Genial 👍🏼

[@90myaz]

Nice bro.. btw can you show me the wiring figure for butt kicker connect to amp and what type amp you used?

[@michalvalta5231]

I wonder how much this cost in materials. I am in the process of building my own rig with aluminium extrusions, so far it looks like $300-$350 for materials + I am gonna get a seat from local scrapyard for cheap or maybe even for free. So it should definitely be under $400 and very very sturdy.

[@taylorpeele7069]

What did you use for the red piping?

[@judahhaynes4694]

Hey man i'm doing the same thing but cant get the right angle for the pedals what angle did you mount them on?

[@autoexistence8902]

I didn’t measure an angle, it was how it was assembled per the plans I purchased from ricmotech

[@wileymullinax6068]

It came out awesome!! I'm definitely going to try these blue prints. Also do you wish the wheel was a little higher?

[@autoexistence8902]

I ended up lowering my seat, and its feeling much better!

[@rodrigopadillamanzano1434]

where u buy the seat ?

[@sambaraka5228]

Cool rig. How much did it cost?

[@TURRKOO]

Whats the total lenght x width x height on rig?

[@AlewixCrazy]

como hago para adquirir los plano? soy de Argentina pero no puedo comprar en la pagina. alguien me podría ayudar? me gustaría hacer este simulador. gracias.

[@markbridle9329]

Great job, is there any mileage in crating a bare skeleton frame to ensure you fit the rig first? Then when you build it you know all the controls, seat and TV are in the optimal place.

[@haydentaylor66]

Where can we get the plans to make one?? Thanks

[@streamnl4539]

do you have construction drawings? with the sizes?

[@T25de]

StreamNL Yes The kit comes with full sized templates Richmotech.com DIY rig

[@tigerbalm666]

You forgot som LED ambient lighting!

[@xkastl3z]

How’d you make the decorative cutout? This video inspired me to probably go this route? Pretty detailed instructions especially for the carpeting and wrapping of the pieces!!

[@autoexistence8902]

I just used a flush trim router bit and cut an additional piece of mdf with the original shape.

[@xkastl3z]

Gotcha cause it fits quite nicely and hoping for the same result! I have a DIY rig already made which is nice cause I’ll be able to take time with starting this one! 👍👍

[@xkastl3z]

And also the monitor stand was that the one included in the original blueprints or did you just make your own?

[@autoexistence8902]

The blueprints were provided with the purchased plans from ricmotech

[@frivet-_-fr2377]

Do you have any plans ? I would like to reproduce your simulator ;-) Sincerely

[@autoexistence8902]

The plans I purchased from ricmotech

[@fsb_-bf3th]

Where’s the Bronco?

[@anthonyw1838]

Are you using the Logitech G27 ON A PS4

[@autoexistence8902]

No unfortunately I’m saving up to upgrade

[@thegaminggazza8000]

screen to high you fov is off but other than that great video :)

[@dannychisholm188]

What seat are you using

[@autoexistence8902]

Cheap eBay seat

[@chinojesus2859]

Link seat

[@PL-sj9pu]

Does anyone want to send me these plans if they have them ?

[@YA-tr1lb]

Can you send me that plan pls i like you video i want make same

[@kamramamin7822]

I think height of this rig is about 30 inch is best for 6 feet height person i am build.this for me my height is 6 feet

[@polos8416]

share the plane please

[@ravey1981]

Wheel is far to low. Top of wheel should be 3 inches below your eye line

[@autoexistence8902]

I just lowered the seat

[@vimalmaharaj4211]

Hey bro can you send me the blueprints for your build I love it

[@autoexistence8902]

Thank you, the blueprints aren’t mine unfortunately so I’m unable to just give them out. I purchased the plans from Ricmotech. They are cheap and very comprehensive.

[@platinbullet]

U build a nice Rig but u play a Arcade Game like GT6? I don't get it

[@autoexistence8902]

It’s just for fun and a fun project to build the rig, I’m not super serious into sim racing.

[@thebandit1324]

Your seat is too close to wheel because pedals aren’t adjustable.

[@de5letras1]

Willyrex are you? ... or are you just the clone? 🤔😀

[@jamesdonnelly5794]

Lol u have money

[@autoexistence8902]

**DIY entire build instead of spending thousands on a manufactured rig** “lol you have money” 🤦🏻‍♂️

[@TheDutchGamingMan]

doesnt look comfy at all.. legs way too stretched out. wheel very close to your chest and you sit very upright. maybe its me, but it doesnt look very comfy too race with this rig

[@JasonECI]

I think you can quit your job and start a new business of your own. Wonder if you've compared subwoofer instead of the transducer? Pros and cons? Or subwoofer simply doesn't work?

[@Paul_85-]

Fuck that just bite the bullet and buy a proper racing rig there only like 500 . Also update that dinosaur of a wheel

[@autoexistence8902]

Not all of us have the money to blow on brand new equipment.

[@erlandskoglund7491]

tf with the background music man. Are u building sim rig or or a cow barn.